How to write GUI for J2ME?

Does anybody know how to write GUI for J2ME?
is there any reference books, web sites, etc?
Thank you!

Thank you!
i will take a look.

Similar Messages

  • Does anybody know how to write GUI for J2ME?

    Does anybody know how to write GUI for J2ME?
    Thanks!

    Hi..! I don't know exactly... it's a good question. I refered something. U visit below URL's.
    http://www.java-pro.com/upload/free/features/javapro/2000/13iss00/rg0013/rg0013.asp
    http://developer.java.sun.com/developer/technicalArticles/wireless/midpui/

  • HR ABAP How to Write BDC For Infotype 0586

    Hi Experts
    Can Any One tell me how to write BDC for Infotype 0586  and also 585.
    If we enter into the maintaining Screen, the lines in the Screen will dynamically changing depending on the values.
    When I am doing recording , If I press page down after entering values in top lines, the lines are changing and the records are not updating Correctly.
    I need to write BDC to Create Change.
    Can any one please help me in this regard?
    Thanks in Advance.
    Regards
    Avinash.

    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    http://www.google.co.in/search?hl=en&q=SAPBDCtable+control&meta=
    http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    http://www.sap-img.com/abap/question-about-bdc-program.htm

  • How to enable GUI for a Cisco 1841?

    How to enable GUI for a Cisco 1841?

    Hi,
    install SDM or CCP on your PC then on the router :
    en
    conf t
    ip dhcp excluded-address 192.168.1.254
    ip dhcp pool MYPOOL
    network 192.168.1.0 255.255.255.0
    default-router 192.168.1.254
    ip http server
    ip http authentication local
    username xxx privilege 15 secret   xxxx
    int f0/0
    ip address 192.168.1.254 255.255.255.0
    no shutdown
    Regards.
    Alain.

  • How to write comments for a class

    hi
    how to write comments for a class

    I'm reeling with incredulity, and as such am unable to do anything except just post some code
    // this is a single line comment
    /* this is a multiline comment.
        it can be spread over as many lines as you
        want */Or are you asking about how to decide what the content should be?

  • How to write code for page up and page down buttons on alv screen?

    Hi,
    Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n)  these are enabled and working properly, but we can't debug this with /h
    How to write code for page up and page down buttons on alv screen?

    Poonam,
    On doing the screen debugging it took me over to    Include LSTXWFCC ,kindly check the below code.
    module cc_display.
      fcode = sy-ucomm(4).
      case sy-ucomm(4).
        when 'P--'.
          perform cc_firstpage.
        when 'P-'.
          perform cc_prevpage.
        when 'P+'.
          perform cc_nextpage.
        when 'P++'.
          perform cc_lastpage.
        when 'EX--'.
          perform cc_firstcopy.
        when 'EX-'.
          perform cc_prevcopy.
        when 'EX+'.
          perform cc_nextcopy.
        when 'EX++'.
          perform cc_lastcopy.
    I guess it can give you some lead.
    K.Kiran.

  • How to write program for handling  script ?

    In script i have 2 pages.
    In first page i have constant windows and variable windows.
    In second page i have main window.
    How to write program for this?

    Hi
    You need to write a driver program. You need to use open form, then write_form to write data into various windows and then close_form to close.
    As you don't want main window in the first page first try out just by having the window in the second page; i guess system will take care of it. As all other windows filled and if u start writing data in the main it'll go for next page.
    If doesn't work have the window on the first page with the least hight and write a command
    IF &SYST-PAGE& EQ 1
        NEXT-PAGE.
    ENDIF.
    Then in the second page you can have the main window hight as per your requirement.
    Here is an example
    (1) Get customer data
      TABLES: scustom, sbook, spfli.
      DATA: bookings like sbook...
      select * from...
    (2) Open form
      CALL FUNCTION 'OPEN_FORM'
        EXPORTING
          DEVICE = 'PRINTER'
          FORM = 'S_EXAMPLE_1'
          DIALOG = 'X'
        EXCEPTIONS
          others = 1
    (3) Print table heading
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          ELEMENT = 'HEADING'
          TYPE = 'TOP'
          WINDOW = 'MAIN'
          FUNCTION = 'SET'
    (4) Print customer bookings
      LOOP AT bookings WHERE
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            ELEMENT = 'BOOKING'
            TYPE = 'BODY'
            WINDOW = 'MAIN'
      ENDLOOP
    (5) Close form
      CALL FUNCTION 'CLOSE_FORM'
    Regards
    Surya.

