How to Zoom in and zoom out

Hi All,
I am making a JFrame in which animation is shown. Balls are moving randomly on the canvas. I want to zoom in and zoom out the animation. How can i do that . Any source code or ant tip please.

AffineTransformya, or Graphics2D.scale

Similar Messages

  • How to fade in and fade out audio in the new version of Imovie?

    Please help me!
    how to fade in and fade out audio in the new version of Imovie?

    There is a tiny dot at the beginning and ending of an audio clip that can be moved to adjust fade in and fade out.

  • How can I open and fill out a Secured Adobe PDF job application?

    How can I open and fill out a Secured Adobe PDF job application?

    Hi margueritew68053277,
    You should be able to fill that out using the free Adobe Reader, or Adobe Fill & Sign.
    Best,
    Sara

  • How to zoom out and view an entire track in the window

    There's got to be a way to zoom out so an entire track can viewed at once so that segments of the track can be shifted around. I have a track that is about 50 minutes long with several segments in it. I want to shift the segments around. Right now I can only view about a minute of the track at a time and have to click on the segment then move the cursor either left or right and wait for Garageband to scroll to the time where I want to put it. Isn't there a way to just zoom out and view the entire track and then shift segments around without all the scrolling? Does that make sense?

    Christoph Drösser wrote:
    Hm ... mine zooms out to more than an hour?
    interesting!
    I opened GB4 and it maxed out at 4 minutes. then i opened GB6 and it maxed out at 15 minutes. then i opened another project in GB 6 and it maxed out at 35 minutes.
    so there must be something else going on here, perhaps like how time sigs affected length in the older versions?

  • How to Zoom Out

    I'm using iMovie 7.1.4 to create a video that will include a slide show of photos with transitions, titles, short video clips, and music. I simply want to take a picture and either zoom in from the full shot or zoom out to the full shot. This is so basic and yet I can't find how to do it with iMovie08. Ken Burns only seems to allow me to select a small section of the photo and pan to a another section. Please help. I'm so desparate that I'm considering borrowing a Windows laptop and downloading Photostory. If this is not possible with iMovie08, could you suggest another program? Ultimately, the whole thing will run about 20 minutes and I want to put it on a DVD for general viewing. Help!

    Yes. iMovie will not add the black border so that you can fully zoom a portrait photo in Ken Burns. You can add the black border yourself in a tool like Photoshop. Or if you are familiar with Automator, there is an Automator Action called "Pad Images" which will do this.

  • Photomerge in PS CS (v.8): how to zoom out?

    I use Photoshop CS (v.8.0) on a Mac G4 (PPC) with OS X 10.4.11.
    When I use Photomerge and get to the screen in which my two (or more) images can be joined, I see the zoom-in tool (and this works perfectly well) but I cannot find either a key-combination for zooming out again, or a tool to do this. The online Photoshop 'Help' pages seem to talk about a zoom-out tool, but I imagine the 'Help' pages may be for later versions  of Photoshop.
    I should be grateful for any instructions for zooming out.

    Thank you, both respondents. I had tried both those ideas before posting in this forum — or so I thought. Command-'minus' does not work. But I now realize that when I tried Option-zoom, what I did was hold down Option and click on the image instead of holding down Option, clicking on the zoom tool and then clicking on the image. Thank you again. Problem solved.

  • How to zoom out to see entire project?

    I can't zoom out far enough using the zoom slider to see the entire project.
    Anyone know of a way I can do it?

    Thanks for your help, it's a shame that there's no Overview view to see the whole project.

  • How to zoom out on apple tv

    My apple tv screen is zoomed in and won't fit properly on my tv. How do I zoom it back to fit the screen?

    Welcome to the Apple Community.
    The Apple TV doesn't have any zoom controls, it's one of your TV settings that is causing this. (Assuming you aren't watching older 4:3 content of course)

  • HT1338 screen zoomed in, how to zoom out

    Hi
    All of my information no longer fits on to my screen.  For example, in the top RH corner, where the time and my name is, I need to use my mouse to scroll across my screen to see all of the information.
    Can anyone tell me how I can resolve this so that all of the information fits back on to one screen?
    Thanks

    Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
    (68110)

  • How do I go back a page on the Ipad mini? I do not see any arrows anywhere. Also when I go to my yahoo email account and open an email I can not find how to go back and log out. This is our first Ipad and it is very different frm android. Thanks

    We just purchased our first Ipad. It is a mini with retina display 16 GB. How do I go back a page? I see no arrows to page back. Also when I log into  a yahoo email account and open an email I see now way to log out? Thank you for any help

    In Safari, (the web browser), there are specific arrows to go back and forward through website pages.
    In other Apps, it will depend on how the App is built.
    As to Yahoo Mai it depends on where you are viewing the email.  If you are using the Mail App, then you don't log out.     The Mail accounts in the Mail App are always there.
    If you are using the Yahoo App, You can Tap on the folder at the top, then on your account/name, and then on Sign Out.

  • How do I restore and carry out maintenance on external drives

    Under OS9 I used to regularly carry out optimising and maintenance on my mac and external hard drives. Now that I'm on OSX, I can't use Norton Utilities - that doesn't seem to work at all. Techtool Pro doesn't seem to fix external hard drives connected by firewire. Neither does Diskwarrior. How do I do maintenance for my mac and my drives. I have an external LaCie 160GB porsche firewire drive - that seems to have stopped working but I can't carry out any serious diagnostics as I have nothing that seems to work - DiskUtility doesn't carry out a full test and comes back with errors. I also have a Formac Oxygen 160GB external drive connected by Firwire which has also recently stopped working (when I mean stopped working, I mean that the mac no longer sees all the files I have stored on the drive and asks me if I want to initialise the drive - to which I obviously say no). I need to access the files on these external drives but can't get the mac to do this. Any help?

