How to write a condition in BEX Query Designer
Hi
How can i write a condition in Query Designer
Scenario
An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
My requirment
Count all the policies(valid) by employee on a ranges basis exception reporting
(0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
As per the requirment is to show policies which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
But i char assigment of a condition i find 4 option
How can i achieve this
Thanks
Hi Aurun,
Thanks for the help,Really appreciated
As this is my first enhancement using ABAP & CMOD
What type of key (either Access or developer ) do i require to perform the following enhancement......so that i can raise request with basis team
I shall be great ful if u can asnwer below question
First, you need to create a variable for expiry date with processing type as customer exit, and then give the necessary info.
In details tab, unchk ready for input as we wont be taking the value from the prompt.
Now go to CMOD transaction.
Open the correcsponding project which has the exit code
(How can i identify the project which has exit code)
and go to ZXRSRU001 module inside taht.
Go to the module where u write the exit.
(How to locate the required module)
Then, under i step 1, write the code:
IF I_STEP = 1.
CASE V_NAME (What is 'V_NAME',Is it my variable technical name)
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.
Similar Messages
-
Options in Assignment of Condition in BEX Query Designer
Hi Experts,
I am trying to define a condition in BEX Query Designer.
I defined my condition and bit confused with Characterstic Assignment
What Happens if is select 9What is the difference)
1) All Characterstic in the Drilldown Independtly
2)Most Detailed Characterstic Along the Rows
3)Most Detailed Characterstic Along Columns and
4)Individual Chars and Chars.Combinations
Thankshi,
chk the link
Query creation
http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5625e09411d2acb90000e829fbfe/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/42/d21c1f46076bb2e10000000a1553f6/content.htm
Ramesh -
Usage of formulas in conditions in BEx Query Designer
Hi guys,
does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
Any ideas or are there any bugy in the BEx Query Designer?
Thanks a lot + best regards,
ClemensHi Clemens,
I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
1) Condition is marked as Active.
2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
Now you are ready to use the condition.
Regards,
Durgesh. -
How to create a formula based condition in bex query designer
hi all,
i have scenario in query designer where i need to calculate Key performance indexes based on characters and key figures iam using.for example the condition is like:
"if call received is less than call projection then give call received else null"
how and where to define the condition and i need to name the condition to display it seperatly.please help me in this issue.
regards
Vamshi D Krishnahi you have to break down your conditions and then code for them.
for e.ge.
if actual == 0
vart = 0.
else if actual-target ==0
vart = 0.001
else
vart = actual -target
endif
endif
now we start with first condition use operators from boolean catagory
(Actual != 0)*(other amount)
this solves first if condition... if actual = 0 value actual != 0 will be zero we got our desired value.
if other case then we have give else condition.
(Actual != 0)*(((actual - target) == 0 )*0.001+((actual-target)!=0)*(actual-target))
in the second half we have coded the else part.
in the same way you can proceed for your logic -
Conditions In BEX Query Designer
Hi Users,
I have a scenario to be implemented in my queries.
Scenario 1 -
I have a Characteristic field F1.
I have to create a coloum C1 in report display result which populates the below condition:
If F1 = '12345' then C1 = YES
ELSE it should be blank.
Scenario 2:
I have two date fields D1 and D2 with their corresponding KPI fields DV1 and DV2.
DV1 is for D1 and DV2 is for D2.
First D1 is compared with D2 and whichever is latest date then its corresponding field should be populated and other should not.
Example if D1 is 01.04.2014 and D2 is 22.04.2014 and If DV1 is 100 and DV2 is 200
Then only DV2 should be populated and DV1 should be empty.
Can anyone please suggest?
Regards
SyedTwo things to note before we move to solutions.
You need to convert all the dates(D1 and D2)and characteristic (F1) fields into Keyfigure with the help of formula variable with replacement path which are to be used in if else condition for comparison.
You cannot populate string (YES) at Bex lsevel so instead of that you may use number if that suits your requirement.
Now once you have converted the same then write the condition as below:
Scenario 1 -
I have a Characteristic field F1.
I have to create a coloum C1 in report display result which populates the below condition:
If F1 = '12345' then C1 = YES
ELSE it should be blank.
