How to work with Group Administration
I am working as a System Administration.
I have knowledge in Windows based environment.
I am newly got a job, where I have to maintain MAC based servers.
I don't have knowledge about USER and GROUP Administration.
Please help me out about this thoroughly and in a simple manner.
Hi
Start by reading this:
http://manuals.info.apple.com/en_US/Mac_OSX_Server_v10.6_Getting_Started.pdf
Progress onto this:
http://manuals.info.apple.com/en_US/UserMgmt_v10.6.pdf
The rest of the Manuals are here:
http://support.apple.com/manuals/#serversandenterprisesoftware
In case you were not aware these Forums are User to User only. No-one from Apple is obliged or likely to respond directly to your question(s).
I would also advise you to enrol in an Approved Apple Server Training Course if that's a possibility in your area? You should also consider using Google.
HTH?
Tony
Similar Messages
-
How to work with 360 video?
I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
Thank you,
PhilPhil,
Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
Drop your movie into a composition and apply CC Sphere to the video.
Then set the Render option in the effect to "Inside".
Under Shading set Ambient to 100% and Diffuse to 0%.
Then scale inside the effect until the image fills the screen.
Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
Let me know if you have any questions!
Trent -
Error in communicating with Group Administration Server
Hello everyone, i am requesting your help for an issue with LMS 4.2.5
When i browse to Admin-> Group Management -> Fault.
I get the following:
OGS Server Error
Error
Error in communicating with Group Administration Server.
It may be down or not yet up. Please make sure that the Group Administration Server is up and running, then refresh the page.
here is the pdshow output
pdshow
Process= ESS
State = Program started - No mgt msgs received
Pid = 5536
RC = 0
Signo = 0
Start = 10/31/14 14:13:21
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EssMonitor
State = Running normally
Pid = 5567
RC = 0
Signo = 0
Start = 10/31/14 14:13:25
Stop = Not applicable
Core = Not applicable
Info = ESS is fully up now !
Process= EventFramework
State = Program started - No mgt msgs received
Pid = 5584
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= SyslogCollector
State = Running normally
Pid = 5585
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = SyslogCollector Started at Fri Oct 31 14:13:28 CST 2014
Process= RMEDbEngine
State = Program started - No mgt msgs received
Pid = 5586
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHDbEngine
State = Program started - No mgt msgs received
Pid = 5663
RC = 0
Signo = 0
Start = 10/31/14 14:13:30
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMDbEngine
State = Program started - No mgt msgs received
Pid = 5696
RC = 0
Signo = 0
Start = 10/31/14 14:13:34
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMServer
State = Running normally
Pid = 5729
RC = 0
Signo = 0
Start = 10/31/14 14:13:38
Stop = Not applicable
Core = Not applicable
Info = EPMServer is up and running
Process= AdapterServer
State = Program started - No mgt msgs received
Pid = 5748
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= AdapterServer1
State = Program started - No mgt msgs received
Pid = 5749
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHServer
State = Running normally
Pid = 5750
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = FHServer started.
Process= INVDbEngine
State = Program started - No mgt msgs received
Pid = 5751
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= PMServer
State = Running normally
Pid = 5936
RC = 0
Signo = 0
Start = 10/31/14 14:13:46
Stop = Not applicable
Core = Not applicable
Info = PMServer is up and running
Process= IpmDbEngine
State = Program started - No mgt msgs received
Pid = 5960
RC = 0
Signo = 0
Start = 10/31/14 14:13:50
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbEngine
State = Program started - No mgt msgs received
Pid = 5993
RC = 0
Signo = 0
Start = 10/31/14 14:13:54
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbMonitor
State = Running normally
Pid = 6026
RC = 0
Signo = 0
Start = 10/31/14 14:13:58
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= ANIDbEngine
State = Program started - No mgt msgs received
Pid = 6027
RC = 0
Signo = 0
Start = 10/31/14 14:13:59
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= MACUHIC
State = Running normally
Pid = 6055
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= UTLITE
State = Running normally
Pid = 6056
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= FDRewinder
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= CmfDbEngine
State = Program started - No mgt msgs received
Pid = 6057
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CmfDbMonitor
State = Running normally
Pid = 6183
RC = 0
Signo = 0
Start = 10/31/14 14:14:08
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= DfmBroker
State = Running normally
Pid = 6190
RC = 0
Signo = 0
Start = 10/31/14 14:14:09
Stop = Not applicable
Core = Not applicable
Info = DfmBroker is running normally
Process= DfmServer
State = Running normally
Pid = 6322
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer initialized OK.
