How to write hierarichal query when a child has multuple parent
Following sql is not able to provide the results where ever child has more then one parent, can somebody help me write the query to deal with this scenario
select w.s2_child_contract_id, w.s2_parent_contract_id, w.s2_modifier_type_nm,
LEVEL,
connect_by_root w.s2_parent_contract_id Initial_Contract_ID
from stg_owner.stg_parent_child_cnct_rel_wrk w
WHERE s2_parent_contract_id = 16099
connect by nocycle prior W.s2_child_contract_id = W.s2_parent_contract_id
Thanks
I understand, but Our Question is if child1 has more than one parent(parent 1 and parent 2) and if the child1 has a child2 then we need the parent contract_id of the Child1 as the parent contract_id for child 2 also..
ex:
103 has 2 parents -- 101 and 102
103 has one child -- 104
We need the results like this
parent_id child_id ilevel ntial_contract
103 104 2 101
103 104 2 102
103 104 3 101
103 104 3 102
But we are getting the out put like this :
parent_id child_id ilevel ntial_contract
103 104 2 101
103 104 2 102
103 104 1 104
Appreciate your response
Thanks
Similar Messages
-
How to write this query to filter combination of few values
Hi,
I have a table CHIMM which is a transaction table and contains information of the vaccines given to a child.
columns are: child_id, vacc_id, vacc_given_dt. I have to query for remaining vaccines.
HEXA is a vaccine_id which is composite vaccine of DPT1,POL1,HBV1 & HIB1 (vaccine ids).
I want to write to query if any of DPT1,POL1,HBV1 & HIB1 given then HEXA should not be displayed in the result.
OR
if HEXA is given then of course any of DPT1,POL1,HBV1 & HIB1 should not be displayed in the result.
How to write this query?
RegardsHi,
I'm still not sure what the output you want from that sample data is. Do you just want the child_ids, like this
CHILD_ID
3
4? If so, here's one way to get them:
WITH all_vacc_ids AS
SELECT c.child_id
, c.vacc_id AS child_vacc_id
, v.vacc_id
, COUNT ( CASE
WHEN c.vacc_id = 'HEXA'
THEN 1
END
) OVER ( PARTITION BY c.child_id
) AS hexa_itself
FROM vacc v
LEFT OUTER JOIN chimm c PARTITION BY (c.child_id)
ON c.vacc_id = v.vacc_id
WHERE v.vacc_desc = 'HEXA' -- See note below
SELECT child_id
FROM all_vacc_ids
WHERE child_vacc_id IS NULL
AND vacc_id != 'HEXA'
AND hexa_itself = 0
GROUP BY child_id
rha2 wrote:there are alot of vaccines, i just put 3 for example. this query gives error: invalid relational operatorAre you saying that the vacc table contains other rows, but those other rows are not needed for this problem? It would be good if you included an example in the sample data. The query above considers only the rows in vacc where vacc_desc='HEXA'. You can have other rows in the vacc table, but they won't affect the output of this query. The query above makes no assumptions about the number of rows that have vacc_desc='HEXA'; it will report all child_ids who are missing any of them, regardless of the number (assuming the child does not have the 'HEXA' vacc_id itself, like child_id=1).
You still haven't said which version of Oracle you're using. The query above will work in Oracle 10 (and higher). -
How to write sql query with many parameter in ireport
hai,
i'm a new user in ireport.how to write sql query with many parameters in ireport's report query?i already know to create a parameter like(select * from payment where entity=$P{entity}.
but i don't know to create query if more than 1 parameter.i also have parameter such as
$P{entity},$P{id},$P{ic}.please help me for this.
thanksYou are in the wrong place. The ireport support forum may be found here
http://www.jasperforge.org/index.php?option=com_joomlaboard&Itemid=215&func=showcat&catid=9 -
How to write this query ?
how to write this query ?
list the emp name who is working for the highest avg sal department.
I can use row_number over to get correct result. If we don't use this row_number function, just plain sql, how to do it ?
the row_number version is like this
select emp.* from emp ,
select deptno, row_number() over (order by avg(sal) desc) r from emp
group by deptno
)e
where e.r = 1
and emp.deptno = e.deptnoHi,
806540 wrote:
how to write this query ?
list the emp name who is working for the highest avg sal department.
I can use row_number over to get correct result. If we don't use this row_number function, just plain sql, how to do it ?ROW_NUMBER is just plain SQL, and has been since Oracle 8.1.
