How to write programs for selfdeveloped message based instruments?

I developed a message based interface by myself, but I have no experience of developing instrument drivers with Labwindow/CVI. I want to know which commands will be sent to the instruments when power up? It's very strange that when I plug in my instrument, the light of Access of resource mamager keep on lighted and the HP-VISA Assistant can't recoganize all the instruments in the mainfram. I want to know how to let my instrument be recoganized by system. Thank you very much!

What is the VXI controller for your system? What VXI driver is running on the system? You mention HP-VISA, is your VXI controller and driver from HP or Agilent? If so, you will need to contact them on how to get your instrument recognized and working in the system.
To write your instrument driver, I would recommend using VISA commands. Message based instruments have sets of specific commands that they respond to. Generally, one would have to look in the documentation for that instrument to determine the instruments commands.

Similar Messages

How to write program for handling script ?

In script i have 2 pages.
In first page i have constant windows and variable windows.
In second page i have main window.
How to write program for this?

Hi
You need to write a driver program. You need to use open form, then write_form to write data into various windows and then close_form to close.
As you don't want main window in the first page first try out just by having the window in the second page; i guess system will take care of it. As all other windows filled and if u start writing data in the main it'll go for next page.
If doesn't work have the window on the first page with the least hight and write a command
IF &SYST-PAGE& EQ 1
    NEXT-PAGE.
ENDIF.
Then in the second page you can have the main window hight as per your requirement.
Here is an example
(1) Get customer data
TABLES: scustom, sbook, spfli.
DATA: bookings like sbook...
select * from...
(2) Open form
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      DEVICE = 'PRINTER'
      FORM = 'S_EXAMPLE_1'
      DIALOG = 'X'
    EXCEPTIONS
      others = 1
(3) Print table heading
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      ELEMENT = 'HEADING'
      TYPE = 'TOP'
      WINDOW = 'MAIN'
      FUNCTION = 'SET'
(4) Print customer bookings
LOOP AT bookings WHERE
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'BOOKING'
        TYPE = 'BODY'
        WINDOW = 'MAIN'
ENDLOOP
(5) Close form
CALL FUNCTION 'CLOSE_FORM'
Regards
Surya.

How to write program for the long text in EMIGALL for the DEVICE LOCATION.

Hi,
I am pretty new to this ISU field and i have been asked to code for a Long Text in EMIGALL for DEVICE LOCATION,
so i would like someone can help me with it.
thanks in advance.
Robert.

Robert,
You can find most of the answers to your questions in the Guidelines:
Chapter 2.4.2 describes how to configure the field rule Fixed Value.
Chapter 2.4.5 describes how to configure the field rule via KSM.
Chapter 2.5 descibes the Key- and Status Management and the usage of the the KSM in field rules.
The specific answer to your questions are:
(1) ...When i was adding the fixed rule, it was asking for domain so what should be the Domain that i should add ... You may ignore the domain field when creating a fixed value object. It's more for information purposes.
(2) ... and what should i keep the fixed value, string or filed or abap rule ... I'd suggest to use 'String' and enter the specific value in the field 'FV contents'.
(3) ... Finally you need to adjust the RETURN-FIELD of the newly created BAPI migration object to AUTO-X_HEAD-TDNAME, where do i make this adjustment can you specify that ... The return field can only be adjusted int the migration object maintenance screen (MigObject -> Change). Please see chapter 3.1 for more details on the 'return field' and figure 3-8 in chapter 3.4.2 how to generate a BAPI migration object.
(4) ... Well i would also like to ask about the x_head-tdname = via KSM (e.g. DEVLOC), where should i put the value ... You wanted to know how to migrate a long text of a device location migration object DEVLOC). According to chapter Chapter 2.4.5 you need to enter the name of the superior migration object (here DEVLOC) in the 'MigObject1'field on the 'via KSM' sub-screen on the field maintenance screen.
(5) ... and what exactly would it be can i put DEVLOC in the ID of technical Object and where should i put this value... I am not sure I understand your question. In the end you will need to pass the number (ID) of the technical object in the TDNAME field. Either you put the id into the import file (only if you know the id) or you need to use the 'via KSM' field rule to replace the legacy system key of the device location by the SAP key by the load report and prior to passing the auto data to the application thus your new function module.
Kind regards,
Fritz

