How update HANA Studio

On page 22 in this document 'adt_740_installation_guide_2.28' is states:
"ABAP development on SAP HANA: For this use case, you already have SAP HANA Studio 1.00 (revision 80 or higher) installed on your local drive."
I have installed:
SAP HANA Studio
Version: 1.0.48
Build id: 201301130825 (372847)
I am using this document: 'SAP_HANA_Studio_Installation_Update_Guide_en' according to which on page 26 I can do a manual update:
"2. To update the SAP HANA studio manually, proceed as follows:
a) From the main menu, choose Help Check for Updates. The SAP HANA studio checks the specified software site for an update.
b) If an update is available, follow the on-screen instructions to install the update."
I get the message "No updates found"
So how am I supposed to be able to update from 48 to 80 if it cannot find any updates?

>The SAP HANA studio checks the specified software site for an update.
Do you have software update site configured? One doesn't come pre-configured for you. Generally inside a corporation, your system admins will setup a central site and we at SAP can't know what that is. if you are using a public version of HANA (Trial or HCP) then I would recommend using this public update site: https://tools.hana.ondemand.com/. However Rev48 is pretty old. I'd probably recommend unistall and reinstall to be safe. If you don't access to the service marketplace for the installer you can get it from a public site as well: SAP | HANA Developer Edition

Similar Messages

Change user session language in HANA Studio

Hi All,
I have created a calculation view and used text join with a text table. The text table contains description in 2 language (say English and German).
When I check of the output of the calculation view via SQL query (or data preview), only the english description is coming; which is perfect.
My question is, how does HANA studio knows that my user session language is English? Can I change it to a different language?
Say I want to see the German description. How can I get that?
Regards,
Raja

Hi Raja
You can change the language settings in the properties dialog for the logon data.
As the logon language is set at logon time, you need to re-connect after changing the settings to see the effect.
BTW: this question had been answered already several times - using the search bar is not a crime...
- Lars

How to Transport Hana Studio developments Calculation, Atribute and Analytc View ?

Hi Gurus,
How toTransport developments DEV -> QAS -> PRD in Hana Studio for Analytc, Atribute and Calculation View ?
thaks !

HI Rogerio vaz de souza
delivery units are the method of transport which authenticate the import/export process. Example: You should assign packages to delivery units and then all package content is exported and imported into the target system .
More information follow below link
SAP HANA Transport Best Practices

How to add system to login using sid adm user in HANA Studio

Hi,
I have added SYSTEM user for my TEST system in HANA Studio. Now, I would like to add TEST system but using <sid>adm user.
It shows "The system cannot be reached. The logon data could not be used. Do you want to add the system anyway?".
May I know how to add TEST system using <sid>adm user?
Thank you.
regards,
zl

You need Database user, not operating system user <sid>adm user.

How to periodic backup job for Hana Studio

Dear Hana Gurus,
I want to make periodic backup job in Hana Studio, how can i do that ? I can backup in Hana studio easly, but i couldnt find job backup
Best Regards

And clearly you couldn't find the search functionality here in SCN.
This question had been asked, discussed and answered often enough.
It's even documented.
Please: do your homework - due diligence.
Thanks for following The SCN Rules of Engagement.

How to update zend studio plugin?

hi
zend studio has been recently updated getting some serious bug corrected.
how to update zend studio inside flash builder for php?
cheers
holo

Hi Holo,
FBPHP 4.5.0 includes all updates presented in Zend Studio 8.0.1.
Do you see any issue that was not integrated please post it here.
Thanks!
Roy

How do I enable the Memory Overview in HANA Studio?

