How to you fix the aspect ratio for DV imports

DV format is 720x480 but designed for rectangular pixel to preserve 3:2 aspect ratio.
Why does QT not play those files with the proper aspect ratio?
What is the recommended setting to export DV into H264 to keep the 3:2 aspect ratio?

MobileMe Services has been stopped by Apple and is no more available, so if you have issue with your Outlook then you will have to Remove MobileMe Services from your Computer to fix the issue.
To Uninstall MobileMe from your Computer Go to Control Panel> Select MobileMe> Right Click on it and select Change> Uninstall (Close Outlook before removing MobileMe if it is Open) after uninstall is completed Restart your Computer and see if the problem persist.

Similar Messages

IMovie 10.0 How can you keep the aspect ratio to 4:3 for older movie clips?

I upgraded to iMovie 10.0 from 9.09. When I try to use an older movie clip that was shot in 4:3, iMovie changes it to 16:9. Is there a way to keep the aspect ratio intact?

IMovie version 10.0.7. OS X 10.10.2
is my question clear enough?

Thank you for fixing the aspect ratio for 14.1 Dell Notebooks

All the way up until the last build, it has been rather difficult work around the fact that the windows 8.1 pro or enterprise would allow for full resolution on an E6410 i5 8GB RAM, (was not able to use the full screen of Visual Studio or Expression; which
was an external monitor that worked quite nicely. But I did wonder why my OS was stating that below 1080 is the recommended and only setting.
In the last build the snap function did not work at all especially across two monitors. Now it works great!
Only have intermittent issues with wifi but a ipconfig /renew and ipconfig /flushdns works fine for the meantime.
Thank you, we are putting it on our phones and our Surfaces, as well as beginning the certification to place it on the eco tabs from OEM China.
R2DC I hope this was the right place to offer praise.

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

How do you change the aspect ratio of a video from 4:3 to 16:9?

in final cut pro x

Aspect ratio is set automatically. But, there are times when someone messed something up in a clip before you got it. I recently had that happen, 16:9 HD was squashed to 4:3 SD, but you can deal with that easily. You can change it with the Transform > Scale > X parameter. In my specific case, I set Scale X parameter to 134% and was done with it.

How can I change the aspect ratio of an image display

I am snapping a sequence of images and using imgPlot to diplay the images. However, due to my camera specifications [it's a Pulnix 9701 with Pixel Size 11.6μm (H) X 13.3μm (V)], the image I get displayed is elongated in the horizontal direction, i.e. if I snap an image of a square, I get a rectangle on my computer display.
How can I change the aspect ratio of the display on my computer? The only parameters I have seen so far just control what portion of the image is acquired or diplayed, but none actually changes the aspect ratio.
Thanks in advance for any help.

If you are using an analog camera, you can set the aspect ratio in MAX. This will correct for non-square pixels.
If you are using a digital camera, I don't think there is a way to fix it during acquisition. You could resample the image to correct the ratios, but that would be a slow, time consuming process.
One other possibility is that your computer monitor is in a mode which is not a standard 4x3 configuration. For example 640x480 and 800x600 are 4:3 ratios. 1200x1024 is not, which tends to distort your displayed images.
Bruce
Bruce Ammons
Ammons Engineering

How do I set the aspect ration for 4:3 or for 16:9?

How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?

PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR

How can I change the aspect ratio

I connected my new Apple TV 2 to an LCD projector (Epson 9300) using a Belkin HDMI-to-DVI cable. The projector supports a variety of resolutions, but the aspect ratio is fixed at 4:3. The picture is therefore stretched vertically. How can I change the aspect ratio on the Apple TV?

How can I change the aspect ratio on the Apple TV?
You can't. The TV device plays content at the encoded aspect ratio. It is up to your viewing device to alter the display aspect if it can. Your primary options are to use a different viewing device capable of multiple aspect ratios, scaling, and/or zoom effects or you could simply letterbox your content when you encode it.

How I can correct the aspect ratio?

Hi, I hope you can help me.
I want to resize a 1920x1080 to 1440x1080 video, how I can correct the aspect ratio of HD video without the black bars appear above and below?

The original image is stretched horizontally and I want to fix this by resizing the video output to fill the full frame (4:3) without the lines that appear above and below, Premiere is not allowing me this.
I can do it using video converters but the results do not convince me, do not make the 4 processor cores and cause loss of frames in the video.
So I prefer to edit and convert directly into Premiere.
(I used google translator to write this)

How do you fix the 2 to 3 second voice delay when answering iphone 5 this is with multiple carriers and its unaceptable on a phone that cost almost 700 dollars it did not happen on my cheap prepay samsung

how do you fix the 2 to 3 second delay on hearing somones voice when answering the iphone 5 this happens on lots of iphone 5s with differant carriers so its not one carriers problem its probably apples this is unacceptable on such an expensive phone and very irratating. my last cheap samsung t mobile 50 dollar pre pay never did this,im new in my contract an will take the phone back if i have to put up with this for 2 years.other than that huge problem i love the phone. i dont understand why this did not get covered like the maps problem,cause its a lot of phones and its probably an ios problem.

Wow!
I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
If nothing else this totally highlights how complicated BT have managed to make their packages.
A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

How do you fix the itunes R6034 error

How do you fix the R6034 error with itunes?

A few more details....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

Hi Blands02!
Here is an article that will help you troubleshoot this issue:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

How do you change the Apple ID for my iPhone 4?

How do you change the Apple ID for my iPhone 4. I am able to access my iTunes account using my new ID and password on my computer; however, my iphone has a different Apple ID and I do not have cannot access iTunes on this phone.

Also, if you have iCloud, you will probably also want to change the iCloud account on the phone to be yours:
Settings>iCloud - if Account is not yours, go to the bottom and Delete Account. Then sign back on with your iCloud account info.
Cheers,
GB

How do you change the pink highlight for the present day in calendar when in week view

How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
     setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
     if(isSelected == true)
          setForeground(Color.red);
     else
          setForeground(Color.black);
     setValue(value);
     return this;
regards,
bala

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How to you fix the aspect ratio for DV imports

Similar Messages

Maybe you are looking for