How to works with a tree control in LV7.1
Hi,
I am needing some help with a tree control.
I have a tree control with two colluns, and I would like to double click on a item in the first collun and this iten
must be send to the second collun in the first blank line avaible.
Can you guys help me with that ?
Thanks
Eduardo
Hi
what erectly the problem is ?
Things are same in CE 7.1 also.
Check this [thread|Help on WebDynpro - Tree Structure in a Table;
BR
Satish Kumar
Edited by: satish jhariya on Mar 3, 2009 11:35 AM
Similar Messages
-
How ACR works with in-camera controls and ADR (Nikon D-lighting)
After using Bridge for years, exploring more intense in-camera color and ADR controls in my D700 has revealed something I did not know and wonder if there is a solution: Seen in the Bridge thumbnails, the photos show the effects of the in-camera settings, but when I click through to camera raw, the photos lose it, no color effects. How can I retain the in-camera choices in Camera Raw and thus in the save files in tiff which I prefer for working files. Thanks for answering what must be a very basic question.
The answer is actually very simple, Gary: What you are seeing is perfectly normal, expected behavior. It is as designed, and you cannot change that.
Those in-camera settings you reference apply exclusively to JPEG images, not to raw image captures.
What Bridge is showing you is not a rendering (conversion) of the raw image data, but rather the JPEG preview that is embedded by the camera at the time of recording the image and to which the camera does apply the camera settings. Depending on your Bridge preference settings, a new preview will be created once you apply your changes to the file.
Adobe Camera Raw is not designed to emulate the conversion performed by the camera manufacturer's software, whether in-camera or otherwise, but to preserve the entire range of characteristics of the image and offer you absolute control over the entire rendering process as well as to give you certain canned camera profiles to automate and/or speed the process.
Camera manufacturers design their raw conversion, in-camera and otherwise, to compress the shadows in order to hide digital chroma noise, and to provide an over-contrasty, over-saturated and over-sharpened look that appeals to the majority of consumers. Any savvy, experienced Adobe Camera Raw user can easily emulate said camera manufacturer's software and produce an identical result to the in-camera JPEG.
If you want to "retain the in-camera choices in Camera Raw and thus in the save files in tiff which [you] prefer for working files" you can either (a) shoot straight JPEGs, or (b) come up with your own Camera Raw presets that mimic the conversion of the camera manufacturer.
Raw means raw, uncooked, unsalted and unseasoned. The in-camera JPEG has already been cooked, salted and seasoned with pepper according to the camera manufacturer's criteria of what constitutes a good rendering of the image. A good, experienced cook can produce a much better, finer, more sophisticated cooked, salted and seasoned with a myriad herbs image from the raw capture with Adobe Camera Raw, in accordance with the skill, intention of the artist that produced the shot.
Adobe Camera raw gives you complete control, and it allows you to mimic or reproduce whatever look you want including the above described over-contrasty, over-saturated and over-sharpened look that appeals to the majority of consumers, once you learn how to use Adobe Camera Raw to its full extent. Here's an excellent place to start:
Real World Camera Raw with Adobe Photoshop CS5
Wo Tai Lao Le
我太老了 ( No connection to Adobe or to guru Schewe, author of THE book. )
EDITED formatting only.
Message was edited by: Tai Lao -
How to work with 360 video?
I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
Thank you,
PhilPhil,
Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
Drop your movie into a composition and apply CC Sphere to the video.
Then set the Render option in the effect to "Inside".
Under Shading set Ambient to 100% and Diffuse to 0%.
Then scale inside the effect until the image fills the screen.
Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
Let me know if you have any questions!
Trent -
Report with Dynamic tree control
I have a report with a TREE CONTROL.
<p>
A Tree is referenced to: CL_GUI_ALV_TREE_SIMPLE and is located on the left side of the screen.
<p>
See diagram below. The Tree has MULTI-LEVEL nodes and the user can click on any of the nodes which will
trigger a report (rellevant for that node) to appear in the REPORT container.
<p>
Everythign is working fine.
<p>
I now have a requirement to add a TREE ON/OFF functionality. I have added this by 'Freeing' TREE
container and by initializing when the user Turns ON the TREE. It is working fine, HOWEVER, when
it initilizes the TREE it is COLLAPSED and obviously does not point to the NODE that was clicked.
<p>
My goal is to retain the value of the NODE that was pressed and EXPAND the tree to that node and
highlight it... Please note that I have MULTI-LEVEL nodes and the user can double click on NODES
and ITEMS.
