How to work on and between Mac Mini and Mac BookPro?

I need to move complex and varied data two Macs (10.10.2), but use one of the display of one of the Macs, or would it be better to create a network via, e.g.: Air Port Time capsule and work ? Please advise how I would set up the most effective and smoothest option.
Many thanks!

Use screen sharing to access, after setting it up with a monitor, KB and mouse, the Mini w/o monitor. Connect both to same network. A wired ethernet connection is faster than wifi.

Similar Messages

How to create shared folder between mac and windows

how to create shared folder between mac and windows

Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

How to sys the apps between mac book running in mac ox lion and iphone 4s

how to sys the apps between mac book running in mac ox lion and iphone 4s

An app written for Lion can not work on iOS of iPhone.
Allan

How do you file share between mac and pc?

i need to know how one can share files between a mac and a pc. my MBP is running os x 10.5.2 and my PC is running vista.
thanks!

Mac/Windows Networking in Leopard
The following articles outline how to set up networking between Macs using Leopard and Windows PCs:
Setting up a Windows computer to share files with Mac users
Setting up a Mac computer to share files with Windows users
Sharing with Windows computers
If you can’t connect to your Mac from a Windows computer
Sharing your computer with others on your network
More information is also available by selecting Mac Help from the Finder's Help menu and searching for the relevant terms such as "windows", "networking", "sharing", etc.
Also read:
Simple guide to Leopard/Windows Home Networking
Written by Intercepter121 and originally posted on the Apple Discussions here.
If your network complies to the minimum requirements described below you should be able to share resources without any need to enter commands in the terminal to modify configuration files in your mac.
Requirements
1. A decent router
2. Mac Os x 10.5.1 installed on your macs
3. Windows XP or Vista
4. Number of network devices <10
5. Some network printers or drives (NAS)
6. A decent ISP offering a good DNS service
<u>General Settings
If your router offers DHCP and any of the device has power saving features there is a risk that the IP addresses are renewed. This can be problematic as the devices keep changing IP addresses. As this is your network is strongly recommended to reserve IP addresses to the MAC (Machine Address Code) of the various devices so that they can power on and off and still keep the same IP.This simple suggestion will greatly improve the browsing of the local network.
Accessing Windows Resources from Leopard with no authentication
Windows
1. Check the settings of the PC and ensure the IP addresses on the local LAN are trusted
2. Activate sharing on the desired devices ensuring the shares are read and write. If you use Vista ensure password protected sharing is disabled.
3. Try to access the windows share from another windows computer if available to confirm no authentication is required
MAC
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go back into system preferences network. On the tab location click edit locations. Duplicate Automatic and call the new location Home. Now select the Home location and go into Advanced-WINS. In the workgroup field enter the same value that is on the other windows computers for example HOME. Now press enter then go back to the main screen. Select Edit locations and delete the location automatic. Now edit your location Home and rename it Automatic. This workaround is a leopard bug described here.
3. Give 5 minutes to allow all the other machines to broadcast their IP address and the other computers should appear on the left side of your finder window. You can now select the shares you want to connect. As no authentication is active if you are prompted with a user name just press OK.
The procedure to access a NAS is the same as above, just ensure permissions are set to files are read/write for anyone to avoid confusion.
NOTE: There is no need to activate SMB sharing if you don't want to allow the PC to read folders on your MAC
Troubleshooting
After you have followed all the steps you don't see any windows PC.
Identify the IP address of the machine you want to connect. In finder select Option+K and enter SMB://IPADDRESS. If you can connect you have a name resolution problem. Go into your router configuration and ensure that the option DNS assigned by ISP is selected and you don't have services like Open DNS in use and fixed IP addresses in that field. Apply the changes and reboot the router. You should start seeing windows PC in finder shortly after.
Your ISP DNS service is poor and you must use Open DNS or similar
If you are forced to use services like open dns you have the risk that the router propagates the DNS servers to your machines. As the implementation of SAMBA in Leopard effectively blocks the MAC to be a master browser for performance reasons you end in a situation in which tiger machines connect and leopard ones don't see a single share. Let's fix it.
1. Go into System Preferences->Network then advanced DNS if you see here the IP addresses of the open dns servers this is the case. Unfortunately you will be forced to change the hosts file.
2.Ensure you have reserved IP addresses to all your machines so that they always get the same IP.
3. Now login into your mac as administrator and go into utilities=>terminal.
4. Issue the following command sudo pico /etc/hosts
5. Now scroll down and enter all the IP addresses and computer names of any device you want to browse
6. Reboot your MAC
The windows devices will now appear in finder and you will be able to connect with Option+K.
You cannot access shares even entering the IP address
You have not reserved IP addresses to each machine. Go into your router LAN set up and make sure that is the case.
Accessing Leopard resources from Windows
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go into System preferences->accounts and click on Guest flag the option Enable guest account to access shared folders
3. Now into System preferences->sharing select file sharing and then options here flag SMB and select the user that has to be logged into the computer when the share has to be accessed. Ensure that the folder you want to share has read/write or whatever permissions you like it to have set for Everyone
You should now be able to see your MAC in the windows network resources and access the shared folder with a double click without any password request.
Troubleshooting
You don't see any MACs from Windows
Check the firewall settings at the start of this post. Then go back to the Network configuration hit advanced and then TCPIP check is using DHCP and not a fixed address. Then check the sharing is set as above with SMB clicked. If SMB is not set you won't even see your mac from windows.
You see the MAC and the shared folders but you can't read or write on it
Ensure you have set the guest account to access shared folders. Then check on the sharing preferences that there is at least one folder with read permission for everyone. The classic case here is Dropbox that leopard sets as read and write for the user of the MAC but no access for other users. You try to click on drop box and receive an error but when you actually try to write a file you can do it. Check the permissions on the subfolders of the share as those permissions will prevail on the home shared folders
FAQ
You may want to do more complicated things, but first ensure you can actually share files without security in place so you can identify the root cause of your possible problems
I want to password protect my windows shares: once you have done the relative set up in windows vista and ensured you can connect from another windows machine you will need to use user name and password of the Vista user to connect.
I want to password protect my MAC shared folders: Go into user account and disable guest access to shared folders is no shared folder has to be accessed without password otherwise leave it checked. Create a new user for sharing (better than giving away your password) so that this user only accesses the folders you want to share. In System preferences network select file sharing SMB and flag only the new user you have defined. Then go back to the folder section and set the permissions you like on the folder you want to share for this newly defined user.
Good Luck