Process= DfmServer1
State = Running normally
Pid = 6323
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer1 initialized OK.
Process= DFMLogServer
State = Program started - No mgt msgs received
Pid = 6324
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMCTMStartup
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 11:55:05
Stop = 11/03/14 11:55:05
Core = Not applicable
Info = Application started by administrator request.
Process= FHPurgeTask
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 00:00:00
Stop = 11/03/14 00:00:44
Core = Not applicable
Info = DPS Task FHPurgeTask completed at Mon Nov 03 00:00:44 CST 2014. For status check Job Browser UI.
Process= DFMMultiProcLogger
State = Program started - No mgt msgs received
Pid = 6327
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CSDiscovery
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= DCRDevicePoll
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 09:15:02
Stop = 11/03/14 09:15:50
Core = Not applicable
Info = Application started by administrator request.
Process= CSRegistryServer
State = Running normally
Pid = 6328
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = CSRegistryServer is running
Process= Tomcat
State = Program started - No mgt msgs received
Pid = 6330
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TomcatMonitor
State = Running normally
Pid = 6670
RC = 0
Signo = 0
Start = 10/31/14 14:14:17
Stop = Not applicable
Core = Not applicable
Info = Tomcat Server up
Process= Apache
State = Running normally
Pid = 7183
RC = 0
Signo = 0
Start = 10/31/14 14:16:02
Stop = Not applicable
Core = Not applicable
Info = Web Server initialized ok.
Process= DCRServer
State = Running normally
Pid = 7204
RC = 0
Signo = 0
Start = 10/31/14 14:16:06
Stop = Not applicable
Core = Not applicable
Info = DCRServer is up and running
Process= CMFOGSServer
State = Program started - No mgt msgs received
Pid = 7257
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TISServer
State = Program started - No mgt msgs received
Pid = 7258
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMOGSServer
State = Program started - No mgt msgs received
Pid = 7323
RC = 0
Signo = 0
Start = 10/31/14 14:16:16
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NOSServer
State = Running normally
Pid = 7375
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = NOSServer is up and running
Process= PTMServer
State = Running normally
Pid = 7376
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = Started Successfully
Process= InventoryCollector
State = Running normally
Pid = 7377
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = InventoryCollector is up and running
Process= Interactor
State = Program started - No mgt msgs received
Pid = 7496
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= InventoryCollector1
State = Program started - No mgt msgs received
Pid = 7497
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= Interactor1
State = Program started - No mgt msgs received
Pid = 7589
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMProcess
State = Running normally
Pid = 7590
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = UPMProcess started successfully.
Process= UTManager
State = Running normally
Pid = 7591
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= EssentialsDM
State = Running normally
Pid = 7592
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = RME Device Management started.
Process= ICServer
State = Running normally
Pid = 7730
RC = 0
Signo = 0
Start = 10/31/14 14:16:31
Stop = Not applicable
Core = Not applicable
Info = ICServer started.
Process= EnergyWise
State = Running normally
Pid = 7923
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = EnergyWise Process is running normally Fri Oct 31 14:16:45 CST 2014
Process= PMCOGSServer
State = Program started - No mgt msgs received
Pid = 7924
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= ConfigMgmtServer
State = Running normally
Pid = 7925
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = DCMA is running normally Fri Oct 31 14:17:02 CST 2014
Process= ConfigUtilityService
State = Running normally
Pid = 7926
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = ConfigUtilityService started.
Process= CAAMServer
State = Running normally
Pid = 7927
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = CAAMServer started.
Process= VNMServer
State = Program started - No mgt msgs received
Pid = 7928
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= WlseUHIC
State = Running normally
Pid = 7929
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= IPMOGSServer
State = Program started - No mgt msgs received
Pid = 7940
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TopoServer
State = Program started - No mgt msgs received
Pid = 7941
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= LicenseServer
State = Program started - No mgt msgs received
Pid = 7942
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServer
State = Program started - No mgt msgs received
Pid = 7946
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServiceMonitor
State = Program started - No mgt msgs received
Pid = 8205
RC = 0
Signo = 0
Start = 10/31/14 14:16:39
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EDS
State = Running normally
Pid = 8290
RC = 0
Signo = 0
Start = 10/31/14 14:16:43
Stop = Not applicable
Core = Not applicable
Info = Initialization complete
Process= ANIServer
State = Running with busy flag set
Pid = 8768
RC = 0
Signo = 0
Start = 10/31/14 14:17:14
Stop = Not applicable
Core = Not applicable
Info = ANIServer started.
