How Tou2026 Create Custom Menu within BPC NW - OPENFILE issue

Hi Guys,
I built a custom menu in BPC 7.5 using the step-by-step procedure available in u201CHow Tou2026 Create Custom Menu within BPC NWu201D. It uses the OPENFILE option with EvMnu to open dynamic templates describing this limit:
The OPENFILE option within the NW Version can only open workbooks from cached directories in local PC. Therefore, it is a best practice to ensure that OPENFILE only refers to templates that are available as dynamic templates that are cached (updated template version) on all client PCs that are using the EvMnu based workbook.
At the moment Iu2019m working with more than 40 users, which surely will increase. So, I have to find others solutions or automate the local saving:
- Do I have to ask our users to save locally all dynamic templates?
- Do you know if I can save automatically (not manually one-by-one) all dynamic templates in all client PCs allowing the OPENFILE option to work correctly?
- Do you know if there are others solutions, like commands or macro (not BPF), to open dynamic templates from custom menu without local saving?
Thanks for your answers.

Hi Nilanjan,
Thank you for your quick answer. I need to open a single dynamic report for each link, not the complete report folder.
OPENWEBFOLDER works correctly, but unluckily it doesnu2019t cover my issue.
OPENWEBFILE could be the solution, but it doesnu2019t work. I used this syntax: 
=EVMNU("OPENWEBFILE"," optional text ","REPORTS\TestReport.xlt")
Clicking it, the system shows this message u201COPENWEBFILE: macro not supportedu201D.
Do you know if OPENWEBFILE works correctly in BPC 7.5 NW?
Thanks for your support.
Edited by: D-Mark on Sep 16, 2010 4:21 PM

Similar Messages

  • How Tou2026 Create Custom Application in E-Commerce 7.0?

    Hi all,
    We want to set up SAP E-Commerce for ERP 7.0. For SAP E-Commerce for ERP 5.0 the following configuration guide is available:
    How Tou2026 Create Custom Application in E-Commerce 5.0
    What about SAP E-Commerce for ERP 7.0? Is this guideline also valid for 7.0?
    If not, where can I find the corresponding configuration guideline for SAP E-Commerce for ERP 7.0 (on the SAP Service Marketplace?)?
    Thanks in advance.
    Regards,
    AV

    Hello Av,
    Please see the Development and extension guide @
    http://service.sap.com/crm-inst
    => Release 7.0
    => Operate
    Regards
    Mark

  • Labview - How to create custom menu bars, drop down menus, pop ups etc.

    Hi,
    I have  a very naive question. How does one create menu bars with custom labels (not NIs defaults), drop down / side menus, pop ups etc.?
    Thanks in advance
    Paul

    Search for the following on the NI website: Run-Time Menus, Run-Time Shortcut Menus.
    For pop ups, search for 'dialog' in the Examle Finder (Help -> Find Examples)
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • How to create custom member in excel BPC report?

    Hi Everyone,
    Hope you are doing good!!
    I have bit confusion on custom member and how to create custom member in excel bpc report.
    Can you please explain me on this with example.
    Thanks,
    Amit

    Hi Amit,
    Take look at below thread might be helpful for you.
    Refer page no 206
    https://help.sap.com/businessobject/product_guides/boeo10/en/EPMofc_10_user_en.pdf
    and
    Best Practices For Reporting Against SAP Business Planning and Consolidation (Powered by SAP HANA), utilizing the EPM Ad…
    Hope this will help you

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to create custom content placeholder in sharepoint 2013

    Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
    Thanks,
    Johnweb

    Hi,
    If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder 
    <asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
    <asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
    I suggest you provide your basic requirement for further research.
    If you want to customize a master page, the Rajendra's method would be helpful.
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to create custom adapter for Products and CommerceService

    Hi guys!
    First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
    Unfortunately it doesn't go in details enough...
    I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
    But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
    As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
    Also I guess I need to add MyProductAdapter somehow  so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
    Product product = productResource.adaptTo(Product.class);
    I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
    Cheers
    Kostya

    Hi Kostya,
        Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
    Thanks,
    Sham

  • How to create custom report in crm 2013

    Hi,
    I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
    is an example of display record

    Hi Aamir,
    Have a look at below link it shows step by step how to create custom SSRS report.
    http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
    It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
    Thanks,
    Prasad
    Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

  • How to create custom report plugin using child region report metadata

    Hi,
    I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
    Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
    metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
    render according to the child report attribute.
    Is there anybody here had ever done this?

    Hi Nicolette,
    Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
    Start from determining column heading, column order until finish rendering the report. The same way how apex
    render the classic report.
    Previously this imy my rendering process:
    FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                         P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                         P_VALUE  IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
        VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
        VCOLCOUNT       NUMBER;
        VCOLNAMES       VARCHAR2(2000);
        VAJAXIDENTIFIER VARCHAR2(100);
        VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
        VJSCODE         VARCHAR2(32767);
      BEGIN
        VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT  => 'select * from s_emp',
                                                        P_MIN_COLUMNS    => 1,
                                                        P_MAX_COLUMNS    => 999,
                                                        P_COMPONENT_NAME => P_REGION.ID);
        VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
        FOR I IN 1 .. VCOLCOUNT LOOP
          VCOLNAMES := VCOLNAMES || '{name: "' ||
                       UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
        END LOOP;
        APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
        RETURN VSQLHANDLER.COLUMN_LIST;
      EXCEPTION
        WHEN OTHERS THEN
          APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
          RAISE;
      END GETCOLUMN;
    So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
    i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
    on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
    the normal apex rendering process but this is what i want to achieve.
    I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
    same columns alias, column ordering and column  conditional display.
    Thanks,
    akulala

  • How to create a Menu for PeopleSoft HRMS application program ?