How to work even and odd number query

Plz explain how below worked even and odd query
2 ) why used subquery after from and which time we can use(what time of out put)
even
select * FROM (SELECT ROW_NUMBER() OVER(ORDER BY stud_id) as row ,grno,stud_id from stud_Enrollment) d
WHERE d.row %2=0
odd
select * FROM (SELECT ROW_NUMBER() OVER(ORDER BY stud_id) as row ,grno,stud_id from stud_Enrollment) d
WHERE d.row %2=1

Row_Number function returns the sequential number of a row
(By using partition of a result set, starting at 1 for the first row in each partition)
>> why used subquery after from and which time we can use(what time of out put)
When we need sequntial numbers, we can use row_number function. Put it into derived table and use this derived table after FROM clause (Same way it is used in your query)
CREATE TABLE stud_Enrollment (
grno int,
stud_id int,
stud_name varchar(20)
INSERT INTO stud_Enrollment
VALUES (101, 511, 'Dheeraj'), (112, 521, 'Vaibhav'), (132, 522, 'Lalit'), (124, 564, 'Amogh'), (143, 598, 'Sushrut')
SELECT * FROM stud_Enrollment
-- Result of your table
--grno stud_id stud_name
--101 511 Dheeraj
--112 521 Vaibhav
--132 522 Lalit
--124 564 Amogh
--143 598 Sushrut
-- Now we need to find out the rows which are at even position, ie row should be at position of 0,2,4,6,8 etc..
-- But we don't have sequential number here in your table result
-- So we can create one new column by using row_number function
SELECT
ROW_NUMBER() OVER (ORDER BY stud_id) AS row, --> additiona "row" column
grno,
stud_id,
stud_name
FROM stud_Enrollment
-- We got "row" column in below output
--row grno stud_id stud_name
--1 101 511 Dheeraj
--2 112 521 Vaibhav
--3 132 522 Lalit
--4 124 564 Amogh
--5 143 598 Sushrut
-- Now above table is used after FROM clause. It uses row column in WHERE part
SELECT
FROM (SELECT
ROW_NUMBER() OVER (ORDER BY stud_id) AS row,
grno,
stud_id,
stud_name
FROM stud_Enrollment) d
WHERE d.row % 2 = 0
--row grno stud_id stud_name
--2 112 521 Vaibhav
--4 124 564 Amogh
-Vaibhav Chaudhari

How do I share files between Macs?

