How to work with master detail?
Dear i created sequnce for both master and detail.
i m giving example below
i have deptid,dept name (master table) but deptname is mandatory , in detail table i have empid,empname
but when i click on create insert of master table and witout inserting any data in dept name(master table ) ,if click on create insert button of detail table it is showing error
deptname is mandatory.
but i want after inserting data in detail table when i will click on commit it should show that error.
Seems like you are trying to insert a detail that doesn't have a master - that won't work if you are using the view object that appears under the master view.
It should work fine if you are using the stand-alone view object.
Read more here:
http://docs.oracle.com/cd/E16162_01/web.1112/e16182/bcentities.htm#CEGJAFCF
Similar Messages
-
How to build a screen with master detail data
Hi ,expert ,
Someone can teach me how to build a screen with master detail table ?
I wnat to build a screen for user to maintain FERT group and FERT detail list in one screen .
just like this ..
MASTER Block
FERT1
FERT2
FERT3
DETAIL Block
FERT1A1
FERT1A2
FERT1A3
when I double click FERT1 in the Master Block the detail view will show FERT1A1 A2 A3
Thanks for your help ....
Moderator message : Not enough research before posting. Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 1:38 PMAn inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG 4 KB
Better Build Array.PNG 6 KB -
Populate PK(DBSequence) in three related tables with master detail association
Hi
I use jdeveloper 11.1.1.6.0.
My English isn't very good.
I have 3 tables with master detail association between them and primary key from table A should populate to tables B and finally C .The primary key is a sequence from data base and I set PK attribute in table A as a DBSequence. (table C is the child of table B and table B is the child of table A)
My association is like this: A->B(BAFk1Assoc) and B ->C(CBFk1Assoc) and also I select Composition Association for these two association. And I select ‘Cascade Update Key Attribute’
When I insert row in these three related tables, a negative number create but when I COMMIT the PK populate only to table B not to table C and the exception below raises:
Constraint "C_B_FK1" is violated during post operation "Insert"
ORA-02291: integrity constraint (HR.C_B_FK1) violated - parent key not found.
If I only work with tables A and B, there isn't any problem but if I add table C as the child of B, this exception raises.
HabibThe question is how you create the row for table C. Do you create it as child from table b (using the VO for B and using the link to C)?
In this case the framework should populate the PK of the master row B as FK in table C.
You may need to control the order in which the rows are posted to the DB to avoid this problem. Read Advanced Entity Object Techniques - 11g Release 1 (11.1.1.6.0) to get more info about this.
However, sometimes it's easier to control the generation and setting if the PK attributes in the model layer, not relating on db triggers where you get the real values only after the commit operation is done in the db. For this you can use a Groovy expression so you have access to the PK of each new created row right after creation. Read Using Groovy Expression to set a Primary Key with a Sequence Number | JDev & ADF Goodies to find out how to do this.
Timo -
Can any one tell me how to work with field exit????
Hi
Can any one tell me how to work with field exit I know how to create them. I want to know how it works. Actually I want to create a field exit for T-CODE MIRO. Where I want to put the value ebeln of the PO Reference tab into the Assignment of details tab and make Assignment field disable.
Thanks in advanceHi,
Follow the Steps,
1. Go to CMOD transaction
2. From the menu "GOTO->TEXT ENHANCEMENTS->DATA ELEMENTS- ->NEW DE CUST DOCU".
3. In the displayed box specify the data element and
press either "CHANGE" or " Ref to screen" button
4. CHANGE button is for defining the documentation
5. "Ref. to screen" if for assigning the screen in which
a field has the this type data element.
Note: You should have used this data element for a
field in that screen.
6. Now it will ask for Function Module name, specify the
FM name and double click it. It will go to the editor.
7. Now using the Import parameters code accordingly
8. Activate and go back
9. Now "Assign the created program ( that is FM) to the
screen by specifying the Program name and Screen
number.
10. Now save and activate.
Note: No need to create a separate project for creating field exit through transaction CMOD.
I hope this is suffice.
Regs,
Venkat Ramanan -
Can u explain me how to work with OOPs ABAP
Hi,
Can u explain me how to work with OOPS Abap, If possible pls send me some sample programs regarding OOps concept used in Realtime.
Thanks.hii,
Please check this online document (starting page 1291).
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Also check this links as well.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.futureobjects.de/content/intro_oo_e.html
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
What is Object Orientation?