How to write code for totals and subtotals in alv programing?

how to write code for totals and subtotals in alv programing?

hi,
1. TOTAL.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
2. How do I add subtotals
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
Regards
Anver

How to write BDC for KP06

Hi,
How to write BDC, for Tcode KP06, How to handle the table control in that Tcode.
or any other way to upload data for this Tcode.
Regards
Manohar

Hi,
check the sample code for transaction ME51 and ME21.
PARAMETERS:
p_fname TYPE ibipparms-path.
*" Data declarations...................................................
Work variables *
DATA:
fs_bdc TYPE bdcdata,
fs_msg TYPE bdcmsgcoll.
Internal table to hold bdc data *
DATA:
 t_bdc LIKE
STANDARD TABLE
 OF fs_bdc.
Internal table to hold bdcmessage data *
DATA:
 t_msg LIKE
STANDARD TABLE
 OF fs_msg.
DATA:
w_string(50) TYPE c,
w_string1(19) TYPE c,
w_message(72) TYPE c,
w_num TYPE i VALUE 1,
w_num1 TYPE i.
*" Type declarations...................................................
Type declaration of the structure to hold header data *
DATA:
BEGIN OF t_header OCCURS 0,
 ftype TYPE c,
 doctype(10) TYPE c,
 acctcat(4) TYPE c,
 date(10) TYPE c,
 plant(4) TYPE n,
 text(10) TYPE c,
 qty(5) TYPE n,
 units(5) TYPE c,
 pgrp(3) TYPE n,
 mgrp(3) TYPE n,
 price(2) TYPE n,
 gacct(6) TYPE n,
 cost(4) TYPE n,
END OF t_header.
 START-OF-SELECTION EVENT *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
 IMPORTING
 file_name = p_fname
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = 'c:\temp\item2.txt'
FILETYPE = 'ASC'
 has_field_separator = 'X'
 TABLES
 data_tab = t_header
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
LOOP AT t_header WHERE ftype = 'H'..
 CLEAR fs_msg.
 IF t_header-ftype = 'H'.
 PERFORM bdc_program USING 'SAPMM06B' '0100'.
 PERFORM bdc_field USING 'eban-BSART' t_header-doctype.
 PERFORM bdc_field USING 'eban-KNTTP' t_header-acctcat.
 PERFORM bdc_field USING 'RM06B-EEIND' t_header-date.
 PERFORM bdc_field USING 'eban-WERKS' t_header-plant.
 PERFORM bdc_field USING 'BDC_OKCODE' 'AB'.
 ENDIF.
 IF t_header-ftype = 'I'.
 LOOP AT t_header WHERE ftype = 'I'.
 PERFORM bdc_program USING 'SAPMM06B' '0106'.
 w_string = 'EBAN-TXZ01(01)'.
 w_string+12(1) = w_num.
 PERFORM bdc_field USING w_string t_header-text.
 w_string = 'EBAN-MENGE(01)'.
 w_string+12(1) = w_num.
 PERFORM bdc_field USING w_string t_header-qty.
 w_string = 'EBAN-MEINS(01)'.
 w_string+12(1) = w_num.
 PERFORM bdc_field USING w_string t_header-units.
 w_string = 'EBAN-EKGRP(01)'.
 w_string+12(1) = w_num.
 PERFORM bdc_field USING w_string t_header-pgrp.
 w_string = 'EBAN-MATKL(01)'.
 w_string+12(1) = w_num.
 PERFORM bdc_field USING w_string t_header-mgrp.
 PERFORM bdc_field USING 'BDC_OKCODE' '=KN'.
 w_num = w_num + 1.
 PERFORM bdc_program USING 'SAPMM06B' '0102'.
 PERFORM bdc_field USING 'EBAN-preis' t_header-price.
 PERFORM bdc_field USING 'BDC_OKCODE' '=KN'.
 PERFORM bdc_program USING 'SAPMM06B' '0505'.
 PERFORM bdc_field USING 'BDC_OKCODE' '=KWE'.
 PERFORM bdc_program USING 'SAPlkacb' '0002'.
 PERFORM bdc_field USING 'EBAN-sakto' t_header-gacct.
 PERFORM bdc_field USING 'cobl-kostl' t_header-cost.
 PERFORM bdc_field USING 'BDC_OKCODE' '=ENTE'.
 PERFORM bdc_program USING 'SAPMM06B' '0102'.
 PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
 ENDIF.
 ENDLOOP.
ENDLOOP.
PERFORM bdc_program USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE' 'BU'.
 PERFORM BDC_PROGRAM USING 'SAPMM06E' '100'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' 'BACK'.
CALL TRANSACTION 'ME51' USING t_bdc MODE 'N' MESSAGES INTO t_msg.
LOOP AT t_msg INTO fs_msg.
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = fs_msg-msgid
 lang = sy-langu
 no = fs_msg-msgnr
 v1 = fs_msg-msgv1
