How to work with both desktop and Surface pro 3

Hello,
I have a desktop for my normal use of Adobe Creative Cloud for Photoshop and Lightroom. I have my lightroom catalog on a separate external drive. I just got Surface pro 3 to do Adobe on it. I am now confused on how to work on Surface and how to access my Lightroom catalog.
Thanks for your help.
Mo

Just install Lightroom on your Surface Pro, plug-in the external drive, and double-click the LR catalog file.

Similar Messages

Is there a way to get a creative cloud license that works with both Mac and PC platforms?

Is there a way to get a creative cloud license that works with both Mac and PC platforms?

Hi there
A Creative Cloud membership gives you access to both the Mac & Win versions of the desktop applications.
Please check the FAQ for more information: Creative Cloud Help | Creative Cloud / Common Questions
Kind regards
Bev

What format do I ned to make my external hard drives to enable them to work with both Mac and PC?

I'd like to format several external hrd drives to work with both my Mac Book Pro and a PC in the house. Disk utility says ok for esFat to wrok with both but techies say format as FAT.
Also, does size of external have an influence on the formatting option?
Thanks. Being a relative newcomer to MAC, I am trying to learn the ropes. Thanks for any assistance you can give me.
TJ

hey
i agree with matt exFat is a hybrid with good compatibility between both windows and mac, but it has this problem with huge cluster size so it'll eat your hdd up.
if you are using it on a single windows pc you can install a HFS+ reader to that windows pc it'll enable you to read the hdd formatted HFS+ but you WON'T be able to write to it!!
anyway it's your choice since both are okay but personally i've formatted mine to HFS+ and installed a reader on the pc

How come a USB will work with both Mac and Windows (as in that there are already files from Windows and Mac can still read and write onto it) but a external Hard Drive won't (as in there are files from Windows on there but Mac can read but not write)?

I have a Seagate Drive that I'm hoping to copy some movies from my Mac onto (because it only has a 512 SSD and I'd rather keep that empty and handy for more readily needed files) but it won't work. It shows up as a drive when connected (with the orange USB drive icon popping up) and is appropirately labeled "FreeAgent Drive", but when I try to copy files onto it it won't work. There are already windows files on there, such as some windows backups and lot's and lot's of pictures and videos. However, I have several USBs which already have windows files on them (namely movies, music, and other stuff) and copying and stuff works fine. Why won't it work with this hard drive and would work with USBs? Please help me out here guys, I am not experienced with Hard disks and formatting and stuff like that. 10 points for whoever helps me out the most. Thanks.

We will need to reformat your EXT, but it will then work on both Mac and Win
Connect the drive to your Mac, open disk utility
Go to the partiton tab and select '1' ... format should be ExFAT ... in options select MBR
Format the drive
It should now work on both OSs; report back

Will an unlocked iPhone 4S work with both CDMA and GSM SIM cards?

I was using the iPhone 4S with a GSM sim card all these years here in India and would like to switch to a CDMA carrier.
Does the phone work with both SIM cards? Or is there a separate model which works with CDMA?
Appreciate all replies.
Thank You!

Hey varun0809,
It sounds like you have a question about the specifications of your specific model of iPhone 4s. Here is an article for you that should be able to help you answer these questions:
iPhone 4S - Technical Specifications
http://support.apple.com/kb/sp643
Cellular and Wireless
World phone
UMTS/HSDPA/HSUPA (850, 900, 1900, 2100 MHz);
GSM/EDGE (850, 900, 1800, 1900 MHz)
CDMA EV-DO Rev. A (800, 1900 MHz)3
802.11b/g/n Wi-Fi (802.11n 2.4GHz only)
Bluetooth 4.0 wireless technology
1GB = 1 billion bytes; actual formatted capacity less.
Actual size and weight vary by configuration and manufacturing process.
CDMA available only if iPhone 4S is sold and activated for use on a CDMA network.
All battery claims depend on network configuration and many other factors; actual results will vary. Battery has limited recharge cycles and may eventually need to be replaced by Apple service provider. Battery life and charge cycles vary by use and settings. See www.apple.com/batteries and www.apple.com/iphone/battery for more information.
Wireless broadband recommended; fees may apply
Some features, applications, and services are not available in all areas. See your carrier for details. Application availability and pricing are subject to change.
Thanks for using the Apple Support Communities!
Cheers,
Braden

How to Build a Flex App that works with both SQLite and MySQL?

Let me explain a bit: I am developing an app that will
be published as an AIR application using SQLite, as well as a FLEX application that will use MyDSQL via web services.
I want to develop both applications in such a way that all the components can be reused, and I only have to do minimal redevelopment. I have started witht the AIR application. Once I have it completed, I want to publish the application (with minimal redevelopment) as a FLEX web app.
My thinking is that I contain the database accesses in the Application, and passing the data via interfaces to the respective modules, as well as receiving data from the modules back to the Application to be written to the database. This was the only changes between the FLEX and the AIR application will be how the database access is handled in the Application file, and I can leave all modules as is and will be able to maximize reusability,
I haven't done this before, and was wondering what the best approach for this is?
Thanks!

