How to Write Path to Exclude Specific Folder From Scanning in Endpoint Antimalware policy

Dears,
I have configured endpoint protection antimalware policy to make scanning windows servers, and I have some specific folders which I need excluded from scanning because of they are critical folders, so, when I wants to excluded the folder, how do I write
the path to add the path to excluded filed? is this correct path
C:\MyFolder or there is s special path writing?
Thanks..

If that's the folder you want to exclude then your doing fine. For more information see (List of Antimalware Policy Settings):
http://technet.microsoft.com/en-us/library/hh508785.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

  • I have scanned a document, how do I save to a specific folder on an external drive from the Preview application?

    I have scanned a document, how do I save to a specific folder on an external drive from the Preview application?

    There is no 'Save as' in Lion.  If it's a new document then select File -> Save will bring up a standard 'Save' dialog box which will allow you to specify the location.  Otherwise select File -> Duplicate and then save the duplicate.

  • Exclude specific user from aaa authorization commands

    Hi there,
    I am trying to find a solution to exclude specific users from being authorized (AAA command authorization) when entering commands on the switch/router.
    We use an AAA setup with Cisco ACS. On the devices we use:
    aaa authorization config-commands
    aaa authorization commands 1 default group tacacs+ local
    aaa authorization commands 5 default group tacacs+ local
    aaa authorization commands 15 default group tacacs+ local
    is it possible, to exclude an  user, say User1, from being command authorized?
    In other words, when User1 logs on the switch/router, the switch/router shouldn't check the ACS if User1 is authorized to use this command.
    We tried this with method lists in combination with ACL's on the VTY's:
    line VTY 0
    access-class 1 in
    line VTY 1
    access-class 2 in
    Let's say, User1 always logs in from a specific IP, which is mentioned in access-list 2, the switch would use the method mentioned within the line vty 1.
    But apparently, when a remote connection is being established, the switch/router uses the first VTY which is available, instead of watching which ACL can be matched to the source IP from the User.
    Does anyone have some tips/tricks how to handle this?
    Maybe a custom attribute from the ACS?
    Kind Regards

    If that user belongs to a unique group then you can write a policy where "if the user is in group x then return "access_reject" Or return "access_accept" but set the privilege level to "1" and block all commands. 
    Thank you for rating helpful posts!

  • How can i delete photos in a folder from my Iphone 4s.  when it was synced, the photos went to two folders and not to the camera roll

    How can I delter photos in a folder from my Iphone 4s?  When I synced the new phone from the Itunes, the photos went to two folders and not the camera roll. 

    thanks, should I delete all the phones on Itunes and re sync the old phone, then resync the new phone to get the pictures?  Will they go to camera roll instead of a folder?

  • How do I remove an empty gmail folder from my iPad2?

    How do I remove an empty gmail folder from my iPad2?

    I Think that you had a corrupt email or an email with a really large attachment in that folder and it is now causing the mail app to crash. When the app closes and goes back to the home screen, that is an app crashing. I would try to delete this folder on the server. Log into your Gmail in a web browser and try to delete it there. If you delete it there, that will delete it on the iPad.

  • How do i delete a contacts sub folder from my iphone?

    How do i delete a contacts sub folder from my iPhone?

    Hi, sure.
    Under "contacts" "Groups" I have the "All Contacts" option at the top, underneath that i have 3 empty subfolders that have come in from my PC Outlook program. I've deleted these from Outlook, shut Outlook down, shut iTunes down, re started both programs and re synced my iPhone4 and iPhone5. They are still on the iPhone 4, just given to my wife, but have disappeared from my iPhone 5!

  • How do i delete an unwanted picture folder from my iphone 4?

    how do i delete an unwanted picture folder from my iphone 4?

    Are these photos that were sync to your phone via itunes?
    If so you unsync them.

  • How can I compare a (partial) export folder from iPhoto to an event in iPhoto to find images not exported?

    How can I compare a (partial) export folder from iPhoto to an event in iPhoto to find images not exported?  Or better yet, how can I export selected events to a new iPhoto library or an existing iPhoto library with events, titles and keywords intact?

    Ask here:
    https://discussions.apple.com/community/ilife/iphoto

  • How will write SQL query to fetch data from  each Sub-partition..

