How toggle among "Don't Save", "Cancel", and "Save" buttons with keyboard?

When a dialog box comes up, how do I toggle between, like, "Don't Save", "Cancel", and "Save" via my keyboard? I.e. I don't want to have to click with the mouse if different than the highlighted choice.
Thanks.

HI,
Try here: http://forums.macworld.com/message/392463
Carolyn

Similar Messages

  • How can i don't save a flash file for a temporary internet files

    i already use html file in meta tag...
    but still saving file ..
    so how can i don't save a flash file for a temporary internet files??

    i don't understand.
    post your message in your native language.  i can use the forum translation tool to (usually) understand your question.

  • How can we make the save button active in standard toolbar in outout of alv

    Hi experts ,
    I am using factory method to print alv with oops .
    Cancel , Exit and Back button are active by default in Standard tool bar  in output of Report , But Save button is not active , How can i make that save button active .
    Also Pls tell me how i can make editable to the cell in output , 
    My Code is like this :
    cl_salv_table=>factory( IMPORTING r_salv_table = gr_table CHANGING t_table = ispfli ).
      gr_functions = gr_table->get_functions( ).
      gr_functions->set_all( abap_true ).
      gr_display = gr_table->get_display_settings( ).
      gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
      gr_display->set_list_header( 'This is the heading' ).
      gr_columns = gr_table->get_columns( ).
      gr_column ?= gr_columns->get_column( 'CITYTO' ).
      gr_column->set_long_text( 'This is long text' ).
      gr_column->set_medium_text( 'This is med text' ).
      gr_column->set_short_text( 'This is sh' ).
      gr_column ?= gr_columns->get_column( 'CITYFROM' ).
      color-col = '6'.
      color-int = '1'.
      color-inv = '0'.
      gr_column->set_color( color ).
      gr_sorts = gr_table->get_sorts( ).
    *gr_sorts->add_sort( 'CITYTO' ).
      gr_sorts->add_sort( columnname = 'CITYTO' subtotal = abap_true ).
      gr_agg = gr_table->get_aggregations( ).
      gr_agg->add_aggregation( 'DISTANCE' ).
      gr_filter = gr_table->get_filters( ).
      gr_filter->add_filter( columnname = 'CARRID' low = 'DL' ).
      gr_layout = gr_table->get_layout( ).
      gr_layout->set_key( key ).
      key-report = sy-repid.
      gr_layout->set_save_restriction( cl_salv_layout=>restrict_none ).
      gr_table->display( ).
    Rgds,
    Premraj

    Hi,
    1)you need to give the function code to that save in the Function Keys of that screen from the GUI Status.
    2) while filling the field catalog of that field you need to put the        
    wa_fieldcat_edit-edit = c_x.
    i.e use the edit and append to that field catalog internal table.
    for more infomation you can refer to below links:
    problem with alv edit and save
    *Edit* and *Save*  for the selected records in ALV
    solves your problem
    Thanks!!

  • How can you add your own print and export buttons to the CR viewer toolbar?