It seems very difficult to find best practices on how to structure your database layer in FLEX. None of the books I have go into detail about it, nor do any of the websites I have found so far, including the Adobe Flex tutorials. Sure, they explain how to interact with databases, but don't seem to care about best practices for structuring your application.
Can anyone point me in the right direction for this?
Thanks!

Best Practice to Setup an application to work with both oracle and db2 db

Hi,
We have an application that currently supports both oracle and db2 databases . It is currently using JPA with eclipselink as backend mechanism and we want to move to ADFBc as our backend . So what is best practice to do this?
I came across an old post in https://groups.google.com/forum/#!topic/adf-methodology/UlJZSTu14Io that states to create two different model projects to support oracle and db2 .
Is this still the standard ? Is there a way that we could work around rather than creating multiple projects?
How do i get the view controller to work with multiple model projects if this is the case?
Thank you.

Thanks for the response .
The problem is i would have the same schema on both the databases (both in oracle and db2) .
I don't see a scenario where i want both the application model projects at the same time . What i meant is , Application will either be deployed with Oracle DB or DB2 but not with both on a production environment .
So is there a way where i just change the connection parameters alone rather having two different models ?
If i have to use two model projects , would it be possible say i built the view controller for Oracle , and use it for DB2 if i make sure the BC objects names are similar between model projects and switch just the model jar based on the deployment environment ?
-Sam

Work with both: iPhoto and Aperture (or Lightroom)

I have iLife '09 and the newest MacBook pro with Leopard (last edition) and I am New in Apple Scene.
All my photos now are imported in iPhoto. How can I organize lot of photos, when I want to work with Aperture (or Lightroom)? Do I need then iPhoto? Or only organize all photos in Aperture?

Aperture, Lightroom and iPhoto all cover the same ground in different ways.
iPhoto is aimed at the domestic market. It's very user friendly and works very well with Point and Shoot cameras especially.
Both AP and LR are focussed firmly on the Pro Shooter shooting high volumes of RAW. They both have significant learning curves.
That said, there is much to be gained as an Amateur photographer using either app if you are shooting RAW. Much less so if you you're shooting jpeg.
You can download trials of both AP and LR.
AP works in a limited fashion with iPhoto. You can share your Previews with iPhoto, for instance, and there is a facility to easily migrate from iPhoto to Aperture. You can migrate an entire library or just particular photos.
LR is utterly unaware of iPhoto. There is a third party plug-in that facilitates exporting from LR to iPhoto. There is no easy way to migrate from iPhoto to LR.
Subject to the caveats above about shooting RAW: I would use Aperture as the primary organisational and processing app. I choose AP because it's much more powerful that iPhoto and because it has excellent OS integration entirely missing from LR.
Regards
TD

How netflow works with ASA Firepower and Virtual Defense ?

Hi,
In the discovery rules of the Virtual Defense, i can see that's it's possible to configure netflow source. I have a pair of Cisco 4500X as the core switch L3, and would like to send a flow to the IPS.
I configure the switch like that :
flow record IPV4-FLOW-RECORD
match ipv4 tos
match ipv4 protocol
match ipv4 source address
match ipv4 destination address
match transport source-port
match transport destination-port
collect interface input
collect interface output
collect counter bytes long
collect counter packets long
flow exporter Firepower
source Vlan12
destination IP_OF_tHE_ASA_IPS_MODULE
flow monitor IPV4-FLOW
exporter Firepower
cache timeout inactive 30
cache timeout active 60
cache entries 1000
record IPV4-FLOW-RECORD
vlan configuration 100-102 ip flow monitor IPV4-FLOW input
It's the correct configuration ? Can't see how to check in Virtual Defense if it's receive netflow packets

SOLUTION!
Install a second NIC bind vmnet0 to eth1 instead of eth0
Details:
Goal was to have the Host OS (Ubuntu 8.04) which is running an Apache web server also serve as an e-mail gateway (SpamTitan) since on a heavy day the web server might hit 5% CPU.
Why but a whole new machine, right?
When it did not work right away I went into troubleshooting mode and tried several different things as mentioned above. Which led me to the idea to create my own VM of SpamTitan and bind it to a different NIC.
Before I went that far I tried reassigning vmnet0 from eth0 to my newly installed eth1 and running it. That seems to have done the trick!
So now the setup is:
eth0 192.168.2.4
eth1 192.168.2.5
vmnet0 192.168.2.6
With vmnet0 bridged to eth1
Why is it working now and not before?
I am unsure. It is not a Linux thing because I tried both Windows XP and OS X 10.5 with the same result. I think it has more to do with primary network and associated services than Host OS.
If anyone has any insight please let me know. Otherwise I am going to chase it down later.
Thanks again for your responses!

