How To Write A Novel On ibook's Author?

I need help I am trying to write a book but i dont know how to do it with all the text book templetes! help please

Without more about your specific goals...it's hard to say. How many images, any media, etc.
Perhaps pick from 'Basic', 'Contemporary' and 'Classic' with just a sample of your content and then choose.
If it is just text (and that's ok), you may be better of not even using iBooks Author and simply working in Pages, exporting to epub when done.

Similar Messages

I Want to make an app.. but i dont know how to write code or use Xcode... where I can begin?

Hey!
I just graduate from high school.. im gonna study Computer Enginnering. Im working for my family and they need an app that works like iBook. We have the eBooks and then they want me to do an app where they can sell the eBooks and read them. I have Xcode, but I dont know how to write codes or where to begin in all of this. I want to make the app first for iPad but if it can be for both iPad and iPhone better. I just want recommendation and help. Please and Thanks!!

hello i hope your having a good day but can you reply to me if you got the codes to make an app because i want to make an app too thanks

Does anyone know how to convert a novel manuscript, written in Pages, to an Amazon e-book and CreateSpace document?

Does anyone know how to convert a novel manuscript, written in Pages, to an Amazon e-book and CreateSpace document? Do I need to purchase Word for my iBook?

Susan,
You need to create a pdf file of the document to print using CreateSpace. Check their size requirements and set up your document to fit those, make sure your cover has the correct bleed if the cover image goes "off the edge", and work your way through the guided system on CreateSpace. If you know someone who has done a book there, they might be able to help you, too. I will be doing a book from an author who used Pages soon, too, and though I use InDesign, he does not. I don't anticipate any problems with it, as a pdf is a file structure with which CreateSpace is familiar.
You can also use their more tutorial-like set-up, too, perhaps, at least the first time through the process. I typically help first-time users through the process when I've helped create their books, too. It's mostly straight-forward, minus the upload problem I'm currently dealing with with my computer, of course!

How to write numbers in Arabic?

Hi All,
How to write numbers in arabic?
(how will you in normal papers....assume 123 to be in the arabic numerals here).
Should it be:
| -123|
(or)
| 123-|
Thanks,
Jana

Try the following.
DecimalFormat formatter_ar=null;
Numberformat form = NumberFormat.getNumberInstance(new Locale("ar","EG"));
if(form instanceof DecimalFormat) formatter_ar = (DecimalFormat)form;
String str = formatter_ar.format(-123.45);
System.out.println(str);

How to write a start routine in the trasnformations ?

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

Hi,
            Yopu can write the below lines of code adn try
    SORT source_package BY Receive nr Type ASCENDING.
    DELETE ADJACENT DUPLICATES FROM source_package COMPARING Receive nr Type.
But you should make sure which record of the either rows need to deleted
i.e in
F9001;LU;J001;662;
F9001;LU;J002;662
You need to decide to eliminate 1st or 2nd one.(depends on your requirement)

How to write the start routine in the transformations ?

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

How to write a pgm to change the existing encrypted password

Hi all,
can anybody tell me how to write a pgm to change the existing encrypted password.
thanks in advance.

Well, it's going to depend on how it's implemented in the current system.
But basically it's going to look a lot like the current login actions. Presumably you have something that takes the user ID and password, encrypts the password, looks up the encrypted password in the database matching that user ID, and compares them. This functionality would also take a new password (preferably twice so they can be checked for consistency), and if the existing encrypted passwords match, it will encrypt the new password and put it in the database where the old one was.
And if the application has a mechanism for new users to sign up, it'll look a lot like this as well.
But I'm just guessing. This is all going to depend on how the existing functionality is written. Probably the best thing you can do is talk to a programmer at your organization who has worked on the application, and ask them for help.
Hope this helps anyway.

How to write a sql query to retrieve data entered in the past 2 weeks

Hi,
I have file names and last accessed date(java.sql.Date format) stored in my database table, I would like to know how I can write a query to get the name of files accessed in the past 2 weeks,I use open sql server at the back end.
Thanks in advance.

This has essentially nothing to do with JDBC. JDBC is just an API to execute the SQL language using Java and thus interact with the databases.
Your problem is related to the SQL language, you don't know how to write the SQL language. I suggest you to go through a SQL tutorial (there is one at w3schools.com) and to read the SQL documentation which come along with the database in question. A decent database manfacturer has a website and probably also a discussion forum / mailinglist as well.
I'll give you a hint: you can just use equality operators in SQL like everywhere. For example: "WHERE date < somedate".

How to write a SQL query in SAP B1 2007 B with input parameters?

How to write a SQL query in SAP B1 2007 B with input parameters, on execution of which will ask for some input value from the user and the values will be selected from a list such as item list?

