How to work with Alphanumeric Editor in Screen Painter?

Hello Guys,
I am trying to work on Screen Painter Layout and it's showing me that Graphical Screen Editor is not
available and continue working with Alphanumeric Editor.I don't know how to work on this.Guys,
Please let me know why is the message and what can we do about it.
Thanks in advance,
Sri

Somtimes you will get this message if something got screwy with your SAPgui, for me simply closing out of SAPgui and going back in has fixed this issue. If you do not know for sure that your SAPgui had been installed including the screen painter, then you should start there. You will need the SAPgui installation executable, either from CDs or a downloaded file. Run the SAPgui installation, and make sure to select the screen painter as part of the install, i believe it is under "development tools" in previous versions. In newer versions I believe it is installed by default, but I do no for a fact that it is not this way in earlier releases, such as the 46D gui.
So for make sure that Screen Painter has been installed with your SAPgui, if you are sure that it had been installed, perhaps it was working fine yesterday, then I would suggest first closing out SAPgui, and going back in, and trying the screen painter, If the problem persists, it may be worth it to reinstall the gui.
Regards,
Rich Heilman

Similar Messages

How to declare and work with select-option in screen painter?

hello there,
can anybody plz suggest me ,how to declare and work with select-option in screen painter?
neon

Hi Blue,
Please check these threads which will help you a lot..
module pool programming " to add selection-option on screen"
Re: Select option in Dialog program screen
Re: SELECT-OPTIONS in Screen
Good luck
Narin

Facing problem with layout editor in screen painter .

Hi gurus,
I have installed IDES ECC 6.0 in my home system. Now when I go to layout editor in screen painter, I am getting rows in the screen. As per my knowledge there is an installation problem ..How to rectify that ? Could any one please tell me.
Thanks & Regards
Vardhan

some times SAP Gui behaves like this, in my case i faced this problem many times, some times after shutdown my sap logon pad. and restart the sap , go to se51 , it will open the Screen painter normally. But some cases i uninstalled the Gui, and re installed .then only it opens properly. select all components when installing.

Can any one tell me how to work with field exit????

Hi
Can any one tell me how to work with field exit I know how to create them. I want to know how it works. Actually I want to create a field exit for T-CODE MIRO. Where I want to put the value ebeln of the PO Reference tab into the Assignment of details tab and make Assignment field disable.
Thanks in advance

Hi,
Follow the Steps,
1. Go to CMOD transaction
2. From the menu "GOTO->TEXT ENHANCEMENTS->DATA ELEMENTS-   ->NEW DE CUST DOCU".
3. In the displayed box specify the data element and
   press either "CHANGE" or " Ref to screen" button
4. CHANGE button is for defining the documentation
5. "Ref. to screen" if for assigning the screen in which
   a field has the this type data element.
   Note: You should have used this data element for a
         field in that screen.
6. Now it will ask for Function Module name, specify the
   FM name and double click it. It will go to the editor.
7. Now using the Import parameters code accordingly
8. Activate and go back
9. Now "Assign the created program ( that is FM) to the
   screen by specifying the Program name and Screen
   number.
10. Now save and activate.
Note: No need to create a separate project for creating field exit through transaction CMOD.
I hope this is suffice.
Regs,
Venkat Ramanan

How to work with 360 video?

I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
Thank you,
Phil

Phil,
Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
Drop your movie into a composition and apply CC Sphere to the video.
Then set the Render option in the effect to "Inside".
Under Shading set Ambient to 100% and Diffuse to 0%.
Then scale inside the effect until the image fills the screen.
Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
Let me know if you have any questions!
Trent

How to work with EEWB tool in CRM and how to assign it to PCUI

Hi Friends,
Can any body will suggest me how to work with EEWB tool in CRM to add new fields ,i need to attach the fields to a GUI screen and same to PCUI also,
And how to attach a search help for those fields,is the tool will automatically will create the search helps or it is similar as we do in abap,
So can any body suggest me to get a material on this ,
Thaking you
Regards
Raghavendra Prasad

Prasad
Following are the steps involved in general :
1. Select the filter Worklist and enter your name in the input field of the object list selection. Press the enter key. Your object list is displayed.
2. Place your cursor on the highest node(PROJECT BY XXXXXX). Select Create project from the context menu by right-clicking on it. You see the dialog box Create project.
3. Enter a project name, description, packages, and namespaces for each system used. Leave the dialog box by pressing the enter key.
Specify transport requests. The Project is created and appears in the object list.
4. Place your cursor on the new project in the object list and select Create extension in the context menu. You see the dialog box Create extension.
5. Enter a name and description. Define a Business Object and extension type. Press the enter key.The extension is created and appears in the object list below the project.
6. Place your cursor on the new extension in the object list and select Call wizard in the context menu. The wizard for the extension action starts automatically.
7. Fill in the input fields following the notes on screen and end the wizard by clicking on Complete.The extension tasks have been created and appear in the object list.
Project and extension are created !
Also take care that you have the Transport Requests and Save the Project and Extensions against a Development Class !
In general , EEW will automatically puts the fields on the Screen. We donot want to worry abt that !
The generated BADIs can be implemented to do some Checks(for example) !
I hope this helps !
Thanks
<b>Allot points if this helps !</b>

How to work with DTR and CBS?