I read John's blog about the SPS7 features:
http://scn.sap.com/docs/DOC-49991#comment-467746
Now I wanted to see the Memory Overview myself. I granted the role sap.hana.admin.roles::Monitoring to user SYSTEM and opened the Memory Overview. This is what I get:
I cannot see the Memory Overview with HANA revision 70, 71 or 72.
I cannot see the Memory Overview with HANA Studio running on Linux or Windows.
I cannot see any entries in the tracefiles of the HANA database.
The same problem with Resource Utilization, I get a blank window.
The HANA database is up and running. Database, Client and Studio are revision 72.
What do I do wrong? It seems that I am not the only one affected.
Regards,
Mark

Hi Mark,
Have a look at the loaded Delivery Units (DU) in your SAP HANA system. Is the HANA_ADMIN DU available?
Check if all the Delivery Units have been loaded
In SAP HANA Studio open the Modeler perspective and check the Delivery Unit.
In the menu Window => Open Perspective => Other select the SAP HANA Modeler perspective.
In the Quick Launch view navigate to Delivery Units. The following Delivery Units should be loaded by default.
HANA_ADMIN
HANA_IDE_CORE
HANA_TA_CONFIG
HANA_UI_INTEGRATION_CONTENT
HANA_UI_INTEGRATION_SVC
HANA_XS_BASE
HANA_XS_EDITOR
HANA_XS_FORMLOGIN
HANA_XS_IDE
HANA_XS_LM
HANA_XS_SQLCC
SAPUI5_1
If there are Delivery Units missing please load all Delivery Units using the Import option in the Quick Launch view. Click Import => SAP HANA Content => Delivery Unit
Select the files from the Server option.
Open the File drop-down menu and select the missing Delivery Units one by one.
To load the Delivery Unit press Finish and repeat this for all missing Delivery Units.
Hay

Can not creat ui5 project in hana studio

hello everyone:
i installed UI5 toolkit in hana studio, but when i creat UI5 project, the error like picture shows below come out, is there anyone who knows how to fix this problem? thanks a lot.
here is my hana studio installation details

Hi yang,
have you update with this link?
SAP Development Tools for Eclipse - Kepler Software Repository

HANA Studio: Installation and usage

Hi,
I am currently retaking the the introduction course in the HANA development and wonder about the HANA studio GUI presented there.
Installation:
I see on the HANA Dev site that there is the Studio and the Client. Do I need both for installation? Or is in the studio already the client provided? If not, why are they separated? (instead of combined?)
Short: What is finally required for installation?
Plus in the intro on the second unit it is mentioned that I have to install as well some regi (???) client to access the HANA repositories. Is this still true? Also reg. config I see in the 1.0.80 version not the config-items as mentioned in the video. So, do I need them? resp. where to configure them?
Usage:
And last but not least I wonder about the statement that the System View is not much used. Better use the Project Explorer (or so). According to the video you could create your own files with the extensions you like and they will automatically associate with the proper editor. Is it really that in daily business the System View is hardly used? One creates his/her own files with appending the appropriate file ending?
roland

