How to wrap a text in xml?

There was this example where they had listed down a text content which had wrapped within a cell. I downloaded that XML code and then tried embedding in an HTML page. When the XML file is opened in excel it is appearing wrapped but when appearing in the embedded HTML, the wrap is lost and the text appears in just one line.

See
[http://forums.sun.com/thread.jspa?messageID=10391430]

Similar Messages

  • How to wrap the text in column headers?

    Hi Friends,
    Can anyone please suggest how to wrap the text in column headers of a Java WebDynpro table?
    I believe that caption is the only UI element that a column header can have and it does not allow wrapping of the text.
    My original requirement is as follows,
    In a table I need to dynamically set the width of the columns according to the width configured by the user in some other view. All the columns of the table are dynamically rendered.
    Now what happens is when the user sets the width of the column to a rather low value, say 15 pixels, then the column is displayed like
    Supplier Catalog Name
    Sheila
    Catalog
    Name
    Dropdown
    As you can see it looks rather odd.
    Supplier Catalog Name is the header of the column and I use IWDCaption for header.
    Sheila Catalog Name Dropdown is the value of a particular row at the specified column. I am using a TextView as the TableCellEditor.
    I think what is happening here is that the framework wraps the text in the TextView according to the width specified (15px) and then the column width is extended because it can not accommodate the text (Supplier Catalog Name ) of the column header.
    We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
    I searched some forums and many people have suggested using scrollable columns but I don't understand how it will help in wrapping the text in a column header.
    Any help would be of great advantage.
    Thanks
    Amit

    Hi Deepti,
    Thanks a lot for the answer but the option that you have specified does not wrap the text. Instead it truncates the text being displayed and only the substring of the text which could be displayed in the given pixels is displayed.
    I need to show the whole text wrapped (Meaning if the width of the column is not sufficient then the text goes into the next line).
    Ayyapparaj,
    Thanks to you too for an helpful answer. It seems that the Netweaver has finally come up with a way to wrap the text in the column headers but as Manoj pointed out, I do not see the property headerTextWrapping  for a table column, Can you please specify which version of netweaver supports it?
    We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
    Thanks
    Amit Kapoor

  • How to wrap the text in JTextPane

    hi all,
    I have a problem with JTextPane. I have a JPanel which have 4 JButtons, one Details button and one JTextPane. I have set JTextPane to JScrollPane. Thing is when i press the Details button the JTextPane must be visible. Window size is changing. can any one say how to wrap the text in the JTextPane.

    By default text in a JTextPane will wrap, so I don't understand the question.
    Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/text.html]Using Text Components for a working example.

  • How to wrap the text in a label component

    I'm displaying a text in the label component and the output is displayed on the plasma display(It is a java application running on a pc and output is given to plasma display). But the text size is more and getting cut at the edge on the display. How can I wrap the text automatically.

    See
    [http://forums.sun.com/thread.jspa?messageID=10391430]

  • ADF 11g + How to wrap the text in a goimagelink

    Hi All,
    I'm displaying some list of goimagelinks, for which the information is being retrieved from the database. Now to align the width in between the imagelinks properly, I need to wrap the text of the go image link. Any suggestions, will help me a lot.
    Thanks All in Advance. Below is the code snippet for the same.
    Thanks & Regards,
    Dharmathej M
    <af:panelFormLayout id="pfl6" rows="3" maxColumns="3"
    labelWidth="30"
    inlineStyle="text-align:justify;">
    <af:iterator id="i6"
    value="#{bindings.LP_Applications1.collectionModel}"
    var="appiter"
    rows="#{bindings.LP_Applications1.rangeSize}">
    <af:goImageLink text="#{appiter.bindings.AppName.inputValue}"
    id="gil2"
    icon="#{appiter.bindings.Icon.inputValue}"
    iconPosition="leading"
    inlineStyle="font-size:small; font-family:Verdana, Arial, Helvetica, sans-serif;"
    destination="#{appiter.bindings.Url.inputValue}"
    shortDesc="#{appiter.bindings.ShortDesc.inputValue}"
    targetFrame="#{appiter.bindings.ExtLink.inputValue == 'T' ? '_blank' : '_self' }"/>
    <af:spacer width="70" height="10"/>
    </af:iterator>
    </af:panelFormLayout>
    ################################################################

