How to zoom in Survey mode?

Suppose I have 6 photos tiles in "Survey" mode.
How do I do a simultaneous zoom and pan, so zooming in on one photo zooms all the other ones, and dragging one photo drags around in the others?
Zooming in on one photo loses the tiling effect of "Survey" mode, making it impossible to do a side-by-side comparison.
Since the tiles are basically large thumbnails in size, it seems that there is no way to do a zoomed-in comparison in "Survey" mode.

Well, Jay is correct, although you can do something like it...sorta. If you use "Compare" mode instead of Survey, you will initially see two panels showing just the first two images from the ones you wish to "survey". Then you can click (or use slider) to zoom (with synchronization) both the "select" and "candidate" images; and finally-- by use of the arrow keys-- you can see your additional images appear, sequentially, in the "candidate" panel. So you essentially get a zoomed pairwise survey. Not really what you want, but...
Phil

Similar Messages

Zooming in Survey Mode is not sharp

I'm using LR 4.1. When in survey mode, if I select an image and hit Z the resulting 1:1 image is not sharp. If I zoom in or out and back to 1:1 it becomes sharp. This is not a problem in Loupe mode. It's not a delay issue - it never becomes sharp unless I change the zoom level. I have 1:1 and standard previews pre-generated.
Any ideas?
Thanks,
Larry

As are as I know, I didn't have 1:1 previews for this image. I know I wasn't in Loupe at 1:1 with this image in this session either. When I first went into Survey mode and zoomed to 1:1 the image was pixelated, but I had the "Loading..." message appear at the bottom. After about 5 seconds the 1:1 preview was built and displayed the sharp image.

Zoom in Survey Mode

It would be quite useful to be able to zoom the image reslolution in survey mode the same way we can in compare mode.
This would speed, among other things, the ability to scan a group of images at the same time at 1:1 resolution to eliminate those that are fuzzy.

Still no zoom in survey as of LR3 (unless I missed it - please correct me if I am wrong). Still think this would be a nice, time-saving feature.
Jeff

How can i enable retina mode in new PS 13.1

Hello guys!
I have macbook pro retina 15. And i update my photoshop to 13.1 But when i open document in 100% zoom all so little and in 200% all so blurry. How i can enable retina mode in new photoshop or i want to draw all layouts x2? Thank you!

And now i will create templates with x2 resolution (x2 zoom will in none retina displays) and for another people (who will write html code after my template) templates will be very big and uncomfortably for use.
And another problem is support my current projects, wich i strat on non retina display, know i can draw on 100% zoom and so small or on 200% zoom and so blur )
Please say man, this is big problems?) I thought that adobe will create non-retina emulation in this version...

Blurry images when zooming in Survey & Grid View

When I am in Survey View and hit the Z key, some of the previews are blurry. The same thing happens in Grid View. However, in Loupe View, the images are fine when I the 'Z' key. Using Survey View would make things go faster when making my picks. Any ideas why this happens?
I tried rendering 1:1 but the returns a mesage that says renders are up to date and rendering was done.

cppasm wrote:
This is definitely a bug. I can see it too, and it's little bit annoying. LR 4.1, Win7 x64.
To reproduce just select two images, render 1:1 previews to be shure they are present.
Then press 'N' to switch to Survey mode, and now press 'Z' to zoom in active photo.
It gets zoomed, but looks like LR zooms in standard (smaller) preview instead of using 1:1 preview - the result is blurry and a little pixelated, it definitely lacks resolution.
But when in the Loupe view (switch view using 'E') and zooming all work just fine - the image is at full resolution and is sharp.
And even if I switch from Survey to Loupe with zoomed in image - it still stays blurry.
To get sharp image I need to zoom out and then zoom in again.
So in short - it looks like 1:1 preview is used only when image is zoomed in from the Loupe view.
At least others seem to experience the same thing so I know it's not just me. I'd say it's more than a little bit annoying because it causes you to second guess yourself and you constantly have to switch to a view to see if the image is actually sharp or not. It really slows down the workflow.

Survey mode: Advance multiple images keystroke??