    I posted a previous question that was asking how to get around the Information Bar in IE7 when you export and print.  Unfortunately the CR viewer file download code gets blocked by IE7 because the buttons don't directly download the file.  However, I have been able to get a regular button that calls the following code and streams the file to the client and IE7 does not block it. 
    Sub PrintPDF(sender As Object, e As System.EventArgs)
         Dim crReportDocument as ReportDocument
         Dim crExportOptions as ExportOptions
         Dim crDiskFileDestinationOptions as DiskFileDestinationOptions
         Dim Fname as string
         CrReportDocument = New ReportDocument()
         CrReportDocument.Load(Server.MapPath("estactionlist.rpt"))
         Fname = Server.MapPath("./") & Session.SessionID.ToString & ".pdf"
         CrDiskFileDestinationOptions = New DiskFileDestinationOptions()
         CrDiskFileDestinationOptions.DiskFileName = FName
         CrExportOptions = crReportDocument.ExportOptions
         With crExportOptions
              .DestinationOptions = CrDiskFileDestinationOptions
              .ExportDestinationType = ExportDestinationType.DiskFile
              .ExportFormatType = ExportFormatType.PortableDocFormat
         End With
         CrReportDocument.Export()
         Response.ClearContent()
         Response.ClearHeaders()
                    Response.AddHeader("content-disposition", "attachment;filename=test.pdf")
                    Response.ContentType = "application/pdf"
                    Response.Charset = ""
                    Response.WriteFile(Fname)
                    Response.Flush()
         Response.Close()
         System.IO.File.Delete(Fname)
    End Sub
    So here are my questions?
    1. Is it possible to add a custom print control/icon to the CR viewer toolbar?
    2. If one is not possible, then is it possible to override the CR viewer print and export buttons with your own subroutines like the one above?
    I just want my page to look nice and hate to have print and export buttons outside of my CR viewer. 
    Thanks,
    Kevin

    It might be possible to replace the buttons in a windows app since you can retrieve the toolbar as a toolbar object in the winform viewer  ( ToolStrip toolBar = (ToolStrip) crystalReportViewer1.Controls[3]; )  however with a web app, it's a lot more difficult.
    The problem is that that you need to parse the Request string to try and figure out if the print / export button was clicked.  The code below makes the print button disappear if you click it, so you should be able to modify it to call your custom printing / exporting code instead  (You have to do this check in a postback)
            Dim I As Integer = 0
            If Request.Form.AllKeys.Length > 0 Then
                For I = 0 To Request.Form.AllKeys.Length - 1
                    Response.Write(Request.Form.Keys(I).ToString & "<BR>")
                    If Request.Form.Keys(I).ToString = "CrystalReportViewer2:_ctl2:_ctl2.x" Then
                        CrystalReportViewer2.HasPrintButton = False
                    End If
                Next
           End If
    Shawn

  • Cancel and OK button reversed?

    In iTunes for Windows, version 12.1.10.71, in the Get Info widget, the Cancel and OK buttons have exchanged place. I am not exactly sure which version I ran before this one, but I am a regular updater.
    This seems to me a change just to annoy regular users.
    Any comments?
    TIA,
    Bart Zorn

    This illustrates the inconsistency - Get Info window from iTunes 12.0:
    and from iTunes 12.1:
    Among the other layout changes, the OK and Cancel buttons are reversed.

  • How do you delete incorrect cover art and replace it with the correct cover art?

    How do you delete incorrect cover art and replace it with the correct cover art?

    Select the song and open the "Get Info" window (Cmd + I or File > Get Info).  Select the artwork tab.  Select the artwork and click the "Delete" button.  Use the "Add" button to select the replacement art or just drag it into the window.  Click "OK" to save your changes.

  • A family member has given me her iPhone. How do I delete her Apple ID and replace it with my own

    A family member has given me her iPhone. How do I delete her Apple ID and replace it with my own ?

    Any Apps that have been downloaded with her Apple ID will remain Tied to that ID...
    You should consider doing a Restore as New and start over with your ID...
    Connect the Device to the iTunes library on your Computer, click on the Device tab that appears in iTunes and click Restore.
    http://support.apple.com/kb/HT1414

  • Cancel and Exit button not working

    Dear Experts,
    <u>Cancel and Exit button not working</u>
    I am calling a screen from inside a report program
    using SET SCREEN 9000.
    2 of the date fields(start date end date)
    on this screen are Mandatory.
    I am not able to Come out of this screen 9000 using
    CANCEL or EXIT button
    without giving a date entry in both of
    Mandatory fields (start date end date).
    Can someone help me with a solution?
    Appreciate your valuable help;
    Points assured
    Thanks,
    Aby Jacob