(FV1==12345)*1+(FV1<>12345)*0
For Scenario 2:
(D1>D2)*DV1+(D1<D2)*DV2
For converting the char into kfs refer the below document:
Convert a Characteristic into a Key Figure (BEx)
Hope this helps.
Regards,
AL -
How to create a variable in Bex Query Designer
Hi guys,
I am writing a query for a travel management report using the SAP Standard cube. I would like to restrict the query so it only shows me the last two months excluding the current month. I have checked BI content in RSA1, but I canu2019t find a relevant SAP standard variable that I can use.
Can anyone please tell me if I can create my own? And if so, how I can do this.
Many Thanks
Forhad.lets say u want to display following picture:
sept$-----august$
City
-chicago123$--
44$
so in Query designer go to Default values section.
Bring in Calendar month
right click calendar month
and hit Restrict
now select variable
use standard sap variable Current Month.
hit okey
now select Variable and hit Red button
Result u restricted current month.
in columns bring in keyfigure $
right click and hit edit
bring in time field calendar month
right click and hit restrict
bring in Current month
right click and select - SET OFFSET FOR VARIABLE
select -1
hit okey
repeat the above process
and this time select offset = -2
this way u restricted current month
but displayed last 2 months for keyfigure values. -
How can i achieve tis in Bex Query Designer
Hi Experts,
Please advise on how can i achieve this in Query.
I got Location,Material_ID,Price and Change_Date.
(Change_Date is defined as both CHAR & KF in cube)
(Change date is on monthly basis they execute a programe in non sap source system to update the prices of material)
The Price of material tends to change or may not change ...
Every month we get a record from source system on material price
My requirment is to bulid a report that show
LocationMaterial_IDCurrent Price and Previous Price
Please advise how can i develop this reportWhile loading into cube, normally you map price field coming from datasaource to
infobject ZPRICE_CURRENT in your infocube.
So in transformation you map like this
price -
> ZPRICE_CURRENT
Now, Maintain another keyfigure in cube ZPRICE_PREVIOUS.
That is not mapped with anything.But is assigned a value in the Start routine
which just runs before, the transformation.
In the start routine write code something like this :
Read current value of price from cube for that Material.
(Select ZPRICE_CURRENT into price_curr from cube where material = DATA-PACKAGE- Material )
if DATA_PACKAGE-price <> price_curr ( if new_price <> old_price)
ZPRICE_PREVIOUS = price_curr. (storign present value of price in the cube )
endif.
Now save the Start routine. When mapping the fields in the transformation
dont map anythign to ZPRICE_PREVIOUS as it is already filled in teh start routine from the above code.Leave it unmapped.
The below mapping is normally maintained without change..
price -
> ZPRICE_CURRENT
If you find this to be useful ..please do the needful (points) -
How to display 0 Percentage in BEx Query Designer
The BEx queries which I'm doing are ported to EP & client views all charts & data in portal only.
I have a small requirement. My client requires to display 0% in the data output.
Sample data is like
Mon/Grade A | B | C | D | E | F " These are headings
April | | | 3 | 5 | 4 | | " These are data I got in BEx
Required O/p
Mon/Grade A | B | C | D | E | F " These are headings
April | 0 | 0 | 3 | 5 | 4 | 0 | " These are data I got in BEx
My current formula is like
> NODIV0( ( TEST1 * 12) %A TEST2 )
What changes must I make so that 0% is displayed in the O/p? Please let me know earliest.
P.S . The values TEST1 and TEST2 are 'Selections', which holds no data for those displaying values.Hi Kavitha,
The problem is I'm viewing the data in Web based BEX & not in BEX Analyser. So only.
> GROUP E GROUP D2 GROUP D1 GROUP C2
>APR 6.0 46.0
>MAY % 14.3 48.0 11.4 16.9
>JUN % 11.6 16.2
As you can see there's no data for the months-grade (Apr-GroupD1 etc).. Now, how to view it in portal with 0s for all the ones with no data? -
How to create Text Variables in BEx Query Designer
How can i create Text Variables in Bex Q.D.
I am able to create characteristic variables
but i can't find option to create text variables.
What's the requirement to create Text variables in Bex Q.D.
