How to wire up a bt telephone line cord?

The damaged line cord on my BT Relate 2100 has a RJ11 on one end and (I think) a BT431A plug on the other end. It is a 3 core cord (Yellow / Red / Black) and I need to know if I can get a new cord that is the same 3 core. I bought one from ebay and then found it was only 2 core and it didn't work.
I have a repair kit that will attach a BT431A plug to my old cord but I don't know which of the colour wires attaches where on the 431A plug end.
Thanks for any help......

Settings>Mail, Contacts, Calender then below you will find Signature and change it to your signature. You can use scanner on printer to sync to computer so computer can sync it to iphone.

Similar Messages

How do I run a new phone line from the ONT?

I want to move my phone plug to a different room. So I will have to run a new line from the ONT? I have a traditional 4 wire telephone cord, but the wires don't match up. Can use the test port? Or how else would I do this?

sean43245667 wrote:
I want to move my phone plug to a different room. So I will have to run a new line from the ONT? I have a traditional 4 wire telephone cord, but the wires don't match up. Can use the test port? Or how else would I do this?
It will cost you to add a line. The test jack might work. I was actually unhappy to see that when they replaced my BPON ONT with a GPON ONT that it went from have conventially modular jacks to having wire posts for the phone line.
Choices inlude.
paying verizon to run wire
trying to wire to the ont yourself
putting a spliter/adapter somewhere on the existing wire to your new location
trying the test jack.

How can I get a new overhead line replaced?

Hey guys, I suscribed to BT infinity two months ago and I've noticed that everytime it rains my internet is knocked offline. Yesterday my area was battered with rain and wind all day and my internet disconnected 6 times an hour as the light kept going orange showing the annoying router walkthrough page. I've located the source where the wire is exposed and its at the top of the house:
Now I flagged this up to BT two days ago via the online chat page that was sent through twitter but I've not recieived a reply after 48 hours. DLM also has kicked in reducing my speed from 78mbps to 74mbps. I know that from reading these forums, once the speed goes down it stays down forever. I'm now considering turning off the HH5 to stop the speed plummeting even more until this is fixed. Now the question is if I were to replace the whole line, is it possible for BT to restore the speed back to 78mbps? And how do I go about changing the line? Also I believe as it is outside the demarcation point, it's upto BT to fix it and I should not be charged for it?
Cheers guys
Solved!
Go to Solution.

Thought I'd give you guys an update, I tweeted BT a few days ago and filled in the online form. They finally rang me back today and it was a fella from Ireland! He saw on the system that I had many intermittent line faults and broadband kept knocking out so I'm having an engineer in first thing Monday morning!
So a word of advice guys, best thing to do is use Twitter and fill in the form and wait for them to get back to you. I don't want to sound racist in any way but it's good to speak to someone who can speak and listen to in English fluently albeit in an Irish accent
I'll let you guys know of any developments and whether my dlm will be resetted once the issue is fixed. It's so sad seeing my speeds drop from 76mb to 54mb over two days of heavy rain
Oh and Btw one question for the pros, my master socket is backwired and I only found this out after my BT infinity installation. To be honest it's not backwired, just that it's crimped through to the extension which was converted into a master rendering my original master defunct. Could I tell the openreach guy to fix that as well or would I be charged for it as it's not a priority to be fixed?

Telephone line

Hello i have been experienceing troubles with both my internet and phone line for a couple of years now. I have contacted support by phone a number of times but they keep telling me to go to my computer and theres a problem with the router, but i have already been through that. A new router was sent to me by the company and connects to all my devices with full bars but i am experiencing rapid loss of connection and sometimes large amount of static in the phone lines. I have been told to get a booster so the connection isnt lost and it would be more stable so i bought a ethernet cable. The cable works great but i am still experienceing connection trouble everything is set up fine but often i still lose connection rapidly and internet is extremly slow. I went outside and notice the telephone line has wires hanging from the box and ice built up inside the wire harneses. A man was sent up to fix this line from the company about 2 years ago when a tree fell down on it during a storm but all he did was push the wires back in the black box and ducktaped a trash back to hold the wires in and said he will be back to finish but never was. Now the trash bag is of the wires and the live wires are all scattered over the woods below my house. I fear this is a fire hazzard and the company did not take this problem to seriously. I asked support if they could send someone up but they said they wont unless i pay them to fix it! I am not shure what to do at this point i feel that i was paitent enough with the company but they do not seem to care or be very realiable at this point, was thinking about switch to atlantic but not shure all i want is the lines to be fixed.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Measure voltage on telephone line without adding noise?

I am using a PCI 6013, and made a voltage divider (two resistors in series - 10MOhm and 1Mohm - so the telephone network doesn't see the additional load) to bring the 40 volt onhook v down to 4 volts for the card to measure (the off hook v will read .5 v down from 5v). I assume I must use the differential configuration to read this value? And how to keep from adding noise to the line?
Any help is greatly appreciated.

