How tp print all on 1 page
i found an old dialogue on how to print portrait and landscape but how do i print the are onto 1 page?
Beth,
I'm just guessing that you may be getting some blank pages when you print because this is a common problem for people switching from Excel. Excel doesn't try to print empty rows and columns. If it did, it would take a ream of paper every time since the blank "sheets" are so large. Numbers makes the assumption that you have deleted any unneeded rows and columns before trying to print because it's a What You See is What You Get application when it comes to printing.
An alternative to changing the scale in Numbers, as Wayne helped you with, is to do it in Preview. If you Print to PDF and choose to Open PDF in Preview, you can Print at any scale from Preview.
Jerry
Similar Messages
-
How can i print all the tab pages not just the first page (tab)
how can i print all the tab pages not just the first page (tab)
You would need to do this programmatically. Here's one way:
Attachments:
Example_VI_BD6.png 3 KB -
How to print all columns in one page
Hi,
Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
Can anyone explain me how to print ALL COLUMNS IN ONE PAGE .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
Edited by: kotha123 on Oct 11, 2010 5:58 PMHi,
Your best bet is to use a workbook template or else Excel to pdf option...Thanks -
I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?
You can use printPages(1, 5), however I need to know how you print current page.
-
my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.
Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
How to print an envelope in pages 5.0
How to print an envelope in pages 5.0
I'm away from my computer right now but I believe there is a template for that.
Click New, select new from template, it should be there...
Alexis -
How to get all previous versions page contents and other field values of a publishing page using SharePoint Client Object Model 2010?
Thanks,
OsmitaHi Osmita,
Greetings.
Here are the links that helps you. It has code attached to it.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a0d2ab40-99ba-4368-8505-1dc559ef6469/get-content-of-previous-version-of-page-sharepoint-2010?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/faaf419f-997e-4150-9911-48cc375c3b46/how-to-get-previous-published-versions-of-publishing-pages-in-sharepoint-2010?forum=sharepointdevelopmentprevious
Please remember to click 'Mark as Answer' on the answer if it helps you -
How to export all the man page in mac to PDF?
How to export all the man page in mac to PDF?
I have tried "man -t cat | pstopdf -i -o ~/Desktop/cat.pdf" but this only output one page.
How could I dump all the man pages to pdf with one or few command as possible?
The other question is, I copy all the man pages form /usr/share/man, they are .gz.
After I unzip them and open with less, texteidtor, ultraeditor, all the formate are weird.
Is there any tool could open them with the right formate as man does?
I know the man in linux uses the tool "less" to read man pages. How about mac???I use Bwana. Copy all and paste into TextEdit. Then, save it. This is the beginning for diskutil:
diskutil(8) BSD System Manager's Manual diskutil(8)
NAME
diskutil -- Modify, verify and repair local disks.
SYNOPSIS
diskutil [quiet] verb [options]
DESCRIPTION
diskutil manipulates the volume-level structure of local disks. It pro-
vides information about, and allows the administration of, the partition-
ing scheme of disks, optical discs, and AppleRAID sets.
VERBS
Each verb is listed with its description and individual arguments.
list [-plist | device]
List disks. If no argument is given, then all disks and all
of their partitions are listed.
If -plist is specified, then a property list will be emitted
instead of the normal user-readable output. If a device is
specified, then instead of listing all families of whole disks
and their partitions, only one such family is listed. In that
case, specifying either the whole disk or any of its slices
will work. The -plist and device arguments may not both be
specified at the same time. -
How to print all the pages in wad
HI i am having a report with 3000 records when opened in wad, but when we print the Report, it is giving us records(60) on only first page, how do we print all the 3000 records from all the pages by clciking on print only once.
Thank You,
Kris.i am not able to print any pages after inserting the code, am i placing the code in the right place.
