How to work with Canon EOS 6D log file in Lightroom

After searching all over the place I found an easy solution for working with the log file from the Canon 6D.
This file is in .log format and can not be imported in Lightroom directly, because LR works with the .gpx format.
First place the file out of the camera memory to the SD card as told in the manual.
Copy the .log file to your computer.
Go to GPS Visualizer.
On the start screen there is a green box.
You can choose the .gpx output format there.
Browse for your .log file.
Give command to convert and after a short while you can download the converted .gpx file.
This one you can import in Maps in LR (with that snake like symbol down the mainscreen).
This worked perfect for me and I would like to share this information, because both Canon and Adobe couldn't help me and pointed to each other.
Good luck!
Frans

You should never use relative paths to access the filesystem. The path would be relative to the current working directory which is not per se the same in all environments. To convert a relative web path to an absolute file system path, you need ServletContext#getRealPath(). Use this absolute file system path in the java.io stuff. In a JSF application on top of Servlet API you can get the underlying ServletContext by ExternalContext#getContext().
Alternatively, if the file is located in one of the default paths of the classpath or if its path is added to the classpath, you can also just use ExternalContext#getResource() or even #getResourceAsStream() using just the file name.

Similar Messages

Mac will not work with Canon EOS cameras

My imac OS X 10.6 is not working well with my Canon EOS 5d Mark II camera on the tethered mode. The camera works well with other Mac computers, and I have spent hours with Canon tech help. It now seems that the issue may be with the computer. The EOS Utility is working, everything has been updated, all Canon checkpoints look good, but when I use the camera, the image does not transfer. And then everything gets locked into a loop and I have to crash the camera and force quit the program. Is there something in the computer that may be blocking the transfers? any ideas where to look? Canon has done everything on the camera side, but I don't know where to begin with the computer.

OH, ok. So the issue is with transferring the image from the camera to the computer. Since you said you have done everything possible with canon, the camera's firmware is completely up to date, you have the correct software installed. Since you say no cameras work with this computer I am inclined to say the problem is from the computer, which is why the problem exists. I'd do an apple hardware test and see if anything turns up. Clean install of the canon software would also be a good idea.

Will elements 13 raw converter work with Canon 7D MK2 raw files

My friend is about to purchase the new Canon 7D Mk2 DSLR camera. He currently only takes images in jpg format and edits images with the Canon software provided with his current Canon camera. I have encouraged him to purchase Elements 13 and to start taking images in raw and using the raw converter. Will the raw converter in elements 13 be compatible with the raw files of the new Canon 7D MK2, please?
The Canon 7D MK2 is a new model and I realise that Adobe may not yet have prepared a raw converter to work with images from this camera. However it may be that the raw converter for the new camera is the same as that used in camera it replaces. Does anyone know please?
Regards Dave S.

The 7d mkii is not yet supported but should be in the next camera raw update. It’s not yet featured on the ACR8.7 list of new cameras, but this is only release candidate software. The 7d mkii could easily feature in the final version. Keep an eye on Adobe Labs for further updates.
http://labs.adobe.com/downloads/cameraraw8-7.html

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

You could try using the DNG converter 8.7 on Windows vista:
<Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
<Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
You then need to watch this video to get hang of it:
<Camera Raw: How to use Adobe DNG Converter - YouTube>
Hope this helps.

How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

In what way is ACR not working in Bridge? Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue?
Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

Is canon EF 24-85mm F3.5-4.5 lens compatible with canon eos 6D ? is it work fully automatic ?

Is canon EF 24-85mm F3.5-4.5 lens compatible with canon eos 6D ? is it work fully automatic ?

6D requires lenses with an EF mount. You list your lens as an EF (the mount style) 24-85 zoom so yes it will work but it may not provide nice crisp images on such a modern high mpixel camera. The newer bodies show the weaknesses of older consumer grade lenses.
"A skill is developed through constant practice with a passion to improve, not bought."

Working with Canon 5D standard definition video

I'm facing an odd situation.
Just started editing a documentary shot with a Canon 5D camera. The picture looks great. The only thing is, the cameraman decided that this is a video and he didn't need to shoot HD! I don't know why he thought that, since the main reason people use the Canon 5D is to get a full HD frame. Anyhow, I've been presented now with hours of brilliant interviews that can't be redone, all with a frame size of 640x480 running at 25 frames per second. I need to figure out how to edit these and create a broadcast master at the end. 25fps is not the issue, it's the frame size and video compression that I need to deal with.
The Canon 5D generates Quicktime files with an H.264/Mpeg4 compression. I need to convert these files to a format better suited to editing and mastering for broadcast. An HD master is, of course, impossible, but 640x480 is even smaller than the standard 720x576 frame size that one gets on regular standard definition PAL video.
I found a transcoding plugin for the Canon 5D, but it only works with files shot in the HD format, which get converted to Apple ProRes in the FCP's 'log and transfer' window. I've been unable to find any instructions on how to work with standard definition files.
I imported the native H.264 files into the FCP, and found, of course, that I can play the video quite smoothly as it is. There's even a timeline setting that allows me to edit without rendering. But I'm afraid that if I work with the native files, I won't be able to master them to tape at the end.
Any pointers on how best to go about this would be most useful!

Try using Compressor to convert to the standard PAL frame size using DV50. Good luck and whip the cameraperson.