    Try the CSS <tt>display</tt> property in combination with some fixed width, for example:
    <af:goImageLink ... inlineStyle="display:inline-block; width:80px;">

  • How to wrap the text in a popup LOV item ( Apex 4.0 )

    Hi
    I have a popup LOV type item with a very long string value
    I would like to format the item so itr will be shorter but have the string wrap to multiple lines.
    Can you let me know how that can be achieved ?
    thanks
    O

    Hmm.. I don't know about that.
    I actually already managed to change the width of a specific popup element by putting the following in the region footer :
    <script type="text/javascript">
    $x('P3_CONTRACT').style.height="20px";
    </script>
    that works fine and only impacts that specific element.
    However , Since I know next to nothing of HTML and Javascript , I could not figure out the code to put to make the text wrap.
    your solution suggests that it will take care of the width , but will it cause the words to wrap ?
    thanks
    O
    Edited by: Orna Weisman on Apr 30, 2012 7:08 AM
    Edited by: Orna Weisman on Apr 30, 2012 7:15 AM

  • How to wrap the text in a jTextArea

    Hello all,
    I am currently developing a simple simulation program for our scientific research group. My boss asked me to employ the program with a GUI. However, I am new to Java Swing. It is nice to have you guys that may provide a helping hand to my problem.
    My problem is with the jTextArea. Because my result to be displayed in jTextArea is lengthy and its length varies. The way I extract the result is to use a String to hold all of the results and directly pass it to the jTextArea. However, It is lope-sided and not quite user-friendly. Is there any function that I can use so that the text can be wrapped and that the user doesn't need to scroll left or right to view the results?
    Thanks in advance(:
    Message was edited by:
    Shahn
    Message was edited by:
    Shahn

    am currently developing a simple simulation program for our scientific
    research group. My boss asked me to employ the program with a GUI.
    However, I am new to Java Swing. It is nice to have you guys that may provide
    a helping hand to my problem.something is amiss.
    you're a developer (new to swing is irrelevant) and you don't know how to read the api docs?
    there are only 6 set...() methods (apart from inherited) and what you want is 2 of them.