Process= UTMajorAcquisition
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 10:00:00
Stop = 11/03/14 10:14:13
Core = Not applicable
Info = Application started by administrator request.
Process= EDS-GCF
State = Running normally
Pid = 8807
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = GCF Initialization complete at Fri Oct 31 14:17:53 CST 2014
Process= jrm
State = Running normally
Pid = 8808
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DataPurge
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = 10/31/14 14:19:11
Core = Not applicable
Info = DataPurge initialization completed at Fri Oct 31 14:19:11 CST 2014.
Process= IPMProcess
State = Program started - No mgt msgs received
Pid = 9155
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CTMJrmServer
State = Running normally
Pid = 9156
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = CTMJrmServer started.
Process= SyslogAnalyzer
State = Running normally
Pid = 9246
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = SyslogAnalyzerService Started at Fri Oct 31 14:18:35 CST 2014
Process= ChangeAudit
State = Program started - No mgt msgs received
Pid = 9247
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1014
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1965
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1964
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 2360
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3056
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3104
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1001
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3177
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3206
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1015
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1524
State = Program started - No mgt msgs received
Pid = 21804
RC = 0
Signo = 0
Start = 11/02/14 19:00:00
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 3306
State = Program started - No mgt msgs received
Pid = 17433
RC = 0
Signo = 0
Start = 11/03/14 11:37:17
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1005
State = Running normally
Pid = 19289
RC = 0
Signo = 0
Start = 11/03/14 12:00:00
Stop = Not applicable
Core = Not applicable
Info = 1005 started.
Process= diskWatcher
State = Program started - No mgt msgs received
Pid = 9249
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Thanks in advance for your help.
Best regards.Also when i click the alarms bar that is sitting in the bottom right i got these in DFMOGSServer.log
[ Thu Nov 06 15:25:37 CST 2014 ] ERROR com.cisco.nm.xms.ogs.kilner10.KilnerEventConsolidator makeEvent - MAKE CONSOLIDATED_DFMOGS_EVENT: 9 data:
[ Thu Nov 06 15:25:46 CST 2014 ] FATAL com.cisco.nm.xms.ogs.server.OGSServer main - Exception while OGS Server start up: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
com.cisco.nm.xms.ogs.util.OGSException: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
at com.cisco.nm.xms.ogs.server.OGSImpl.publishURN(OGSImpl.java:1396)
at com.cisco.nm.xms.ogs.server.OGSServer.main(OGSServer.java:73)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unreachable Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 9 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unmanaged Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Suspended Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 0 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
Don´t know much about databases, but it seems im missing some important tables or data -
How to work with EEWB tool in CRM and how to assign it to PCUI
Hi Friends,
Can any body will suggest me how to work with EEWB tool in CRM to add new fields ,i need to attach the fields to a GUI screen and same to PCUI also,
And how to attach a search help for those fields,is the tool will automatically will create the search helps or it is similar as we do in abap,
So can any body suggest me to get a material on this ,
Thaking you
Regards
Raghavendra PrasadPrasad
Following are the steps involved in general :
1. Select the filter Worklist and enter your name in the input field of the object list selection. Press the enter key. Your object list is displayed.
2. Place your cursor on the highest node(PROJECT BY XXXXXX). Select Create project from the context menu by right-clicking on it. You see the dialog box Create project.
3. Enter a project name, description, packages, and namespaces for each system used. Leave the dialog box by pressing the enter key.
Specify transport requests. The Project is created and appears in the object list.
4. Place your cursor on the new project in the object list and select Create extension in the context menu. You see the dialog box Create extension.
5. Enter a name and description. Define a Business Object and extension type. Press the enter key.The extension is created and appears in the object list below the project.
6. Place your cursor on the new extension in the object list and select Call wizard in the context menu. The wizard for the extension action starts automatically.
7. Fill in the input fields following the notes on screen and end the wizard by clicking on Complete.The extension tasks have been created and appear in the object list.
Project and extension are created !
Also take care that you have the Transport Requests and Save the Project and Extensions against a Development Class !
In general , EEW will automatically puts the fields on the Screen. We donot want to worry abt that !
The generated BADIs can be implemented to do some Checks(for example) !
I hope this helps !
Thanks
<b>Allot points if this helps !</b> -
Hi,
We use OEM (12c),have db (11.2,10.2/1).
