How tro create a Internal and External repository?

Hi Gurus,
I am new to KM can someone tell me what is the prerequsities for creating Internal and External Repository?
and give me the steps for creating Internal and External repository?
Thanks in Advance,
Dharani

Hi Dharani,
Refer this link:
http://help.sap.com/saphelp_nw70/helpdata/en/69/d96b7da84611d5993600508b6b8b11/content.htm
regards
Parth

Similar Messages

TEM How to diffrentiate b/w internal and external events

Hi experts,
How do i distinguish b/w internal and external events ? When i try to create an event always by default it shows as internal in the top right above planned and firmly booked radio buttons. How do i create an external event which is held outside the company ?
please help...
Thanks & regards,
Pavan

Hi Pavan,
If you create a business event with resources, it is automatically considered an "internal" event -as you cannot plan resources OUTSIDE of your company-.
If you create a business event w/o resources, than system gives you the option of internal/external selection.
Regards,
Dilek

How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

Dear Experts,
I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.
The registered domain name is e.g. contoso.com.
a. What should I use as domain name on AD? contoso.com or contoso.local
b. Is it recommended to have two different servers for AD and Exchange?
c. What should be my connector settings for mail flow?
d. how can I set 2 email servers in company for load balancing?

Hi,
a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
b, Recommended that installing AD
and Exchange Server on two separate
Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
c, Found some articles for your reference:
Configure Mail Flow and Client Access
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
Configuring Outbound Mail Flow in Exchange Server 2013
http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
d, Load Balancing
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

How to create portal user and integrate with external appl login

How to create portal user and integrate the user with external application for single sign-on ?
I want to access my external application thru portal user ..?
Shyam

Hi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag

DNS records to be created for Lync deployment (Internal and External)

Hi There,
If I want the Lync server environment to work Internal as well from External in all the aspects. (auto-discover, meetings, AV conferencing,web conferencing, voice integration, mobility etc), please answer to the below questions and also their purpose please.
I'm not sure whether the answer varies for 2010 and 2013 version.
1. What are the Internal and External(public) DNS records to be created for the reverse proxy(assume i'm using TMG servers), and their purpose?
2. What are the Internal and External(public) DNS records to be created for Lync Edge server, and their purpose?

I'll try to answer as well.
1) For the reverse proxy, you'll need to publish the following:
External:
lyncdiscover.sipdomain.com (You'll need this record for every sip domain you have). This is for client autodiscover.
external web services FQDN (You'll need one of these per pool, you get to choose the name). This is for address book downloads, web conferencing, etc.
Meet.sipdomain.com (You can choose the name here, and have one per sip domain or one for the whole org). This is for web conferencing.
Dialin.sipdomain.com (You'll just need one here, it doesn't have to be dialin). This is for changing your conferencing/phone pin, resetting conference info, and general conferencing info.
For Lync 2013 only, you may want the Office Web Application server pool name as well for PowerPoint sharing. Lync 2010 doesn't use this.
Internal:
The external web services FQDN. You'll need this available internally through the reverse proxy so you can redirect requests on port 443 to port 4443. This will be used for mobile devices on WiFi.
2) For the Edge server:
Externally:
sip.sipdomain.com (you'll need one per sip domain) this is an autodiscover/multi use FQDN and should point to your access edge IP.
webedge.sipdomain.com (edge web conferencing, you can pick any name you like).
avedge.sipdomain.com (av edge, you can pick any name you like).
accessedge.sipdomain.com (you'll need a name for the access edge role, however you can just use sip.sipdomain.com and save a name in your certificate request).
Internally:
edgepool.sipdomain.com (you can pick any name you want, it's just the name assigned to the internal edge interface.
If you choose to have a single ip for the external edge, you can get away with just an access edge name and/or sip.sipdomain.com
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to Setup RDS custom property when internal and external domain name space is different

Hi All
I am setting up RDS for customer
My internal domain name is domain.local and my external domain is domain.com
I came across below PowerShell cmdlets on some blogs because my internal and external name space are different
Set-RDSessionCollectionConfiguration –CollectionName QuickSessionCollection -CustomRdpProperty “use redirection server name:i:1 `n alternate full address:s:remote.domain.com”
In above command, remote.domain.com points to which host?
Is it pointing to RD Session Broker
OR
Pointing to RD Session Host servers
I am not sure what above command will do exactly ?
Any help will be highly appreciated
Thanks Best Regards Mahesh

