How use different languages in the edition and have the grammatical corrector?

Hello,
I am using the "ibook author" to create a magazine with different languages as text, and I would like to know if the program can reconogize the different languages, because it is cutting very bad all the words when it arrives to the end of the parraf.
Please let me know what solution could work for this case.
Thank you very much in advance
best regards
jc9revolution

Works everytime i try
screen shots
new book with basic template.
First add second chapter
then
1) click TOC page tab/button
2) select image drag new image and replace image
3) click second dot to go to next chapter (2)
4) drag in new photo (farmer guy is new photo, replaced b&w flow photo)
now click on frist dot to go back to chapter 1 TOC will be first photo draged in (nycity)

Similar Messages

HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
If I needed the lobotomized version I'd be using my iPad!
Any way (official or hack) to change this button back to its proper funcionality?
Thanks!

cterra wrote:
How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix? iMac and Mac Pro Thanks

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
iMac and Mac Pro
Thanks

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

Ok, so I want to buy the new iPod touch 5g this week and I have an iPhone 4. I want to transfer all the data from the phone to the iPod and have the files the exact same. I don't want to redo data, say erase game data (campaigns, achievements)...

Ok, so I want to buy the new iPod touch 5g this week and I have an iPhone 4. I want to transfer all the data from the iPhone to the iPod and have the files the exact same. I don't want to redo data, say erase game data (campaigns, achievements)... I have apps that have very important data on them and if I sync it to iTunes and then transfer all that data to the iPod Touch 5g, will that erase app data?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Version 10 doesn't work with a web site I use constantly. How can I download a lower version and have the app appear on my phone?

Have been using a lower version of firefox on my samsung galaxy phone to access [email protected] for quite some time. Since the upgrade to 10.0, I receive a server error everytime I try to access. Want to download a lower version, but app doesn't appear on my phone. How can I download a lower version and get the app to show up on my phone?

Mandel is referring to what is called a "User Agent Faker' which tricks the website into thinking it is a different browser or version than it actually is. I sometimes would use this on my iPhone when I wanted to visit the full website of a site I was attempting to go to & it would only take me to the mobile version or state it was only compatible with say Internet Explorer, simply turn it on & select the browser and details you want it to report and it will spoof that browser & you'll be on your way.

I cleaned up several albums in iTunes only to have Match wipe all of my changes out. How can I alter things in iTunes and have the changes stay?

I signed up for Match but when I added new albums, they failed to appear. Ultimately I got a message to Sign Out and then Sign In to the Apple Store tab under iTunes. I then added the computer back to Match. It went through the process and uploaded the new albums (or matched them) but it also reversed hours of work I had done it editing my library and cleaning up track lists and song titles.
HOW CAN I edit/maintain my library without Match wiping every change out?????
And when will the Cover Art issue be solved???

Match was off. I made all of the changes and then went through the "Turn on iTunes Match" option. I now have deleted some tracks, edited the Metadata in CDDA, and then added it back. This worked fine, but it is not a good solution.
I just tried making some edits and use the "Update iTunes Match" and that seemed to work. It looks like the real answer is that Match must be up and operational, then you can make changes and run the Update to incorporate the changes. However, if Match has a problem then Signing Out and back in to your store account and going through the process of Turning On Match (were you get the questions, "Add this Computer to Match" will overwrite any changes.
Since this relies on the stability of iTunes, I won't be making a lot of changes between updates.

How do I call a sub vi and have the window appear in a certain location that I specify?

I have a vi that will be used to control a robot. I am using a sub vi that is a sort of joystick-drag the mouse to move the robot. This pops up as a dialog when the user moves the mouse over a graph, but it appears in the middle of the screen. I want it to appear right over the graph in the main vi so that, effectively, the user only sees the one graph (it is next covered with the sub-vi which has exactly the same appearance). I need a way to force the sub-vi's window to appear in an exact spot in relation to the main vi. Is this possible? How is it done?
I saw something on this site already, but was unable to find it a second time...something involving queues?
Thanks,
Sean

If you're on LabView 7.0, look at the new sub-panels. If not, look at the Ghost in the Machine.vi VI Server example program that shipped with LabView 6. To find the example in LabView 6, from any VI window goto Help >> Find Examples >> Search and enter VI Server in the box labeled Type a keyword to find. The example uses property nodes on the front panel with properties like FP.Bounds and Disp.WkSpace. There's also FP.Origin.