  • How to write Validations for Sample Data??

    Hi Frnds,
    I want to know how to write validations  for sample oracle data?? Can anyone explain anyone clearly??
    Regards,
    Raj

    Hi shushma,
    Simply put a check that:
    If(wdContext.current<YOUR_NODE>Element().get<YOUR_ATTRIBUTE_NAME> !=null){
    else{
    // Show the error messages
    //Displaying the error message is very easy.
    //You can report exception using the message manager API's. You will get this easily on SDN.
    I hope this helps! if you need ay further help please let me know.
    Thanks and Regards,
    Pravesh

  • How to write BDC for tcode F-32

    Hi Experts,
    How to write BDC for tcode F-32 .
    is it possible i recorded in SHDB BUT IF I AM DOING IT'S COMING WRONG .
    plz guide me sir.
    regars,
    Hari
    Edited by: hari311 on Oct 27, 2009 9:22 AM

    There might be that when u provide the data in the selction screen of F-32 and press process open items some custom program might be attached to it and gets executed...
    chek it out..
    if so..
    pass the bdcdata of the second screen into a memory id
    export t_bdcdata into v_memid.
    in that custoom report jus import this..
    then fill the t_bdcdata with the header information and call the transcation f-32..
    Edited by: imran khan on Oct 27, 2009 9:35 AM

  • How to write API for web cam?

    who knows how to write API for web cam?

    if you mean capture from the cam try JMF I've done it a million times
    salut

  • How to write BDC for KP06

    Hi,
    How to write BDC, for Tcode KP06, How to handle the table control in that Tcode.
    or any other way to upload data for this Tcode.
    Regards
    Manohar