<p>
I tried using GET_SELECTED_NODES, but it only works if the user selects the LOWEST level node/item.
<p>
Any advise will be appreciated.
<p>
Also, as an alternative, I was thinking of resizing TREE container to WIDTH of 1 when the user PRESSES
TREE OFF and resizing back to width 200 when the user presses TREE ON. I could not find any methods
that would work with CL_GUI_DOCKING_CONTAINER.
Please help! Thank you in advance.
<br>
<br>
<img src="http://img237.imageshack.us/img237/6684/bdccz3.jpg" border="0"/></a>
<p>
<p>I have a report with a TREE CONTROL.
<p>
A Tree is referenced to: CL_GUI_ALV_TREE_SIMPLE and is located on the left side of the screen.
<p>
See diagram below. The Tree has MULTI-LEVEL nodes and the user can click on any of the nodes which will
trigger a report (rellevant for that node) to appear in the REPORT container.
<p>
Everythign is working fine.
<p>
I now have a requirement to add a TREE ON/OFF functionality. I have added this by 'Freeing' TREE
container and by initializing when the user Turns ON the TREE. It is working fine, HOWEVER, when
it initilizes the TREE it is COLLAPSED and obviously does not point to the NODE that was clicked.
<p>
My goal is to retain the value of the NODE that was pressed and EXPAND the tree to that node and
highlight it... Please note that I have MULTI-LEVEL nodes and the user can double click on NODES
and ITEMS.
<p>
I tried using GET_SELECTED_NODES, but it only works if the user selects the LOWEST level node/item.
<p>
Any advise will be appreciated.
<p>
Also, as an alternative, I was thinking of resizing TREE container to WIDTH of 1 when the user PRESSES
TREE OFF and resizing back to width 200 when the user presses TREE ON. I could not find any methods
that would work with CL_GUI_DOCKING_CONTAINER.
Please help! Thank you in advance.
<br>
<br>
<img src="http://img237.imageshack.us/img237/6684/bdccz3.jpg" border="0"/></a>
<p>
<p> -
Can u explain me how to work with OOPs ABAP
Hi,
Can u explain me how to work with OOPS Abap, If possible pls send me some sample programs regarding OOps concept used in Realtime.
Thanks.hii,
Please check this online document (starting page 1291).
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Also check this links as well.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.futureobjects.de/content/intro_oo_e.html
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
What is Object Orientation?
Object orientation (OO), or to be more precise, object-oriented programming, is a problem-solving method in which the software solution reflects objects in the real world.
A comprehensive introduction to object orientation as a whole would go far beyond the limits of this introduction to ABAP Objects. This documentation introduces a selection of terms that are used universally in object orientation and also occur in ABAP Objects. In subsequent sections, it goes on to discuss in more detail how these terms are used in ABAP Objects. The end of this section contains a list of further reading, with a selection of titles about object orientation.
Objects
An object is a section of source code that contains data and provides services. The data forms the attributes of the object. The services are known as methods (also known as operations or functions). Typically, methods operate on private data (the attributes, or state of the object), which is only visible to the methods of the object. Thus the attributes of an object cannot be changed directly by the user, but only by the methods of the object. This guarantees the internal consistency of the object.
Classes
Classes describe objects. From a technical point of view, objects are runtime instances of a class. In theory, you can create any number of objects based on a single class. Each instance (object) of a class has a unique identity and its own set of values for its attributes.
Object References
In a program, you identify and address objects using unique object references. Object references allow you to access the attributes and methods of an object.
In object-oriented programming, objects usually have the following properties:
Encapsulation
Objects restrict the visibility of their resources (attributes and methods) to other users. Every object has an interface, which determines how other objects can interact with it. The implementation of the object is encapsulated, that is, invisible outside the object itself.
Polymorphism
Identical (identically-named) methods behave differently in different classes. Object-oriented programming contains constructions called interfaces. They enable you to address methods with the same name in different objects. Although the form of address is always the same, the implementation of the method is specific to a particular class.
Inheritance
You can use an existing class to derive a new class. Derived classes inherit the data and methods of the superclass. However, they can overwrite existing methods, and also add new ones.
Uses of Object Orientation
Below are some of the advantages of object-oriented programming:
Complex software systems become easier to understand, since object-oriented structuring provides a closer representation of reality than other programming techniques.
In a well-designed object-oriented system, it should be possible to implement changes at class level, without having to make alterations at other points in the system. This reduces the overall amount of maintenance required.