Hi
I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
If possible can any one send me the screen shots how to work with these ?
Best Regards
Ravi Shankar B

Hi Ravi
For you to work with DTR and CBS, firstly u will have to configure JDI on server.
To configure the NWDI, please go through the links given below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
In Nutshell, following steps will be performed:
1) logon to Portal Devinf.
2) click on CMS
3) Go to landscape configurator
4) create domain
5) create tracks and add Software components in that track
6) runtime systems ( dev/qa etc are configured
7) in the transport studio, all the files listed are checked in through check - in tab.
8) they move to developement tab.
Once all these things are done, in your NWDS:
1) Setting the devbox host name and server port in Window -> Preferences -> SAP
J2EE Engine
2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
to check whether server is getting accessed from NWDS.
3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
4) In the DC perspective, in the Local DCs view, perform import configuration.
5) the dev track is not configured
6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
Thanks & regards,
Anupreet

How OEM works with database

Hi,
We use OEM (12c),have db (11.2,10.2/1).
How OEM works with database?
When oem initated a job aginst db,What are the steps preformed by OEM?What are the info updated in OEM DB and Normal DB regading jobs?And Where?
Br

At what point do you get this message?
Have a look at the Windows Service. Ensure the EM Agent is running. Your database and Listener may be running, but if the Agent is not running, you will not be able to see correct status.
Stop and start the Agent

How to Work with Composite Primary Key

Hi All,
I'm working with Toplink JPA. Here I have A problem with inserting into database table which have composite Primary Key.
What I'm doing is, I have two tables. to maintain many to many relation between these two tables I created another intermediate table which consists of foreign Keys (reference) of above two tables.
Now these two foreign Keys in the Intermediate table made as composite Primary Keys.
When I'm trying to the data in the Intermediate table I'm getting the foreign Keys values are null..
could anyone suggest me how to work with composite Primary Keys
Thanks,
Satish

I have the same problem, I have 3 tables with a join table joining them all. I have created an intermediate table entity. When I go to create a an entry, it says that I cannot enter null into "ID". Here is the SQl toplink generates:
INSERT INTO Z_AUTH_USER_AUTHORIZATION (CONTEXT_ID, AUTHORIZATION_ID, USER_ID) VALUES (?, ?, ?)
bind => [null, null, null]
Here are the classes:
-----------------------Join Table-----------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER_AUTHORIZATION")
public class AuthUserAuthorization implements Serializable{
@EmbeddedId
private AuthUserAuthorizationPK compId;
// bi-directional many-to-one association to AuthAuthorization
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "AUTHORIZATION_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthAuthorization authAuthorization;
// bi-directional many-to-one association to AuthContext
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "CONTEXT_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthContext authContext;
// bi-directional many-to-one association to AuthUser
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "USER_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthUser authUser;
---------------------------------------User table--------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER")
public class AuthUser implements Serializable, IUser{
@Id()
@SequenceGenerator(name = "AUTH_USER_ID_SEQ", sequenceName = "Z_AUTH_USER_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_USER_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 10)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authUser", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
-----------------------------------Context table-----------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_CONTEXT")
public class AuthContext implements Serializable, IContext{
@Id()
@SequenceGenerator(name = "AUTH_CONTEXT_ID_SEQ", sequenceName = "Z_AUTH_CONTEXT_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_CONTEXT_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authContext", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
----------------------------Authorization table-------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_AUTHORIZATION")
public class AuthAuthorization implements Serializable, IAuthorization{
@Id()
@SequenceGenerator(name = "AUTH_AUTHORIZATION_ID_SEQ", sequenceName = "Z_AUTH_AUTHORIZATION_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_AUTHORIZATION_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authAuthorization", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
I have tried to create the new entity several ways. I have tried to create one with the default constructor then set this entity on each of the other entities, I have also tried to pass in the entities to the join entity and set them there, but this doesn't work. Any help would be very appreciated!
Thanks,
Bill

Hi, help me on how to work with datasets

hi,
this is bsv. can any one help me on how to work with datasets.
regards...
srinivas

Hi,
Use this update statement.
Update
nv2_audit_log
Set
qualifier = replace(qualifier,'NXPRI','NXUPM')
Where
qualifier like '%NXPRI%NXUPM%';
Hope this helps!
Regards,
Rajesh.