    Hi,
    check the sample code for transaction ME51 and ME21.
    PARAMETERS:
      p_fname TYPE ibipparms-path.
    *" Data declarations...................................................
    Work variables                                                      *
    DATA:
      fs_bdc TYPE bdcdata,
      fs_msg TYPE bdcmsgcoll.
    Internal table to hold bdc data                                     *
    DATA:
         t_bdc LIKE
      STANDARD TABLE
            OF fs_bdc.
    Internal table to hold bdcmessage data                              *
    DATA:
         t_msg LIKE
      STANDARD TABLE
            OF fs_msg.
    DATA:
      w_string(50)  TYPE c,
      w_string1(19) TYPE c,
      w_message(72) TYPE c,
      w_num         TYPE i VALUE 1,
      w_num1        TYPE i.
    *" Type declarations...................................................
    Type declaration of the structure to hold  header data              *
    DATA:
      BEGIN OF t_header  OCCURS 0,
        ftype      TYPE c,
        doctype(10) TYPE c,
        acctcat(4) TYPE c,
        date(10)    TYPE c,
        plant(4)   TYPE n,
        text(10)   TYPE c,
        qty(5)     TYPE n,
        units(5)   TYPE c,
        pgrp(3)    TYPE n,
        mgrp(3)    TYPE n,
        price(2)   TYPE n,
       gacct(6)   TYPE n,
        cost(4)    TYPE n,
      END OF t_header.
                          START-OF-SELECTION EVENT                      *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
      CALL FUNCTION 'F4_FILENAME'
       EXPORTING
         program_name        = syst-cprog
      DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
       IMPORTING
         file_name           = p_fname
    START-OF-SELECTION.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                      = 'c:\temp\item2.txt'
      FILETYPE                      = 'ASC'
         has_field_separator           = 'X'
        TABLES
          data_tab                      = t_header
       EXCEPTIONS
         file_open_error               = 1
         file_read_error               = 2
         no_batch                      = 3
         gui_refuse_filetransfer       = 4
         invalid_type                  = 5
         no_authority                  = 6
         unknown_error                 = 7
         bad_data_format               = 8
         header_not_allowed            = 9
         separator_not_allowed         = 10
         header_too_long               = 11
         unknown_dp_error              = 12
         access_denied                 = 13
         dp_out_of_memory              = 14
         disk_full                     = 15
         dp_timeout                    = 16
         OTHERS                        = 17
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.                                 " IF SY-SUBRC <> 0
      LOOP AT t_header WHERE ftype = 'H'..
        CLEAR fs_msg.
        IF t_header-ftype = 'H'.
          PERFORM bdc_program USING 'SAPMM06B' '0100'.
          PERFORM bdc_field   USING 'eban-BSART' t_header-doctype.
          PERFORM bdc_field   USING 'eban-KNTTP' t_header-acctcat.
          PERFORM bdc_field   USING 'RM06B-EEIND' t_header-date.
          PERFORM bdc_field   USING 'eban-WERKS' t_header-plant.
          PERFORM bdc_field   USING 'BDC_OKCODE' 'AB'.
        ENDIF.
       IF t_header-ftype = 'I'.
        LOOP AT t_header WHERE ftype = 'I'.
          PERFORM bdc_program USING 'SAPMM06B' '0106'.
          w_string = 'EBAN-TXZ01(01)'.
          w_string+12(1) = w_num.
          PERFORM bdc_field   USING w_string t_header-text.
          w_string = 'EBAN-MENGE(01)'.
          w_string+12(1) = w_num.
          PERFORM bdc_field   USING w_string t_header-qty.
          w_string = 'EBAN-MEINS(01)'.
          w_string+12(1) = w_num.
          PERFORM bdc_field   USING w_string t_header-units.
          w_string = 'EBAN-EKGRP(01)'.
          w_string+12(1) = w_num.
          PERFORM bdc_field   USING w_string t_header-pgrp.
          w_string = 'EBAN-MATKL(01)'.
          w_string+12(1) = w_num.
          PERFORM bdc_field   USING w_string t_header-mgrp.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=KN'.
          w_num = w_num + 1.
          PERFORM bdc_program USING 'SAPMM06B' '0102'.
          PERFORM bdc_field   USING 'EBAN-preis' t_header-price.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=KN'.
          PERFORM bdc_program USING 'SAPMM06B' '0505'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=KWE'.
          PERFORM bdc_program USING 'SAPlkacb' '0002'.
       PERFORM bdc_field   USING 'EBAN-sakto' t_header-gacct.
          PERFORM bdc_field   USING 'cobl-kostl' t_header-cost.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=ENTE'.
         PERFORM bdc_program USING 'SAPMM06B' '0102'.
         PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
             ENDIF.
        ENDLOOP.
      ENDLOOP.
      PERFORM bdc_program USING 'SAPMM06B' '0106'.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'BU'.
         PERFORM BDC_PROGRAM USING 'SAPMM06E' '100'.
    *PERFORM BDC_FIELD USING 'BDC_OKCODE' 'BACK'.
      CALL TRANSACTION 'ME51' USING t_bdc MODE 'N' MESSAGES INTO t_msg.