Through polymorphism and inheritance, object-oriented programming allows you to reuse individual components.
In an object-oriented system, the amount of work involved in revising and maintaining the system is reduced, since many problems can be detected and corrected in the design phase.
Achieving these goals requires:
Object-oriented programming languages
Object-oriented programming techniques do not necessarily depend on object-oriented programming languages. However, the efficiency of object-oriented programming depends directly on how object-oriented language techniques are implemented in the system kernel.
Object-oriented tools
Object-oriented tools allow you to create object-oriented programs in object-oriented languages. They allow you to model and store development objects and the relationships between them.
Object-oriented modeling
The object-orientation modeling of a software system is the most important, most time-consuming, and most difficult requirement for attaining the above goals. Object-oriented design involves more than just object-oriented programming, and provides logical advantages that are independent of the actual implementation
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For basic stuff......
abap oops
http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
ABAP Business Development and Service Provisioning/ABAP Objects
General information
What is Object Orientation?
some blogs
A small tip for the beginners in OO ABAP
Object Oriented ABAP (OO-ABAP)
and others wiki OO Abap
cheers,
sharad
Edited by: sharad narayan on Apr 29, 2008 12:19 PM -
Could you please explain how to work with Outlier Correction
could you please explain how to work with Outlier Correction
Hi sr,
Actually an outlier correction is an historical value that lies the tolerance lane.
the apo sys calculate this tolerance lane on the basis of the sigma factor.
It then correct any historical value that lies outside the upper or lower band of this tolerance lane.
So, that it corresponds to the calculated ex- post value for that point in time.
this option is available in Master forecast profile /sapapo/mc96b in Univariate profile( control parameters) tab.
If you have set the outlier correction indicator, then the sys first calculate an ex-post forecast with the selected forecasting techniques.
In the next step, the sys calculates a tolerance threshold T.
where T is calculated as T = sigma * MAD (Mean Absolute Deviation)
Here the Sigma factor defines the width of the tolerance rangefor automatic outlier correction.
it defines the permissible number of standard deviations.
A small sigma factor means a low tolerance, and a large number of outliers that are detected and corrected.
The default Sigma factor is 1.25.
If you set the Sigma factor, SAP recommends that you set it betw 0.6 and 2.
I hope this is helpful for you.
Regards,
Pullaiah -
Scheduling Gantt: How to work with the "zoom-to-fit" drop-down
I'm trying to figure out how to work with the "zoom-to-fit" drop-down on the scheduling Gantt dvt control. It has choices in the drop-down that are not appropriate for my project. The documented purpose of this drop-down is to allow the user to zoom to a level that would allow a certain time range to "fit" within the current window. The choices start at "1 Week" and go up through "2 Weeks", "1 Month" etc. The problem is that the projects I'm displaying are generally just a couple of days long, and consist of many small tasks. So even 1 Week is too big. Also, no matter what I pick in this drop down, nothing happens.
So my questions are these:
1. Can I change the choices in this drop-down? If so, how do I do that?
2. If not, then how can I remove this drop-down? (I figure I probably can if I disable "zoom", but I don't want to do that.)
3. How do I get this to actually do something? I assume maybe I have to code some listener somewhere, but if so, how do I do that.
Thanks for any hints, tips and advice!Currently, we do not allow customization of zoom-to-fit. Please file an ER. We could add a param to featuresOff attribute to disable/remove zoom-to-fit from the toolbar without disabling/removing zoom.
-
How to work with EEWB tool in CRM and how to assign it to PCUI
Hi Friends,
Can any body will suggest me how to work with EEWB tool in CRM to add new fields ,i need to attach the fields to a GUI screen and same to PCUI also,
And how to attach a search help for those fields,is the tool will automatically will create the search helps or it is similar as we do in abap,
So can any body suggest me to get a material on this ,
Thaking you
Regards
Raghavendra PrasadPrasad
Following are the steps involved in general :
1. Select the filter Worklist and enter your name in the input field of the object list selection. Press the enter key. Your object list is displayed.
2. Place your cursor on the highest node(PROJECT BY XXXXXX). Select Create project from the context menu by right-clicking on it. You see the dialog box Create project.
3. Enter a project name, description, packages, and namespaces for each system used. Leave the dialog box by pressing the enter key.
Specify transport requests. The Project is created and appears in the object list.
4. Place your cursor on the new project in the object list and select Create extension in the context menu. You see the dialog box Create extension.
5. Enter a name and description. Define a Business Object and extension type. Press the enter key.The extension is created and appears in the object list below the project.