  • HOW TO PRINT LONG TEXT OF 255 CHARACTER IN ALV GRID instead of132 Char's

    Hi sir/mam
    i'm sreekar can any one help me on this please
    "As I took a variable 'STR' with 255 length, But still ALV GRID DISPLAYS the same 132 characters, and
    When I download the report into excel it is showing the 250 charactered text"
    how can i print it in alv grid
    FORM BUID_CATALOG .
      DATA : COL_POS TYPE I.
      COL_POS = COL_POS + 1.
    *--DECLARING FIELDCATALOG FOR HEADER
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'EBELN'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Purch.doc.no.'(002).
      LT_FCAT-REF_FIELDNAME = 'EBELN'.
      LT_FCAT-REF_TABNAME = 'EKKO'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'BEDAT'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Po Date'(003).
      LT_FCAT-REF_FIELDNAME = 'EBDAT'.
      LT_FCAT-EDIT_MASK = '__.__.____'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'EKGRP'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Purch.Grp'(004).
      LT_FCAT-REF_FIELDNAME = 'BKGRP'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'EKNAM'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Purch.Grp. Name'(005).
      LT_FCAT-REF_FIELDNAME = 'EKNAM'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'LIFNR'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Vendor No.'(006).
      LT_FCAT-REF_FIELDNAME = 'ELIFN'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'NAME1'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Vendor Name'(007).
      LT_FCAT-REF_FIELDNAME = 'NAME1_GP'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'ZTERM'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Pay.Code'(008).
      LT_FCAT-REF_FIELDNAME = 'ZTERM'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'TEXT1'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Own explanation'(009).
      LT_FCAT-REF_FIELDNAME = 'DZTERM'.
      LT_FCAT-OUTPUTLEN = '30'.
      LT_FCAT-DDICTXT = 'L'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'WAERS'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Curr'(010).
      LT_FCAT-REF_FIELDNAME = 'WAERS'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
      LT_FCAT-COL_POS = COL_POS.
      LT_FCAT-FIELDNAME = 'NETWR'.
      LT_FCAT-TABNAME = 'LT_FINAL'.
      LT_FCAT-SELTEXT_L = 'Net Value'(011).
      LT_FCAT-REF_FIELDNAME = 'BWERT'.
      APPEND LT_FCAT.
      CLEAR LT_FCAT.
    ENDFORM.                    " BUID_CATALOG
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          I_BUFFER_ACTIVE         = 'X'
          I_BACKGROUND_ID         = 'ALV_BACKGROUND'
          IS_LAYOUT               = GS_LAYOUT
          IT_FIELDCAT             = LT_FCAT[]
          I_SAVE                  = G_SAVE
          IS_VARIANT              = GS_VARIANT
        IMPORTING
          E_EXIT_CAUSED_BY_CALLER = G_EXIT_CAUSED_BY_CALLER
          ES_EXIT_CAUSED_BY_USER  = GS_EXIT_CAUSED_BY_USER
        TABLES
          T_OUTTAB                = LT_FINAL[]
        EXCEPTIONS
          PROGRAM_ERROR           = 1
          OTHERS                  = 2.
      IF SY-SUBRC = 0.
        IF G_EXIT_CAUSED_BY_CALLER = 'X'.
        ELSE.
          IF GS_EXIT_CAUSED_BY_USER-BACK = 'X'.       "F3
            EXIT.
          ELSE.
            IF GS_EXIT_CAUSED_BY_USER-EXIT = 'X'.     "F15
              LEAVE TO SCREEN 1000.
            ELSE.
              IF GS_EXIT_CAUSED_BY_USER-CANCEL = 'X'. "F12
                LEAVE TO SCREEN 1000.
              ELSE.
                EXIT.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ELSE.
      ENDIF.
    ENDFORM.                    " DISPLAY_DATA
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT = SY-MANDT
    ID = 'F15' "ls_thead-tdid PAYMENT TERMS
    LANGUAGE = SY-LANGU "ls_thead-tdspras "CURRENT LANGUAGE 'E'
    NAME = NAME "ls_thead-tdname PO NUMBER LW_EKKO-EBELN
    OBJECT = 'EKKO' "ls_thead-tdobject TABLE NAME EKKO
    IMPORTING
    HEADER = HTEXT
    TABLES
    LINES = LTEXT
    EXCEPTIONS
    ID = 1
    LANGUAGE = 2
    NAME = 3
    NOT_FOUND = 4
    OBJECT = 5
    REFERENCE_CHECK = 6
    WRONG_ACCESS_TO_ARCHIVE = 7
    OTHERS = 8.
    IF SY-SUBRC = 0.
    LOOP AT LTEXT.
    IF LTEXT-TDLINE NE ''.
    MOVE LTEXT-TDLINE TO WA_WORD-TEXT.
    APPEND WA_WORD TO LT_SENTENCE.
    ENDIF.
    ENDLOOP.
    ENDIF.
    LOOP AT LT_SENTENCE INTO WA_WORD.
    COUNT = COUNT + 1.
    IF COUNT = 1.
    STR = WA_WORD-TEXT.
    LW_FINAL-TEXT1 = STR.
    ELSEIF COUNT = 2 OR COUNT = 3 OR COUNT = 4 OR COUNT = 5 OR COUNT = 6 OR COUNT = 7 OR COUNT = 8.
    CONCATENATE STR WA_WORD-TEXT INTO STR SEPARATED BY SPACE.
    LW_FINAL-TEXT1 = STR.
    ENDIF.
    ENDLOOP.