I can't use my iPad2 with CANON EOS 350D

I can't use my iPad2 with CANON EOS 350D

Hi! You seem to be good at this. today I purchased the Camera Connection Kit but it doesn't work with my old Canon EOS 350d. I've switched to 'PTP' but it doesn't work. When I go in to "pictures" and "Camera" I can't see any pictures. Do you have any idea why? Can it have somehing to do with that I don't have the newest IOS 5? ( I have iPad 2nd gen). Don't know if you need to know anything more, but I would really appreciate if you could try to help me!

Is canon EF 24-85mm F3.5-4.5 lens is compatible with canon eos 6D ?

Is canon EF 24-85mm F3.5-4.5 lens is compatible with canon eos 6D ? is it work fully automatic ?

pjmacd wrote:
Yes, that lens will work normally on the EOS 6D with all automatic functions intact. Any Canon lens labeled as "EF" will work on the 6D, but lenses labeled "EF-S" will have strong vignetting (darkening in the corners of the shot).
Actually... "EF-S" lenses will not even mount. There's a lip on full-frame bodies designed to prevent EF-S lenses from being attached. It's not just a question of heavy vignetting and severely degraded image quality at the edges of the frame -- there's a risk of the reflex mirror hitting the rear-most element on an EF-S lens (remember... full frame cameras require physically larger reflex mirrors).
Any "EF" lens can be used. Any "EF-S" lens must not be used (and will not fit). Also, there are a few special purpose lenses such as the MP-E and TS-E lenses which will work with the 6D as well.
Tim Campbell
5D II, 5D III, 60Da

How to work with DTR and CBS?

Hi
I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
If possible can any one send me the screen shots how to work with these ?
Best Regards
Ravi Shankar B

Hi Ravi
For you to work with DTR and CBS, firstly u will have to configure JDI on server.
To configure the NWDI, please go through the links given below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
In Nutshell, following steps will be performed:
1) logon to Portal Devinf.
2) click on CMS
3) Go to landscape configurator
4) create domain
5) create tracks and add Software components in that track
6) runtime systems ( dev/qa etc are configured
7) in the transport studio, all the files listed are checked in through check - in tab.
8) they move to developement tab.
Once all these things are done, in your NWDS:
1) Setting the devbox host name and server port in Window -> Preferences -> SAP
J2EE Engine
2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
to check whether server is getting accessed from NWDS.
3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
4) In the DC perspective, in the Local DCs view, perform import configuration.
5) the dev track is not configured
6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
Thanks & regards,
Anupreet

How to work with 360 video?

I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
Thank you,
Phil

Phil,
Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
Drop your movie into a composition and apply CC Sphere to the video.
Then set the Render option in the effect to "Inside".
Under Shading set Ambient to 100% and Diffuse to 0%.
Then scale inside the effect until the image fills the screen.
Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
Let me know if you have any questions!
Trent

How to work with EEWB tool in CRM and how to assign it to PCUI

Hi Friends,
Can any body will suggest me how to work with EEWB tool in CRM to add new fields ,i need to attach the fields to a GUI screen and same to PCUI also,
And how to attach a search help for those fields,is the tool will automatically will create the search helps or it is similar as we do in abap,
So can any body suggest me to get a material on this ,
Thaking you
Regards
Raghavendra Prasad

Prasad
Following are the steps involved in general :
1. Select the filter Worklist and enter your name in the input field of the object list selection. Press the enter key. Your object list is displayed.
2. Place your cursor on the highest node(PROJECT BY XXXXXX). Select Create project from the context menu by right-clicking on it. You see the dialog box Create project.
3. Enter a project name, description, packages, and namespaces for each system used. Leave the dialog box by pressing the enter key.
Specify transport requests. The Project is created and appears in the object list.
4. Place your cursor on the new project in the object list and select Create extension in the context menu. You see the dialog box Create extension.
5. Enter a name and description. Define a Business Object and extension type. Press the enter key.The extension is created and appears in the object list below the project.
6. Place your cursor on the new extension in the object list and select Call wizard in the context menu. The wizard for the extension action starts automatically.
7. Fill in the input fields following the notes on screen and end the wizard by clicking on Complete.The extension tasks have been created and appear in the object list.
Project and extension are created !
Also take care that you have the Transport Requests and Save the Project and Extensions against a Development Class !
In general , EEW will automatically puts the fields on the Screen. We donot want to worry abt that !
The generated BADIs can be implemented to do some Checks(for example) !
I hope this helps !
Thanks
<b>Allot points if this helps !</b>

Macbook pro is not working with Canon pixma iP1500, but has previously. The printer works with an old PC without trouble. "printer is offline" message when this printer is plugged into macbook. Any clues to get it to work?

Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?

Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How OEM works with database

Hi,
We use OEM (12c),have db (11.2,10.2/1).
How OEM works with database?
When oem initated a job aginst db,What are the steps preformed by OEM?What are the info updated in OEM DB and Normal DB regading jobs?And Where?
Br

At what point do you get this message?
Have a look at the Windows Service. Ensure the EM Agent is running. Your database and Listener may be running, but if the Agent is not running, you will not be able to see correct status.
Stop and start the Agent

Can't get my iphone4 AirPrint to work with Canon mx712 printer

Can't get my iphone4 AirPrint to work with canon mx712 printer
I've reviewed all network, printer, phone settings

airprint basic http://support.apple.com/kb/ht4356 see if that printer is compatible.
airprint troubleshooting http://www.apple.com/support/iphone/assistant/airprint/
If it is not compatible then you will need to look at the appstore to find something compatible to be able to print.

How to work with Canon EOS 6D log file in Lightroom

Similar Messages

Maybe you are looking for