I have a new Mac running Lion. My wife has a MacBook running OS X 10.6.8.
How do I share files between the 2 machines. Her laptop shows up in my Finder and my Mac shows up in her Finder. We try to copy files and it looks like they are copied (using iPhoto export), but there is nothing there. When I try to browse her laptop from my Mac, I am told I don't have permission.
Is this something that can be done? I would like to think so.

Target disk mode is one way: http://support.apple.com/kb/ht1661
Another way:
Drop files in the user/Public Folder
Make changes in >Preferences>Sharing

Connection between Mac BookPro (early 2011), a Thunderbolt Display and a Wacom Cintiq 22'

I want to connect my Mac BookPro (early 2011) to a Thunderbolt Display and a Wacom Cintiq 22'. My Cintiq is connect with a DVI-Thunderbolt-Adapter to the Thunderbolt Display. The Cintiq-Display shows nothing. Is this connection impossible or do I something wrong?

You can't connect a non-Thunderbolt display or adapter directly to the port on the back of a Thunderbolt display. It will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the two displays.

How to exchange big files between mac users through the internet?

How can we send and receive big files between Mac users (apart from Dropbox) ?

If you aren't on the same local network (which I assume you aren't), then the easiest solution is to use Google.
If you simply google "sending large files" you will get hundreds of suggestions/applications.
Ie Dropbox, Google, YouSendIt, FTP, etc

Can anyone explain how this works (vlans and bridge groups)

Can someone please explain how this works...I have started to have problems but nothing changed. My problems are vlan1 and 1000 getting blocked on the switchport where the root bridge is attached.
ROOT BRIDGE:
ssid state
station-role root bridge
rts threshold 4000
concatenation
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
no snmp trap link-status
bridge-group 1
bridge-group 1 spanning-disabled
interface Dot11Radio0.911
encapsulation dot1Q 911
no ip route-cache
no snmp trap link-status
bridge-group 5
interface Dot11Radio0.1000
encapsulation dot1Q 1000
no ip route-cache
no snmp trap link-status
bridge-group 2
bridge-group 2 spanning-disabled
interface Dot11Radio0.2001
encapsulation dot1Q 2001
no ip route-cache
no snmp trap link-status
bridge-group 253
bridge-group 253 spanning-disabled
interface Dot11Radio0.2120
encapsulation dot1Q 2120
no ip route-cache
no snmp trap link-status
bridge-group 7
interface Dot11Radio0.2330
encapsulation dot1Q 2330
no ip route-cache
no snmp trap link-status
bridge-group 3
bridge-group 3 spanning-disabled
interface Dot11Radio0.2336
encapsulation dot1Q 2336
no ip route-cache
no snmp trap link-status
bridge-group 4
interface Dot11Radio0.2350
encapsulation dot1Q 2350
no ip route-cache
no snmp trap link-status
bridge-group 6
interface Dot11Radio0.2901
encapsulation dot1Q 2901
no ip route-cache
no snmp trap link-status
bridge-group 255
bridge-group 255 spanning-disabled
interface Dot11Radio0.2902
encapsulation dot1Q 2902
no ip route-cache
no snmp trap link-status
bridge-group 254
bridge-group 254 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
interface FastEthernet0.1
encapsulation dot1Q 1
no ip route-cache
no snmp trap link-status
interface FastEthernet0.911
encapsulation dot1Q 911
no ip route-cache
no snmp trap link-status
bridge-group 5
interface FastEthernet0.1000
encapsulation dot1Q 1000 native
ip address 10.0.32.10 255.255.255.0
no ip route-cache
no snmp trap link-status
bridge-group 1
interface FastEthernet0.2001
encapsulation dot1Q 2001
no ip route-cache
no snmp trap link-status
bridge-group 253
bridge-group 253 spanning-disabled
interface FastEthernet0.2120
encapsulation dot1Q 2120
no ip route-cache
no snmp trap link-status
bridge-group 7
interface FastEthernet0.2330
encapsulation dot1Q 2330
no ip route-cache
no snmp trap link-status
bridge-group 3
interface FastEthernet0.2336
encapsulation dot1Q 2336
no ip route-cache
no snmp trap link-status
bridge-group 4
interface FastEthernet0.2350
description 81 River Rd - Labor
encapsulation dot1Q 2350
no ip route-cache
no snmp trap link-status
bridge-group 6
interface FastEthernet0.2901
encapsulation dot1Q 2901
no ip route-cache
no snmp trap link-status
bridge-group 255
bridge-group 255 spanning-disabled
interface FastEthernet0.2902
encapsulation dot1Q 2902
no ip route-cache
no snmp trap link-status
bridge-group 254
bridge-group 254 spanning-disabled
interface BVI1
ip address 10.0.32.10 255.255.255.0
no ip route-cache
ip default-gateway 10.0.32.1