<HTML>
<!-- BW data source object tags -->
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DATAPROVIDER_2"/>
<param name="DATA_PROVIDER_ID" value=""/>
DATA_PROVIDER: DATAPROVIDER_2
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DATAPROVIDER_1"/>
<param name="QUERY" value="ZPARAMTEST"/>
<param name="INFOCUBE" value="ZEMPPRM"/>
DATA_PROVIDER: DATAPROVIDER_1
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_PROPERTIES"/>
<param name="TEMPLATE_ID" value="ZEMPPARM"/>
TEMPLATE PROPERTIES
</object>
<td>
<table class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td nowrap>
<table border="0" cellpadding="0" cellspacing="1"><tr><td nowrap class="SAPBEXBtnStdIe4">
<A class=SAPBEXBtnStd title="Print via Web Button" href="<SAP_BW_URL cmd="PROCESS_HELP_WINDOW" help_service="ZPRINTING" item="GR1Table">" target=_blank><nobr> Print</nobr> </A>
</td></tr></table>
</td></tr></table>
</td>
<td width="100%"> </td>
</tr></table>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft DHTML Editing Control">
<TITLE>BW Web Application</TITLE>
<link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
</HEAD>
<BODY>
<P><object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="EMPLOYEE_TABLE"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="BLOCK_SIZE" value="5"/>
ITEM: EMPLOYEE_TABLE
</object></P>
</BODY>
</HTML> -
How to print all pages using ALV from CL_SALV_TABLE?
Dear friends,
I have a report which displays a dynamic internal table using CL_SALV_TABLE. The display format is normal list.
And since this dynamic internal table is big, I have divided it into a sub internal table which displays 10 columns in one page at one time. And each page is displayed using a customized button that I set as MyFunction.
The problem is, when I click List->Print or Ctrl-P, the system will only send to spool the current page even though in the Print dialog box, I choose Print All option.
Is there a way to rectify this? Thanks.Hi,
Try this..code...the above FM expects purchasing organization..revised code below mentioned..
please try..
DATA: kdy_val(8) VALUE '/110'.
SET PARAMETER ID 'LIF' FIELD 'VENDOR'. " Pass the vendor
SET PARAMETER ID 'KDY' FIELD KDY_VAL.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
Thanks
Naren -
How to: Print table on first page, use second page (back) for text only
Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but only on Odd pages.
On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
We are on ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
Two pages were created for the content area's:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
What actually happens is that the item table also gets printed in the content area for the Condition text...
Also the "Conditions" are not printed on the last back page. But only once before it...
Cheers,
Edwin.Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
- Odd/Even: Odd (Front) Pages
- Placement: First page (In page set)
2. FrontPage (For Odd pages)
- Odd/Even: Odd/Front Pages
- Placement: Rest of Pages
3. BackPage (For Even pages)
- Odd/Even: Even (Back) Pages
- Placement: Rest of Pages
4. LastPage
- Odd/Even: No Odd/Even Restrictions
- Placement: Last page (In page set)
5. DummyPage
- Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin. -
How to print the top of page part along with the ALV list and generate PDF
HI all,
I have created one ALV by using oops concept .
and also am able to get the top of page where I have One standard logo on the right hand side
and some details on the left side .
Now my requirement is to while printing the list the logo and other top of page details should appear
In the PDF output but currently while am pressing the print preview button only the alv data is coming
am already using the method
handle_top_of_page
FOR EVENT print_top_of_page
OF cl_gui_alv_grid,
may be am missing something ... How to get the top of page along with the logo printed ?Hi Surya,
After generating the grid display click on print button,
a spool number is generated. capture the spool number and convert it to pdf using the fm:
CONVERT_ABAPSPOOLJOB_2_PDF and save the file
Hope this will solve your problem.
Regards,
R K. -
How to print all data in a table?
Hello!
I am doing report with VC. Now I want to print data ,The system action "print" can not print all data,only a page in the table can be printed. Are there any ways to finishe the print function,Can you help me?
Thank you very much!See this how to guide I put together:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123 -
How to print report in jsp page?
excuse me,i am new to jsp
may i know how to pritn report in jsp page or html?
tqhere is a hacked up example.. i ripped out a lot, so it may not compile, but you get the idea... the full version is really long and not much new info.. just all awt/display stuff...