Hi All,
I have requested this feature since Version 1 beta, so I'm hoping that maybe it has showed up in LR v2 and I've missed the conversation here thus far.
Example: I have multiple images opened up in 'Survey' mode, let's say 4 mages. Which on my Apple 23' Cinema Display makes for much nicer size reviewing, than the largest 'Thumbnail' setting.
The basic ability to hit a combo-keystroke, and advance all the frames at once in 'Survey' mode, to the next set of images of that same total. You know, same as 'page up' or 'page down' in the thumbnail view in the Grid.
Now, I know IiView Media Pro could do this several years ago, before Microsoft turned it into 'Expressions Media', with 4 images at a time. And like I said, I've been requesting it since early LR beta 1. You know, just add a 'Shift' to the Page Up/Down function keys. Or 'Option' or "Control' key.
So, have I missed this feature? I've been exploring the keyboard tonight and found that 'Shift and 'Option' will get you variations on multiple or extra images, as they did in LR 1. But you still can't advance them as a group to the next set of , like I said 3,4, 5 or 6 images at a time. I've tried keyboard-adds with the Page Up/Down buttons, but got nothing there either. This is pretty cool on monitors larger than 20" or so.
I love the Survey mode, but surely we can advance a half-dozen images at a time, instead of adding or subtracting one image at a time.
Hoping there's an 'Shortcut' here I've missed. :)
Thanks
-Sol

Hey Wolf,
As I mentioned, I have, at least twice since early 'LR beta 1' asked for this feature. It's crazy that the feature isn't there. As I mentioned, in Expressions Media (going back to iView Media Pro), not only does it allow up to four images to completely fill your screen, regardless of screen size, but they will advance to a new set of images, all at the same time. And it also allows you to zoom up to four images at the same time. As LR does in the 'Compare' mode.
I will re-post this over in the 'Feature Request' section, but like I said, I was hoping it had been added as a keystroke combo in LR 2, and that maybe I had just missed it.
Thanks for responding.
-Sol

Rating now different in Lr6 Survey Mode. Why is this happening?

After updating to LrCC / Lr6 I'm unable to rate images like I could before.
In Lr5 my cull method was to pull ~10 images together in survey mode (N) and give each image either 1 star for 'reject' or 2 stars for 'keep'. With capslock on every time I give an image a rating it automatically advances to the next image. It was a FAST system for me. Now in Lr6 I give one image a rating and ALL the images in that group get the same rating. NOT useful. Any ideas on why that's happening now?

Stealth can cause problems. These alerts may be normal, and would otherwise be no problem, except that you're running stealth. You will block/log many things that most networks just need to do.
That being said...
I'd recommend changing all security settings on this router that was unsecured for so long...who knows how much control this nosy neighbor has taken. (Why would anyone run an unsecured WiFi network in a neighborhood where they can see their neighbor? Think about it.)
Bluetooth broadcasting 800 ft? Google for the answer to that.
"not hip to...intervention"? huh?
It's your network, and you're responsible for it.
You should probably reset this AEBS to factory standards and get the security locked down snug (using a cabled connection) before you put it back on the air.
Change the SSID, change the admin password, etc, etc.
This neighbor sounds like he's taken advantage of your hospitality for the last time.

Survey Mode Bug?

After shift clicking a group of images in Grid mode and then entering Survey Mode, I try to flag one photo as picked or rejected, but it does it to all of the photos versus just the one photo that is highlighted. This wasn't occuring a few weeks ago but now it is. I'm wondering if this is a bug with the new update? I saw a reference to it on another blog:
http://feedback.photoshop.com/photoshop_family/topics/lr_4_1_bug_reject_a_photo_in_survey_ mode
I'm hoping it's just something that I've toggled on by mistake so that I can get back to using the survey mode effectively to cull my photos. Thanks for your assistance.