    Hi Naz,
    Norton Utilities does not work with OS X -- in fact it often makes problems worse. I fear NU has corrupted your external drives' directory structures.
    * Remove Norton: How to manually uninstall Norton SystemWorks for Macintosh 2.x.
    * Boot from your install CD/DVD and run Disk Utility. Repair Disk for the external drives. If DU can't repair, you can attempt DiskWarrior (it DOES work on external drives).
    Good luck; let us know how it goes.
    John

  • How can I sort and break out a boxed set download

    I recently downloaded one of iTunes' full compilations - various artists, 75 songs in total.
    There was also an option to buy smaller sets of these at about 20+ songs per individual set, but I went for it all.
    Maybe this is too anal, but I was hoping to burn the 75 onto audio CDs in their order/mix of the smaller sets that iTunes had offered. I don't see how I can do that since all I have is 75 songs added to my library on a certain date with no other useful identifier to help segregate them. The track listings and disk # listings apparently only refer to each song's original artist's album (not the iTunes compiled albums).
    This box set isn't offered anymore - at least I can't find it (Valentine's Day - Complete Box Set) so I can't tell how the songs were broken out into their smaller sets.
    Am I asking for too much, or is there a way to sort these in their intended order that iTunes had set up?
    15 FP iMac 800mhz   Mac OS X (10.3.9)   1gb RAM; 60gb intl/250gb extl HD
    15 FP iMac 800mhz   Mac OS X (10.3.9)   1gb RAM; 60gb intl/250gb extl HD
    15 FP iMac 800mhz   Mac OS X (10.3.9)   1gb RAM; 60gb intl/250gb extl HD

    I was mainly looking for an easier way of setting up separate playlists to burn the CDs and not have to select & drag individual songs myself manually. The way they're listed now in my iTunes library is alphabetically by song name, even if I sort by "Date Added".
    As for their original order, I've seen iTunes sell compilations like these in subsets such as: "Starter Set", "From Deep in the Vault", "Rarities" or similar categories. If the Music Store had a sales reason to segregate them into specific albums, I assumed (incorrectly) that they would stay in their own 'Albums' once I downloaded them all at once.
    Guess I'll just start dragging songs A thru Z over to new playlists and call it good. I appreciate the reply.
    15 FP iMac 800mhz   Mac OS X (10.3.9)   1gb RAM; 60gb intl/250gb extl HD

  • How to fade in and fade out buttons ???

    Hi guys I am building a website and I need help to fade in/ fade out buttons. Here is an example :
    My main goal is that when I roll over the services button, I want the submenu (corporate and weddings) to fade in. Then when I roll over the portfolio button, I want the first submenu (corporate and weddings) to fade out and the second submenu ( clients, corporate, weddings, etc..) to fade in and to stay like this. Finally when I roll over testimonials, the second submenu fades out. And so on for the rest of the buttons.
    FYI, i know how to animate the buttons to fade in/out but i dont know how to make them fade out when i roll over the other buttons.. I know this can be done with action script but I have no clue how...
    I have attached my fla and swf.
    http://www.habouryentertainment.com/files/site09_help.fla
    http://www.habouryentertainment.com/files/site09.flw
    Your help would be greatly appreciated !!!
    Thanks

    Some things you just have to take the time to unravel and learn.  It's not difficult/complex, you just have to avoid letting the code overwhelm you by its appearance... instead of looking at pages, look at one page at a time, line by line... take your time and follow a tutorial.
    People make tutorials to help those that need to learn, so there's no reason for anyone here to reinvent those wheels for every person that comes along.  If you are looking for someone who'll hand you your solved design, sorry, I'm not that guy.

  • How to fade in and fade out an image (on png.) that is above the film layer?

    I want to add an image on a movie, but fading in and out. I'm using a png. image. Thank you!

    You are able to either;
    1. apply at transition on the clip, or
    2. use key frames to animate the opacity values.
    let us know how you go.
    Tony

  • How to put in and get out (format and procedure)​the calibratio​n constants to/from EEPROM?

    I am trying to have an 'E-Series Factory Cal' and 'E-Series User Cal'. I want to be able to select/make my own calibration constants (user cal) and use them in the calibrating procedure. Does anyone have an idea on how to do something like that? I need to know how to pass these new calibration contants to a function (and which function), how to get them out, and what format do these constants need to be in.

    Yuliya,
    Consult the E series manuals. I have found them to be very useful for finding information of this sort. Unfortunately for you, it has been a long time since I have used E series cards, and don't remember the calibration procedures offhand. I do know that there are a lot of cal VIs in the DAQ palette that should be VERY helpful.
    Sorry I couldn't be of more direct assistance.
    Good luck

  • How to Darken Sky and Bring Out Clouds?

    These are Nikon RAW files. How do I enhance contrast of a bland sky to bring out clouds?
    Please be specific about tools, adjustment bricks and sliders.
    (my first stab at adjustments, following 2 months of learning how to import/name files in AP)

    How do I enhance contrast of a bland sky to bring out clouds?
    Do you only want to enhance the contrast or also add some color?
    Bland skies can be tricky, because they will usually be overexposed as well.
    So the first thing to try would be the "Recovery" slider in the "Exposure" brick to darken the very light sky.
    Then use the "Enhance" brick to apply "Definition". It will emphasize any structure, that is available in the clouds.  And perhaps add a bit of "Vibrancy", depending on your taste and mood.
    This will give moderate results like this: See before and after, from left to right:
    These settings can be applied to the whole image. For more dramatic results, you will need to brush in adjustments selectively onto the sky area - contrast, color, or curves.
    See my next post

Maybe you are looking for