    can you provide an example of how to wrap the text i have like this please see the below code and correct if any errors
    FORM GET_TEXT_LINES .
      DATA :NAME TYPE THEAD-TDNAME.
      NAME = LW_EKKO-EBELN.
      V_TABIX = SY-TABIX.
    CALLING FUNCTION READ_TEXT FOR PAYMENT TEXTS
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          CLIENT                  = SY-MANDT          "CLIENT ID 200/600/400
          ID                      = 'F15' "ls_thead-tdid "PAYMENT TERMS TEXT ID 'F15'
          LANGUAGE                = SY-LANGU "ls_thead-tdspras "CURRENT LANGUAGE 'E'
          NAME                    = NAME "ls_thead-tdname "PO NUMBER LW_EKKO-EBELN
          OBJECT                  = 'EKKO' "ls_thead-tdobject "TABLE NAME EKKO
        IMPORTING
          HEADER                  = HTEXT "LS_THEAD
        TABLES
          LINES                   = LTEXT "LT_LINES[]
        EXCEPTIONS
          ID                      = 1
          LANGUAGE                = 2
          NAME                    = 3
          NOT_FOUND               = 4
          OBJECT                  = 5
          REFERENCE_CHECK         = 6
          WRONG_ACCESS_TO_ARCHIVE = 7
          OTHERS                  = 8.
      IF SY-SUBRC = 0.
        LOOP AT LTEXT.
          IF LTEXT-TDLINE NE ''.
            MOVE LTEXT-TDLINE TO WA_WORD-TEXT.
            APPEND WA_WORD TO LT_SENTENCE.
          ENDIF.
        ENDLOOP.
      ENDIF.
    Word Wrap the text in multiple lines
      LOOP AT LT_SENTENCE INTO WA_WORD.
        CALL FUNCTION 'RKD_WORD_WRAP'
          EXPORTING
            TEXTLINE            = WA_WORD-TEXT
             OUTPUTLEN           = 100
          TABLES
            OUT_LINES           = LT_SENTENCE
          EXCEPTIONS
            OUTPUTLEN_TOO_LARGE = 1
            OTHERS              = 2.
        IF SY-SUBRC EQ 0.
             IF not LT_SENTENCE IS INITIAL.
          READ TABLE LT_SENTENCE INTO WA_WORD INDEX v_tabix.
          LW_FINAL-TEXT1 = WA_WORD_TEXT.
          MODIFY LT_FINAL FROM LW_FINAL INDEX V_TABIX.
      ENDLOOP.
      CLEAR: LT_SENTENCE.
    ENDFORM.                    " GET_TEXT_LINES
    *&      Form  LAYOUT_INIT
          text
         -->P_GS_LAYOUT  text
    FORM LAYOUT_INIT  USING RS_LAYOUT TYPE SLIS_LAYOUT_ALV.
    *"Build layout for list display
      RS_LAYOUT-DETAIL_POPUP      = 'X'.
    ENDFORM.                    " LAYOUT_INIT
    *&      Form  EVENTTAB_BUILD
          text
         -->P_GT_EVENTS[]  text
    FORM EVENTTAB_BUILD  USING RT_EVENTS TYPE SLIS_T_EVENT.
    *"Registration of events to happen during list display
      DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          I_LIST_TYPE = 0
        IMPORTING
          ET_EVENTS   = RT_EVENTS.
      READ TABLE RT_EVENTS WITH KEY NAME = SLIS_EV_AFTER_LINE_OUTPUT
                               INTO LS_EVENT.
      IF SY-SUBRC = 0.
        APPEND LS_EVENT TO RT_EVENTS.
      ENDIF.
    ENDFORM.                    " EVENTTAB_BUILD
    *&      Form  AFTER_LINE_OUTPUT
          text
    -->  p1        text
    <--  p2        text
    FORM AFTER_LINE_OUTPUT.
    CLEAR :COUNT,LT_SENTENCE.
    LOOP AT LT_SENTENCE INTO WA_WORD.
      READ TABLE LT_SENTENCE INTO WA_WORD INDEX V_TABIX.
      CHECK SY-SUBRC = 0.
    CALL FUNCTION 'RKD_WORD_WRAP'
        EXPORTING
          TEXTLINE  = WA_WORD-TEXT
          OUTPUTLEN = 20
        TABLES
          OUT_LINES = LT_SENTENCE.
      DESCRIBE TABLE LT_SENTENCE LINES V_TABIX.
      CHECK V_TABIX > 1.
        COUNT = COUNT + 1.                                                   
        IF COUNT = 1.                                                      
          STR = WA_WORD-TEXT.                                                         
          LW_FINAL-TEXT1 = STR.                                          
        ELSEIF COUNT = 2 OR COUNT = 3 OR COUNT = 4 OR COUNT = 5 OR COUNT = 6 OR COUNT = 7 OR COUNT = 8.
          CONCATENATE STR WA_WORD-TEXT INTO STR SEPARATED BY SPACE.
          LW_FINAL-TEXT1 = STR.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " AFTER_LINE_OUTPUT