6. Place your cursor on the new extension in the object list and select Call wizard in the context menu. The wizard for the extension action starts automatically.
7. Fill in the input fields following the notes on screen and end the wizard by clicking on Complete.The extension tasks have been created and appear in the object list.
Project and extension are created !
Also take care that you have the Transport Requests and Save the Project and Extensions against a Development Class !
In general , EEW will automatically puts the fields on the Screen. We donot want to worry abt that !
The generated BADIs can be implemented to do some Checks(for example) !
I hope this helps !
Thanks
<b>Allot points if this helps !</b> -
Hi,
We use OEM (12c),have db (11.2,10.2/1).
How OEM works with database?
When oem initated a job aginst db,What are the steps preformed by OEM?What are the info updated in OEM DB and Normal DB regading jobs?And Where?
BrAt what point do you get this message?
Have a look at the Windows Service. Ensure the EM Agent is running. Your database and Listener may be running, but if the Agent is not running, you will not be able to see correct status.
Stop and start the Agent -
Can any one tell me how to work with field exit????
Hi
Can any one tell me how to work with field exit I know how to create them. I want to know how it works. Actually I want to create a field exit for T-CODE MIRO. Where I want to put the value ebeln of the PO Reference tab into the Assignment of details tab and make Assignment field disable.
Thanks in advanceHi,
Follow the Steps,
1. Go to CMOD transaction
2. From the menu "GOTO->TEXT ENHANCEMENTS->DATA ELEMENTS- ->NEW DE CUST DOCU".
3. In the displayed box specify the data element and
press either "CHANGE" or " Ref to screen" button
4. CHANGE button is for defining the documentation
5. "Ref. to screen" if for assigning the screen in which
a field has the this type data element.
Note: You should have used this data element for a
field in that screen.
6. Now it will ask for Function Module name, specify the
FM name and double click it. It will go to the editor.
7. Now using the Import parameters code accordingly
8. Activate and go back
9. Now "Assign the created program ( that is FM) to the
screen by specifying the Program name and Screen
number.
10. Now save and activate.
Note: No need to create a separate project for creating field exit through transaction CMOD.
I hope this is suffice.
Regs,
Venkat Ramanan -
How to Work with Composite Primary Key
Hi All,
I'm working with Toplink JPA. Here I have A problem with inserting into database table which have composite Primary Key.
What I'm doing is, I have two tables. to maintain many to many relation between these two tables I created another intermediate table which consists of foreign Keys (reference) of above two tables.
Now these two foreign Keys in the Intermediate table made as composite Primary Keys.
When I'm trying to the data in the Intermediate table I'm getting the foreign Keys values are null..
could anyone suggest me how to work with composite Primary Keys
Thanks,
SatishI have the same problem, I have 3 tables with a join table joining them all. I have created an intermediate table entity. When I go to create a an entry, it says that I cannot enter null into "ID". Here is the SQl toplink generates:
INSERT INTO Z_AUTH_USER_AUTHORIZATION (CONTEXT_ID, AUTHORIZATION_ID, USER_ID) VALUES (?, ?, ?)
bind => [null, null, null]
Here are the classes:
-----------------------Join Table-----------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER_AUTHORIZATION")
public class AuthUserAuthorization implements Serializable{
@EmbeddedId
private AuthUserAuthorizationPK compId;
// bi-directional many-to-one association to AuthAuthorization
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "AUTHORIZATION_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthAuthorization authAuthorization;
// bi-directional many-to-one association to AuthContext
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "CONTEXT_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthContext authContext;
// bi-directional many-to-one association to AuthUser
@ManyToOne(fetch = FetchType.EAGER)
@JoinColumn(name = "USER_ID", referencedColumnName = "ID", nullable = false, insertable = false, updatable = false)
private AuthUser authUser;
---------------------------------------User table--------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_USER")
public class AuthUser implements Serializable, IUser{
@Id()
@SequenceGenerator(name = "AUTH_USER_ID_SEQ", sequenceName = "Z_AUTH_USER_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_USER_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 10)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authUser", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
-----------------------------------Context table-----------------------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_CONTEXT")
public class AuthContext implements Serializable, IContext{
@Id()
@SequenceGenerator(name = "AUTH_CONTEXT_ID_SEQ", sequenceName = "Z_AUTH_CONTEXT_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_CONTEXT_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authContext", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
----------------------------Authorization table-------------------------------------------------
@Entity()
@Table(name = "Z_AUTH_AUTHORIZATION")
public class AuthAuthorization implements Serializable, IAuthorization{
@Id()
@SequenceGenerator(name = "AUTH_AUTHORIZATION_ID_SEQ", sequenceName = "Z_AUTH_AUTHORIZATION_ID_SEQ")
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "AUTH_AUTHORIZATION_ID_SEQ")
@Column(name = "ID", unique = true, nullable = false, precision = 8)
private Integer id;
// bi-directional many-to-one association to AuthUserAuthorization
@OneToMany(mappedBy = "authAuthorization", fetch = FetchType.EAGER)
private java.util.Set<AuthUserAuthorization> authUserAuthorizations;
I have tried to create the new entity several ways. I have tried to create one with the default constructor then set this entity on each of the other entities, I have also tried to pass in the entities to the join entity and set them there, but this doesn't work. Any help would be very appreciated!