 v2 = fs_msg-msgv2
 v3 = fs_msg-msgv3
 v4 = fs_msg-msgv4
 IMPORTING
 msg = w_message
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 WRITE:
 / w_message.
ENDLOOP.
CLEAR t_bdc[].
PERFORM bdc_program USING 'SAPMM06E' '0100'.
PERFORM bdc_field USING 'EKKO-LIFNR' '1000'.
PERFORM bdc_field USING 'EKKO-EKORG' '1000'.
PERFORM bdc_field USING 'EKKO-EKGRP' '100'.
PERFORM bdc_field USING 'BDC_OKCODE' 'BS'.
PERFORM bdc_program USING 'SAPMM06E' '0501'.
PERFORM bdc_field USING 'EKET-BANFN' fs_msg-msgv1.
PERFORM bdc_field USING 'BDC_OKCODE' '=KOPF'.
PERFORM bdc_program USING 'SAPMM06E' '0125'.
PERFORM bdc_field USING 'BDC_OKCODE' 'MALL'.
PERFORM bdc_program USING 'SAPMM06E' '0125'.
PERFORM bdc_field USING 'BDC_OKCODE' 'REFH'.
PERFORM bdc_program USING 'SAPMM06E' '0504'.
PERFORM bdc_field USING 'BDC_OKCODE' '=ENTE'.
PERFORM bdc_program USING 'SAPMM06E' '0111'.
PERFORM bdc_field USING 'BDC_OKCODE' '=NEXP'.
*perform bdc_program using 'SAPLSPO1' '0300'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' 'YES'.
PERFORM bdc_program USING 'SAPMM06E' '0504'.
PERFORM bdc_field USING 'BDC_OKCODE' '=ENTE'.
PERFORM bdc_program USING 'SAPMM06E' '0111'.
PERFORM bdc_field USING 'BDC_OKCODE' '=NEXP'.
*perform bdc_program using 'SAPMM06E' '0504'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' '=ENTE'.
*perform bdc_program using 'SAPMM06E' '0111'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' '=NEXP'.
perform bdc_program using 'SAPMM06E' '0504'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' '=ENTE'.
perform bdc_program using 'SAPMM06E' '0504'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' '=ENTE'.
*perform bdc_program using 'SAPMM06E' '0111'.
*PERFORM BDC_FIELD USING 'BDC_OKCODE' '=NEXP'.
PERFORM bdc_program USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_OKCODE' 'BU'.
CALL TRANSACTION 'ME21' USING t_bdc MODE 'N' MESSAGES INTO t_msg
LOOP AT t_msg INTO fs_msg.
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = fs_msg-msgid
 lang = sy-langu
 no = fs_msg-msgnr
 v1 = fs_msg-msgv1
 v2 = fs_msg-msgv2
 v3 = fs_msg-msgv3
 v4 = fs_msg-msgv4
 IMPORTING
 msg = w_message
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 WRITE:
 / W_message.
ENDLOOP. " LOOP T_MSG
CLEAR t_bdc[].
PERFORM bdc_program USING 'SAPMM06E' '0105'.
PERFORM bdc_field USING 'RM06E-BSTNR' fs_msg-msgv2.
PERFORM bdc_field USING 'BDC_OKCODE' 'AB'.
w_num1 = w_num - 1.
DO w_num1 TIMES.
 w_string1 = 'RM06E-TCSELFLAG(00)'.
 w_string1+17(1) = w_num1.
 PERFORM bdc_program USING 'SAPMM06E' '0120'.
 PERFORM bdc_field USING w_string1 'X'.
 PERFORM bdc_field USING 'BDC_OKCODE' 'DL'.
 w_num1 = w_num1 - 1.
ENDDO. " DO W_NUM1
PERFORM bdc_program USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_OKCODE' 'BU'.
CALL TRANSACTION 'ME22' USING t_bdc MODE 'A' MESSAGES INTO t_msg.
LOOP AT t_msg INTO fs_msg.
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = fs_msg-msgid
 lang = sy-langu
 no = fs_msg-msgnr
 v1 = fs_msg-msgv1
 v2 = fs_msg-msgv2
 v3 = fs_msg-msgv3
 v4 = fs_msg-msgv4
 IMPORTING
 msg = w_message
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 WRITE:
 / w_message.
ENDLOOP. " LOOP T_MSG
*& Form bdc_program
This subroutine gives screenname and screen number *
There are no interface parameters to be passed to this subroutine. *
FORM bdc_program USING value(p_screen)
 value(p_num).
CLEAR fs_bdc.
fs_bdc-program = p_screen.
fs_bdc-dynpro = p_num.
fs_bdc-dynbegin = 'X'.
APPEND fs_bdc TO t_bdc.
ENDFORM. " FORM BDC_PROGRAM
*& Form BDC_FIELD
This subroutine gives the field name and field value *
There are no interface parameters to be passed to this subroutine. *
FORM bdc_field USING value(p_name)
 value(p_value).
CLEAR fs_bdc.
fs_bdc-fnam = p_name.
fs_bdc-fval = p_value.
APPEND fs_bdc TO t_bdc.
ENDFORM. " FORM BDC_FIELD
Regards,
jaya