Object orientation (OO), or to be more precise, object-oriented programming, is a problem-solving method in which the software solution reflects objects in the real world.
A comprehensive introduction to object orientation as a whole would go far beyond the limits of this introduction to ABAP Objects. This documentation introduces a selection of terms that are used universally in object orientation and also occur in ABAP Objects. In subsequent sections, it goes on to discuss in more detail how these terms are used in ABAP Objects. The end of this section contains a list of further reading, with a selection of titles about object orientation.
Objects
An object is a section of source code that contains data and provides services. The data forms the attributes of the object. The services are known as methods (also known as operations or functions). Typically, methods operate on private data (the attributes, or state of the object), which is only visible to the methods of the object. Thus the attributes of an object cannot be changed directly by the user, but only by the methods of the object. This guarantees the internal consistency of the object.
Classes
Classes describe objects. From a technical point of view, objects are runtime instances of a class. In theory, you can create any number of objects based on a single class. Each instance (object) of a class has a unique identity and its own set of values for its attributes.
Object References
In a program, you identify and address objects using unique object references. Object references allow you to access the attributes and methods of an object.
In object-oriented programming, objects usually have the following properties:
Encapsulation
Objects restrict the visibility of their resources (attributes and methods) to other users. Every object has an interface, which determines how other objects can interact with it. The implementation of the object is encapsulated, that is, invisible outside the object itself.
Polymorphism
Identical (identically-named) methods behave differently in different classes. Object-oriented programming contains constructions called interfaces. They enable you to address methods with the same name in different objects. Although the form of address is always the same, the implementation of the method is specific to a particular class.
Inheritance
You can use an existing class to derive a new class. Derived classes inherit the data and methods of the superclass. However, they can overwrite existing methods, and also add new ones.
Uses of Object Orientation
Below are some of the advantages of object-oriented programming:
Complex software systems become easier to understand, since object-oriented structuring provides a closer representation of reality than other programming techniques.
In a well-designed object-oriented system, it should be possible to implement changes at class level, without having to make alterations at other points in the system. This reduces the overall amount of maintenance required.
Through polymorphism and inheritance, object-oriented programming allows you to reuse individual components.
In an object-oriented system, the amount of work involved in revising and maintaining the system is reduced, since many problems can be detected and corrected in the design phase.
Achieving these goals requires:
Object-oriented programming languages
Object-oriented programming techniques do not necessarily depend on object-oriented programming languages. However, the efficiency of object-oriented programming depends directly on how object-oriented language techniques are implemented in the system kernel.
Object-oriented tools
Object-oriented tools allow you to create object-oriented programs in object-oriented languages. They allow you to model and store development objects and the relationships between them.
Object-oriented modeling
The object-orientation modeling of a software system is the most important, most time-consuming, and most difficult requirement for attaining the above goals. Object-oriented design involves more than just object-oriented programming, and provides logical advantages that are independent of the actual implementation
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For basic stuff......
abap oops
http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
ABAP Business Development and Service Provisioning/ABAP Objects
General information
What is Object Orientation?
some blogs
A small tip for the beginners in OO ABAP
Object Oriented ABAP (OO-ABAP)
and others wiki OO Abap
cheers,
sharad
Edited by: sharad narayan on Apr 29, 2008 12:19 PM -
How to work with DTR and CBS?
Hi
I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
If possible can any one send me the screen shots how to work with these ?
Best Regards
Ravi Shankar BHi Ravi
For you to work with DTR and CBS, firstly u will have to configure JDI on server.
To configure the NWDI, please go through the links given below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
In Nutshell, following steps will be performed:
1) logon to Portal Devinf.
2) click on CMS
3) Go to landscape configurator
4) create domain
5) create tracks and add Software components in that track
6) runtime systems ( dev/qa etc are configured
7) in the transport studio, all the files listed are checked in through check - in tab.
8) they move to developement tab.
Once all these things are done, in your NWDS:
1) Setting the devbox host name and server port in Window -> Preferences -> SAP
J2EE Engine
2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
to check whether server is getting accessed from NWDS.
3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
4) In the DC perspective, in the Local DCs view, perform import configuration.
5) the dev track is not configured
6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
Thanks & regards,
Anupreet -
Could you please explain how to work with Outlier Correction
could you please explain how to work with Outlier Correction
Hi sr,
Actually an outlier correction is an historical value that lies the tolerance lane.
the apo sys calculate this tolerance lane on the basis of the sigma factor.