      LOOP AT t_msg INTO fs_msg.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = fs_msg-msgid
            lang      = sy-langu
            no        = fs_msg-msgnr
            v1        = fs_msg-msgv1
            v2        = fs_msg-msgv2
            v3        = fs_msg-msgv3
            v4        = fs_msg-msgv4
          IMPORTING
            msg       = w_message
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
           WRITE:
             / w_message.
      ENDLOOP.
      CLEAR t_bdc[].
      PERFORM bdc_program USING 'SAPMM06E' '0100'.
      PERFORM bdc_field   USING 'EKKO-LIFNR' '1000'.
      PERFORM bdc_field   USING 'EKKO-EKORG' '1000'.
      PERFORM bdc_field   USING 'EKKO-EKGRP' '100'.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'BS'.
      PERFORM bdc_program USING 'SAPMM06E' '0501'.
      PERFORM bdc_field   USING 'EKET-BANFN' fs_msg-msgv1.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=KOPF'.
      PERFORM bdc_program USING 'SAPMM06E' '0125'.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'MALL'.
      PERFORM bdc_program USING 'SAPMM06E' '0125'.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'REFH'.
      PERFORM bdc_program USING 'SAPMM06E' '0504'.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=ENTE'.
      PERFORM bdc_program USING 'SAPMM06E' '0111'.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=NEXP'.
    *perform bdc_program using 'SAPLSPO1' '0300'.
    *PERFORM BDC_FIELD   USING 'BDC_OKCODE' 'YES'.
      PERFORM bdc_program USING 'SAPMM06E' '0504'.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=ENTE'.
      PERFORM bdc_program USING 'SAPMM06E' '0111'.
      PERFORM bdc_field   USING 'BDC_OKCODE' '=NEXP'.
    *perform bdc_program using 'SAPMM06E' '0504'.
    *PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=ENTE'.
    *perform bdc_program using 'SAPMM06E' '0111'.
    *PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=NEXP'.
    perform bdc_program using 'SAPMM06E' '0504'.
    *PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=ENTE'.
    perform bdc_program using 'SAPMM06E' '0504'.
    *PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=ENTE'.
    *perform bdc_program using 'SAPMM06E' '0111'.
    *PERFORM BDC_FIELD   USING 'BDC_OKCODE' '=NEXP'.
      PERFORM bdc_program USING 'SAPMM06E' '0120'.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'BU'.
      CALL TRANSACTION 'ME21' USING t_bdc MODE 'N' MESSAGES INTO t_msg
      LOOP AT t_msg INTO fs_msg.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = fs_msg-msgid
            lang      = sy-langu
            no        = fs_msg-msgnr
            v1        = fs_msg-msgv1
            v2        = fs_msg-msgv2
            v3        = fs_msg-msgv3
            v4        = fs_msg-msgv4
          IMPORTING
            msg       = w_message
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
           WRITE:
             / W_message.
      ENDLOOP.                             " LOOP T_MSG
      CLEAR t_bdc[].
      PERFORM bdc_program USING 'SAPMM06E' '0105'.
      PERFORM bdc_field   USING 'RM06E-BSTNR' fs_msg-msgv2.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'AB'.
      w_num1 = w_num - 1.
      DO w_num1 TIMES.
        w_string1 = 'RM06E-TCSELFLAG(00)'.
        w_string1+17(1) = w_num1.
        PERFORM bdc_program USING 'SAPMM06E' '0120'.
        PERFORM bdc_field   USING w_string1 'X'.
        PERFORM bdc_field   USING 'BDC_OKCODE' 'DL'.
        w_num1 = w_num1 - 1.
      ENDDO.                               " DO W_NUM1
      PERFORM bdc_program USING 'SAPMM06E' '0120'.
      PERFORM bdc_field   USING 'BDC_OKCODE' 'BU'.
      CALL TRANSACTION 'ME22' USING t_bdc MODE 'A' MESSAGES INTO t_msg.
      LOOP AT t_msg INTO fs_msg.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = fs_msg-msgid
            lang      = sy-langu
            no        = fs_msg-msgnr
            v1        = fs_msg-msgv1
            v2        = fs_msg-msgv2
            v3        = fs_msg-msgv3
            v4        = fs_msg-msgv4
          IMPORTING
            msg       = w_message
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
        WRITE:
          / w_message.
      ENDLOOP.                             " LOOP T_MSG
    *&      Form  bdc_program
    This subroutine gives screenname and screen number                 *
    There are no interface parameters to be passed to this subroutine. *
    FORM bdc_program  USING    value(p_screen)
                               value(p_num).
      CLEAR fs_bdc.
      fs_bdc-program = p_screen.
      fs_bdc-dynpro = p_num.
      fs_bdc-dynbegin = 'X'.
      APPEND fs_bdc TO t_bdc.
    ENDFORM.                               " FORM BDC_PROGRAM
    *&      Form  BDC_FIELD
    This subroutine gives the field name and field value               *
    There are no interface parameters to be passed to this subroutine. *
    FORM bdc_field  USING    value(p_name)
                             value(p_value).
      CLEAR fs_bdc.
      fs_bdc-fnam = p_name.
      fs_bdc-fval = p_value.
      APPEND fs_bdc TO t_bdc.
    ENDFORM.                               " FORM BDC_FIELD
    Regards,
    jaya