How to work with crystal reports and boe3.1

Hello!!! Forums,
Please suggest me some tutorials and sample code to work with crystal reports that can be viewed in boe3.1. What software to use to deveelop reports? How to view it in boe3.1?
Regards,
grace

At the top of the forums you will see posts that say read this first, read those first.
[BOE Enterprise|Read Before Posting - Where to find Business Objects .NET SDK Resources;
[Crystal Reports .NET|Read Before Posting - Where to find Crystal Reports .NET SDK resources;
Jason

Working with both aliases and redirection

Hi,
Working with an OS X Server Tiger 10.4.4.
Hostname is 'osxserver' in domain 'beicip.fr'.
I have a LDAP user named 'gardais'.
Mails to this user are redirected to an external mail box.
When I send a mail to [email protected], I get the mail in the external mailbox as expected.
In the mail service, I added a alias to the hostname.
Under 'localhost', I added the hostname 'lists'
Problem is : when I send a mail to [email protected] (same user, same domain but host alias), the mail bounce back and forth between osxserver and our internal mail exchanger.
The internal mail exchanger giveup after about 10minutes of bouncing.
It's like osxserver is trying to send the mail through the relay host without rewriting the destination email address (to forward the mail to the external mailbox)
What did I do wrong for this to work fine with the "official" hostname (osxserver) but not with the alias declared for the mail server.
Please note that the 'lists' hostname is known and declared in a DNS.
Thanks,
Ionel

Instead of "lists" add "lists.beicip.fr"

Need router that works with G4 tower and macbook pro G5

Hi, all,
I work with a group of people and we share our computers when we work on a project. We use my G4 Quicksilver, currently hooked up to a D-Link router DI-524, rev. C. One of our group's laptop died and got a MacBook Pro with Leopard and installed Adobe CS3 (we are using CS2). Problem is the MAcBook Pro keeps losing it's connection, damaging files in Adobe. The router is not listed as compatible with the MacBook pro (same model, rev A is however) so I guess that is part of our problem. I am confused by the variety of products and want to make sure the local network we use functions better. I almost went for the Apple Extreme until I read about possibly needing an enabler. By the way, I am also having trouble with printer sharing, don't know if it is router related as I can most of the time get on line on the Pro and share files - its just that it cuts out unpredictably and causes trauma in the work flow. Since the G4 is the home base, I am posting here. Thanks

It sounds like you have at least two problems: reliable wifi connection and version control. The second one I can just say that when I was an engineer we had a separate software application that allowed collaborative work to be done on a project. It is quite complicated, but only one file could be opened and saved so that a person could do their thing on the file and then save it back to document central. The software would keep track of everything and make sure things were saved properly, etc. If disaster struck, you could still revert to the last version and not have to start over.
The unreliable connection is a fairly common problem. My wife's MacBook Pro is at the other end of the house. The path loss between her machine and the router is significant. Because the Pro has a built in antenna, it's not the best in the world for reception or transmission. I ended up putting a USB WIFI stick on her Mac. I also put it on the end of a USB cable so that I could hoist and move the stick around to get best performance. I'm not aware of any compatibility issues between Macs and routers, but my router is a plain Jane DLink 514 and my iMac, G4, PowerBook Pro, and my Windoz machine running Ubuntu on it are all happy. BTW, I also had to put a USB WiFi stick on the Windoz machine and with the constant internet updates I need for Ubuntu, the connection only occasionally is messed up.

Bluetooth not working with car audio and macbook pro ret

I use Iphone 5 and macbook pro ret with 10.8.2. but I cant pair it via Bluetooth with any other item (Mercedes Comand). Not even with the Mac. very unhelpfull with a new phone and new apple macbook. what can help

iPhones have NEVER paired with laptops except for the sole purpose of tethering. Have you read your Mercedes operating manual and made sure the Command is in pairing mode?

How do i format my usb drive so that it works with both mac and pc?

if you could please explain the process that would be extremly helpful...thanks!
iMac 17" Mac OS X (10.4.8)
iMac 17" Mac OS X (10.4.7)

Please search the discussions before posting. Your question has been asked and answered many times. It could save you time in the future.
Attach the drive to the PC and format it as FAT. Or use Disk Utility on the Mac and format it as "MS-DOS" which is in fact FAT.

How Mail work with image attachements and HTML image ?

Hello,
I'm writing an application that sends html emails with images to Mail.app. When Mail display the mail, everything is okay, images are correctly embedded in html code, using inline attachements.
But there's still a problem : The images are also displayed at the bottom of the email, as file attachements. I know that Mail's template can hide these attachements, but I cannot reproduce it when sending my own emails.
Is there anybody here that already get such problem and find the solution ? (apparently, Windows User get the same problem with Outlook, but they have an API under Windows...I'm using my own email API..)
David

David can you share how you managed to get the inline images to work. I've got the general idea of how to do it. But I do not seem to be able to change the Content-Type to multipart/mix. Can you point me in the right direction. Should the Content-Type definition and everything else be part of the body? Or should some headers (namely the multipart) be defined in the mailto URL format?
In other words do you do: mailto:?subject=test&Content-Type=multipart/mix;%20boundary=myBoundary&body=--m yBoundary etc...
Or id it: mailto:?subject=test&body=Content-Type=multipart/mix;%20boundary=myBoundary%20- -myBoundary etc..
Neither seems to work for me so I am really stuck. But knowing what the right way is would help me figure things out a bit better.
Thanks in advance

How to work with both desktop and Surface pro 3

Similar Messages

Maybe you are looking for