HR ABAP How to Write BDC For Infotype 0586

Hi Experts
Can Any One tell me how to write BDC for Infotype 0586 and also 585.
If we enter into the maintaining Screen, the lines in the Screen will dynamically changing depending on the values.
When I am doing recording , If I press page down after entering values in top lines, the lines are changing and the records are not updating Correctly.
I need to write BDC to Create Change.
Can any one please help me in this regard?
Thanks in Advance.
Regards
Avinash.

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.google.co.in/search?hl=en&q=SAPBDCtable+control&meta=
http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm

How to write Validations for Sample Data??

Hi Frnds,
I want to know how to write validations for sample oracle data?? Can anyone explain anyone clearly??
Regards,
Raj

Hi shushma,
Simply put a check that:
If(wdContext.current<YOUR_NODE>Element().get<YOUR_ATTRIBUTE_NAME> !=null){
else{
// Show the error messages
//Displaying the error message is very easy.
//You can report exception using the message manager API's. You will get this easily on SDN.
I hope this helps! if you need ay further help please let me know.
Thanks and Regards,
Pravesh

How to write BDC for tcode F-32

Hi Experts,
How to write BDC for tcode F-32 .
is it possible i recorded in SHDB BUT IF I AM DOING IT'S COMING WRONG .
plz guide me sir.
regars,
Hari
Edited by: hari311 on Oct 27, 2009 9:22 AM

There might be that when u provide the data in the selction screen of F-32 and press process open items some custom program might be attached to it and gets executed...
chek it out..
if so..
pass the bdcdata of the second screen into a memory id
export t_bdcdata into v_memid.
in that custoom report jus import this..
then fill the t_bdcdata with the header information and call the transcation f-32..
Edited by: imran khan on Oct 27, 2009 9:35 AM

How to write Validations for RadioButton

Hi All,
in my Application , two RadioButtons and one submitbutton is there, in that
1. yes
2. no
both are radio buttons
when i click on submit button, without selecting any one of those radiobuttons ,
it shud display error message, this errormessage i have written in iwdmessage.
it shud show this error message, instead of displaying nullpointer exception.
how to write validation for this.
please help me.
regards
sush

Hi shushma,
Simply put a check that:
If(wdContext.current<YOUR_NODE>Element().get<YOUR_ATTRIBUTE_NAME> !=null){
else{
// Show the error messages
//Displaying the error message is very easy.
//You can report exception using the message manager API's. You will get this easily on SDN.
I hope this helps! if you need ay further help please let me know.
Thanks and Regards,
Pravesh

How to write query for this in TopLink ?