ROW_NUMBER (or its close relative, RANK) is the simplest and most efficient way to solve this problem. Why not do this the right way?
the row_number version is like this
select emp.* from emp ,
select deptno, row_number() over (order by avg(sal) desc) r from emp
group by deptno
)e
where e.r = 1
and emp.deptno = e.deptno
If there happens to be a tie (that is, two or more departments have the same average sal, and it is the highest), then the query above will only arbitrarily treat one of them (no telling which one) as the highest. Change ROW_NUMBER to RANK to get all departments with a claim to having the highest average sal.
You could use the ROWNUM pseudo-column instead of ROW_NUMBER, if all you want to do is avoid ROW_NUMBER.
Without using ROW_NUMBER or RANK, there are lots of ways involving other analytic functions, such as AVG and MAX.
If you really, really don't want to use analytic functions at all, you can do this:
SELECT *
FROM scott.emp
WHERE deptno IN (
SELECT deptno
FROM scott.emp
GROUP BY deptno
HAVING AVG (sal) = (
SELECT MAX (AVG (sal))
FROM scott.emp
GROUP BY deptno
; -
How to write sql query for counting pairs from below table??
Below is my SQL table structure.
user_id | Name | join_side | left_leg | right_leg | Parent_id
100001 Tinku Left 100002 100003 0
100002 Harish Left 100004 100005 100001
100003 Gorav Right 100006 100007 100001
100004 Prince Left 100008 NULL 100002
100005 Ajay Right NULL NULL 100002
100006 Simran Left NULL NULL 100003
100007 Raman Right NULL NULL 100003
100008 Vijay Left NULL NULL 100004
It is a binary table structure.. Every user has to add two per id under him, one is left_leg and second is right_leg... Parent_id is under which user current user is added.. Hope you will be understand..
I have to write sql query for counting pairs under id "100001". i know there will be important role of parent_id for counting pairs. * what is pair( suppose if any user contains both left_leg and right_leg id, then it is called pair.)
I know there are three pairs under id "100001" :-
1. 100002 and 100003
2. 100004 and 100005
3. 100006 and 100007
100008 will not be counted as pair because it does not have right leg..
But i dont know how to write sql query for this... Any help will be appreciated... This is my college project... And tommorow is the last date of submission.... Hope anyone will help me...
Suppose i have to count pair for id '100002'. Then there is only one pair under id '100002'. i.e 100004 and 100005Sounds like this to me
DECLARE @ID int
SET @ID = 100001--your passed value
SELECT left_leg,right_leg
FROM table
WHERE (user_id = @ID
OR parent_id = @ID)
AND left_leg IS NOT NULL
AND right_leg IS NOT NULL
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Hi all,
Can you please explain me how to write a query joining tables in SAP ?
Thanks,
Avani.Hi
Check info from sdn only
User T-code: SQVI
Enter your "query name" and press"create"
Enter title
In Data source " select Table join"
select basis mode and press continue.
Press Insert table and give the tabes one by one.
Drag the parameter and drop in another table to establish link and link all the tables.
Press check to check whether your link is correct, then press back
You will be able to see the tables and fields on left hand side.
Select the appropriate parameters for selection fields and list fields
Selection fields- For selection of data, the initial screen of report.
List fields are nothing but output.
Execute the report.
You will find the initial screen of report.
Give your parameters for output and execute again.
You will receive the desired output.
You can down load the output in spread sheet/ in the format desired.
At last save your query before coming out of transaction
Vishal... -
How to write sql query for below mentioned eaxmple.
Hi,
I have requirement.
There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
example: table TEST.
COLA COLB COLC COLD COLE COLF MANAGER 5 NULL NULL 3 NULL
SR.MANAGER 6 3 NULL NULL NULL
VP 5 5 4 5 5
I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
I need output as below.
COLB COLC COLD COLE COLF
5(manager) 3(sr.manger) 4(vp) 3(manger) 3(vp)
Please provide the for above mentioned output.
ThanksDuplicate thread. please view the answer posted in your first thread.
how to write sql query.
And, please don't post any duplicate thread.
Regards.
Satyaki De. -
How will write SQL query to fetch data from each Sub-partition..
Hi All,
Anyone does have any idea about How to write SQL query to fetch data from Sub-partition.
Actually i have one table having composite paritition(Range+list)
Now if i want to fetch data from main partition(Range) the query will be
SELECT * FROM emp PARTITION(q1_2005);
Now i want to fetch data at sub-partition level(List) .But i am not able to get any SQL query for that.
Pls help me to sort out.
Thanks in Advance.