It then correct any historical value that lies outside the upper or lower band of this tolerance lane.
So, that it corresponds to the calculated ex- post value for that point in time.
this option is available in Master forecast profile /sapapo/mc96b in Univariate profile( control parameters) tab.
If you have set the outlier correction indicator, then the sys first calculate an ex-post forecast with the selected forecasting techniques.
In the next step, the sys calculates a tolerance threshold T.
where T is calculated as T = sigma * MAD (Mean Absolute Deviation)
Here the Sigma factor defines the width of the tolerance rangefor automatic outlier correction.
it defines the permissible number of standard deviations.
A small sigma factor means a low tolerance, and a large number of outliers that are detected and corrected.
The default Sigma factor is 1.25.
If you set the Sigma factor, SAP recommends that you set it betw 0.6 and 2.
I hope this is helpful for you.
Regards,
Pullaiah -
How to work with 360 video?
I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
Thank you,
PhilPhil,
Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
Drop your movie into a composition and apply CC Sphere to the video.
Then set the Render option in the effect to "Inside".
Under Shading set Ambient to 100% and Diffuse to 0%.
Then scale inside the effect until the image fills the screen.
Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
Let me know if you have any questions!
Trent -
How to work with EEWB tool in CRM and how to assign it to PCUI
Hi Friends,
Can any body will suggest me how to work with EEWB tool in CRM to add new fields ,i need to attach the fields to a GUI screen and same to PCUI also,
And how to attach a search help for those fields,is the tool will automatically will create the search helps or it is similar as we do in abap,
So can any body suggest me to get a material on this ,
Thaking you
Regards
Raghavendra PrasadPrasad
Following are the steps involved in general :
1. Select the filter Worklist and enter your name in the input field of the object list selection. Press the enter key. Your object list is displayed.
2. Place your cursor on the highest node(PROJECT BY XXXXXX). Select Create project from the context menu by right-clicking on it. You see the dialog box Create project.
3. Enter a project name, description, packages, and namespaces for each system used. Leave the dialog box by pressing the enter key.
Specify transport requests. The Project is created and appears in the object list.
4. Place your cursor on the new project in the object list and select Create extension in the context menu. You see the dialog box Create extension.
5. Enter a name and description. Define a Business Object and extension type. Press the enter key.The extension is created and appears in the object list below the project.
6. Place your cursor on the new extension in the object list and select Call wizard in the context menu. The wizard for the extension action starts automatically.
7. Fill in the input fields following the notes on screen and end the wizard by clicking on Complete.The extension tasks have been created and appear in the object list.
Project and extension are created !
Also take care that you have the Transport Requests and Save the Project and Extensions against a Development Class !
In general , EEW will automatically puts the fields on the Screen. We donot want to worry abt that !
The generated BADIs can be implemented to do some Checks(for example) !
I hope this helps !
Thanks
<b>Allot points if this helps !</b> -
Hi,
We use OEM (12c),have db (11.2,10.2/1).
How OEM works with database?
When oem initated a job aginst db,What are the steps preformed by OEM?What are the info updated in OEM DB and Normal DB regading jobs?And Where?
BrAt what point do you get this message?
Have a look at the Windows Service. Ensure the EM Agent is running. Your database and Listener may be running, but if the Agent is not running, you will not be able to see correct status.
Stop and start the Agent -
How to Work with Composite Primary Key
Hi All,
I'm working with Toplink JPA. Here I have A problem with inserting into database table which have composite Primary Key.
What I'm doing is, I have two tables. to maintain many to many relation between these two tables I created another intermediate table which consists of foreign Keys (reference) of above two tables.
Now these two foreign Keys in the Intermediate table made as composite Primary Keys.
When I'm trying to the data in the Intermediate table I'm getting the foreign Keys values are null..
could anyone suggest me how to work with composite Primary Keys
Thanks,
SatishI have the same problem, I have 3 tables with a join table joining them all. I have created an intermediate table entity. When I go to create a an entry, it says that I cannot enter null into "ID". Here is the SQl toplink generates:
INSERT INTO Z_AUTH_USER_AUTHORIZATION (CONTEXT_ID, AUTHORIZATION_ID, USER_ID) VALUES (?, ?, ?)
