How Transport Screen 0111 of User Exit MM06E005 from Development to Quality

Hi Gurus,
Greetings!!!
I have implement a Screen Exit MM06E005 for my PO Requirement (ME21N, ME22N, ME23N).
I am able to see the added screen details in my Development Client
However, after transporting the request to Quality, I am unable to see the screen.
When I check in Quality I got the details as 'the screen does not exist in quality'.
In development Server I checked that the screen is in Package ME and not in my Transport request.
Please let me know how to transport this screen(0111) to the Quality Server.
Thanks in Advance.
Regards,
Renwa.

Hi Denny,
You please check this below things.
1) Check the screen is activated or not
2) May be you activated the screen and placed in different transport request
3) Deactivate all and keep then in another transport request and transport.
Regards,
Madhu.

Similar Messages

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

User exit MM06E005 - Customer fields in purchasing document

Hi,
I am using user exit MM06E005 - Customer fields in purchasing document to validate the line items in PO and display the value at header level.
My requirement is when the user enters the line items and press enter the validated value should get populated at header level.I had included a tab (customer tab) in that the value should get displayed.
likewise for each and every line items the value should keep on changing.
And
I the field that i had added at header shows the value during the save but once we come out and enter again,it is not displaying the same.
Regards
Manoj

Hi,
Indeed the exit which you have specified MM06E005 comprises the enhancement for customizing fields and screens associated with it. may be you might not have activated the screen associated with the exit. the screen might have been created but missed while activating.
Regards,
Jagath

How to find a correct User-Exit

Hi All
      I need to make changes in the user exit and there are many user-exits in the standard program here my question is how to find the correct user-exit which suits our requirement.
Thanks
srini

run this program by giving ur t code...and click the exit it will go to SMOD there u read the documentation of that exit..if ur requirement satisfies try to use that one..
REPORT ZUSEREXIT.
*report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : devclass like tadir-devclass.
parameters : tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
                  and object = 'PROG'
                  and obj_name = tstc-pgmna.
move : tadir-devclass to devclass.
if sy-subrc ne 0.
   select single * from trdir where name = tstc-pgmna.
   if trdir-subc eq 'F'.
     select single * from tfdir where pname = tstc-pgmna.
     select single * from enlfdir where funcname = tfdir-funcname.
     select single * from tadir where pgmid = 'R3TR'
                        and object = 'FUGR'
                        and obj_name eq enlfdir-area.
     move : tadir-devclass to devclass.
   endif.
endif.
select * from tadir into table jtab
               where pgmid = 'R3TR'
                 and object = 'SMOD'
                 and devclass = devclass.
select single * from tstct where sprsl eq sy-langu and
                                  tcode eq tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
      20(20) tcode,
      45(50) tstct-ttext.
skip.
if not jtab[] is initial.
   write:/(95) sy-uline.
   format color col_heading intensified on.
   write:/1 sy-vline,
          2 'Exit Name',
         21 sy-vline ,
         22 'Description',
         95 sy-vline.
   write:/(95) sy-uline.
   loop at jtab.
     select single * from modsapt
            where sprsl = sy-langu and
                   name = jtab-obj_name.
     format color col_normal intensified off.
     write:/1 sy-vline,
            2 jtab-obj_name hotspot on,
           21 sy-vline ,
           22 modsapt-modtext,
           95 sy-vline.
   endloop.
   write:/(95) sy-uline.
   describe table jtab.
   skip.
   format color col_total intensified on.
   write:/ 'No of Exits:' , sy-tfill.
else.
   format color col_negative intensified on.
      write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first   screen.

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find out all user exits edited

Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AM

Hi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM

How can I find the USer Exit...

Hi,
How can I find the USer Exit...
I need to do changes for this User Exit :EXIT_SAPLKEII_002
In which T-code I can open this Exit
Ex: Go to some Transcation code and then give the name of the Exit ato access this Exit
...any sugesstions will be apprecaited!
Thanks & Regards,
Kittu

Hi,
the EXIT : EXIT_SAPLKEII_002 is the exit,in this SAPLKEII is the standard Program.Copy this program and go to transactio SE38 and press Enter and then go for the option Where used list and check the check box Transaction. It displays the possible Transactions that the Exit triggers
Regards,
Vijaya Lakshmi.T

How to code the user exit userexit_number_range from mv45afzz

Hi, i need to modify the user exit userexit_number_range from mv45afzz, this is an standard include so when i try to modify i get the request for the my access code.
Can someone explain me what is the procedure to modify an user exit.
Do i need to request an access code to modify this user exit.
am i complete lost in the proces of coding user exits?
i have already check many of the message posted.
thank for advance

Hi
MV45AFZZ is a customer user exit to add customer functionality....so when u change first time..you need to provide access key...for the object...
Take a Print screen of the screen displayed and send it to basis guy..who can provide you with access key for that object..then u can enter that value and modify the user-exit...
To add your code into this user-exit...u need to place the cursor in the routine u want to change..and press Insert button on the Tool bar... which will open up space for u to enter the code...
Thanks
Balu

How to transport the data contains in the table from development to product

How to transport the data contains in the table from development to production.
Please let me know ASAP.

Hello Dilip
Create a workbench request and add the following entries to the request:
Object key: R3TR TABU <name of z-table>
For this object add the following value key:
- client-independent table: '*'
- client-dependent table (e.g. client 100): '100*'
See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
Regards
Uwe

Hierarchy transport from developement to Quality?

Dear SDN,
Hierarchy transport from developement to Quality.
I have created one balance sheet Hierarchy on 0Account infoobject.
Could you please tell me how to transport hierarchy from development to Quality.
Waiting for response.
Thanks & Regards,
Kiran

Hi Kiran,
Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
since you have done manulally you can do the same in other systems also, but you need authrizations to maintain manually
I have manually created my balance sheet hierarchy using RSH1 transaction code.
you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
Regards
Daya Sagar

Transporting Report from Development to Quality

Hi,
1. I need to transport Report & Custom Data Source from Development to Quality System. Please help me about procedure & prerequisites .
2. When I search a report from Business Analytics--> Design Reports . I need Hide some reports. Do we have any such possibility ?
Regards,
Rohit

Rohit,
As Eduardo said there is a possibility to Assigned to a Work center a way to make Reports visible to users. But from 1405 we can control the Visibility of Reports as per business role as well.
Please follow steps below to make this feature available:
1) Go to "Administrative Analytics Settings" configuration element.
2) Check the check box of " Allow the assignment of Business Roles "
This will show one more Business role Tab when you are trying to assign the reports.
Please see image for details.

Transport the created Storage Bin Automatic from develop to quality LS10

Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
Marta

I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much.

How Transport Screen 0111 of User Exit MM06E005 from Development to Quality

Similar Messages

Maybe you are looking for