AnwarSELECT * FROM emp SUBPARTITION(sp1);
-
How to write a Query a table and the return result is the column name
Hi All
Pls advise how to write a query whereas the return result is the
column name.
I know there is describe <table_name>;
Is there any other ways?
Pls advise
Tj
Edited by: user600866 on Oct 14, 2008 12:13 AMData Dictionary table user_tab_columns has all the column names. You can query that and get what ever you want.
To get the column list of a table just query
select *
from user_tab_columns
where table_name = <your_table>Edited by: Karthick_Arp on Oct 14, 2008 12:18 AM -
Revision: 14754
Revision: 14754
Author: [email protected]
Date: 2010-03-15 09:25:26 -0700 (Mon, 15 Mar 2010)
Log Message:
Fix bug FM-555: RTE when SerialElement child has a load error.
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-555
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/elements/compositeClasses/TraitLoader.as
osmf/trunk/framework/OSMFTest/org/osmf/elements/compositeClasses/TestTraitLoader.as(Removed)
-
How to write named query if we want to use IN syntax in our sql statement?
I cannot find a suitable category about named query, so please move to appropriate place if there is any.
When we write named query, below statement is fine.
Query q2 = em.createQuery("SELECT o FROM Table1 as o WHERE field1 = :input1"); q2.setParameter("input1", "value1");
Now, my question is, how can I write this type of query when we want to use the IN sql syntax? As below statement CANNOT return correct results. Even I tried to put a pair of single quote [ ':input2' ], it won't help also.
Query q2 = em.createQuery("SELECT o FROM Table1 as o WHERE field2 IN (:input2)"); q2.setParameter("input1", "3633, 3644");
Can anyone suggest? Thanks.roamer wrote:
Now, my question is, how can I write this type of query when we want to use the IN sql syntax? As below statement CANNOT return correct results. Even I tried to put a pair of single quote [ ':input2' ], it won't help also.
Query q2 = em.createQuery("SELECT o FROM Table1 as o WHERE field2 IN (:input2)");
q2.setParameter("input1", "3633, 3644");
Can anyone suggest?The above is in your code right? Not in some configuration file?
Then you do it the same way as with regular jdbc/sql.
1. You start with a collection of values - call it collection A.
1. Create a for loop that dynamically creates the string using 'bind' variables (whatever you want to call the 'colon' entity in the above).
2. Call the createQuery method using the string that was created
3. Create a second loop that iterates over A and populates with setParameter.
Pseudo code
Object[] A = ...
String sql = "SELECT o FROM Table1 as o WHERE field2 IN (";
for (int i=1; i <= A.length; i++)
if (i == 1)
sql += ":input" + i;
else
sql += ",:input" + i;
sql += ")";
Query q2 = em.createQuery(sql);
for (int i=1; i <= A.length; i++
q2.setParameter("input" + i, A[i-1]);
}By the way there is a jdbc forum. -
How to write select query for this
Hi,
I had a html form and in the for i had drop down box and it needs to select multiple values from the drop down box. When i select multiple values then i have to write the SQL select statement query .
When i try to write the select statement and trying to run i am getting error.
select * from Table
where emo_no = '1,2,3'
this is how i write query please suggest me how to write query for selecting multiple values from the drop down box.
Thanksselect * from Table
where emo_no in ( 1,2,3)
for integer values
select * from Table
where emo_no in ('1','2','3')
for characters
If we talk about large scale applications that may have millions of records, I would suggest this.
declare @t table (v int)
insert into t (v) values (1)
insert into t (v) valves (2)
insert into t (v) values (3)
select *
from table
inner join @t t on table.emo_no = t.v
Using "in" for a where clause is not so bad for filtering on a few values, but if you are filtering a lot of rows and a lot of values (emo_no) the performance degrades quickly for some reasons beyond the scope of this.
This is just one solution, I'll through this out as well, instead of an in memory (@t) table, doing a disk based temp table (#t) and creating an index on the column "v".
create table #t (v int)
insert into #t (v) values (1)
insert into #t (v) valves (2)
insert into #t (v) values (3)
create index ix_t on #t (v)
select *
from table
inner join #t t on table.emo_no = t.v
drop table #t
Pardon any syntax errors and careful using a drop statement.
Sometimes in memory tables work better than disk temp tables, it takes some testing and trial and error depending on your datasets to determine the best solution.