Any idea how this could have been triggered on?
They are independent, but have the same keyboard shortcut - and the buttons look similar. Perhaps you accidentally activated it in loupe mode (loupe mode can look very similar to develop in overall GUI layout).
P.S. There is an idea in the feedback forum to make enabled autosync more visible: http://feedback.photoshop.com/photoshop_family/topics/autosync_multiple_target_indication

Moving from Survey Mode to Compare Mode

If I am in Survey mode, looking at (for example) 5 photos, I notice that the Toolbar has a button for Comparing 2 of the photos. I know how to get one of the images (it's the one with the narrow white border) for the Compare mode, but I can't seem to figure out how to select the other image. Any ideas? CTRL-click (Windows) on an image removes it from Survey mode.
BTW, this is a cool feature that allows one to quickly A/B images while in Survey mode.
Paul

I don't think you can do what yu want from Survey. Another way to judge images though is to start in compare 'C' with the first image in a series of images you would have put in Survey in a Collection or Quick Collection. The 'Candidate' image will then be the next in line. You right arrow to each of the next images you want to compare to the initial select and uo arrow when you come to one you like better than the initial select and keep going to you go through theyhttree or more images in the Collection.
Will this get you what you want?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

HT3775 how can i convert a mod file (on vlc) to mp4 to work on quicktime

how can i convert a mod file (on vlc) to mp4 to work on quicktime
when i connected my video camera and imported the videos, they're default is to play on vlc
they are mod files
i want to edit the videos on imovie and for that the videos need to be mp4 and open in quicktime player
what do i do

iPhone supports
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
If your video is supported, drag it to iTunes and sync it to your iPhone.

HP Phoenix 8-core - how do I get XP Mode to work in Windows 7 64-bit?

My Computer: HP Phoenix 8-core, 12 GB Ram, over 1,000GB hard drive space, Win 7 SP1 with current updates. Downloaded and installed the following: Windows XP Mode with Windows Virtual PC, the hotfix MS provided for AMD multicore, and the MS Hardware-Assisted Virtualization Detection Tool which informed me that my computer does have hardware-assisted virtualization. I have done EVERYTHING Microsoft has advised.
How do I get XP Mode to work?

Frank, thanks for the help. That Microsoft article is the one I read yesterday morning. I again just now went into the BIOS as follows: Security, System Security-Data Execution Prevention AND Virtualization Technology were both enabled. So I saved changes and exited. My computer is running Windows 7 Professional 64-bit.
This is my system information:
OS Name   Microsoft Windows 7 Professional
Version   6.1.7601 Service Pack 1 Build 7601
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name   HPPHOENIX
System Manufacturer   Hewlett-Packard
System Model   h9-1100z
System Type   x64-based PC
Processor   AMD FX(tm)-8150 Eight-Core Processor, 3600 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date   AMI Ang_716, 4/5/2012
SMBIOS Version   2.7
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   United States
Hardware Abstraction Layer   Version = "6.1.7601.17514"
User Name   HPPHOENIX\Debbie
Time Zone   Eastern Daylight Time
Installed Physical Memory (RAM)   12.0 GB
Total Physical Memory   11.8 GB
Available Physical Memory   10.2 GB
Total Virtual Memory   23.6 GB
Available Virtual Memory   21.7 GB
Page File Space   11.8 GB
Page File   C:\pagefile.sys
I downloaded and installed the Windows XP Mode. The
I downloaded and installed the Windows Virtual PC. (not the 2007 version-tried that the first time and seen it did not work).
I applied the "fix" for AMD motherboards.
I just tried to install XP Mode again--I got almost to the end, the I got the following error message in a rectangle box:
"Windows XP Mode-Windows Virtual PC
Could not complete Setup. Please try again."
The has happened over 7 times. Yesterday evening before I posted on this forum, I uninstalled, deleted everything, restarting the computer after doing each step, went to website yet again, redownloaded everything again, and tried to install once again. Still the same message. Any help or advice is certainly needed and appreciated. Debbie

I want to set a maximum size for pictures when FF shows websites. How can i do that? NO I DONT MEAN "HOW TO ZOOM".

I have FF 34 but this problem has been there for a lot of earlier versions. On many webpages there are pictures that cover my whole screen, and I want to set maximum size for showing images on webpages.
I ONLY wanr to change the maximum size of the images, AND IAM NOT asking about how to zoom the webpage.

Do you want to hide large images or merely make them smaller by setting a max-width and max-height?
You would probably have to use JavaScript (bookmarklet) to achieve this reliably.
There are bookmarklets to make large images fit in the window to avoid a horizontal scroll bar
You can try this code in the userContent.css file (adjust the max-width accordingly).
*http://kb.mozillazine.org/userContent.css
<pre><nowiki>img { max-width: 1024px !important; height: auto !important; }</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userContent.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userContent.css file in the editor window
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userContent.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userContent.css.txt file

How can I use Safe Mode to troubleshoot in Windows 8 or Windows 7?