  • How to write  procedure for creating a row

    Hi
    How to write procedure for creating a new row in data table when button clicked.

    Hi
    I am able to create a row.by writing a method in Application module class.
    method for creating a row in fin_years view:
    public void createRow() {
    Row newRow = (Row)getFinYearsView1().createRow();
    newRow.setNewRowState(Row.STATUS_INITIALIZED);
    //get instance of the above created view object
    ViewObjectImpl vo=getFinYearsView1();
    // to insert row at the end of the table
    vo.insertRowAtRangeIndex(vo.getRangeSize()-1, (Row)newRow);
    System.out.println(getFinYearsView1().getCurrentRowIndex());
    but it doest not create row at last in the data table.Instead it insert row in middle..

  • How to write Validations for RadioButton

    Hi All,
    in my Application , two RadioButtons and one submitbutton is there, in that
    1. yes
    2. no
    both are radio buttons
    when i click on submit button, without selecting any one of those radiobuttons ,
    it shud display error message, this errormessage i have written in iwdmessage.
    it shud show this error message, instead of displaying nullpointer exception.
    how to write validation for this.
    please help me.
    regards
    sush

    Hi shushma,
    Simply put a check that:
    If(wdContext.current<YOUR_NODE>Element().get<YOUR_ATTRIBUTE_NAME> !=null){
    else{
    // Show the error messages
    //Displaying the error message is very easy.
    //You can report exception using the message manager API's. You will get this easily on SDN.
    I hope this helps! if you need ay further help please let me know.
    Thanks and Regards,
    Pravesh

  • How to write code  for totals and subtotals in alv programing?

    how to write code  for totals and subtotals in alv programing?

    hi,
    1. <u><b>TOTAL.</b></u>
    http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
    2. <u><b>How do I add subtotals</b></u>
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    Regards
    Anver

  • How  to write code for font family using swing?