Can u explain me how to work with OOPs ABAP

Hi,
Can u explain me how to work with OOPS Abap, If possible pls send me some sample programs regarding OOps concept used in Realtime.
Thanks.

hii,
Please check this online document (starting page 1291).
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Also check this links as well.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.futureobjects.de/content/intro_oo_e.html
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
What is Object Orientation?
Object orientation (OO), or to be more precise, object-oriented programming, is a problem-solving method in which the software solution reflects objects in the real world.
A comprehensive introduction to object orientation as a whole would go far beyond the limits of this introduction to ABAP Objects. This documentation introduces a selection of terms that are used universally in object orientation and also occur in ABAP Objects. In subsequent sections, it goes on to discuss in more detail how these terms are used in ABAP Objects. The end of this section contains a list of further reading, with a selection of titles about object orientation.
Objects
An object is a section of source code that contains data and provides services. The data forms the attributes of the object. The services are known as methods (also known as operations or functions). Typically, methods operate on private data (the attributes, or state of the object), which is only visible to the methods of the object. Thus the attributes of an object cannot be changed directly by the user, but only by the methods of the object. This guarantees the internal consistency of the object.
Classes
Classes describe objects. From a technical point of view, objects are runtime instances of a class. In theory, you can create any number of objects based on a single class. Each instance (object) of a class has a unique identity and its own set of values for its attributes.
Object References
In a program, you identify and address objects using unique object references. Object references allow you to access the attributes and methods of an object.
In object-oriented programming, objects usually have the following properties:
Encapsulation
Objects restrict the visibility of their resources (attributes and methods) to other users. Every object has an interface, which determines how other objects can interact with it. The implementation of the object is encapsulated, that is, invisible outside the object itself.
Polymorphism
Identical (identically-named) methods behave differently in different classes. Object-oriented programming contains constructions called interfaces. They enable you to address methods with the same name in different objects. Although the form of address is always the same, the implementation of the method is specific to a particular class.
Inheritance
You can use an existing class to derive a new class. Derived classes inherit the data and methods of the superclass. However, they can overwrite existing methods, and also add new ones.
Uses of Object Orientation
Below are some of the advantages of object-oriented programming:
Complex software systems become easier to understand, since object-oriented structuring provides a closer representation of reality than other programming techniques.
In a well-designed object-oriented system, it should be possible to implement changes at class level, without having to make alterations at other points in the system. This reduces the overall amount of maintenance required.
Through polymorphism and inheritance, object-oriented programming allows you to reuse individual components.
In an object-oriented system, the amount of work involved in revising and maintaining the system is reduced, since many problems can be detected and corrected in the design phase.
Achieving these goals requires:
Object-oriented programming languages
Object-oriented programming techniques do not necessarily depend on object-oriented programming languages. However, the efficiency of object-oriented programming depends directly on how object-oriented language techniques are implemented in the system kernel.
Object-oriented tools
Object-oriented tools allow you to create object-oriented programs in object-oriented languages. They allow you to model and store development objects and the relationships between them.
Object-oriented modeling
The object-orientation modeling of a software system is the most important, most time-consuming, and most difficult requirement for attaining the above goals. Object-oriented design involves more than just object-oriented programming, and provides logical advantages that are independent of the actual implementation
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For basic stuff......
abap oops
http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
ABAP Business Development and Service Provisioning/ABAP Objects
General information
What is Object Orientation?
some blogs
A small tip for the beginners in OO ABAP
Object Oriented ABAP (OO-ABAP)
and others wiki OO Abap
cheers,
sharad
Edited by: sharad narayan on Apr 29, 2008 12:19 PM

How to work with framewok

Hi,
     I want to create a small program in Xcode which create a excel speedsheet with fiew sheet and put data into sheet using
     VisualBasicforApplication.framework.
     What can i do, so that i can create/write excel files in xcode on Mac OS X?
     Please help me as soon as possible.
Thanks

Originally Posted by skoltogyan
How to work with database in the Teaming ?
I need create some web-forms and store it in the database on the server.
Any example - how i can do this with Teaming ?
Please, Help me.
Serg
Hi Serg,
Not sure what you are looking for and I'm also no dev...
Maybe this link will help : Episode X: Teaming Templates | Novell User Communities

How Ajax works with Struts framework

How Ajax works with Struts framework .
Thanks
Ramki

So we must write file name(like abc.do), If am using struts <html:link > tag like <html:like action="abc" >Click</html:link>, so with ajax we must call like <a href ="abc.do">Click</a> .
But there is a problem, if am using ,
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>/r/*</url-pattern>
</servlet-mapping>
or
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
here i am changing web.xml file based on client interest. At those situation we must change all jsp pages for <a href ="/r/abc">Click</a> .like,.
It's very difficult.
Is any other way to use ajax with Struts (Only struts tags)
Thanks
Ramki

How to work with the Migration tool in SAP BPC from MS to NW

Hi,
I am working in a Migration project from SAP BPC MS to NW.
we are having a migration tool purchaged from SAP.
I don't know how to work with,Could you please help me in this.
Is there any way to do it by Manually?
Thanks and Regards
Krishna

Hi Krishna,
As you are not upgrading your version but you are migrating from one BPC platform to the other, you need to follow all the rules of installing fresh SAP BPC version. As you have not specified from which version you are migrating and to which version, you can refer to the following link for installations and upgrades (You need to login using your S-user ID):
https://websmp203.sap-ag.de/support
Hope this helps.
Rgds,
Poonam

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/

How to work with Alphanumeric Editor in Screen Painter?

Similar Messages

Maybe you are looking for