    Folks,
    Hello. I am developing PeopleSoft HRMS application program for a client. I have created 10 components. But I don't understand how to create a Menu on the left handside for users to access the components. The Menu's structure is as follows:
    Folder Root containing Folder1, Folder2.
    Folder1 containing Folder1a, Folder1b.
    Folder2 containing Folder2a, Folder2b.
    Folder1a containing Component1, Component2.
    Folder1b containing Component3, Component4.
    Folder2a containing Component5, Component6, Component7.
    Folder2b containing Component8, Component9, Component10.
    The Folder Root should appear in the Menu on the left handside. A user can reach Compoent1 by clicking
    Folder Root -> Folder1->Folder1a ->Component1.
    Can any folks tell me how to create such a hiearachical Menu ? Thanks.

    Folks,
    Hello. Thanks a lot for replying to me. By using PeopleTools->Portal->Structure and Content Reference, I have created the hierachical folder groups:
    FolderRoot containing Folder1 and Folder2
    Folder1 -> Folder1a -> the link to a Component
    Folder1 -> Folder1b -> the link to a Component
    Folder2 -> Folder2a -> the link to a Component
    The above hierachical folder groups have appeared on the left handside under "Menu" and work correctly.
    But when click on "FolderRoot", "Folder1" and "Folder2" don't appear under "FolderRoot" on the right handside of the screen. When click on "Folder1", "Folder1a" and "Folder1b" don't appear under "Folder1" on the right handside of the screen.
    I have checked PeopleTools ->Portal -> Structure and Content Reference's folder administration, there are no places to type in information to have children folders appear under its parent folder on the right handside of the screen.
    My question is :
    How to make children folders appear under its parent folder on the right handside of the screen ?

  • How to create custom(or) user defined component in SAPTAO

    Hi,
       Please provide me some document or steps on how to create custom component in sap tao.
    Thanks a lot in advance.
    Regards,
    Sudha

    Hi,
    If you want create any custom components, you should use SAP QTP to create it.
    Here are the simple steps:
    i) Go to QTP -> Click on New - > Select Scripted Component - > ((Select SAP_Doc) area (i.e. whatever application area you have created for SAP TAO installation)) -> Record or Write a script based on your requirement & save
    ii) Go to QC -> BPT -> open above component and insert the parameters and call these values in QTP script level (either way you can do)
    iii)  Create a datasheet and declare the parameters in datasheet and call this sheet whenever you have required.
    Good luck.
    Ram

  • How to create file menu in the swing?

    How to create file menu or any menu in the swing?
    Please help me.

    How to create file menu or any menu in the
    swing?
    Please help me.By file menu, do you mean where you can choose a file to open or save to? If so, have you had a look at the File Chooser component? If not, please click on the link in the previous sentence to the Sun tutorial.
    Good luck
    /Pete

  • How we create custom infotype and how to configure with its subtypes.

    hai abap-hr gurus,
    how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
    plz help me for this with an example code.
    thanks..
    kiran kumar

    Hi Kiran,
        Please fallow the below steps to create the custom infotype. If you have any quires let me know.
    For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
    then select the `Employee Infotype' radio button
    after that select the `PS Structure Infotype'
    then click on Create… A separate table maintenance window appears
    then Create a PS structure with all the fields you want on the infotype
    Save and Activate the PS structure
    now Go back to the initial screen of PM01
    Click on `All' push button. It takes a few moments
    Click on `Technical Characteristics’. Infotype list screen appears
    Click on `Change'(pencil) button
    Now select your Infotype and click on `Detail' (magnifying glass) button
    Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
    Give your subtype field as subtype field & Save and come back to PM01 initial screen
    Click on `Infotype Characteristics' … Infotype list screen appears
    Click on `Change' (pencil) button & on New Entries
    and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
    to fill yours). Now save ur entries
    Now the Infotype is created and ready to use.
    If you want to change the layout of the Infotype as per your
    requirement…
    In the PM01 initial screen…Select `Screen' radio button and give
    2000 as the screen name, then click on edit.
    In the next screen.. Select `Layout Editor' and click `Change'.
    Screen default layout appears…here you can design/modify the
    screen..change the attributes of the fields..etc.
    Save and activate. (Don't forget to `Activate at every level)
    Regards,
    Ramakrishna kotha.

  • How to create customized F4 Help of InfoObject in BW

    Hi, buddies
    Does anyone know how to create customized F4 help for an InfoObject?
    What I need to do is when user clicks F4 help on the variable screen of query, only certain master data values should be displayed, not all of them.
    Currently, I can only make setting in InfoObject to restrict the F4 value either in master data or in Cube. I couldn't create a customized F4 value list.
    Thanks,
    Wei

    Hi,
    i have H4 Help problem.
    how can i restrict an attributes of infoobject in H4 Help value.
    Please help me
    Madhu

  • How to create custom calendar in webdynpro ABAP.....(WDA)

    Hi,
    How to create custom calendar in Webdynpro Abap ?.
    Regards,
    Narasimha

    The best way I see here is to develop your custom calender in any of the UI technologies supported like Flash (flex) or HTML5 (or maybe even SilverLight? not sure) and embed it in your WD view. You can also handle interactions between the embedded component and the WD controller.
    Regards,
    Raghavendra

Maybe you are looking for