How Transformations or Routines will work for the NLS Archived data in BW on HANA?

Hi,
I have archived data from BW on HANA system into NLS IQ.
Now I'm creating a Transformation or Routines, in this case how the archived data will be read without writing any ABAP Code.
Thanks & Regards,
Ramana SBLSV.

Hi Ramana,
May be i will try to explain with 2 cases. hopefully one of this will be your case:-
DSO1 -> you have archived this DSO.
Case 1:-
Now you want to load from DSO 1 -> DSO2 (direct transformation)
so here , you question is while loading from DSO1 to DSO 2 ,will  the archived data also  be loaded to DSO 2?
if so, there is a  infoprovider property you need to change for this
  In extra-> infoprovider properties -> change-> Near line usage switched on (by default it is off).
so, the archived data also will be used in this case.
Case 2:-
you are loading from DSO 3 to DSO2. lookup on DSO1.
so in lookup DSO1, you need to use archived data as well?
In this case, you have to use the Read from DSO rule type. this will access from both active table and NLS data.
Let me know if this is not the case with you?
Regards,
Sakthi

Similar Messages

  • Is there such a modle of iPhone 4S, that will work for the following?

    I have read a couple discussions here, yet 99% of them are talking about using Verizon / Sprint's iPhone 4S on AT&T, or another way.  I'm not finding an answer of my simple question, that is, I want to get an iPhone 4S, which works for CDMA (if not both, at least Verizon), AT&T, T-Mobile, and GSM outside the US.
    What would be the right way to get one?  I ran into problem because I know:
    - An iP4S obtinaed from CDMA (Verizon / Sprint) could be SIM unlocked but only works for GSM carrier outside the US. WIll not work for AT&T or T-Mobile.
    - An iP4S purchased contract-free will work for AT&T, T-Mobile, and GSM outside the US, but not CDMA.
    - An iP4S obtinaed from AT&T, works in AT&T only, the SIM and CDMA cannot be unlocked.

    Thanks for you all above to clarify my question.  One last question here. 
    Taking GSM out of the discussion, can a Verizon iPhone 4S be used in Sprint?  Or if I switch from Verizon to Sprint, I simply have to sell my Verizon iPhone 4S and buy another 4S under Sprint, even they are mechanically identical and the only difference is how software profile is applied?

  • How does attribute change run works for Aggregates and Master data?

    Hi
    Can anybody xplain how does the attribute change run works for Master data ?
    For e.g.
    There is 0spelling and it has master data
    On Day 1 there are 10 records
    day 2 it has 12 records
    so with attribute change run this 2 new records will get added....
    The values for this  12 records will added seperately in Data load
    Is this how it workss
    So how about Aggregates which has Master data.????

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • I get no wireless signal in my home, so need a network extender for the Lumia 2520.  Specs indicate LTE FDD network:Band 20 (800MHz), Band 3 (1800 MHz), Band 7 (2600 MHz). Does Verizon offer a network extender that will work with the Lumia?

    I get no wireless signal inside my home, only outside, so I need a network extender that will work for the Lumia 2520, Specs indicate it uses LTE FDD netork Band 20 (800MHz), Band 3 (1800MHz), Band 7 (2600 MHz).  Does Verizon offer a network extender that will work with the Lumia 2520?

    We want to make sure you get service in your home Astromandata! I can check your area to see if you qualify for the network extender. What's your zip code? If it does qualify than you will be able to use it for your Lumia to support your voice services. Find out more information here: http://spr.ly/6585fNlt Is anyone else having this issue?
    AmberF_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • HT201272 If I go through "Purchased", how will it work for the ones I completed my album & single is no longer available?

    Over the years, I've purchased 425 albums (2312 songs total).
    I'm upgrading my hard drive, and was wondering how it worked for the 'Purchased' section. If I bought an album with "Complete My Album" and the 'Single' I got in pre-orders (or whatever) is no longer available for purchase, will I get it with my entire album download? Or will I have to go back & re-purchase that song? (considering I notice if the song is missing at all)
    (If my rambling makes any sense) Does anyone know? or is this something I should ask Customer Support?

    Go into iTunes store on computer. On the right hand side under quicklinks select Purchased. You can redownload any of those songs for free as long as you have authorized your computer. Just click the little cloud, or "download all"

  • Am considering buying a Time Capsule.  But all specs I read about it (re: printing) is how to hook up a printer via USB connection.  Need to confirm...that a wireless printer will work with the router feature of the Time Capsule.  I assume yes...?

    Am considering buying a Time Capsule.  But all specs I read about it (re: printing) is how to hook up a printer via USB connection.  Need to confirm...that a wireless printer will work with the router feature of the Time Capsule.  I assume yes...?

    A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
    The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
    Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

  • How MS/MRP  and Oracle ASCP will work for Manufracturing for a Item 'PEN' .

    Hi All,
    I am having oracle MS/MRP and Oracle ASCP.
    I want to manufrature item as PEN. All items are buy items
    Can any one tell here how MS/MRP & ASCP will work to manufrature a pen.
    What will be the flow of these 2 modules?
    Thanks,
    Edited by: user11362919 on Jul 9, 2009 1:11 AM

    Hi
    If I understand your qn correctly you are asking about a writing pen ?
    Lets say it has parts like pen body,refill,top and cap all these items will have ''buy souricng rules''.
    Based on demand for the end item ''Pen'' AsCP will explode BOM for the Pen and suggest supplies as planned orders for the components , which can be converted to Std PO or BPA release automatically. All that MRP module could be of use to you is to define Forecast demand for the item.
    Best Regards
    Partha

  • Does anyone know if the scanner function will work for an Epson Workforce 840 aio printer using Mountain Lion 10.8.2?

    Does anyone know if the scanner function will work for an Epson Workforce 840 aio printer using Mountain Lion 10.8.2?  How is the compatiblity generally speaking?

    Hi,
    The Epson Workforce 840 do support scanning on Mountain Lion via Apple Image Capture.
    You may find the steps to configure the scanner by following the ICA Scanner Driver section below:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=168363&infoType=Dow nloads&platform=OSF_M_X8
    Regards,
    Shlomi

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the thief logs out of iCloud. Would we able to locate the macbook?

    I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
    It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
    Thanks,

    If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
    Unfortunately, there's no other way to track the phone other than through Find My iPhone.  You could call your carrier and see if they would blackliste it so at least the theif couldn't use it.

  • I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

    I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

    Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
    G5 PCIe options are listed here:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

  • Will the Apple Digital AV adapter work for the DISH Remote Access app?

    I have a Sling adapter hooked up to my 722K DISH receiver, and the DISH Remote Access app installed on an iPad 2. Great app, btw.
    What I'd like to know is if I'll be able to use this AV adapter to watch my recorded shows on a TV. Hotel room situation, and I would just like a larger screen every once in a while.
    So far, my understanding doing some searches here is that the adapter will work for Netflix, but won't for HBO GO (bummer).
    Since I'll be phasing out Netflix soon anyway, and this adapter isn't going to work for HBO GO content, I am just wondering if it will for the Dish Remote Access app before I bother to buy one.
    If not, is there something that would be a better choice? I did look at the component and composite cables too, but couldn't quite make up my mind.
    Thanks for any input.

    iphone4 dont support mirror so only apps which support the normal tvout will work on iphone4 witht he hdmi out setup

  • I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    The description says it all.    I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    Hi Normanwh,
    If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Regards,
    - Brenden

  • My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    Basic troubleshooting techniques for any problem
    Restart the computer = joy?
    Reset the router = joy?
    Restart the computer in Safe Mode = joy?
    ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
    ÇÇÇ

Maybe you are looking for