    how to write code for font family using swing?
    i tried this code.but i got only font styles.but i need font family.observ this code
    import java.awt.*;
    import java.awt.event.*;
    public class fontSelect extends java.awt.Dialog implements AdjustmentListener, ItemListener, TextListener, ActionListener {
    public Font selectedFont; //to get result
    public boolean isSelected = false;
    public Color selectedBackground, selectedForeground;
         public fontSelect(Frame parent, boolean modal) {
              super(parent, modal);
         String fntName[] = getToolkit().getFontList();
    GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
    String[] names = ge.getAvailableFontFamilyNames();
              //{{INIT_CONTROLS
              setLayout(null);
              setVisible(false);
    //setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              setSize(insets().left + insets().right + 380,insets().top + insets().bottom + 282);
              setBackground(java.awt.Color.lightGray);
    fontList = new java.awt.Choice();
              //fontList = new java.awt.List(0,false);
              add(fontList);
              fontList.setBounds(insets().left +25,insets().top + 50,137,144);
              //label1 = new java.awt.Label("Example:-");
              //label1.setBounds(insets().left + 220,insets().top + 36,84,30);
              //add(label1);
              exampleText = new java.awt.TextField();
              //exampleText.setText("sample string ");
              //exampleText.setBounds(insets().left + 40,insets().top + 50,84,21);
              //add(exampleText);
              label2 = new java.awt.Label("Font Family:-");
              label2.setBounds(insets().left + 25,insets().top + 30,70,19);
              add(label2);
              isBold = new java.awt.Checkbox("Bold");
              isBold.setBounds(insets().left + 320,insets().top + 90,60,18);
              isBold.setFont(new Font("Times New Roman", Font.BOLD, 12));
              add(isBold);
              isItalic = new java.awt.Checkbox("Italic");
              isItalic.setBounds(insets().left + 250,insets().top + 90,48,17);
              isItalic.setFont(new Font("Times New Roman", Font.ITALIC, 12));
              add(isItalic);
              showFont = new java.awt.Label("samplestring ",Label.CENTER);
              showFont.setBounds(insets().left + 240,insets().top +50,120,30);
              showFont.setBackground(java.awt.Color.white);
              add(showFont);
    label11 = new java.awt.Label("Size:-");
              label11.setBounds(insets().left + 290,insets().top + 120,70,19);
              add(label11);
              fontSize = new java.awt.Choice();
    add(fontSize);
              //label11 = new java.awt.Label("Example string");
              fontSize.setBounds(insets().left + 290,insets().top + 140,60,23);
              fontSize.setBackground(java.awt.Color.white);
              btnSelect = new java.awt.Button();
              btnSelect.setLabel("Select");
              btnSelect.setBounds(insets().left + 280,insets().top + 190,87,24);
              add(btnSelect);
              btnCancel = new java.awt.Button();
              btnCancel.setLabel("Cancel");
              btnCancel.setBounds(insets().left + 280,insets().top + 230,91,24);
              add(btnCancel);
              label3 = new java.awt.Label("Background:-");
              label3.setBounds(insets().left + 24,insets().top + 90,94,18);
              add(label3);
              rBackground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,255,0,0,255);
              rBackground.setBounds(insets().left + 24,insets().top +110 ,197,21);
              add(rBackground);
              gBackground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,255,0,0,255);
              gBackground.setBounds(insets().left + 24,insets().top + 135,197,21);
              add(gBackground);
              bBackground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,255,0,0,255);
              bBackground.setBounds(insets().left + 24,insets().top + 160,197,21);
              add(bBackground);
              label4 = new java.awt.Label("R");
              label4.setBounds(insets().left + 12,insets().top + 110,12,18);
              label4.setFont(new Font("Times New Roman", Font.BOLD, 12));
              label4.setForeground(java.awt.Color.red);
              add(label4);
              label5 = new java.awt.Label("G");
              label5.setBounds(insets().left + 12,insets().top + 135,12,18);
              label5.setFont(new Font("Times New Roman", Font.BOLD, 12));
              label5.setForeground(new Color(-16744448));
              add(label5);
              label6 = new java.awt.Label("B");
              label6.setBounds(insets().left + 12,insets().top + 160,12,18);
              label6.setFont(new Font("Times New Roman", Font.BOLD, 12));
              label6.setForeground(java.awt.Color.blue);
              add(label6);
              rBackValue = new java.awt.Label("255");
              rBackValue.setBounds(insets().left + 225,insets().top + 110,24,12);
              rBackValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
              rBackValue.setForeground(java.awt.Color.red);
              add(rBackValue);
              gBackValue = new java.awt.Label("255");
              gBackValue.setBounds(insets().left + 225,insets().top + 135,24,12);
              gBackValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
              gBackValue.setForeground(new Color(-16744384));
              add(gBackValue);
              bBackValue = new java.awt.Label("255");
              bBackValue.setBounds(insets().left + 225,insets().top + 160,24,12);
              bBackValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
              bBackValue.setForeground(java.awt.Color.blue);
              add(bBackValue);
              label7 = new java.awt.Label("Foreground:-");
              label7.setBounds(insets().left + 20,insets().top + 185,94,18);
              add(label7);
              rForeground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,0,0,0,255);
              rForeground.setBounds(insets().left + 20,insets().top + 205,197,21);
              add(rForeground);
              gForeground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,0,0,0,255);
              gForeground.setBounds(insets().left + 20,insets().top + 230,197,21);
              add(gForeground);
              bForeground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,0,0,0,255);
              bForeground.setBounds(insets().left + 20,insets().top + 255,197,21);
              add(bForeground);
              label8 = new java.awt.Label("R");
              label8.setBounds(insets().left + 10,insets().top + 205,12,18);
              label8.setFont(new Font("Times New Roman", Font.BOLD, 12));
              label8.setForeground(java.awt.Color.red);
              add(label8);
              label9 = new java.awt.Label("G");
              label9.setBounds(insets().left + 10,insets().top + 230,12,18);