How OEM works with database?
When oem initated a job aginst db,What are the steps preformed by OEM?What are the info updated in OEM DB and Normal DB regading jobs?And Where?
BrAt what point do you get this message?
Have a look at the Windows Service. Ensure the EM Agent is running. Your database and Listener may be running, but if the Agent is not running, you will not be able to see correct status.
Stop and start the Agent -
Can any one tell me how to work with field exit????
Hi
Can any one tell me how to work with field exit I know how to create them. I want to know how it works. Actually I want to create a field exit for T-CODE MIRO. Where I want to put the value ebeln of the PO Reference tab into the Assignment of details tab and make Assignment field disable.
Thanks in advanceHi,
Follow the Steps,
1. Go to CMOD transaction
2. From the menu "GOTO->TEXT ENHANCEMENTS->DATA ELEMENTS- ->NEW DE CUST DOCU".
3. In the displayed box specify the data element and
press either "CHANGE" or " Ref to screen" button
4. CHANGE button is for defining the documentation
5. "Ref. to screen" if for assigning the screen in which
a field has the this type data element.
Note: You should have used this data element for a
field in that screen.
6. Now it will ask for Function Module name, specify the
FM name and double click it. It will go to the editor.
7. Now using the Import parameters code accordingly
8. Activate and go back
9. Now "Assign the created program ( that is FM) to the
screen by specifying the Program name and Screen
number.
10. Now save and activate.
Note: No need to create a separate project for creating field exit through transaction CMOD.
I hope this is suffice.
Regs,
Venkat Ramanan -
How to Work with Composite Primary Key
Hi All,
I'm working with Toplink JPA. Here I have A problem with inserting into database table which have composite Primary Key.
What I'm doing is, I have two tables. to maintain many to many relation between these two tables I created another intermediate table which consists of foreign Keys (reference) of above two tables.
Now these two foreign Keys in the Intermediate table made as composite Primary Keys.
When I'm trying to the data in the Intermediate table I'm getting the foreign Keys values are null..
could anyone suggest me how to work with composite Primary Keys
Thanks,
SatishI have the same problem, I have 3 tables with a join table joining them all. I have created an intermediate table entity. When I go to create a an entry, it says that I cannot enter null into "ID". Here is the SQl toplink generates:
INSERT INTO Z_AUTH_USER_AUTHORIZATION (CONTEXT_ID, AUTHORIZATION_ID, USER_ID) VALUES (?, ?, ?)
bind => [null, null, null]
Here are the classes:
-----------------------Join Table-----------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER_AUTHORIZATION")
public class AuthUserAuthorization implements Serializable{
@EmbeddedId
private AuthUserAuthorizationPK compId;
// bi-directional many-to-one association to AuthAuthorization
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "AUTHORIZATION_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthAuthorization authAuthorization;
// bi-directional many-to-one association to AuthContext
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "CONTEXT_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthContext authContext;
// bi-directional many-to-one association to AuthUser
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "USER_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthUser authUser;
---------------------------------------User table--------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER")
public class AuthUser implements Serializable, IUser{
@Id()
@SequenceGenerator(name = "AUTH_USER_ID_SEQ", sequenceName = "Z_AUTH_USER_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_USER_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 10)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authUser", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
-----------------------------------Context table-----------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_CONTEXT")
public class AuthContext implements Serializable, IContext{
@Id()
@SequenceGenerator(name = "AUTH_CONTEXT_ID_SEQ", sequenceName = "Z_AUTH_CONTEXT_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_CONTEXT_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authContext", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
----------------------------Authorization table-------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_AUTHORIZATION")
public class AuthAuthorization implements Serializable, IAuthorization{
@Id()
@SequenceGenerator(name = "AUTH_AUTHORIZATION_ID_SEQ", sequenceName = "Z_AUTH_AUTHORIZATION_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_AUTHORIZATION_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authAuthorization", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
I have tried to create the new entity several ways. I have tried to create one with the default constructor then set this entity on each of the other entities, I have also tried to pass in the entities to the join entity and set them there, but this doesn't work. Any help would be very appreciated!
Thanks,
Bill -
Hi, help me on how to work with datasets
hi,
this is bsv. can any one help me on how to work with datasets.
regards...
srinivasHi,
Use this update statement.
Update
nv2_audit_log
Set
qualifier = replace(qualifier,'NXPRI','NXUPM')
Where
qualifier like '%NXPRI%NXUPM%';
Hope this helps!