  • Wrapping the text on the confirmation dialog

    Can any one pls tell me how to wrap the text on a confirmation dialog?
    thanks in advance.
    regards
    Lakshminarayanan.V

    Hi,
    Currently this is simply not possible. Probably later TextView UI element will be enhanced to support this (at least, this feature is at "Whish List", search this forum for word POLL), and confirmation dialogs will inherit desired behavior automatically.
    For now you have to create your own component and use it pop-over window as confirmation dialog. In your component you may either use TextArea for multi-line display (quick and ugly) or split string into several context attributes and display them using several TextView UI elements (either dynamically created or pre-created till some reasonable maximum, say, 5 lines <-> 5 controls)
    VS

  • How to wrap text around a table

    I'm new to Pages. The first thing I tried to do was play with tables, because they are the biggest headache in Microsoft Word. However, I ran into a problem right away--I cannot figure out how to wrap text tightly around a table so that the table is surrounded by text on all four sides.
    Does anyone know how to do this? Seems very basic. There is even a button that shows what I want (Text Wrap drop-down --> Around), but when I click on it, nothing happens.

    Peter,
    I can recreate the appearance with five hard returns after the first paragraph, or instead, changing the After Paragraph spacing to 116 pt. Did this with Baskerville Regular 12 pt with line spacing set at 1. Same Arrange settings as shown by OP.

  • How to create a text file or XML file  and add content through  code into it...

    Hi Everyone,
    How to create a text file and add content through the code to the text file eform javascript ......orelse can we create a text file in life cycle designer...
    Else say how to create a new XML file through the code and how some content like Example "Hello World".

    You can create a text file as a file attachment (data object) using the doc.createDataObject and doc.setDataObjectContents:
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.450.html
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.528.html
    You can then export the file with the doc.exportDataObject method:
    http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.463.html
    This won't work with Reader if it hasn't been given the file attachment usage right with LiveCycle Reader Extensions.

  • In Pages how can I add text under a Photo and keep word wrap correct?

    Creating pages of a book, I'm having no trouble adding a photo to the body of the text and wrapping the text. However I want to add a description of the photo just below the photo, but have not been able to. The text box is not in the correct location and moving it around disturbs the adjacent wrapped text. Advice please. Thanks.

    You will have to use the text box. A lot will depend on how long the caption is. If it's a one-liner, I can usually deselect the wrap and squeeze it in the space between the picture and the main text. If it's several lines long you will have to use the wrap but you can reduce the extra space. Or try grouping it with the picture.
    Walt

  • How to wrap the heading text in alv.

    HI all,
          I need help, how to wrap the heading text in alv.
    can any help ... plz..
    Advanced Thanks
    Regards
    GUhapriyan

    Hello GuhaPriyan,
    I assume that you're referring to the ALV Grid's title. The maximum length for this title is 70 characters and this would generally fit in the one line.
    Are you intending to wrap it because you purposefully want the text to come in two lines? In that case, I'm not sure that it's possible.
    But otherwise, there's an option in the Layout called SMALLTITLE. You can set this attribute so that the title would be displayed in a amaller font and hopefully, all of your text shows up on the screen.
    Regards,
    Anand Mandalika.

