How to write Article on SDN?
I want to write one article in SD, but am not able to find how to do it.
Thanks,
Sharayu
Well i guess the article won't be about using the search function, will it?
Anyway have a look at this How to Submit a Article?
Cheers Michael
Similar Messages
-
How to contribute ARTICLE in SDN
Hello Guru's
m new to SDN Forum and wanted to contribu Article in SDN Forum.
i have heard that
1) we have to download some Templates
2) and after creating Articles
3) submit it to SAP People so that they can approve it
Now my concern is that from wheare i can download thease TEMPLATES??
and how to sbmit it to SAP Guy's??
thanks and regards
Soni VinitHi Vinit,
First of all read this page:
[How to Contribute|https://www.sdn.sap.com/irj/sdn/submitcontent]
You can download the template using this link:
[SDN/BPX contributor template|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b038b4fd-80aa-2a10-56b4-87862382e3ab]
And for submission of your article, you have to go to this link:
[Content Submission System|https://www.sdn.sap.com/irj/sdn/contentsubmission]
If you have any other query, do let me know.
Bye
Ankur -
Hi,
How to post an article in SDN..can any one let me know. I want to post one article which is a step by step guide for handling outbound IDOC errors through workflow and sending notification to outlook mail box.
Regards,
KrishnakumarHi,
I think you wish to know the procedures for how to post a message in SDN
Surely this link helps you a lot.
https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement .
Regards,
SHARMILA BRINDHA.M -
How to write log information into SM37 batch job log
Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
BenHi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben -
How to write a log using abap mapping
Hi all.
in PI 7.1 environment I need to use abap mapping and I wish to write some XML data into a table that I created for logging the data.
I know that using the abap mapping I can parse an XML file. My question is how to write this table defining a specific method, if it is necessary.
Any help or suggestion is well appreciated.
Many thanks in advance for your kind cooperation.
Regards,
Giovannihi,
>> My question is how to write this table defining a specific method, if it is necessary.
just like to normal table (insert statement)
parse XML and get the data you need and just insert into the DB table
there are many tutorials showing how to parse xml file inside abap mapping
so just do a little search on sdn
Regards,
Michal Krawczyk -
How to write won WSDL file for SOAP adapter ?
Hi experts
Can any one expalin me how to write WSDL file for SOAP adapter ?
What and all things i need to know ? i have no idea on this....
I got the business but to WSDL ...i am very new to this
Adv...thanks
RakeshHI,
Please see the below links,
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0d7349b6-0901-0010-ddbe-ec43178a61ff
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
/people/kevin.liu/blog/2006/04/12/wsdl-11-binding-extension-for-soap-12
Regards
Chilla.. -
How to write a application using WDJ with the adobe form ?
Hi, experts,
I don't know how to write a application using !!webdynpro for java!! with the adobe form so that I can fill data to the adobe form and get data from the adobe form.
Note: I have configed the ADS(adobe document services),and I can create a application with a interactiveform in webdynpro for abap and run it successfully, so that I can fill data to the adobe form and get data from the adobe form.
Do you give me some hint?
Thanks a lot.
Best regards,
tao
Edited by: wang tao on Sep 9, 2008 8:59 AMHi,
Refers the following links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4fd2d690-0201-0010-de83-b4fa0c93e1a9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c9a954-aa20-2a10-64bb-ea0835204e03
Thanks
Abhilasha. -
Hi,
May i know how to write my application messages into system log(sm21)
using "c_write_syslog_entry". Any explanation regarding the Type. ID, Data
will be useful with examples. Incase of any other FM's or C functions does
the same Please let me know.
Thanks
PrasathHello Prasanth
I agree with Kareem that you should prefer the application log. If interface IF_RECA_MESSAGE_LIST is available on your SAP system this is the first choice for collecting messages AND storing them as application log.
For an example you may have a look at my Wiki posting [Message Handling - Finding the Needle in the Haystack|https://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
Not shown in this example is the storage of the application log. However, if you look at method CF_RECA_MESSAGE_LIST=>CREATE you see that you can add the application log references here.
Regards
Uwe -
Can you plz tell m how to write Design Strategy in the scenario IDoc-- File
Hi,
can any body plz tell me how to write Design strategy, Preprocessing logic and post processing logic in the scenario IDoc-->File.
My idoc is:
Message Type: ZMMIPORDCHG
Basic Type : ORDERS05.
lookup's are available.Hi,
take a look at this document for an IDOC to IDOC Scenario,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Use it as a template to design one side of the Interface and also take a look at this blog,
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards,
Bhavesh -
Hi all,
Can you please explain me how to write a query joining tables in SAP ?