Regards,
Rajesh. -
Can u explain me how to work with OOPs ABAP
Hi,
Can u explain me how to work with OOPS Abap, If possible pls send me some sample programs regarding OOps concept used in Realtime.
Thanks.hii,
Please check this online document (starting page 1291).
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Also check this links as well.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.futureobjects.de/content/intro_oo_e.html
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
What is Object Orientation?
Object orientation (OO), or to be more precise, object-oriented programming, is a problem-solving method in which the software solution reflects objects in the real world.
A comprehensive introduction to object orientation as a whole would go far beyond the limits of this introduction to ABAP Objects. This documentation introduces a selection of terms that are used universally in object orientation and also occur in ABAP Objects. In subsequent sections, it goes on to discuss in more detail how these terms are used in ABAP Objects. The end of this section contains a list of further reading, with a selection of titles about object orientation.
Objects
An object is a section of source code that contains data and provides services. The data forms the attributes of the object. The services are known as methods (also known as operations or functions). Typically, methods operate on private data (the attributes, or state of the object), which is only visible to the methods of the object. Thus the attributes of an object cannot be changed directly by the user, but only by the methods of the object. This guarantees the internal consistency of the object.
Classes
Classes describe objects. From a technical point of view, objects are runtime instances of a class. In theory, you can create any number of objects based on a single class. Each instance (object) of a class has a unique identity and its own set of values for its attributes.
Object References
In a program, you identify and address objects using unique object references. Object references allow you to access the attributes and methods of an object.
In object-oriented programming, objects usually have the following properties:
Encapsulation
Objects restrict the visibility of their resources (attributes and methods) to other users. Every object has an interface, which determines how other objects can interact with it. The implementation of the object is encapsulated, that is, invisible outside the object itself.
Polymorphism
Identical (identically-named) methods behave differently in different classes. Object-oriented programming contains constructions called interfaces. They enable you to address methods with the same name in different objects. Although the form of address is always the same, the implementation of the method is specific to a particular class.
Inheritance
You can use an existing class to derive a new class. Derived classes inherit the data and methods of the superclass. However, they can overwrite existing methods, and also add new ones.
Uses of Object Orientation
Below are some of the advantages of object-oriented programming:
Complex software systems become easier to understand, since object-oriented structuring provides a closer representation of reality than other programming techniques.
In a well-designed object-oriented system, it should be possible to implement changes at class level, without having to make alterations at other points in the system. This reduces the overall amount of maintenance required.
Through polymorphism and inheritance, object-oriented programming allows you to reuse individual components.
In an object-oriented system, the amount of work involved in revising and maintaining the system is reduced, since many problems can be detected and corrected in the design phase.
Achieving these goals requires:
Object-oriented programming languages
Object-oriented programming techniques do not necessarily depend on object-oriented programming languages. However, the efficiency of object-oriented programming depends directly on how object-oriented language techniques are implemented in the system kernel.
Object-oriented tools
Object-oriented tools allow you to create object-oriented programs in object-oriented languages. They allow you to model and store development objects and the relationships between them.
Object-oriented modeling
The object-orientation modeling of a software system is the most important, most time-consuming, and most difficult requirement for attaining the above goals. Object-oriented design involves more than just object-oriented programming, and provides logical advantages that are independent of the actual implementation
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For basic stuff......
abap oops
http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
ABAP Business Development and Service Provisioning/ABAP Objects
General information
What is Object Orientation?
some blogs
A small tip for the beginners in OO ABAP
Object Oriented ABAP (OO-ABAP)
and others wiki OO Abap
cheers,
sharad
Edited by: sharad narayan on Apr 29, 2008 12:19 PM -
Hi,
I want to create a small program in Xcode which create a excel speedsheet with fiew sheet and put data into sheet using
VisualBasicforApplication.framework.
What can i do, so that i can create/write excel files in xcode on Mac OS X?
Please help me as soon as possible.
ThanksOriginally Posted by skoltogyan
How to work with database in the Teaming ?
I need create some web-forms and store it in the database on the server.
Any example - how i can do this with Teaming ?
Please, Help me.
Serg
Hi Serg,
Not sure what you are looking for and I'm also no dev...
Maybe this link will help : Episode X: Teaming Templates | Novell User Communities -
How Ajax works with Struts framework
How Ajax works with Struts framework .