>Since everything is done in the System View (e.g. create an Analytic View) where is it stored?
It doesn't matter if you use the Systems View or the Project Explorer; the content is stored the same place/way on the server. When you save/commit in either tool the content is always stored in the HANA Repository. The HANA Repository is just a set of database tables (_SYS_REPO schema).
>Before activation and after?
You shouldn't really go picking around in the Repository database tables, but if you are curious before activation the content is stored in _SYS_REPO.INACTIVE_OBJECT and after activation in _SYS_REPO.ACTIVE_OBJECT.
>Therefore that I cannot switch forth and back with versions of a View, correct?
If you use the project explorer you can just access the version management from the History tab and restore or compare from any previous versions:
>When I follow your video, than I create first a package in the System, which will be updated in my repository view. Checkout, checkin, compare old vs. older version, etc. can only be done in the Repository View, correct?
You have to keep in mind that the Systems view was created before we really had a developer perspective in HANA Studio. It was design with Information Modeling (view creation) only in mind. Therefore in SPS05 when we added the developer perspective and many of the new development artifacts we introduced the repository and project explorer view. When you create a package via either tool - they are the same thing. However if you want to then work with a project or any of the newer development artifacts you must check out the project from the repository view and edit the objects via the project explorer.
>Is it also possible to check (resp. compare) if something in a folder structure was changed?
Changed by someone else after you checked it out? If so, you usually would just do another check out from the project. Otherwise you will find any conflicts when you activate.
>In SPS08 the project is automatically connected with the Team and I don't have to do anything further, like Share. Correct?
Correct. We continue to make usability enhancements and the automatic sharing of a project during the project creation wizard is one of those. We will continue with such enhancements in SPS09 - allowing the project creation wizard to also general some of the basic development artifacts (like xsapp and xsaccess) for you. You might be interested to know that we have a new openSAP course for HANA development starting at the beginning of October and it is based upon SPS08 and will showcase these improved workflows.
>For SPS08 is there an easier way to create the .xsaccess-file?
There is a new wizard that inserts a template content. It certainly shouldn't lock up your system to choose the wizard. Not sure why that would happen. You can also use the HANA Application Lifecycle Management tools and its Application Creation Wizard to generate the initial development objects with template content. For the complete list of all available options, please refer to the developers' guide on help.sap.com.
>Editor = at least two tabs, one with drop-down lists and one with text-files
Not within the Studio. After you have created the XSACCESS File it can be 'configured' via the XS Admin web interface. Not all options of the xsaccess file can be set from the XS Admin tool yet, however. Today you can mainly configure the authentication options.
In SPS09 we will extend these options to also include the CORS and Headers configuration:
>Does this mean, the files are automatically synced?
They are automatically committed upon any create or save operation. Originally in SPS05 you had to always choose to commit via a context menu. To improve the user experience we changed this to automatic. The manual commit menu option is still there (team->commit from the right mouse context menu). However it is really only needed if something goes wrong with the communication to the server or if you were developing offline and then want to force sync with the server at a later time.
>Since in the connection no specifics reg. server, port is provided I wonder how the magic is done
No magic. The XSJS code executes within the database. There is nothing for it to connect to since by its very definition it is always running within the database. The XS server isn't a separate application server connecting via JDBC or ODBC. The main point of XS is that it is a light weight application server fully embedded within the database.

Unable to connect to HANA One instance from HANA Studio

I am trying to add my HANA One instance to my HANA Studio and keep getting an error "The system is not reachable, the login data could not be considered". Any pointers on how to troubleshoot this would be much appreciated.

Hello G,
We understand you situation very well. We are expecting a follow-up on the status based on our suggestion made within less than 1 hour after posting the issue even during weekend.
As far as your SAP HANA One Developer Edition, the suggestions made here for productive uses may not be relevant. Please follow-up appropriately posting and following SCN from where you initiated HANA One Dev Edition as SCN is heavily used for Dev Edition..
In either case, you should not keep any instance running till you can use it. We strongly recommend to stop the instance while you are not using it or between troubleshooting.
@Gaurav,
We will appreciate an update here. We like to see you are start using SAP HANA One for productive uses immediately.
Thanks and regards,
Swapan

While installing HANA studio , i am getting Error

Hi Experts,
While installing HANA studio, i am getting Error " Java installation not found" . I have already installed latest JDK, JRE from www.java.com and also set path PATH.
I am on Windows 7 , 64 bit.
Any one have idea how to over come this Error?
Thanks.

Hi Tomas,
I am on windows 7 64 bit. How should i verify if jdk has been installed correctly? how to verify if correct path has been set.
I am using hdbinst.exe file.
Here is log entries
19:02:46.064 - INFO: SAP HANA Studio kit detected.
19:02:46.064 - INFO: Looking for java installations
19:02:54.685 - INFO:   Found 1.7.0 64bit in C:\Windows\system32\javaw.exe ($PATH)
19:03:01.635 - ERR: No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO: -
19:03:05.137 - INFO: Checking configuration of installation (dialog Define Studio Properties)
19:03:05.137 - INFO: -
19:03:05.137 - INFO:   Looking for java installations
19:03:05.137 - ERR:   No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO:   Parameter "TargetRepositoryPath" is not set
thanks

Connect SAP HANA Studio to database on local server

I've installed SAP HANA Studio, and my application is running on a local server. How could I connect to my local database from Studio?
What are the values for Host Name, Instance Number and options for JDBC Connection, where can I find these data?