Thanks,
Avani.Hi
Check info from sdn only
User T-code: SQVI
Enter your "query name" and press"create"
Enter title
In Data source " select Table join"
select basis mode and press continue.
Press Insert table and give the tabes one by one.
Drag the parameter and drop in another table to establish link and link all the tables.
Press check to check whether your link is correct, then press back
You will be able to see the tables and fields on left hand side.
Select the appropriate parameters for selection fields and list fields
Selection fields- For selection of data, the initial screen of report.
List fields are nothing but output.
Execute the report.
You will find the initial screen of report.
Give your parameters for output and execute again.
You will receive the desired output.
You can down load the output in spread sheet/ in the format desired.
At last save your query before coming out of transaction
Vishal... -
How to write a code for cumulative values..
Hi
Can any one proivde the Sudo code for Customer exit at Reports.
I need to write a code for when ever user input Calaender month then querry calucalate the cumulative values also.
How to write a code for cumulative values..
Example:
Customer -Sales.Quantity(CalMonth)--- Sales.quantity(Cumulative Month)
1000--223--
2200
Regards
mannev.hi mannev,
to get an idea, search in SDN
for example
customer exit code
with hopes,
Raja Singh -
How to write Validations for Sample Data??
Hi Frnds,
I want to know how to write validations for sample oracle data?? Can anyone explain anyone clearly??
Regards,
RajHi shushma,
Simply put a check that:
If(wdContext.current<YOUR_NODE>Element().get<YOUR_ATTRIBUTE_NAME> !=null){
else{
// Show the error messages
//Displaying the error message is very easy.
//You can report exception using the message manager API's. You will get this easily on SDN.
I hope this helps! if you need ay further help please let me know.
Thanks and Regards,
Pravesh -
How to write Validations for RadioButton
Hi All,
in my Application , two RadioButtons and one submitbutton is there, in that
1. yes
2. no
both are radio buttons
when i click on submit button, without selecting any one of those radiobuttons ,
it shud display error message, this errormessage i have written in iwdmessage.
it shud show this error message, instead of displaying nullpointer exception.
how to write validation for this.
please help me.
regards
sushHi shushma,
Simply put a check that:
If(wdContext.current<YOUR_NODE>Element().get<YOUR_ATTRIBUTE_NAME> !=null){
else{
// Show the error messages
//Displaying the error message is very easy.
//You can report exception using the message manager API's. You will get this easily on SDN.
I hope this helps! if you need ay further help please let me know.
Thanks and Regards,
Pravesh -
Does anyone know how to write on a NTFS drive?
Re: question???
How to write to a NTFS drive??
Maybe native support???I got this working just yesterday. Read this link for instructions:
http://www.offthehill.org/articles/2010/12/31/macfuse-for-64-bit-snow-leopard/
Install tuxera's MacFUSE binary from here: http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg
Once you plug in your USB drive or an NTFS drive, the system will mount it read-only by default. You will need to "umount" it (as root, of course) and re-mount it with read-write permissions and a "noowners" option (I assume you're familiar with Unix commands and their options). I tried this today and it works, I can read/write to the NTFS drive on 64-bit snow leopard. -
How to write adapter module to convert the xml to pdf file
Hi all,
how to write adapter module to convert the xml to pdf file.
Please any body assist step by step procedure.PI 7.1 XML to PDF transformation
have you seen below links:
http://forums.sdn.sap.com/thread.jspa?threadID=1212478
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14363
Maybe you are looking for
-
Please help me.... My monitor language is stuck on Japanese?? I want it on ENGLISH. CAN YOU HELP ME??? This is a LENOVO L192 I need it to list the contrast and brightness and the rest of the stuff in English. Solved! Go to Solution.
-
Error of compilation for an IOS project: Exception in thread "main" java.lang.OutOfMemoryError: GC overhead limit exceeded at adobe.abc.Algorithms$SetMap.get(Algorithms.java:226) at adobe.abc.Algorithms$ExprWorkQueue.add(Algorithms.java:491) at adobe
-
Mac Mail 5.2 OSX 10.7.4 - remove underline on sig link
I will apologize in advance if this is me having a friday brain melt! I am trying to add a link within my signature to the following "register for webinars here" and but I don't want the wording underlined - cannot fathom how to remove the underline,
-
How to respond email to several contacts
I have two email accounts asociated with my iphone 4, so when a had a blackberry and somebody send me an e mail with cc to another contacts i had the option to response the e mail to the especific contac and the other ones. haw can i do it from my ip
-
How to define document protocol for Custom/Generic message of ASCII types
We need define for B2B document protocol for Custom over Generic message type to receive/process ASCII message (either fixed or indefinite length) from Trading Partner, can anybody tell us if you have done it with detailed example and instruction: 1)