Hmmm, are you making a phone tap?
I really don't know anything about telephone line specifications and what are the thresholds between noise and signal, but I do know about the DAQ board! Yes, I would say differential is the best configuration for you to use. This is almost a must to help reject the common-mode noise already on the phone line. It will also produce a lot less noise onto the phone line as opposed to referenced single ended mode. I doubt you'll put much noise on the phone line. You could probe the line with a scope with and without your "project" connected to see how it affects it.
Sounds like fun!
Russell
Applications Engineer
National Instruments
http://www.ni.com/support

How to print the message in 2 lines?

How to print the message in 2 lines?
Here i am having it like this... MESSAGE i000(zm) WITH lv_uname.
here I want to print lv_uname in 2 lines because it lengthy one.
Thanks,
Sridhar.

No man, itas not comming..I am using the below logic to print my message:
CONCATENATE text-I01 lv_printdate1 text-I02 INTO lv_printname
SEPARATED BY space.
MESSAGE i002(zm) WITH lv_printname.
its printing in a single line...

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

How do you find the number of lines in a file?

I need to count how many lines there are in a file, I am using a BufferedReader to read in the data, but how can I find the number of lines?
Thanks

That depends. How do you define a line? Is it a specific number of
characters, a String that's terminated by a newline character or some
combination thereof?

How do I increase the number of lines presented in a drop down list?

When I am entering a single character/number for each of a random selection of three letters in a password verification, I get a drop down list from A to S only, the first 20. Accessing letter T to number 9 means scrolling down. How can I increase the number of lines in a drop down box to 36?

Hi canddski,
If you are taking about an interface on a website, this is up to the ui designer. But there is a reflow that depends on screensize for the Firefox UI.
You can use asp to control the list:
[http://forums.asp.net/t/1970301.aspx?How+can+i+display+selected+no+of+records+from+datatable+using+dropdown+list+without+database+]
but also try asking on stackoverflow.com

How to Increase the Number of Rows/Lines in a document

Dear Experts,
I have pre printed stationary that prints only 5 rows before moving to the next page. How can I increase this to 10 lines or more ?
Regards

Hi Martin,
Which layout is this? Is it the Cheque For Payment? If it is, there is a setting to determine the max lines per page and even if you change the repetitive area setting it will still only print 5 lines.
The setting is in:
Administration / System Initialisation / Print Preferences.
On the Per Document tab, select Cheque For Payment. Change the Maximum Lines field.
If it is not Cheque For Payment, try Jimmys solution. The amount of rows though, is also dependant upon things such as the size of your page headers and footers and how much space is left after they have printed, so if you still can't get more lines per page, make those smaller.
Regards,
Adrian

How can I tell if my phone line is connected to a ...

Hi, I have been trying to find out if my phone line is connected to the street cabinet or directly to the exchange as the checker says I am unable to get bt infinity. The house 2 doors away seems to be able to get it and having looked at the spreadsheet (google fusion table) it says that 42% of line on my postcode are enabled. Is there a way of finding if I am in that 42%. My postcode: tn104pb Hope someone can help Thanks

DeanM wrote:
I vaguely remember being informed that something like 4% of telephone lines in the UK are EO - I'm afraid I don't have any references with which to back that up though
Having worked in that part of the network for many years, I don`t think I remember any personal customers on EO cables.
Office blocks, or old established businesses in city centres, were the only ones. That would account for the 4%.
The lack of flexibility was the main issue with EO cables, with the volume of "churn" of domestic customers, it would not have been practical.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How about some more samsung products in the auctions ? I really don't want to bid on those crappy ipads. How about a better mix of product lines or at least some of your "new" digital coupons geared towards Samsung products????

How about some more Samsung products in the auctions ? I really don't want to bid on those crappy ipads.
How about a better mix of product lines or at least some of your "new" digital coupons geared towards Samsung products????

How about some more Samsung products in the auctions ? I really don't want to bid on those crappy ipads.
How about a better mix of product lines or at least some of your "new" digital coupons geared towards Samsung products????

What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?

What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?
I tried usb modems. They worked ok for 32 bit usb's but Lion only allows 64 bit. I bought one from Best Buy and it works when it wants to. Mostly, it doesn't want to!
Is there a way to connect through a time capsule?

Thanks for that!!
Zoom - 56K V.92 USB Mini External Data/Fax Modem
I didn't look any further than this. I bought this at Best Buy and like I said, it works somesimes. It does not trigger the fax automatically when the phone rings. You need to have it manually answer. In the past, I had the 32 bit Apple version of this external USB modem and it worked without issue.

How do you change the spacing between lines of text?

using Dreamweaver 6 how do you change the spcing between lines of text. Not seeing it as a option in the page properties menu.

Try CSS line-height property.
Kenneth Kawamoto
[link removed by moderator]

How to wire up a bt telephone line cord?

Similar Messages

Maybe you are looking for