bind => [null, null, null]
Here are the classes:
-----------------------Join Table-----------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER_AUTHORIZATION")
public class AuthUserAuthorization implements Serializable{
@EmbeddedId
private AuthUserAuthorizationPK compId;
// bi-directional many-to-one association to AuthAuthorization
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "AUTHORIZATION_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthAuthorization authAuthorization;
// bi-directional many-to-one association to AuthContext
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "CONTEXT_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthContext authContext;
// bi-directional many-to-one association to AuthUser
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "USER_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthUser authUser;
---------------------------------------User table--------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER")
public class AuthUser implements Serializable, IUser{
@Id()
@SequenceGenerator(name = "AUTH_USER_ID_SEQ", sequenceName = "Z_AUTH_USER_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_USER_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 10)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authUser", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
-----------------------------------Context table-----------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_CONTEXT")
public class AuthContext implements Serializable, IContext{
@Id()
@SequenceGenerator(name = "AUTH_CONTEXT_ID_SEQ", sequenceName = "Z_AUTH_CONTEXT_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_CONTEXT_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authContext", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
----------------------------Authorization table-------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_AUTHORIZATION")
public class AuthAuthorization implements Serializable, IAuthorization{
@Id()
@SequenceGenerator(name = "AUTH_AUTHORIZATION_ID_SEQ", sequenceName = "Z_AUTH_AUTHORIZATION_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_AUTHORIZATION_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authAuthorization", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
I have tried to create the new entity several ways. I have tried to create one with the default constructor then set this entity on each of the other entities, I have also tried to pass in the entities to the join entity and set them there, but this doesn't work. Any help would be very appreciated!
Thanks,
Bill -
Hi, help me on how to work with datasets
hi,
this is bsv. can any one help me on how to work with datasets.
regards...
srinivasHi,
Use this update statement.
Update
nv2_audit_log
Set
qualifier = replace(qualifier,'NXPRI','NXUPM')
Where
qualifier like '%NXPRI%NXUPM%';
Hope this helps!
Regards,
Rajesh. -
Hi,
I want to create a small program in Xcode which create a excel speedsheet with fiew sheet and put data into sheet using
VisualBasicforApplication.framework.
What can i do, so that i can create/write excel files in xcode on Mac OS X?
Please help me as soon as possible.
ThanksOriginally Posted by skoltogyan
How to work with database in the Teaming ?
I need create some web-forms and store it in the database on the server.
Any example - how i can do this with Teaming ?
Please, Help me.
Serg
Hi Serg,
Not sure what you are looking for and I'm also no dev...
Maybe this link will help : Episode X: Teaming Templates | Novell User Communities -
How to create a master detail form using single table
Hi,
how to create a master detail form using single table.
Regards,
M. SatishHi
how to create a master detail form using single table.Make the Master ur pks the details the rest of ur data base field in the detail it's a mater of organizing fields on a form M-Detail...
Now What ?
Regards,
Amatu Allah -
How Ajax works with Struts framework
How Ajax works with Struts framework .
Thanks
RamkiSo we must write file name(like abc.do), If am using struts <html:link > tag like <html:like action="abc" >Click</html:link>, so with ajax we must call like <a href ="abc.do">Click</a> .
But there is a problem, if am using ,
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>/r/*</url-pattern>
</servlet-mapping>
or
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
here i am changing web.xml file based on client interest. At those situation we must change all jsp pages for <a href ="/r/abc">Click</a> .like,.
It's very difficult.
Is any other way to use ajax with Struts (Only struts tags)
Thanks
Ramki
Maybe you are looking for
-
I tryed to log into my id so I can download apps but I had to put my bank details in and even though I was just signing in it said I had to use a diffrent payment option even though it was all right, I need help with what to do
-
Hi I am setting up goldengate. I am fairly new to oracle. On th einstallation guide step 4.8.1 it is referring to extract user name, i do not recall making such user or is this the goldengate user? also what are the 4 other user names in the db for g
-
The right-click "move to group" menu item has disappeared, how can I get it back?
<blockquote>Locking duplicate thread.<br> Please continue here: [/questions/813094?]</blockquote><br> This menu option has been there since I started using the beta. It disappeared during one of the beta revisions, but was back for RC1. In fact, I ju
-
Line Order No doesnt match with Invoice line number
At the line level , the line order no doesnt match with the invocie line number ie. say for example in a sales order we have 3 lines 1. A 2. B 3. C where as in transaction at AR level the line no is different 1. B 2. A 3. C the customer wants in AR a
-
i lost my iphone4 and reported it to the company. my friend found it and wants to buy it since i got the iphone4s. what do i need to due?? anything??