NON-ROOT BRIDGE#2:
ssid state
station-role non-root bridge
rts threshold 4000
concatenation
infrastructure-client
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
interface Dot11Radio0.1000
encapsulation dot1Q 1000
no ip route-cache
bridge-group 254
bridge-group 254 spanning-disabled
interface Dot11Radio0.2001
encapsulation dot1Q 2001
no ip route-cache
bridge-group 252
bridge-group 252 spanning-disabled
interface Dot11Radio0.2336
encapsulation dot1Q 2336
no ip route-cache
bridge-group 251
bridge-group 251 spanning-disabled
interface Dot11Radio0.2901
encapsulation dot1Q 2901
no ip route-cache
bridge-group 253
bridge-group 253 spanning-disabled
interface Dot11Radio0.2902
encapsulation dot1Q 2902
no ip route-cache
bridge-group 255
bridge-group 255 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
hold-queue 80 in
interface FastEthernet0.1000
encapsulation dot1Q 1000 native
no ip route-cache
bridge-group 1
interface FastEthernet0.2001
encapsulation dot1Q 2001
no ip route-cache
bridge-group 252
bridge-group 252 spanning-disabled
interface FastEthernet0.2336
encapsulation dot1Q 2336
no ip route-cache
bridge-group 251
bridge-group 251 spanning-disabled
interface FastEthernet0.2901
encapsulation dot1Q 2901
no ip route-cache
bridge-group 253
bridge-group 253 spanning-disabled
interface FastEthernet0.2902
encapsulation dot1Q 2902
no ip route-cache
bridge-group 255
bridge-group 255 spanning-disabled
interface BVI1
ip address 10.0.32.11 255.255.255.0
no ip route-cache
ip default-gateway 10.0.32.1

HT1349 How do I transfer programs between macs without having the serial number?

I previously ordered a 2010 macbook pro and had both microsoft office and aperture pre-installed. I now have a new macbook air and am trying to transfer the two programs over. I do not have the original packaging since they came pre-installed so I am wondering how I can install them on the new mac without the serial number?

Hey kdoy071,
Thanks for the question. Moving your information with Migration Assistant should do the trick:
OS X: How to migrate data from another Mac using Mountain Lion and earlier
http://support.apple.com/kb/HT4889
If you have OS X Mavericks, see this article:
OS X: How to migrate data from another Mac using Mavericks
http://support.apple.com/kb/HT5872
Note that if your previous software is not compatible with the new system or OS, it may not function properly.
Thanks,
Matt M.

How do I sync calendars between Mac (OS10.6.8) and iPad (iOS7.1)? using iTunes (v 11.1.15).

I have an iMac (model 8.1, OS X v 10.6.8) and an iPad 2 (iOS 7.1). The calendars no longer sych via iTunes but did about 6 months ago. I think that may have been when I updated the iPad OS. None of the instructions I've seen on-line seem to help. When I attach the iPad to the iMac via a USB cable I get the following message in iTunes - > Info - >Sych Calendars, "Your calendara are being synced with your iPad over the air from iCloud. Over the air settings can be changed on your iPad." I do not have an iCloud account. According to the Apple Support website, "To use iCloud, you must have at least iOS 5 on iPhone 3GS, iPod touch (3rd generation), iPad, or iPad mini; or at least OS X Lion v10.7.5 on a Mac." I'm not sure my iMac can support that OS due to its age. Besides, I used to be able to sync the calendars so why bother with iCloud? It just seems like one more step.
Also, I've never been able to sych the mail content between the two machines. The message below the iTunes->iPad->Info ->Sync Mail Accounts says, "Syncing Mail Accounts syncs your account settings, but not your messages...." Any instructions on how to sync the messages would be appreciated too.
It's frustrating to have these syncing challenges. I had a Palm Pilot at work about 15 years ago and and it synced with the PC any time I put it into the docking cradle. Same thing with a work-issued Blackberry about 10 years ago. I'm disappointed that the Apple systems seems to be so convoluted and un-user friendly. Syncing calendars worked when I orginally got the iPad about two years ago but now doesn't seem to sych. What am I missing? Thanks in advance.