When i try to create Text variable for 0calDay.. the variable type is characteristic by Default and disabled.
How can i create text variables related to 0CalDay with which i need to work in Customer Exit.Hi,
You have to create characteristic variable processing by Customer Exit by considering 0CalDay as a Reference Characteristic
After creation of the above variable, you restrict your KF with the above created variable.
Now you can create a Text variable for the description of your KF. This way it works...........
Regards,
Suman -
How to filter hierarchy node in BEX query designer
Dear experts
We are working on FI balance sheet with hierarchy infoobject 0GLACCEXT. Example of our balance sheet is as follow:
Parent Node A = 20
Sub-parent Node A1 = 10
Leaf A11 = 5
Leaf A12 = 5
Parent Node B = 20
Sub-parent Node B1 = 10
Leaf B11 = 5
Leaf B12 = 5
We require only:
Sub-parent Node A1 = 10
Leaf B12 = 5
So I filter those out in BEX restriction; however, after we examine the report in tcode RSRT, "Sub-parent Node A1" is not shown in BEX Report, and the result is as follow:
Parent Node B = 5
Sub-parent Node B1 = 5
Leaf B12 = 5
Are there solutions for us to show merely A1 and B12 ?Hi Chu
Try the following steps.
Initial Output
In this example I will restrict the query for only displaying Node 8603 and leaf 9000
Proceed to restrict the Characteristic. Please be aware of the difference between hierarchy nodes and leaf characteristic values. Also set the Hierarchy display properties to expand up to level 1.
Execute the query again:
Please be aware that users will still be able to expand node 8603 and see the lower level nodes/leaf. In order to restrict users from doing this set up users authorizations.
Regards,
Carlos -
Condition (Defintion) in BEX Query Designer
Hi Experts,
I am trying to define a condition in BEX Query Designer.
I defined my condition and bit confused with Characterstic Assignment
What Happens if is select 9What is the difference)
1) All Characterstic in the Drilldown Independtly
2)Most Detailed Characterstic Along the Rows
3)Most Detailed Characterstic Along Columns and
4)Individual Chars and Chars.Combinations
ThanksHi,
<b>● All Characteristics in the Drilldown Independently</b>
This setting allows you to apply a condition in a general way. Depending on which characteristics you use in the drilldown, you obtain different results.
Note that the characteristics that are already used in an active condition for characteristic combinations are not included.
This option is optimized for ranked list conditions, but can also be used for threshold value conditions with relative values.
<b>●Most Detailed Characteristic Along the Rows or Columns</b>
This option is optimized for threshold value conditions. The condition is applied to the most detailed characteristic of the rows or columns.
Note that this function is not supported when executing the query in the BEx Analyzer. For more information, see Restrictions in the BEx Analyzer.
<b>● Single Characteristics and Characteristic Combinations</b>
This setting allows you to evaluate the condition for characteristics or characteristic combinations defined for specific drilldowns only. You can select any characteristic (of the characteristics used in the query in rows, columns, or in the free characteristics) or a characteristic combination.
○ If you only want to evaluate the condition when a certain characteristic is present in the drilldown, select this characteristic.
○ If you want to evaluate the condition for characteristic combinations, select multiple characteristics.
Source:
help.sap.com
For more information and examples please check the following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/73/702e39074dc93de10000000a114084/frameset.htm
Hope it helps. -
How to add join conditions in ABAP Query.
Hi,
I need a help on "ABAP Query".
How to add join conditions in ABAP Query.
Thanks in advance.
Thanks & Regards,
RamanaHi,
See below code,
*& Report ZRNP_ALV_SO
REPORT zrnp_alv_so MESSAGE-ID z7rnp .
INCLUDE zrnp_include .
*SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-004 .
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln ,
s_auart FOR v_auart ,
s_vkorg FOR v_vkorg ,
s_spart FOR v_spart ,
s_kunnr FOR v_kunnr ,
s_matnr FOR v_matnr .
SELECTION-SCREEN END OF BLOCK blk1 .
*AT SELECTION SCREEN *
AT SELECTION-SCREEN.
SELECT SINGLE vbeln
FROM vbak INTO vbak-vbeln
WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
MESSAGE e202.
ENDIF.