    Hi All,
    Anyone does have any idea about How to write SQL query to fetch data from Sub-partition.
    Actually i have one table having composite paritition(Range+list)
    Now if i want to fetch data from main partition(Range) the query will be
    SELECT * FROM emp PARTITION(q1_2005);
    Now i want to fetch data at sub-partition level(List) .But i am not able to get any SQL query for that.
    Pls help me to sort out.
    Thanks in Advance.
    Anwar

    SELECT * FROM emp SUBPARTITION(sp1);

  • How do I properly exclude a folder from a time machine backup?

    I want to exclude my music from the backup to keep the size down because I already have it backed up on a separate device. I add my Music folder to the exclude list and the size estimate in the bottom right of the time machine options sheet reflects the exclusion but when the backup starts, the size of the backup is as if the folder was not excluded. How do I make it so that is actually does exclude the folder?

    See
    http://pondini.org/TM/14.html

  • How to search for a flle in specific folder from forms 6i

    Hi all,
    I am using oracle forms 6i version.Now I have some pdf files in a specific folder.How can i search for a specific file in that folder from forms.Any help would be appreciated.Thanks in advance
    Regards
    Ranganath

    Hello,
    <p>Have a look at the d2kwutil library, tou can download on OTN.</p>
    Francois

  • Is there a way to exclude specific calendars from Notifications and alerts?

    I have 4 calendars:  1 Exchange and 1 Yahoo that includes 2 shared calendars (wife and MIL).  I activate the Yahoo calendars only when I need them and do not need any yahoo reminders at all.  When I swipe down the Notifications page, it includes all four calendars including the shared Yahoo calendars. What's worse, I get alerts from all four calendars. 
    I only want Exchange alerts and notifications. Is there a way to exclude the Yahoo calendars from Notifications and alerts?
    Right now, the only way I can eliminate them is by deactivating the Yahoo account in Settings/Mail, Contacts, Calendars.

    Is there a way to only choose specific contacts from an existing group and add to a new group? 
     I mean there has be a faster way than typing everybody by hand..

  • How can I remove the junk mail folder from appearing in my macbook mail program?

    Hi all
    Can someone please tell me how I can remove the "junk" mailbox from showing in my mail program on my macbook? It wasn't there before and I would like it removed. I've attached a screen shot to be clearer in my request.
    Thank you!

    Hey PrincessJasmine,
    I see that you wish to get rid of the Junk Mail folder from your sidebar in Mail on OS X. I have an article for you that will explain how to do this:
    Choose Mail > Preferences, then click Junk Mail. Make sure “Enable junk mail filtering” and “Mark as junk mail, but leave it in my Inbox” are selected.
    Mail (Yosemite): If junk mail filters aren’t working correctly
    https://support.apple.com/kb/PH19190
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • How can i sync more than one folder from My Pictures to my iphone 4?, how can i sync more than one folder from My Pictures to my iphone 4?

    Hi,
    how can I sync more than one folder of pics from My Pictures on my computer to my iphone?

    http://support.apple.com/kb/HT4236

  • How to write plan data into Transactional Cube from Visual Composer ?

    Dear experts,
    Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the  transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
    In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
    But I am not sure how to save the changes back to transactional cube from VC.
    Could anyone please kindly advise how to achieve this.
    "Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
    Many thanks,
    Sen

    Hi Sen,
    As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
    Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
    Regards,
    Enrique

Maybe you are looking for

  • How to get the values from a LOV

    Hi I have a LOV which can I have some times only one record , in this case I want when the user click on the boutton of the LOV , the informations of the record goes immediatly to the corresponding item in the block without showing the lov to the use

  • Spry MenuBarHorizontal collapses in FF

    Hello, on my site www.michaelcrabtree.co.uk the MenuBarHorizontal works fine in IE but collapses completely in FF (3.0.6) to its left hand position with all the menu bar items appearing on top of each other - 2 links work, the most right hand one (co

  • Removing the approval stage in the process of creation / maintenance roles (BRM)

    Gentlemen, Would help to change my process of creating and maintaining Roles via BRM. I want to remove the last phase of my process is approval. Thank you very much.

  • Recommened export settings to youtube

    What do you recommend as the best export settings from premiere pro cs6 to youtube?  I'm finding that when I upload to youtube, the lightings is considerably lower and the sound is moved up 2-3 frames.  Any advice would be appreciated. Thanks, Robert

  • How to play next audio book file/chapter?

    Trying to setup an ipad2 for my mother and load some of her audio books on it.  The audio books are mostly in mp3 format with some being in m4a.  Books are marked as audio book format. Problem is that when placed on the ipad and accessed by going thr