I am doing a simple search in jsp where the search will the based on the choices chosen by user.
I had given 3 check boxes for those choices.
The problem is, query will be based on the choice or choices chosed by the user.
How to write query for this in TopLink ?
Thanks in Advance..
Jayaganesh

Try below solution, it is NOT best solution but might work:
Declare @Questions TABLE (QuestionID INT, QuestionText Varchar(100))
INSERT INTO @Questions
VALUES (1, 'Comment'), (2, 'Score')
DECLARE @Answers TABLE (authkey INT, QuestionID INT, questiontext VARCHAR(100), answertext VARCHAR(100))
INSERT INTO @Answers
VALUES (101, 1, 'comment', 'hi!!'), (101, 2, 'score', '4'), (102, 1, 'comment', 'excellent'), (102, 2, 'score', '5'), (103, 2, 'score', '6'), (104, 2, 'score', '8')
SELECT
A.AuthKey
,Q.QuestionID
,Q.QuestionText
,A.AnswerText
FROM
@Questions Q
INNER JOIN @Answers A ON Q.QuestionID = A.QuestionID
UNION
SELECT
A.AuthKey
,Q.QuestionID
,Q.QuestionText
,Null
FROM
@Questions Q
CROSS JOIN @Answers A
WHERE
NOT EXISTS (SELECT 1 FROM @Answers SubQry WHERE SubQry.AuthKey = A.AuthKey AND SubQry.QuestionID = Q.QuestionID)
Output
AuthKey | QuestionID
| QuestionText
| AnswerText
101 | 1 | Comment | hi!!
101 | 2 | Score | 4
102 | 1 | Comment | excellent
102 | 2 | Score | 5
103 | 1 | Comment | NULL
103 | 2 | Score | 6
104 | 1 | Comment | NULL
104 | 2 | Score | 8
Best Wishes, Arbi; Please vote if you find this posting was helpful or Mark it as answered.

How to create program for bapi?

hi all,
how to create program for bapi?
reply me soon now.....
can anybody help me.....
thanks,
S.Suresh.
Title was edited by:
Alvaro Tejada Galindo

Hi ...Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Overall Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
BAPI Creation Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
Reference :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm

How 2 find program for smartform

how 2 find program for smartform

Hi,
go to TNAPR table and find the driver program for the layout.
give the layout name, if you know the output type also give it.
OR
go to se71 and go to the layout , check the text elements syntax then it will show the possible driver programs in the window to choose.
that way you can find..
Or else...
Go to the Tcode -> NACE
OR
Go to the T-code 'SMARTFORMs'
Give your form name
go to the general attributes.
Check the Package name.
then go to T-Code-> SE80
there check the program name for a package wise
Regards,
KK
Message was edited by:
Kishore Kumar Karnati

How to write comments for a class

hi
how to write comments for a class

I'm reeling with incredulity, and as such am unable to do anything except just post some code
// this is a single line comment
/* this is a multiline comment.
it can be spread over as many lines as you
want */Or are you asking about how to decide what the content should be?

Does anybody know how to write GUI for J2ME?

Does anybody know how to write GUI for J2ME?
Thanks!

Hi..! I don't know exactly... it's a good question. I refered something. U visit below URL's.
http://www.java-pro.com/upload/free/features/javapro/2000/13iss00/rg0013/rg0013.asp
http://developer.java.sun.com/developer/technicalArticles/wireless/midpui/

How to write code for page up and page down buttons on alv screen?

Hi,
Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n) these are enabled and working properly, but we can't debug this with /h
How to write code for page up and page down buttons on alv screen?

Poonam,
On doing the screen debugging it took me over to    Include LSTXWFCC ,kindly check the below code.
module cc_display.
fcode = sy-ucomm(4).
case sy-ucomm(4).
    when 'P--'.
      perform cc_firstpage.
    when 'P-'.
      perform cc_prevpage.
    when 'P+'.
      perform cc_nextpage.
    when 'P++'.
      perform cc_lastpage.
    when 'EX--'.
      perform cc_firstcopy.
    when 'EX-'.
      perform cc_prevcopy.
    when 'EX+'.
      perform cc_nextcopy.
    when 'EX++'.
      perform cc_lastcopy.
I guess it can give you some lead.
K.Kiran.

How to write programs for selfdeveloped message based instruments?

Similar Messages

Maybe you are looking for