              label9.setFont(new Font("Times New Roman", Font.BOLD, 12));
              label9.setForeground(new Color(-16744448));
              add(label9);
              label10 = new java.awt.Label("B");
              label10.setBounds(insets().left + 10,insets().top + 255,12,18);
              label10.setFont(new Font("Times New Roman", Font.BOLD, 12));
              label10.setForeground(java.awt.Color.blue);
              add(label10);
              rForeValue = new java.awt.Label("255");
              rForeValue.setBounds(insets().left + 220,insets().top + 205,24,12);
              rForeValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
              rForeValue.setForeground(java.awt.Color.red);
              add(rForeValue);
              gForeValue = new java.awt.Label("255");
              gForeValue.setBounds(insets().left + 220,insets().top + 230,24,12);
              gForeValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
              gForeValue.setForeground(new Color(-16744384));
              add(gForeValue);
              bForeValue = new java.awt.Label("255");
              bForeValue.setBounds(insets().left + 220,insets().top + 255,24,12);
              bForeValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
              bForeValue.setForeground(java.awt.Color.blue);
              add(bForeValue);
              setTitle("Choosing font");
              //{{REGISTER_LISTENERS
              exampleText.addTextListener(this);
              btnSelect.addActionListener(this);
              btnCancel.addActionListener(this);
              isBold.addItemListener(this);
              fontList.addItemListener(this);
              isItalic.addItemListener(this);
              fontSize.addItemListener(this);
              rBackground.addAdjustmentListener(this);
              gBackground.addAdjustmentListener(this);
              bBackground.addAdjustmentListener(this);
              rForeground.addAdjustmentListener(this);
              gForeground.addAdjustmentListener(this);
              bForeground.addAdjustmentListener(this);
    for (int i = 0; i < (int)fntName.length; i++)
    fontList.addItem(fntName);
              showFont.setFont(new Font(fntName[0], Font.PLAIN, 12));
    // GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
    //String[] names = ge.getAvailableFontFamilyNames();
    for ( int i=0; i<names.length; i++ )
    System.out.println( names[i] );
              selectedBackground = showFont.getBackground();
              selectedForeground = showFont.getForeground();
              int i = 8;
              do {
                   fontSize.addItem(""+i);
                   if (i<=30) i+=2;
                   else if (i<=70) i+=4;
                   else i+=8;
              } while (i<150);
              try {
                   fontSize.select(2);
              } catch (IllegalArgumentException e) { }
         //{{DECLARE_CONTROLS
         //java.awt.List fontList;
    java.awt.Label label11;
         java.awt.Label label1;
         java.awt.TextField exampleText;
         java.awt.Label label2;
         java.awt.Checkbox isBold;
         java.awt.Checkbox isItalic;
         java.awt.Label showFont;
         java.awt.Choice fontSize;
    java.awt.Choice fontList;
         java.awt.Button btnSelect;
         java.awt.Button btnCancel;
         java.awt.Label label3;
         java.awt.Scrollbar rBackground;
         java.awt.Scrollbar gBackground;
         java.awt.Scrollbar bBackground;
         java.awt.Label label4;
         java.awt.Label label5;
         java.awt.Label label6;
         java.awt.Label rBackValue;
         java.awt.Label gBackValue;
         java.awt.Label bBackValue;
         java.awt.Label label7;
         java.awt.Scrollbar rForeground;
         java.awt.Scrollbar gForeground;
         java.awt.Scrollbar bForeground;
         java.awt.Label label8;
         java.awt.Label label9;
         java.awt.Label label10;
         java.awt.Label rForeValue;
         java.awt.Label gForeValue;
         java.awt.Label bForeValue;
    private Font constructFont() {
    int l;
    try {
    l = Integer.parseInt(fontSize.getSelectedItem());
    } catch (NumberFormatException e) {l = 12;}
    selectedFont = new Font(fontList.getItem(fontList.getSelectedIndex()>=0?fontList.getSelectedIndex():0 ), (isBold.getState()?Font.BOLD:0)+(isItalic.getState()?Font.ITALIC:0), l);
    selectedBackground = new Color(rBackground.getValue(), gBackground.getValue(), bBackground.getValue());
    selectedForeground = new Color(rForeground.getValue(), gForeground.getValue(), bForeground.getValue());
    return (selectedFont);
         public void textValueChanged(java.awt.event.TextEvent event) {
              Object object = event.getSource();
              if (object == exampleText) showFont.setText(exampleText.getText());
         public void actionPerformed(java.awt.event.ActionEvent event) {
              Object object = event.getSource();
              if (object == btnSelect) {
    isSelected = true;
    selectedFont = constructFont();
         dispose();
    } else if (object == btnCancel) {
         selectedFont = null;
    selectedBackground = null;
    selectedForeground = null;
    dispose();
         public void itemStateChanged(java.awt.event.ItemEvent event) {
              Object object = event.getSource();
              if (object == isBold) showFont.setFont(constructFont());
              else if (object == fontList) showFont.setFont(constructFont());
              else if (object == isItalic) showFont.setFont(constructFont());
              else if (object == fontSize) showFont.setFont(constructFont());
         public void adjustmentValueChanged(java.awt.event.AdjustmentEvent event)
              Object object = event.getSource();
    constructFont();
    showFont.setBackground(new Color(rBackground.getValue(), gBackground.getValue(), bBackground.getValue()));
    showFont.setForeground(new Color(rForeground.getValue(), gForeground.getValue(), bForeground.getValue()));
    if (object == rBackground) rBackValue.setText(""+rBackground.getValue());
              else if (object == gBackground) gBackValue.setText(""+gBackground.getValue());
              else if (object == bBackground) bBackValue.setText(""+bBackground.getValue());
              else if (object == rForeground) rForeValue.setText(""+rForeground.getValue());
              else if (object == gForeground) gForeValue.setText(""+gForeground.getValue());
              else if (object == bForeground) bForeValue.setText(""+bForeground.getValue());

    Okay, that's better. It would have been nice if the code was formatted, and if there was about 20% of that code. (Your example could have been just one JLabel and nothing else, for example.)
    Anyway, now that you've posted that code, what is your question about it? I see you are calling a "getAvailableFontFamilyNames" method; do you have a question about that? If so, what is the question?

Maybe you are looking for