package rowe;
import javax.swing.*;
import java.util.*;
import java.awt.*;
import java.awt.image.*;
import java.awt.event.*;
import java.sql.*;
import utility.*;
import java.awt.print.*;
public class rowePrint extends JFrame implements ActionListener, Printable{
String printType = "";
static JButton j = new JButton("Print");
FontMetrics fm;
String jID, promotion, product, jComments;
public void getInfo(int jid) {
ResultSet rs;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection("jdbc:odbc:rowe");
Statement stmt = conn.createStatement();
rs = stmt.executeQuery("select j.id as jID, j.comments, p.title as pTitle, p.product, p.packagingCartonCost, p.foldingQuarterCostPerM, p.foldingQuarterCostPerM, j.customizationOption as setupFee, p.perMcost, p.qtyCarton, d.name as dName, d.contact as dContact, d.email as dEmail, d.address as dAddress, d.city as dCity, d.state as dState, d.zip as dZip, d.phone as dPhone, d.fax as dFax, r.name as rName, j.totalQty, j.orderIn, j.estFreight, j.miscCost, j.coverSelection, j.imprintSelection from jobs j, promotions p, dealers d, reps r where j.promotion = p.id and j.dealer = d.id and j.rep = r.id and j.id = " + jid);
rs.next();
jID = rs.getString("jID");
jComments = rs.getString("comments");
promotion = rs.getString("pTitle");
product = rs.getString("product");
} catch (Exception e) {
System.out.println("getinfo: " + e);
public void actionPerformed(ActionEvent e) {
if (e.getSource() instanceof JButton) {
wookie();
public void wookie() {
PrinterJob printJob = PrinterJob.getPrinterJob();
Paper paper = new Paper();
PageFormat page = new PageFormat();
paper.setImageableArea(0, 0, 600, 780);
page.setPaper(paper);
printJob.setPrintable(this, page);
try{
//printJob.pageDialog(page);
// if (printJob.printDialog()) {
printJob.print();
} catch (Exception e) {
System.out.println("wookie1" + e);
public static void main(String[] args) {
rowePrint at = new rowePrint("Invoice");
at.getInfo((new Integer(args[0])).intValue());
at.drawShapes();
// at.wookie();
public void drawShapes() {
setBounds(0, 0, 670, 550);
addWindowListener(new WindowAdapter() {public void windowClosing(WindowEvent e) {System.exit(0);}});
j.setBounds(10, 10, 10, 10);
j.addActionListener(this);
getContentPane().setLayout(null);
getContentPane().add(l);
getContentPane().add(j);
show();
public rowePrint(String s){
printType = s;
public void paint(Graphics g) {
g.setFont(new Font("Serif", Font.BOLD, 18));
g.drawString(promotion, 20, 30);
g.setFont(new Font("SansSerif", Font.PLAIN, 4));
g.drawString("" + new java.util.Date(), 20, 37);
g.setFont(new Font("Serif", Font.BOLD, 21));
g.drawString("Rowe Furniture", 440, 35);
g.fillRect(440, 40, 145, 25);
g.setColor(Color.white);
fm = g.getFontMetrics(new Font("Serif", Font.BOLD, 21));
g.drawString(printType, 512 - (fm.stringWidth(printType) / 2), 60);
public int print(Graphics g, PageFormat pf, int pi) throws PrinterException {
if (pi >= 1) {
return Printable.NO_SUCH_PAGE;
paint(g);
return Printable.PAGE_EXISTS;
} -
IPhoto How to print multiple photos per page.
How do I print multiple photos on one page using iPhoto 10.5.1?
You've done it in the past - but not with iPhoto '11 version 9.5.x
with iPhoto '11 version 9.5.1 (there is no version 10.5.1) the only way to print multiple photos per page is as I explained - and going back to a [revious is not an option as previous versions will not run under OS X 10.9.3 and previous versions can not read the library after it is upgraded to version 9.5.x
the way you do it is
For now a work around is to duplicate the photo in iPhoto (this does not increase disk storeage requirements) and print multiple copies at once
To print 4 you must make 3 duplicates and select them and print all four
LN
Maybe you are looking for
-
Sharing Library with Multiple Users on SAME COMPUTER
My wife and I use Windows XP Pro. We imported all of our CDs to the iTunes on her user account. How do I access or import the library to the iTunes on my account? I want to avoid logging into her account to listen to the music. The help index has inf
-
My internet connection is fairly slow. When I start more than one download at a time, they appear to stall. When I start one at a time, waiting for the previous to finish, the total time is much less. How do I stack up several requests at once and ha
-
Slackware to Arch server switch questions
I want to have this setup, with all PCs running arch: http://img.photobucket.com/albums/v637/ - SYSTEM.jpg I currently run NTL and the modem has a eathernet port on it so its all easy and good with my slackware server DHCP on one network card and fix
-
Re-installed songs on computer, now can't access them
I recently needed to restore my computer to factory settings, so I moved my iTunes library to an external hard drive, restored my computer, and re-installed my iTunes library on my computer. However, I cannot use any of the songs because iTunes now c
-
Problem with MIME repository (cannot find image with ReportDesigner)
Hi, in our BW (BI7.0), on the SE80 (mime repos), i found the /SAP/BW/CUSTOMER/images i found the *jpg and other image files. But when i run the BEX Report Designer and try to add an image from that path, the BRD doesnt find any image. Tks CC