Not related to UI Development Toolkit for HTML Developer Center. Moved to SAP HANA Developer Center community.
Regards, Mike (Moderator)

Not able to start HLM from HANA studio

Hi Experts
I have installed SAP HANA SP07 version with patch level 4 on one of the node of a 4 node server.
4 nodes   A B C D
on node A i have installed AP HANA SP07 version with patch level 4    and everyting is working fine form HANA Studio 8.2
on node B i have installed AP HANA SP07 version with patch level 4    HLM is not working with HANA Studio 8.2 and at oslevel to.
i did update to latest HLM version ie., sp7 patch12.
but still the same error.
welcome any suggestions.
Thanks
Kishore

Hi Sadanand
Thanks for your update.
I did start the HLM as following
#cd /hana/shared/<SID>/HLM
# ./bootstrap-hlm.sh
i got the following prompt
<hostname>:/hana/shared/<SID>/HLM> ./bootstrap-hlm.sh
There is bootstrapped HLM
Checking for running HLM...
There is no running HLM.
Configure /usr/sap/hlm_bootstraps/<SID>/HLM/hlm.sh
osgi>
and now i can seel HLM process running at os level.
but still not able to launch HLM from HANA studio and the following URL is not working
1) via browser: http://<host>:1129/lmsl/HLM/<SID>/ui/?sid=<SID>
This webpage is not available
Thanks
Kishore

Problem updating Logic Studio

Hey there all,
I have been having a problem updating Logic Studio 9. My purchased version is 9.0 (full, not upgrade) and I tried to update to 9.1 a while ago. When I did it, I got this very strange error message that said there was a system error of some sort. This of course sent me in to a panic, however my system itself seems to be stable, so I can only assume this is a problem with the updated software.
Eventually, I deleted the updated software (which left 9.0 on my system), and since then (this was a WHILE ago), I've spent a lot of time trying to figure out what to do to be able to update the software. I can't tell you how many times I have uninstalled, reinstalled, and re-uninstalled the original disks. I just can't get the software updater to recognize that I uninstalled 9.1 so that I can re-download the software update. And for god know what reason, I am not able to connect to the downloads server to get the upgrade.
Can anyone tell me where/how/if I can fix this?? Logic 9.0 keeps crapping out on me. I'd like to have access to my songs, etc.

hi, Colpanique.
A couple of ideas. Is your OS up to date? Are you running SL? It's better for LP9 than Leopard. Is LP9 registered?
Software updates sometimes have a proapp u/date. This is for Logic/final cut etc. If they aren't on your system, the later LP u/date might not install.
Another reason why LP 9 caps out is ram. I have LP8, and I know 9 requires more ram. 1G is at the low end, and might be insufficient for the OS and LP9. Run out of ram and the app will crash. This true if you load samples or drums etc,
If LP 9 isn't registered, the apple server won't let you get 9.1. I tried, as I wanted to go from 8 to 9 and bypass the bugs in LP 9.0. 9.1 is more stable.
Anyway, hope thsi is of some help. Good Luck. Scorpii Pirates.

Message "Failed to create Java Virtual Machine" while installing HANA Studio with SP08

Installing HANA Studio with SP08 but getting error as follows:
HANA Version
Errors:
System Info : Win7(32 bit ), 2GB RAM, 500GB HDD

Not same case but related with Java: 32Bit VI Java Virtual Machine error
In this discussion Hanry Banks answers as follows:
1. Did you install using "Run As Administrator"?
2. In your Advanced System Properties, Go to Environment Variables > System Variables
Look for the 'Path' variable. It should include the following values: C:\Program Files\Java\jre6\bin
In the same area, look for the 'JAVA_HOME' variable. It should point to C:\Program Files\Java\jre6
- Can you confirm?
3. Also go Control Panel > Java > Java Control Panel > Java tab > View > User > Path. It should point to C:\Program Files\Java\jre6\bin\javaw.exe .
- How does it look for you?
How much memory is available on your machine as you launch? Go to: Task manager > Performance > Physical Memory > Available (MB)

How update HANA Studio

Similar Messages

Maybe you are looking for