    Hi..
    To avoid this problem you have to use AT EXIT-COMMAND Module.
    1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
    2. In the PAI of the Screen Call this module.
       MODULE EXIT_SCREEN AT EXIT COMMAND.
    3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
       MODULE EXIT_SCREEN  INPUT.
           CASE OK_CODE.
          WHEN 'EXIT' .
                LEAVE TO SCREEN 0.
          WHEN 'CANCEL'.
          ENDCASE.
       ENDMODULE.
    This will surely work.
    <b>reward if Helpful.</b>

  • How to find PG.xml file name and path associated with a FUNCTION

    Hi,
    I am having a function:IRC_VIS_HOME_PAGE with Web HTML value as below:
    OA.jsp?akRegionCode=IRC_VIS_HOME_PAGE&akRegionApplicationId=800&OAPB=IRC_BRAND
    How to find PG.xml file name and path assoicated with above funtion.
    Thanks,
    ashok

    Ashok,
    Function IRC_VIS_HOME_PAGE will have 2 parameter defined for it which are OASF and OAHP where
    OASF=<SelectedFunctionName> - this tells the Framework to select this function in the given "Home Page" menu context.
    OAHP=<HomePageMenuName> - this is used ONLY with the OASF parameter, and it is used to establish the current menu context. It should point to a "Home Page" menu.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • 'Cancel' and 'OK' buttons in the LOV screen switch places randomly

    Hi!
    While running Oracle Forms and invoking the LOV ,'Cancel'
    and 'OK' buttons in the LOV screen switch places randomly.Has
    anyone encountered this before? Is there a way to fix this.
    Thanks in advance.

    I know that the find/ok/cancel button order is different between
    running in client/server and on the web.
    Are you testing your form both ways and seeing the different
    order or are you running into something different?
    Candace Stover
    Forms Product Management
    Oracle Corporation

  • How do i have CC on home and work computer with same account?

    How do i have CC on home and work computer with same account?

    Hi Markofm,
    You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    If you install on a third computer, it will request you to De-activate on the other two computers.  You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
    If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription.  This is the same licensing between which we have for our perpetual product.  An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
    Thanks & Regards,
    Sanjeeta

  • When i open settings, the ok, cancel and help button is gone

    My buttons is gone. When i open settings in firefox or anything else. A box appears but, the ok, cancel and help button, isn't there. it's just a tiny rectangle where they used to be. And when i click on them, nothing happens :S
    == This happened ==
    Every time Firefox opened
    == 17 june, 2010

    [img=http://i.imgur.com/hRGpb.png]Picture of the problem[/img]

  • After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

    After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
    EtreCheck version: 1.9.15 (52)
    Report generated August 30, 2014 at 6:56:41 PM EDT
    Hardware Information: ?
        iMac (21.5-inch, Mid 2011) (Verified)
        iMac - model: iMac12,1
        1 2.5 GHz Intel Core i5 CPU: 4 cores
        4 GB RAM
    Video Information: ?
        AMD Radeon HD 6750M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ?
        OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
    Disk Information: ?
        ST3120026AS disk0 : (120.03 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted>: 209.7 MB
            Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ?
        Apple Inc. FaceTime HD Camera (Built-in)
        CHICONY USB NetVista Full Width Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ?
        Apple Inc. thunderbolt_bus
    Gatekeeper: ?
        Anywhere
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [running]    com.arcsoft.eservutil.plist Support
        [running]    com.bjango.istatmenusdaemon.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [running]    com.sophos.autoupdate.plist Support
        [running]    com.sophos.configuration.plist Support
        [running]    com.sophos.intercheck.plist Support
        [running]    com.sophos.notification.plist Support
        [running]    com.sophos.scan.plist Support
        [running]    com.sophos.sxld.plist Support
        [running]    com.sophos.webd.plist Support
    Launch Agents: ?
        [running]    com.arcsoft.esinter.plist Support
        [running]    com.bjango.istatmenusagent.plist Support
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.sophos.uiserver.plist Support
    User Login Items: ?
        Macs Fan Control
        Firefox
    Internet Plug-ins: ?
        FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
        Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 7 Update 67 Check version
        Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins: ?
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
        CUDA Preferences  Support
        Fan Control  Support
        Flash Player  Support
        Java  Support
    Time Machine: ?
        Time Machine not configured!
    Top Processes by CPU: ?
             1%    WindowServer
             1%    fontd
             0%    firefox
             0%    SystemUIServer
             0%    SophosWebIntelligence
    Top Processes by Memory: ?
        229 MB    firefox
        156 MB    SophosScanD
        152 MB    InterCheck
        131 MB    com.apple.IconServicesAgent
        115 MB    SophosAntiVirus
    Virtual Memory Information: ?
        424 MB    Free RAM
        1.53 GB    Active RAM
        1.37 GB    Inactive RAM
        699 MB    Wired RAM
        1.26 GB    Page-ins
        0 B    Page-outs