  • How to style text with XML import using character style that is in a group (aid:cstyle = "group1"."style1") ?

    Hello, I am using an XML file to import text into InDesign page items. Everything works well using the attribute "aid:cstyle = style1" but since the introduction of InDesign groups, our users want to use them but we do not know how to reference them in the xml attribute.
    I saw somewhere on the internet that you should use "aid:cstyle = group1:style1" or "aid:cstyle = group1|style1" but both won't work. They simply create a new ungrouped style name "group1:style1" or "group1|style1"
    So what is the right formula ?
    Thanks

    Tagged Text is nice but all the copy in your page item is one big block, no way to separate and track individual values, say in your page item you have a description and a sale price, you can't update the price without reimporting the description as well. We use many fields inside an individual page item and just as one example we need to be able to update all prices on the page without modifying anything else that shares the page items with the prices. Also XML updates you can trigger an update for the whole document in one operation, while with Tagged Text you have to "place" your text file for each individual page item you are modifying (even with scripting you call the place function as many times as you have page items). So say you have a page or document with 200 boxes across multiple layers that is a lot of individual actions.
    Anyway back to my problem.
    I've never used Mapping tas to styles before, but running some tests here I clearly don't understand it. If my text is already tagged and I map a style to a tag, it untags all my individual text elements and leaves only the page item tag, and doesn't style my text... I'm going to try and read more on this.

  • How do I get text to wrap around a jpeg photo. Pages instructions don't eem to work for me,

    How do I get text to wrap around a jpeg photo. Pages instructions don't seem to work for me. I'm just beginning to use Pages for other than simple word processing.

    I am creating a photo album with captions and have tried to have one caption wrap around a photo image that is part of a series of three overlapping and descending images. I have selected the photo, clicked Inspector etc. with no luck. I did read a previous answer re floating and noticed that both my text and my image have inline in light colour and floating in dark, which I presume means they are both inline. When I try to click on Floating in Object Placement, nothing happens. The option doesn't appear to be "available", unlike the wrap options below, which do light up and indicate what I want to happen. It just doesn't happen and I don't know how to solve the problem.
    I have had to replace my older computer on which I did all of these projects (newsletters, albums, etc.) with an old version of InDesign, which no longer works with the newer OS 10.6. So I'm trying to learn how to do the same types of things with Pages, and it's somewhat frustrating, since text wrap was quite simple with InDesign.
    Stan

Maybe you are looking for

  • FORGOT MY REMOTE FOR APPLE TV

    how do i connect to apple tv without my remote I have my I PHONE with me with no Remote I need to be able to configure my Apple TV to work with my I PHONE Remote app

  • Is there a way to crack this file encryption code?

    The text below is a little irrelevant for the question, it explains how I discovered the code: I was randomly making weird binary operations on my notebook (I mean, I REALLY do that, actually...), when I had an idea. After a few operations, I found o

  • Possible to create a JAX-WS, session-bean-based webservice for WebLogic 10?

    All, sorry - but I'm going a bit crazy here. I have been unable to figure out the secret hand-shakes for developing a session-bean-based web service that will run properly under Weblogic 10.0. There are examples out there on how to create webservices

  • When can support the AS3 swf files in the Director?

    AS3 has existed for a very long time, but Director 11 con't support it. So, I want know that when can support the AS3 swf files in the Director? Thanks.

  • [GE70 2OE] Downgrade to Windows 7 (or fix undetected device)

    Hello, I wanted to know if there was an easy and/or safe way to downgrade my Windows 8.1 laptop to Windows 7 (I have Home Premium). Checking the product page on MSI shows BIOS/Drivers/Firmware links for Win7 too. Do I need to install those? How? When