Hi,
It all depends who is accessing the RDS Solution.
If you have a large BYOD or large number of external users, it would be better to use a public certificate.
Have a look at the following script which will simplyfy the configuration of the RDSH hosts with certificates.
http://ryanmangansitblog.com/2014/05/20/rds-2012-rdsh-certificate-deployment-script/
You can use a custom RDP property to hide the Session host names.
Have a look at the following article on configuring certificates:
http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
Ryan Mangan | Ryanmangansitblog.wordpress.com | Help keep the forums tidy, if this has helped please mark it as an answer

Setup internal and external DNS namespaces best practice

Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local) able to run on the same DNS server (using Microsoft Windows DNS servers)?
MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com if the external namespace is companydomain.com. How shall this be setup? Shall I create my ADDS domain as corp.companydomain.com directly
or companydomain.com then create a subdomain corp?
Thanks in advanced.
William Lee
Honf Kong

Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local)
able to run on the same DNS server (using Microsoft Windows DNS servers)?
Yes, it is technically feasible. You can have both of them running on the same DNS server(s). Just only your public DNS zone can be published for external resolution.
MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com
if the external namespace is companydomain.com. How shall this be setup? Shall I create my ADDS domain as corp.companydomain.com directly or companydomain.com then create a subdomain corp?
What is recommended is to avoid having a split-DNS setup (You internal and external DNS names are the same). This is because it introduces extra complexity and confusion when managing it.
My own recommendation is to use .local for internal zone and .com for external one.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Specification documents o internal and external programs documentation

I have to make some changes in the specification documents o internal and external programs documentation. I want to know i there are defined some standard conventions about the technica objects name and the requirements documentation.
We have made some formats, but we have seen change resistance=2 The problem is the amount of information required in these ne formats that we think is important and will help to reduc ambiguity and to avoid backworks but it's going to ad activities to the developers.

. Ours is bit different to what she sampled but the standardization differ from the team implementing it. You must also come out with the pattern for program "pre" and "post" documentation.
1. Before the actual coding of the program, you have to specify the estimated number of mandays needed for the analysis, coding and documentation. Don't forget to add n% for the buffer. (In our case, we use 30% buffer). Then update the form by putting on the other column the actual mandays consumed. There should not be cases that estimated < actual mandays. If problem is encountered that may cause delay, inform team lead to adjust the estimated mandays.
2. Create a form that will specifically states the unit testing made (eg. Test case, test data, how the test is perform, outcome of testing, rating: pass or fail, etc.)
3. After coding, specific program specification (eg. logic of the program, tables created, function module used, authorization checking, etc). Please be reminded to put result of "program extended syntax check" (tcode: slin) and "run time analysis" (tcode: se30) if applicable.
4. And initial code review must made also. If proper ABAP coding is incorporated and obliged by the program. If the proper naming convention that you implemented is followed by the program...so on and so forth.
hope you'll get some ideas out of it.
cheers,

Internal and External application tier File move

Hi all,
I am new oracle apps R12 with 3 tier instance.
We are created the oracle apps R12 instance with 3 tier. Two tier is Application tier and one tier is Database tier.
The data base tier is common for both application tier. The issue is, we are moved the all customized Development works into only one application tier (i.e. Internal tier). So we are not moved the all customized Development work into second application tier (i.e. External tier).
My question is, we are not moving all customized work into both application tier means , is there any issue will occur ?
How can we handle my customized works both application tiers( i.e. Internal and external tiers) ?
Please help,
Thanks,
Prab.