Hi crispinfromab,
If you are having issues syncing your calendars via USB, you may find the following articles helpful. If you do not have an iCloud account or don't intend to use it for syncing, you may also want to make sure that iCloud syncing is turned off on your phone (under Settings > iCloud).
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Regards,
- Brenden

How do I share presentations between Mac and PC via email

I have a PowerPoint (2010) presentation that was created on a PC and want to share it via email with users who may be on Macs.
The catch is that it contains several "embedded" You Tube videos. The videos play on my PC, but not on my Mac (just a black screen). I understand this is because the presentation actually "links" to You Tube instead of "embedding" the videos, and the links don't survive when the presentation is opened in PowerPoint on the Mac.
I've updated the presentation in Powerpoint for Mac (2011) so it will play on both platforms by downloading the presentations from You Tube, converting them to MP4, and embedding the converted videos into the presentation. However, this results in a HUGE file sizes that can't be emailed (e.g., embedding ONE video bumped the file size from 2M to 17M). Plus, there may be copyright issues.
I've also imported the presentation into Keynote. There are a few formatting glitches, but the big problem is still the video. I get the following error message for each video during the import process: "Import Warning - The movie"/embed/xxxxxxxxxxxxxxxxxxx" couldn't be found.". Plus, I couldn't find any way of re-linking the videos in the Keynote version of the presentation.
I've also tried making a video of the presentation, but had problems with the "embedded" videos once again, and never got far enough to see if this would result in acceptable file sizes.
One other thing. The author does not want to put the presentation up on the web or some other shared facility for security/confidentiality reasons.
So, has anyone solved this problem?
Any help would be greatly appreciated.

I suggest you post your question on the Microsoft Mac Office forums as that's where the Office gurus hang out...
http://answers.microsoft.com/en-us/mac

How do I share printing between mac and Vmware Fusion?

I am trying to print from mac and from Windows XP installed in a virtual machine via VMWare fusion on my IMac. If I am able to print from Mac then when I switch over to Fusion and try to print it errors stating the the printer is disconnected. If I disconnect the USB and reconnect then it will print. Same with mac if it is printing okay on Fusion and I try to print from mac it acts like it is printing but it is not sent to the printer, if I disconnect the USB and reconnect then it prints. Printer sharing and window sharing is on. Any suggestions?

I suggest you post your question on the Microsoft Mac Office forums as that's where the Office gurus hang out...
http://answers.microsoft.com/en-us/mac

How to synchronise the fonts between mac and ipad in the keynote app?

I use Keynote on both Mac and iPad machines. Unfortunately, the font set in iPad is quite different than in Macbook and because of that, every presentation must be re-writen while changing the device. This is a bit annoyent and I cannot find the solution.

Only use fonts on your Mac that you know are available on the iPad.
See: http://iosfonts.com/

How to work JQuery and content editor webpart functionality in sharepoint 2013?

Hi all,
I have a requirement to display the list data in share-point page by using JQuery and content editor web-part. could you please any one suggest the process to display the list data using JQuery and ContentEditorWebpart.
Thanks in advance.
Thanks,
phani kumar
Phani kumar

Hi,
From your description, my understanding is that you want to show a list data in a page using jQuery and Content Query Web Part.
You could use SharePoint REST API to accomplish your requirement, please refer to this code below:
<div id="listData">
</div>
<script src="https://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script><script type="text/javascript">
$(document).ready(function(){
//replace your list title
$.ajax({
url: _spPageContextInfo.webAbsoluteUrl + "/_api/web/lists/getbytitle('customlist03')/items",
type: "GET",
headers: {"accept": "application/json;odata=verbose"},
success: function (data) {
if (data.d.results) {
var obj = data.d.results;
for(var i = 0; i < obj.length; i++)
$("#listData").append("<div>title "+obj[i].Title+"</div>");
error: function (xhr) {
alert(xhr.status + ': ' + xhr.statusText);
</script>
The screenshot below is my result:
Please refer to these articles:
Working with lists and list items with REST
https://msdn.microsoft.com/en-us/library/office/dn292552.aspx
SharePoint 2013 – CRUD on List Items Using REST Services & jQuery
http://www.plusconsulting.com/blog/2013/05/crud-on-list-items-using-rest-services-jquery/
You can also get list data using JavaScript Client Object Model(JSOM), you could refer to this article:
How to: Complete basic operations using JavaScript library code in SharePoint 2013
https://msdn.microsoft.com/en-us/library/office/jj163201.aspx?f=255&MSPPError=-2147217396
Here is a link about how to add code into page via Content Editor Web Part:
http://blogs.msdn.com/b/sharepointdev/archive/2011/04/14/using-the-javascript-object-model-in-a-content-editor-web-part.aspx
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to work on and between Mac Mini and Mac BookPro?

Similar Messages

Maybe you are looking for