Thanks,
Bill -
Hi, help me on how to work with datasets
hi,
this is bsv. can any one help me on how to work with datasets.
regards...
srinivasHi,
Use this update statement.
Update
nv2_audit_log
Set
qualifier = replace(qualifier,'NXPRI','NXUPM')
Where
qualifier like '%NXPRI%NXUPM%';
Hope this helps!
Regards,
Rajesh. -
Hi,
I want to create a small program in Xcode which create a excel speedsheet with fiew sheet and put data into sheet using
VisualBasicforApplication.framework.
What can i do, so that i can create/write excel files in xcode on Mac OS X?
Please help me as soon as possible.
ThanksOriginally Posted by skoltogyan
How to work with database in the Teaming ?
I need create some web-forms and store it in the database on the server.
Any example - how i can do this with Teaming ?
Please, Help me.
Serg
Hi Serg,
Not sure what you are looking for and I'm also no dev...
Maybe this link will help : Episode X: Teaming Templates | Novell User Communities -
How Ajax works with Struts framework
How Ajax works with Struts framework .
Thanks
RamkiSo we must write file name(like abc.do), If am using struts <html:link > tag like <html:like action="abc" >Click</html:link>, so with ajax we must call like <a href ="abc.do">Click</a> .
But there is a problem, if am using ,
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>/r/*</url-pattern>
</servlet-mapping>
or
<servlet-mapping>
<servlet-name>MainServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
here i am changing web.xml file based on client interest. At those situation we must change all jsp pages for <a href ="/r/abc">Click</a> .like,.
It's very difficult.
Is any other way to use ajax with Struts (Only struts tags)
Thanks
Ramki -
How to work with DTR and CBS?
Hi
I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
If possible can any one send me the screen shots how to work with these ?
Best Regards
Ravi Shankar BHi Ravi
For you to work with DTR and CBS, firstly u will have to configure JDI on server.
To configure the NWDI, please go through the links given below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
In Nutshell, following steps will be performed:
1) logon to Portal Devinf.
2) click on CMS
3) Go to landscape configurator
4) create domain
5) create tracks and add Software components in that track
6) runtime systems ( dev/qa etc are configured
7) in the transport studio, all the files listed are checked in through check - in tab.
8) they move to developement tab.
Once all these things are done, in your NWDS:
1) Setting the devbox host name and server port in Window -> Preferences -> SAP
J2EE Engine
2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
to check whether server is getting accessed from NWDS.
3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
4) In the DC perspective, in the Local DCs view, perform import configuration.
5) the dev track is not configured
6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
Thanks & regards,
Anupreet
Maybe you are looking for
-
HT1229 What happens to photos in an album in iPhoto on Mac when upgrading to Yosemite.
What happens to all the photos in iPhoto when upgrading to Yosemite. My pictures are in an album to be made into a photobook with Shutterfly or another service but it is not entirely ready to go. I would not want to loose this album, took me a long
-
Has anyone seen this photo effect before and if so do you know the process involved?
I have seen this photo effect before and was wondering if anyone on the forum has any knowledge of how it produced in Photoshop. I am sure Poster Edges has something to do with it but I can not seem to replicate the effect.
-
Was in the History to get to a site I visited earlier this morning, but it is claiming that I visited a handful of sites from a training that I took last week. Since it was a site I have been to, I no longer suspect anything suspicious. Why would Fir
-
Sort array method...
Hi all, I have a float array of many rows and two columns. I was wondering whether it is possible to sort this array with calls of java api, just be specifing the column index number. Thank you.
-
I can't buy apps and i can't upgrade
please i having problam upgrading apps and buy new apps there a note that say an erorr ....13 try latter