*START OF SELECTION *
START-OF-SELECTION .
PERFORM data_select.
PERFORM t_sort USING i_sort .
PERFORM event_cat USING i_event .
PERFORM fld_cat USING i_fldcat[] .
PERFORM t_layout USING i_layout .
PERFORM fld_cat2 USING i_fldcat2[] .
PERFORM call_alv.
* DATA SELECT *
*& Form DATA_SELECT
* text
* --> p1 text
* <-- p2 text
FORM data_select .
REFRESH: it_vbfa, it_so1, it_del_ful ,it_del1 .
BREAK-POINT.
*SELECT*
*a~vbeln*
*a~auart*
*a~vkorg*
*a~spart*
*a~kunnr*
*b~posnr*
*b~matnr*
*c~maktx*
*b~kwmeng*
*b~vrkme*
*INTO TABLE it_so1 FROM vbak AS a*
*INNER JOIN vbap AS b ON b~vbeln = a~vbeln*
*INNER JOIN makt AS c ON c~matnr = b~matnr*
*AND c~spras = sy-langu*
*WHERE a~vbeln IN s_vbeln .*
IF sy-subrc = 0.
SORT it_so1 BY vbeln.
DELETE ADJACENT DUPLICATES FROM it_so1.
ENDIF.
* COLURING DISPLAY *
DATA: ld_color(1) TYPE c .
* LOOP AT it_so1 INTO wa_so.
* Populate color variable with colour properties
* Char 1 = C (This is a color property)
* Char 2 = 3 (Color codes: 1 - 7)
* Char 3 = Intensified on/off ( 1 or 0 )
* Char 4 = Inverse display on/off ( 1 or 0 )
* i.e. wa_ekko-line_color = 'C410'
* ld_color = ld_color + 1.
* Only 7 colours so need to reset color value
* IF ld_color = 8.
* ld_color = 1.
* ENDIF.
* CONCATENATE 'C' ld_color '10' INTO wa_so-line_color.
** wa_ekko-line_color = 'C410'.
* MODIFY it_so1 FROM wa_so.
* ENDLOOP .
* IF sy-subrc = 0.
IF NOT it_so1[] IS INITIAL.
SELECT vbelv
posnv
vbeln
posnn
vbtyp_n
INTO TABLE it_vbfa
FROM vbfa
FOR ALL ENTRIES IN it_so1
WHERE vbelv = it_so1-vbeln
AND posnn = it_so1-posnr
AND vbtyp_n ='J' .
IF sy-subrc = 0.
SELECT vbeln
posnr
matnr
werks
lgort
charg
lfimg
vrkme
FROM lips INTO TABLE it_del_ful
FOR ALL ENTRIES IN it_vbfa
WHERE vbeln = it_vbfa-vbeln
AND posnr = it_vbfa-posnn.
ENDIF.
ENDIF.
ENDFORM. " DATA_SELECT
**************** EVENT CATALOG ****************************************
*& Form EVENT_CAT
* text
* -->P_I_EVENT text
FORM event_cat USING p_i_event TYPE slis_t_event .
REFRESH p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
* EXPORTING
* I_LIST_TYPE = 0
IMPORTING
et_events = p_i_event
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
READ TABLE p_i_event WITH KEY name = slis_ev_top_of_page INTO t_event.
IF sy-subrc = 0.
MOVE 'TOP_OF_PAGE' TO t_event-form.
MODIFY p_i_event FROM t_event INDEX sy-tabix TRANSPORTING form.
ENDIF.
CLEAR t_event .
ENDFORM. " EVENT_CAT
**********FORM FOR EVENT TOP_OF_PAGE**********************************
FORM top_of_page .
REFRESH i_listheader.
DATA: t_header TYPE slis_listheader.
DATA: v_text(50).
WRITE sy-datum TO v_text.
CLEAR t_header.
t_header-typ = 'S'.
t_header-key = "Date".
t_header-info = v_text.
APPEND t_header TO i_listheader.
CLEAR t_header.
CLEAR v_text.
WRITE: 'SALES ORDER & DELIVERY DETAILS REPORT ' TO v_text .
t_header-typ = 'S'.
t_header-key = 'TITLE'.
t_header-info = v_text.