Probably too much info ;-)
Byron Mann
[email protected]
[email protected]
Software Architect
hosting.com | hostmysite.com
http://www.hostmysite.com/?utm_source=bb -
How to write a query for this output
I have a string ' if i know good acting , I am a hero '
now if 'hero' is present in the string it will return ' i am hero' else
'you are hero'
How to write a sql query to return the same .SQL> select (case
2 when '&a' like '%hero%' then 'I am hero'
3 ELSE 'u r hero'
4 end) output from dual;
Enter value for a: if i know good acting , I am a hero
old 2: when '&a' like '%hero%' then 'I am hero'
new 2: when 'if i know good acting , I am a hero ' like '%hero%' then 'I am hero'
OUTPUT
I am hero
SQL> /
Enter value for a: jkhkh
old 2: when '&a' like '%hero%' then 'I am hero'
new 2: when 'jkhkh' like '%hero%' then 'I am hero'
OUTPUT
u r hero
Hope this helps. -
How to write a query for the given scenario ?
Hi All ,
I am having two tables EMP, DEPT with the below data.
EMP TABLE :--
EID ENAME JOB SAL DEPID
111 RAM MANAGER 1500 10
222 SAM ASST MANAGER 2000 20
333 KALA CLERK 2500 10
444 BIMA MANAGER 3000 20
555 CHALA MANAGER 3500 30
666 RANI ASST MANAGER 4000 10
777 KAMAL MANAGER 2400 10
DEPT TABLE :--
DEPID DNAME
10 XX
20 YY
30 ZZ
Q1 : I want the sum of salary of each department and for the particular job . Here in each departmant manager, asst. manager, clerk posts are there .
I want to display the result like below ....
JOB 10 20 30
MANAGER 3900 3000 3500
ASST MANAGER 4000 2000 NULL
CLERK 2500 NULL NULL
please tell me how to write a sql query ?
Thanks
SaiIn general case, you cannot write this query.
This is one of the limits of relational database concepts. The number of columns must be known up-front. In the SELECT clause, you have to list and name all columns returned by the query. So you have to know number of departments. (There are some workarounds - you can return one column with concatenated values for all departments, separated by space character).
If you know that you have 3 departments then you qurey will return 4 columns:
SELECT
e.job,
SUM ( CASE WHEN d.deptid = 10 THEN e.sal ELSE NULL END) d10,
SUM ( CASE WHEN d.deptid = 20 THEN e.sal ELSE NULL END) d20,
SUM ( CASE WHEN d.deptid = 30 THEN e.sal ELSE NULL END) d30
FROM dept d, emp e
WHERE d.deptno = e.deptno
GROUP BY e.job -
How to write a query for grouping them the columns and give the sequence order to each group/
Hi i have table that contains country columns .
India,USA,UK like these when ever the group changed into the differt country i make a group and arrange them the sequence into those Countries
like below
1)India
2)India
1)USA
2)USA
like these to write a query ..........pls help me for this queryAssuming you're using SQL Server you can ask here:
http://www.sqlteam.com/forums/forum.asp?FORUM_ID=23
Otherwise, please ask in the relevant forum for the type of technology you're using.
Basically it's either:
select *
from [table name]
order by country
If you want to do something with groups do something like:
select (max) income, country
from [table name]
group by country
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com
Maybe you are looking for
-
Ipod Won't Sync, gives several error messages
I have been having trouble with my itunes lately. Whenever I try to plug my ipod into my computer when itunes is up, the error messages "The ipod "Alexander's Ipod" cannot be synced. The required disk cannot be found" and "Attempting to copy to the d
-
Performance problem in 7.6.6.10
We have a performance problem after doing the update from MaxDB 7.6.6.3 to 7.6.6.10. The symptom is that querys with the "<>" operator in the WHERE-Clause on a indexed Integer/SmallInteger-column slows down extremly, e.g. "WHERE FILEDNAME <> 1". On
-
How to put Download Links on a Jsp Page?
Hi, I am a student and I am working as an intern. This is my question: My boss wants me to put some download links(pdf and flash files) on to a jsp page. when a user clicks on the link, all the user info (i.e. name, filename, download time etc) shoul
-
Contacts created on iPhone4 will not update to Exchange
Exchange is set up and working for mail, calendar and contacts. All content shown on Exchange server (ie, work laptop) shows up on iPhone. Vice versa....all mail and calendar items created on iPhone show up on Exchange -- except contacts. I create co
-
Print Signature when Document is Printed
Hi Friends When a Document is approved ,I want the Signature ( As you sign on Paper ) of the person with date and time and Approved to be printed when a user takes print out of the Original File attached to DIR. How this can be achived. With Regards