Hi;
They are questioning me why we have to do that.Answer is easy, You can mention for ebs stability all nodes should be on same level :) If they push you more please show metalink notes which is already sharing by Hussein Sawwan. If they still persist say them you will go wiht SR and confirm wiht support ;)
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Backup internal and external hard drives-TC and offsite

I now have Mavericks 10.9.3 on my iMac with a 2TB (1.25 TB used) internal hard drive.
I also have some external drives attached to my iMac with older iPhoto libraries and other files (total file sizes 940 GB and 505 GB). I primarily use Aperture now on my internal hard drive, but still access those iPhoto libraries on my external drives on occasion. I have Time Machine backup my iMac internal hard drive on my 2TB Time Capsule regularly.
My primary question is in regards to getting another copy onto a larger external drive that covers my internal and external drives so I can have a backup off-site. Online backup services seem to always exclude external drives. So a physical drive I can have offsite seems to be the best option.
A year ago I changed the destination of my Time Machine backup to be on a 3TB external drive (backed up iMac internal hard drive and the two externals). However, when I changed the destination of the backup back to the Time Capsule, the TM initiated a brand new backup (it did not recall that I had backed up prior to that on my Time Capsule).
I want to backup monthly, if not quarterly for my off-site storage. But, if every time I change the destination drive for TM, a new backup profile is created, it will overwork my drives unnecessarily.
Is there a backup program or a process on "disk utility" I could run parallel to TM that I just use quarterly capturing only the changes/additions in those few months for both the internal and external hard drives? Also, is there a way to add an external drive to my Time Capsule that is solely used to wirelessly backup the two externals on a regular basis (i.e. keep the internal 2TB drive backing up to the Time Capsule; and the external hard drive attached to Time Capsule via USB used as the backup drive for the external hard drives)?
Summary: I need to backup regularly to the local Time Capsule/additional external hard drive. The data will come from my internal hard drive and my two external hard drives. I also want to do quarterly backups of the additions/changes to all three drives to have on an offsite external drive that I manually backup to quarterly. Any help is greatly appreciated.

Carbon Copy Cloner is not on the App store.
Correct.. it is not approved because Apple do not like the fact that CCC (and most likely superduper) which are the most popular backup software for Mac because it makes a bootable clone. Apple will never approve of that. But let me assure you that is the genius of it. If the internal disk fails, you simply boot from the external. It is $40 but you can use on all the computers in your home.
CCC is a clone.. ie when it does the backup, any changes on the drive are changed on the clone. It does not work like Time Machine which simply piles up incrementals until the drive fills up. The idea of CCC is a backup of the drive as it exists at any point in time. TM btw is also not a reliable archive, ie it thins backups constantly.. so you should never rely on it to archive old versions.. but in the middle of a project it does a good job to keep various versions of your files. That is why I specifically said in my last post do not stop using it.
and you can keep using the TC just for the internal drive.
Keep TM running to the TC.. that will then keep a current hourly incremental of your drive. You can set CCC in a way which is a lot more flexible. ie backup just at the end of the day. There is no need for constant hourly backups. So to answer the second question.. you are still using your TC and TM.. but I suggest you only backup the internal drive.
Please read a bit from forum expert Pondini on the value of clones and TM.
http://pondini.org/TM/Clones.html
That's why many folks use both Time Machine and a bootable clone, to have two separate, independent backups, with the advantages of both. If one fails, the other remains.
Now the ports issue.
You can of course continue to use USB2. Just that moving large volumes around will be slow.. as doubtless you already know.
On your particular Mac since you missed out on USB3 which is a pain.. you can buy a Thunderbolt to USB3 adapter like the belkin.
http://www.belkin.com/au/p/P-F4U055/
I suggested the Thunderbolt to Esata (it is an older interface and the adapter is rather cheaper but I hear more reliable.. check reviews for both).
http://store.apple.com/au/product/H8875ZM/A/lacie-esata-hub-thunderbolt-series
Sata is the interface of the hard disk.. Esata just means external sata.. so it is native and without conversion.
I was merely suggesting ways to speed things up. But as long as you don't run CCC on more than daily basis then I think you will be fine just with USB 2. It will take a while on the day you do the swap over for the archive volume, but if you turn off the power saving in the Mac and leave it run overnight it should be able to do most of it.. you need to realise it will have to deep scan both the disks.. to compare files.. but CCC is based on Rsync and it is extremely fast and efficient. I am just not sure I know how long it will take to do. Anyway.. there is a plan.. tweak and adapt as you see fits your needs.