APPEND t_header TO i_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_listheader.
* I_LOGO = 'ALV_BACKGROUND'.
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
******** FIRST ALV GRID DISPLAY ***************************************
FORM call_alv .
* FORM TO MAKE THE CELL CONTENTS INVISIBLE.
* PERFORM INVISIBLE_CELL_CONTENTS. *
*EXCLUDE-DECLARATION.
CLEAR wa_exclude.
wa_exclude-fcode = '&VEXCEL'.
APPEND wa_exclude TO i_exclude.
*& Form CALL_ALV
* text
* --> p1 text
* <-- p2 text
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND1'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_background_id = 'ALV_BACKGROUND'
is_layout = i_layout
it_fieldcat = i_fldcat[]
it_excluding = i_exclude
it_sort = i_sort
it_events = i_event
TABLES
t_outtab = it_so1
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM. " CALL_ALV
************** FIRST FIELDCATALOG *************************************
*& Form FLD_CAT
* text
* -->P_I_FLDCAT[] text
FORM fld_cat USING p_i_fldcat TYPE slis_t_fieldcat_alv.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m = 'SALES ORDER NO.'.
i_fldcat-col_pos = 1. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-hotspot = 'X'.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'AUART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m = 'SALES DOC. TYPE'.
i_fldcat-col_pos = 2. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VKORG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES ORG.'.
i_fldcat-col_pos = 3. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 12. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'SPART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'DIVISION'.
i_fldcat-col_pos = 4. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'KUNNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SOLD TO PARTY'.
i_fldcat-col_pos = 5. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES DOC. ITEM'.
i_fldcat-col_pos = 6. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 17. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'MATERIAL NO.'.
i_fldcat-col_pos = 7. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'MAKTX'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'DESCRIPTION'.
i_fldcat-col_pos = 8. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'KWMENG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'QUANTITY'.
i_fldcat-col_pos = 9. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 15. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-do_sum = 'X'. " For doing "SUM"
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname = 'IT_SO1'.
i_fldcat-seltext_m = 'SALES UNIT'.
i_fldcat-col_pos = 10. " POSITION OF THE COLUMN.
i_fldcat-outputlen = 10. " SET THE OUTPUT LENGTH.
i_fldcat-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1) = 'C'.
APPEND i_fldcat.
ENDFORM. " FLD_CAT
****************** ALV SORTING ***************************************
*& Form SORT
* text
* -->P_I_SORT text
FORM t_sort USING p_i_sort TYPE slis_t_sortinfo_alv .
DATA: i_sort TYPE slis_sortinfo_alv .
REFRESH p_i_sort .
CLEAR i_sort.
i_sort-spos = 1.
i_sort-tabname = 'IT_SO1'.
i_sort-fieldname = 'VBELN'.
i_sort-up = 'X'.
i_sort-subtot = 'X'.
i_sort-group = '*'.
APPEND i_sort TO p_i_sort.
ENDFORM. " SORT
*FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
* SET PF-STATUS 'ZSTANDARD'.
*ENDFORM. "Set_pf_status
***********FORM FOR EVENT USER_COMMAND1********************************
FORM user_command1 USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
*CASE R_UCOMM .
* WHEN '&IC1' .
* IF rs_selfield-FIELDNAME = 'VBELN' .
* ENDIF .
* WHEN OTHERS .
* ENDCASE .
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
IF sy-subrc = 0.
LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
AND posnv = wa_so-posnr.
READ TABLE it_del_ful INTO wa_it_del_ful
WITH KEY vbeln = wa_vbfa-vbelv
posnr = wa_vbfa-posnn.
IF sy-subrc = 0.
CLEAR wa_del.
MOVE wa_it_del_ful TO wa_del.
APPEND wa_del TO it_del1.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
********* SECOND ALV GRID DISPLAY ***********************************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND2'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_background_id = 'ALV_BACKGROUND'
it_fieldcat = i_fldcat2[]
it_sort = i_sort
TABLES
t_outtab = it_del_ful
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM . "USER_COMMAND1
********** FORM FOR EVENT USER_COMMAND 2 ******************************
FORM user_command2 USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
* IF SY-SUBRC = 0.
* LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = WA_SO-vbeln
* AND posnv = WA_SO-posnr.
READ TABLE it_del_ful INTO wa_it_del_ful
WITH KEY vbeln = rs_selfield-value
" vbeln = wa_vbfa-vbeln
posnr = wa_vbfa-posnn.
IF rs_selfield-fieldname = 'VBELN'.
SET PARAMETER ID 'VL' FIELD wa_vbfa-vbeln .
CALL TRANSACTION 'VL03' AND SKIP FIRST SCREEN.
ENDIF .
* ENDLOOP.
* ENDIF.
ENDIF.
ENDFORM . "USER_COMMAND2
********* SECOND FIELDCATALOG ******************************************
*& Form FLD_CAT2
* text
* -->P_I_FLDCAT2[] text
FORM fld_cat2 USING p_i_fldcat2 TYPE slis_t_fieldcat_alv .
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-tabname = 'IT_DEL_FUL'."TABLE NAME
i_fldcat2-seltext_m = 'DELIVERY NO.'.
i_fldcat2-col_pos = 1. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-hotspot = 'X'.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'DELIVERY ITEM'.
i_fldcat2-col_pos = 2. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'MATERIAL NO.'.
i_fldcat2-col_pos = 3. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'WERKS'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'PLANT.'.
i_fldcat2-col_pos = 4. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'LGORT'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'ST. LOCATION'.
i_fldcat2-col_pos = 5. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'CHARG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'BATCH NO.'.
i_fldcat2-col_pos = 6. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'LFIMG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'ACT. DEL. QTY.'.
i_fldcat2-col_pos = 7. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m = 'SALES UNIT.'.
i_fldcat2-col_pos = 8. " POSITION OF THE COLUMN.
i_fldcat2-outputlen = 20. " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize = 'X'. " COLOR OF THIS COLUMN.
i_fldcat2-key = 'X'. " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1) = 'C'.
APPEND i_fldcat2.
ENDFORM. " FLD_CAT2
***************** ALV LAYOUT *******************************************
*& Form LAYOUT
* text
* -->P_I_LAYOUT text
FORM t_layout USING p_i_layout TYPE slis_layout_alv .
p_i_layout-zebra = 'X'.
p_i_layout-totals_text = 'GRAND TOTAL ='.
* p_i_layout-CONFIRMATION_PROMPT = 'X'.
* p_i_layout-DEF_STATUS = ' '.
p_i_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " LAYOUT -
IF and ABS condition statement in BEX query designer
Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
ArnoldHi Arnold,
Thank you,
Nanda -
Where to write IF THEN ELASE statements in BEX Query Designer
Hi All,
I need to write a formula in query designer...
saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
where can i write this logic to perform calculation ...
Thanks in advance..
ravi.phi chetan,
No its not work.. why because i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there any solution to solve this Problem... -
How to work with sap bw bex query structure
Dear Friends,
How can we use SAP BW bex query structure in crystal reports.
Thanks with regards.
Maliki have two structure in my query.
and structure is comming in my Crystal report.
i have 10 memebers in that structure and i make display off for some of members .
but in crystal all of members are comming either its property is hidden or not.
any help higly appricated.
Regards
Malik
Maybe you are looking for
-
I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the p
-
Hi, We are working on SRM 4.0. when the user is trying to create a shopping cart from catalog he gets the error message as "you don't have the acces to the cost object xyz12.please return to the cost assignment section and correct". We have given the
-
How to run command line tool in my program???
Hi,all,I've got some tools that are usually,or take JDK for example,if we are not using an IDE,we need to open the command prompt,and then use the javac command to compile the source files and the "java "command to run the program,and both of them ac
-
MIRO - Parked document - Accounting document
Dear all, When parking document with transaction MIRO, I would like that no accounting document is created, just logistic one. (up to now my research show that when it happens it is likely an error). Do you think it's possible (user-exit, Badis, ...)
-
Warning Illegal Angle - Back to iDVD
Just upgraded from FCP3 to Studio 2 and tried to use DVD Studio Pro for the first time this morning and failed miserably. I created a 52 minute video yesterday in FCP then exported to Compressor. It was a simple video with NO audio (soccer scrimmage)