Thanks
RamkiSo we must write file name(like abc.do), If am using struts <html:link > tag like <html:like action="abc" >Click</html:link>, so with ajax we must call like <a href ="abc.do">Click</a> .
But there is a problem, if am using ,
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>/r/*</url-pattern>
</servlet-mapping>
or
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
here i am changing web.xml file based on client interest. At those situation we must change all jsp pages for <a href ="/r/abc">Click</a> .like,.
It's very difficult.
Is any other way to use ajax with Struts (Only struts tags)
Thanks
Ramki -
How to work with DTR and CBS?
Hi
I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
If possible can any one send me the screen shots how to work with these ?
Best Regards
Ravi Shankar BHi Ravi
For you to work with DTR and CBS, firstly u will have to configure JDI on server.
To configure the NWDI, please go through the links given below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
In Nutshell, following steps will be performed:
1) logon to Portal Devinf.
2) click on CMS
3) Go to landscape configurator
4) create domain
5) create tracks and add Software components in that track
6) runtime systems ( dev/qa etc are configured
7) in the transport studio, all the files listed are checked in through check - in tab.
8) they move to developement tab.
Once all these things are done, in your NWDS:
1) Setting the devbox host name and server port in Window -> Preferences -> SAP
J2EE Engine
2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
to check whether server is getting accessed from NWDS.
3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
4) In the DC perspective, in the Local DCs view, perform import configuration.
5) the dev track is not configured
6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
Thanks & regards,
Anupreet -
How to work with the Migration tool in SAP BPC from MS to NW
Hi,
I am working in a Migration project from SAP BPC MS to NW.
we are having a migration tool purchaged from SAP.
I don't know how to work with,Could you please help me in this.
Is there any way to do it by Manually?
Thanks and Regards
KrishnaHi Krishna,
As you are not upgrading your version but you are migrating from one BPC platform to the other, you need to follow all the rules of installing fresh SAP BPC version. As you have not specified from which version you are migrating and to which version, you can refer to the following link for installations and upgrades (You need to login using your S-user ID):
https://websmp203.sap-ag.de/support
Hope this helps.
Rgds,
Poonam -
I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you
"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/ -
Question on how networking works with new Macbook Pro
Hi,
I have a question about how networking works with my new Macbook Pro. This is my first laptop so am new to mobile computing. I am about to configure it to replace my desktop which uses a wired DSL connection. Once I have my Macbook Pro configured to run off the DSL modem, what happens when I take this computer to a location that has ethernet? Will just plugging in the ethernet cable be enough to get on line? Or is there further configuration work that needs to be done?
I used a Windows laptop from work and all I had to do was plug it in to a hotel ethernet cable to get on line. However, this laptop was never configured to run on my DSL network so I am not certain if that makes things more complicated.
Thanks for your help!Hi
Your MacBook Pro should just work when plugged into an ethernet connection.
Just check something, Open Network Preferences, you can select it from the Airport icon in the menu bar.
In the left-hand pane click on Ethernet and just check that it is set to configure using DHCP in the right-hand pane, that's it.
So when you plug in the ethernet cable it will ask the router for an IP address and off you go.
I assume that any system you plug into will use DHCP rather than static IP addresses. If it is a static IP address, you will need to manually configure the ethernet settings by inputting the IP address and subnet mask info plus DNS servers.
Usually it is done with DHCP and you don't have to do a thing and likewise your home DSL is DHCP?
If not then you will have to change your settings, make a 'Hotel' setting which you can use when in hotels and keep your 'Home' set-up for when you are at home. In the pull down menu select Edit Locations to add new ones.
Phil
Message was edited by: Philip Tyler
Maybe you are looking for
-
Can Someone please help me out????
Ive recently been having problems with my iPod after it froze on me mid song...I reset it using the guidelines... unfortunately it wiped the whole thing-so now ive nothing on there at all (its gone back to how it was when i bought it!!) Since it eras
-
Hi surfers, Flash Actionscript 3.0. How to save Movieclip to pdf Format with high resolution. Help for me Thanks in Advance.
-
need help
-
Do I need to be on the internet to access movies in my iTunes library? And would these same movies in my library play in Rio, Brazil. Most videos will not stream from US to Brazil...... such as no Hulu, video clips or song samples will not play in B
-
Error Message Too Many Associations on Mesh Node
I've been have trouble connecting one of my 1500 AP to my WLC4402. It was connected during testing to its root point but after installation it is giving the error Too Many Associations on Mesh Node in the Trap log and it cycles about every 10 minutes