PP Internal and External Operation

Hi,
I am marked one of my operation( say 40 th operation) in routing as 'Internal and External operation'. This operation is done both internally as well as externally.How I instruct system 60 Pc is processed externally and 40 Pc is processed internally incase of 100 PC of order qty.? More over how to confirm both of them???
Edited by: Velmurugan S on Apr 29, 2008 7:44 AM

Hi,
I am not sure but it seems both the types are possible in this case. If you apply a control key with this setting, you may be able to either process it internally or create a PR against it.
Note that its OR and not AND. So you may be able to process in one of the way and not both.
For better understanding please check it in testing and tell us the results.
Sumeet

Internal and external ranges...?

Hi All,
I have one question about internal and external ranges. When im sending some products data from source (200) Client to Target (202) Client. I have to find out its using internal or external updates.
Pls give me sample code how to check that.
Akshitha.

Hi,
I dont think a sample code can solve your problem. You can take help of your functional consultant while working with Number Ranges.
Internal Number Ranges and External Number Ranges are used to generate sequetial numbers, which we can create in the SNRO transaction.
Internal Number Ranges are Auto matically generates the numbers in the given ranges for the Object where as we can give certain number with the ranges given is the External Number Ranges. So External number Ranges are Obiviously useful for Data Transfer between two systems or Clients.
Because the Masterdata should reflect same in both the system, with that only integrity stands there .,
We can find this with debugging the corresponding program.
Thanks,
Naveen.I

Calling Party translation internal and external

Hello all!
I have a problem regarding the external phone number mask and some special requests.
Basically is the feature "external phone number mask" enabled and in use.
Now we have the following request:
Several phones are member of a hunt list, with the extension 555. They want now two groups, one should show internal and external the 555. And the other one should show internal the 555 and external the "normal" extension of the user.
Overview, showing the numbers:
Phone group 1:
external: 555
internal: 555
Phone group 2:
external: line extension
internal: 555
Used is CUCM 8.6 and MGCP-Gateways to the PSTN.
Has anyone an idea to configure that?
Thanks a lot!
Kind regards,
DrMxxxxx

Ah, got it. Well here's how you do it then:
Create a Partition for e.g. PT-CallingParty and put it in CSS-CallingParty.
Create a Calling Party Transformation Mask as following:
4912345XXX with PT-CallingParty
Check Mark "Use Calling Party's External Phone Number Mask"
Under Calling Party Transformation Mask put "4912345555"
Now, for phones:
Go under each phone and under Number Presentation Transformation Uncheck "Use Device pool Calling Party Transformation CSS" and from dropdown just above it Select " CSS-CallingParty" (Apply config, I will suggest BAT for this if you have multiple phones)
Once done that, For User A put External Mask as 4912345555
Whereas for User B put 4912345456
Let me know how that works out for you.
Regards,
Vishal

Transaction to rate an internal and external instructor

How to set rating for internal and external instructor and also write comments about the training

in the business event appriasal
You can create a criteria grp Faculty
and you can add Criterias like
-Ability to draw Participation
-Communication Skills
-Faculty's Knowledge

DNS Forwarding Same Internal and External Zone

Hi,<o:p></o:p>
So we have decided that we want our internal domain to be the same as our external domain e.g. domain.uk. I understand that split DNS can be used
to fulfil this requirement but is it possible to set up a forward so if the DNS entry is not available in the internal zone it will forward onto one of our external name servers where it can resolve?<o:p></o:p>
We are basically trying to avoid having to add the entry on both external and internal DNS servers for it to resolve. So far I have added the external name servers to
the forwarders and disabled root hints which didn’t work. I’ve tried to add a conditional forwarder but it says the zone already exists. It seems the only to achieve the internal resolution is by creating the DNS entry both internally and externally.<o:p></o:p>
Does anyone know if this is the case? It seems strange that you couldn’t point the DNS to another external name server for resolution? <o:p></o:p>
Any help would be appreciated.<o:p></o:p>

You must ask in networking forum
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverNIS&filter=alltypes&sort=lastpostdesc

How tro create a Internal and External repository?

Similar Messages

Maybe you are looking for