The syntax like
SELECT * FROM OITM T0 WHERE T0.ItemCode = '[%0\]'
Thanks,
Gordon

Help! need "How To" for a feature of iBooks on iPad using iTunes

On the bottom of the iBooks main screen there is "Bookshelf", "Titles", "Authors", "Categories" buttons. Pressing any one will sort books by that tab.
In iTunes, the same Column headers can come up when you select them under "View Options".
So far, so good.
My problem is that I am tossing in about 200 .pdfs and they all go in by "Title" only. I can't find anyplace to edit the "Authors", "Categories", etc.
When you go into "Get Info" for a book in iTunes, you only get options such as
"Artist", "Album Artist", "Album", etc., Your normal music/video categories. Nothing book related. Why have data fields if you can't access them?
Do these only get filled when you purchase a book from the Apple store?
Hello Apple - Where are my book related options? and yes, I have selected "Book" under "Media Kind".
Can anyone tell me how I can fill in the Category or Author field for books when in iTunes?

The only field that works so far is that under "info", "Artist" corresponds to "Author".
How about "Category"?

How do I rename the PDF (both Title & Author) in new ibooks for Mavericks?

Hi!
I can't seem to amend both Title and Author for my PDFs in the new ibooks App in Mavericks.
(Opening it in Preview and renaming it does not change the Author name FYI)
The current solutions present are for 2013 and there is none for the new app in Mavericks.
My obsessiveness does not allow me to list my books in such haphard fashion.
Any kind souls able to help?
Thank you!

LOL! As you've explained it, the reason this community is called iBook for Macs is because you can easily change PDF titles on a Mac…
I know that people like to be gatekeepers--and I know that people can post in the wrong places--but that's not what happened here. I was correcting the previous comment about iBooks on the iPads! (See earlier post above.)
"iBooks.app on iPads or Maversick is a "viewing" app ie it allows you to open books etc,. on the device its used on. Its "read only" in computing terms.. you cannot change anything."
I wanted to do it by not directly pointing out the person's error, but you've forced my hand!
By the way, I ended up at this thread inadvertently while looking for how to change book titles in iBooks under iOS. So, in case anyone else ends up here looking for how to change PDF titles on their iPads, they'll know it can be done and how!
Happy Labor Day, everyone!

How to write the expression when create the calculated column?

Dear,
I want to create some calculated column in my attribute view, but I don't know how to write the code in the expression, is there any introduction about this part, how to use those function and how about the grammar in this expression code ? or is there any example about this calculated column?
Thanks for your sincerely answer.

Hi Zongjie,
you can find some information about the creation of calculated columns in the HANA Modeling Guide (http://help.sap.com/hana/SAP_HANA_Modeling_Guide_for_SAP_HANA_Studio_en.pdf).
Within chapter 6.2.1 (Create Analytic Views) you can see under point 7 some basics and also a simple example. The same is also valid for Calculation Views.
Chapter 8.9 (Using Functions in Expressions) describes the different available functions.
You also can use the integrated search in the HANA Studio by clicking the "?" button in the button left corner. Then you get some links in the side panel with related information.
In general you can write your expression manually or you can just drag and drop the functions, elements, operators into the editor window. For example if you drag and drop the "if" function into the editor window you get "if(intarg,arg2,arg3)" inserted. The arguments can be replaced manually or also by drag and drop.
It is also worse to use the "Validate Syntax" button on top of the editor window. It gives you directly a feedback if your expression syntax is correct. If not you get some helpful information about the problem (ok, sometimes it is a little bit confusing because of the cryptic error message format ).
Best Regards,
Florian

How to write to a log file within a JSP

Hello everybody,
do you know how to write to a log file within a JSP.
my code is (/space/SP/tlf/ExcepcionJava.jsp):
<html>
<body bgColor=#C4E1FF>
<%@ page import="java.io.*" %>
<%
     FileWriter salida = new FileWriter(response.encodeURL("log.txt"));
     salida.write(request.getParameter("errorMsg"));
     salida.close();
%>
</body>
</html>.. I run under Solaris, Jrun 2.3.3
I have also test with getServletContext().getRealPath(), but I get /netsrv/nes/docs/ instead of /space/SP/tlf/

Hi,
Give the full path of the log file to the FileWriter. Such as;
FileWriter salida = new FileWriter(response.encodeURL("/usr/local/tomcat/logs/testlogs/log.txt"));
nurettin

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

How to write a procedure to load the data into a table using xml file as input to the procedure?

Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.

here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode                                                                            ddesc                                                                            reauthflag
0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
0                                                                                (J04)Acute laryngitis and tracheitis                                             0
0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3    insert into MyXmlTable
4      select *
5        from xmltable('//Entity' passing xmltype(x) columns "dcode"
6                      varchar2(4000) path '/Entity/dcode',
7                      "ddesc" varchar2(4000) path '/Entity/ddesc',
8                      "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9    commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode                                                                            ddesc                                                                            reauthflag
0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
0                                                                                (J04)Acute laryngitis and tracheitis                                             0
0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
SQL>
SQL>
Ramin Hashimzade

How To Write A Novel On ibook's Author?

Similar Messages

Maybe you are looking for