    I'd start by getting rid of the following software responsible for these extensions.
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper
        2. AppDelete
        3. Automaton
        4. Hazel
        5. AppCleaner
        6. CleanApp
        7. iTrash
        8. Amnesia
        9. Uninstaller
      10. Spring Cleaning
    For more information visit The XLab FAQs and read the FAQ on removing software.
    Be sure to remove your two Login Items. Finally do this:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • How do I create a save button to hide a dropdown and pass on the dropdown data to a label?

    Hi InDesign Scripting Experts!
    I'm desparetly looking for some help to get this issue resolved.
    Essentially I've a lot of PDF forms that've been designed by using InDesign CS4 and then converted to an interactive PDF via Adobe Lifecycle. The final 2 page PDF form has multiple textfields, a drop down and a save button. The users partially fill-in the form, select their name from the dropdown and then hit the save button prior to sending the PDF form to the client.
    The Save button does the following:
    - Passes on the data from the drop down to a label
    - Hides the drop down and
    - finally, hides itself ('Save' button)
    I understand InDesign CC has a lot of the Livecycle capability built-it. Hence I'm trying to design the inteactive PDF within InDesign CC. The textfields, dropdown etc. are easily done. The part that I'm stuck on is to get the 'Save' button to perform the above listed tasks.
    Any help will be greatly appreciated.
    Cheers

    Elizabeth,
    Presuming that editing the exisiting BOSTON is not an option, you may:
    1) Create a nostroke/nofill rectangle that covers all all word, then give it a white fill;
    2) In the Transparency palette flyout tick Make Opacity Mask with Clip unticked and Invert Mask ticked.
    That should remove the BOSTON from sight so you can retype it.
    You could use a black fill and leave Invert Mask unticked (if the black is black enough).

  • How can you remove the Save button on a survey?

    What options are there to remove the SAVE button from a SharePoint survey?
    I need to remove this if possible, I was hoping it would be as simple as editing a form in the Survey list... but that is apparently not the case.
    I need to supress the SAVE button as it confuses end users and we don't want any half completed surveys. Either it gets finished or not at all.
    Can someone hopefully provide me with an nice simple solution?  Or any solution at all :)
    Thanks!

    Hi,
    Save button on the surveys with multiple question or with branching logic enabled is an out of the box feature and it is by design.
    If you want to remove the “save” button in a survey, I think you can use JavaScript to hide this button:
    1. Open your site in SharePoint Designer.
    2. Open your survey list newform.aspx page, in the code view, find this code “<asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server"> <table>……. </table> “add the JavaScript” </asp:Content>”, add JavaScript before the “</asp:Content>” tag:
    <script>
    var x=document.getElementsByTagName("input");
    for (var i=0;i<x.length;i++)
    if (x.item(i).type=="button"&&x.item(i).value=="Save")
    {x.item(i).style.display = "none"};
    </script>
    After this, you will not see the “Save” button when create new survey response. You can also add this JavaScript in the editform.aspx page.
    Hope it can help you.
    Xue-Mei Chang

Maybe you are looking for