QuestionHow can I use Safe Mode to troubleshoot in Windows 8 or Windows 7?
AnswerWindows has a special mode known as Safe Mode. It is not fully functional, but it allows you to make changes to the laptop to hopefully fix normal mode. We're going to attempt to boot into Safe Mode to use it fix the laptop.
For more information on how to boot into Safe Mode please see the following articles:
How To: Safe Mode and other Advanced Startup Options in Windows 8
Creating a System Repair Disc for Windows 8 (useful for entering Safe Mode)
How To: Start your Windows 7 computer in Safe Mode
Use Safe Mode to undo recent changes
When a computer won't start Windows, it's usually due to a recent change. If you installed a new piece of software before your laptop began to have trouble booting, you may want to uninstall it. Similarly, if you recently made a change to any system settings, you may want to change it back. If you have antivirus software, you may want to perform a scan. If you're not sure what to do here, feel free to skip to the next step!
Use Safe Mode to perform a system restore
Windows includes a utility called System Restore that can help with many problems. While this won't alter or remove any of your personal files, it will roll back your system settings and files to an earlier date. We'll use this to attempt to fix Windows.
To learn how to use System Restore, please check the following articles:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
How To: Perform a system restore in Windows 7
Use Safe Mode to initiate a clean boot
As Windows loads, it loads many additional components such as services and startup items. Some of these are not vital. For example, some tools start immediately with Windows, such as antivirus software. From Safe Mode, we can instruct Windows not to load many of these. This will help you determine if one is causing Windows not to load properly. Note that this step is more advanced than the previous steps. If it seems difficult for you, you may consider asking for help from someone who is more comfortable with computers.
Please view the following article for more information:
How can I perform a clean startup without my startup items to troubleshoot a problem?
If Windows loads normally, you'll know one of those startup items or services was causing the problem. If this is the case, you may want to return to the System Configuration Utility and re-enable some items and services to determine which specific one caused the problem.
Backing up your data
If you're able to enter Safe Mode, backing up your data should be easy. Connect a USB flash drive or external drive to your computer while in Safe Mode and then copy your important files to the flash drive or external drive.
You may also want to consider taking your computer to a professional.

Would love to know if this is possible. Found forums dating back years asking exactly the same thing, no solutions. And I do not want to change my headset (Sennheiser MM-50), or use the onboard mic (which sounds like you are using your Mac in a wind tunnel once the fans kick in).

How to Zoom in and Out on PDF files in Safari?

Safari help is not helpful since it gives inaccurate information on how to Zoom in and Out on a PDF file that has opened in Safari. The help says to control click the page and choose the zooming level you desire. However control clicking the PDF file in Safari brings up a save page box. I tried some of the other keys with clicking and they did not work. Thanks in advance to those who helped me save a PDF file to the desktop so I can view in Preview.- But often I just need to be able to zoom in to read the tiny text that is displayed.

Thanks for getting back to me-
the website I am trying to zoom into a PDF on is:
http://www.beedocuments.com/software/Timeline/screenshots.html
I click on one of the screenshots- it loads into a safari window.
When I control key click on the image- a pop up menu comes up asking me to save the image to deskotp- add it my image library and 2 other save options. No zoom in or Zoom out. I only have an apple pro mouse and my track pad- so right clicking isn't an option.

How to enable single window mode?

*how to enable single window mode in the latest version of Safari?*
browser opens up some links in new windows and it is very inconvenient
Message was edited by: wolfxr

All that you describe is the standard setting them I have long found, but they do not bring any results. What is interesting - parameter "TargetedClicksCreateTabs" in a state of "true" which is processed in the Mac version, broken in the Windows-based version if it is to register the file C: \ Program Files \ Safari \ Safari.resources \ Defaults.plist a file stored in the folder C: \ Documents and Settings \ Admin \ Application Data \ Apple Computer \ Preferences \ com.apple.Safari.plist scrambled to change it theoretically impossible, but if you replace it with THIS file, then it can be set, but the parameter "TargetedClicksCreateTabs" still not working

How to zoom in Survey mode?

Similar Messages

Maybe you are looking for