"Itunes can not connect to this Ipod. An unknown error occurred." I get this message when I plug my Ipod touch into my Imac. I have restored the Ipod and have the latest Itunes. I have tried different cables and a macbook.

I have an Ipod touch 8GB, an Imac and an apple laptop. I have had this Ipod for years and it has been synced at different times to my Imac and laptop. Recently the battery ran way down on my Ipod. I plugged it into my Imac. After it charge I had to restore it. After I restored it Itunes couldn't connect to it because, "An unknown error occurred". I tried to connect it to Itunes on my laptop and got the same error message. I have tried different USB cables. Since Itunes won't connect, I can't do another restore. I don't know what do try from here.
Some additional info that might be related to this. Just before this Ipod problem came up I crashed my hard disk on the Imac. I had to erase it and reload all my stuff (I was able to copy the contents to a hard drive connected to my laptop using the firewire - I couldn't use time machine because of the crashed HD.) My Imac has been restored to the latest Itunes - I am running OSX 10.6.8.

Thanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan

HT1918 I was tryin to use a gift card at the itunes store. My account was charged 19.99. Is there anyway for me to return the ibooks and have the charge put back in my account? This was my 1st purchanse and I did not realize I would not be given a choose

To continue from above. I have changed may payment to none. So in the future I have a choose on how to pay. Can my i book s be returned and I start all over with gift card. I would like all my i books to be turned and the 19.99 put back in my account and the $20 gift to be put back so I can start all over. Last night was my first time using itunes and I only wanted to spend the gift card.

You can't choose how items are billed - from http://support.apple.com/kb/HT5582 :
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
So if you have a balance on your account then that should be automatically used up before your credit card is charged for any remainder or additional purchases (unless you are gifting content, that can only be done via a credit card).
All purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you (these are user-to-user forums) : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Is there a way to have the 'new tab' icon on the toolbar AND have the "new tab" button at the right end of my tabs, as before? It seems to be either/or.

Under the previous version of Firefox I had the "new tab" option in both locations. When I upgraded, the one at the end of the tab line had disappeared. I used the suggestion from the forum to reset to default and it did reappear, but the icon in the toolbar had disappeared. Since there is no + in the customization window I cannot place a new one, and if I drag and drop from the tab bar it moves to the toolbar, but will not duplicate itself. I use either of these interchangeably, and having only one or the other is a real annoyance, and does slow me down when doing multiple searches or otherwise utilizing multiple tabs.

Hi, I have a similar problem with 12.0 of Firefox. The 'Add New Tab' tab has moved from the righthand end of open tabs to the left hand end.
If I right click on an empty tab area and select customize the "Add New Tab' tab disappears and an Add New Tab icon appears at the right hand end. I can drag and drop this icon into the Customize Toolbar window.
However if I drag it from the window back to the Tab toolbar area on the right. It initially appears on the right. Then clicking 'Done' on the Customize Toolbar window converts the icon to a tab but places it back at the left hand end of the tabs.
I'm sure this didn't happen before - so it's a possibility I have messed something up but I can't seem to correct it?

I have purchased Creative Suite 6 and it keeps asking to sign in and put in product code. Says "trial period has ended." I purchased the suite and have the disk.

I purchased Adobe Creative Suite 6 (have the disk). But now it keeps asking me to sign in and reenter my product code. Says "Trial Period has ended." There was no trial period. I purchased the suite. Very annoying to have to keep logging in. How do I fix?

Thank you Benjamin.
I may reinstall. It wont let me continue until I have entered the product code. Says "trial period" has expired.
Thanks again,
Jim

HT203167 just downloaded a music album and most of the songs cut off half way through i redownloaded the album and have the same problem

just purchased an album and most of the songs cut off half way through

Try again. Delete the copies of the corrupt tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there. In the downloads window remove the tick (if present) from Allow simultaneous downloads.
If the problem persists contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2

How do I label a photo so that I can export the iPhoto and have the label stay with the picture

How do I label a picture in iPhoto so that the label stays when I export the iPhoto to a dvd?

What do you mean by 'label' exactly? I can think of several possibilities:
Text on the Photo
Coloured Label like a Finder label
Text in the Exif or IPTC metadata
Filename
and we've see all of these used on here as 'label'. So if you can clarify we can help more.

How do I repeat an event monthly and have the event deferred to a Monday if that event falls on a weekend?

For example; a company payed their employees on the 1st of each month. If the 1st falls on a weekend they will be payed on the next following working day. How would I document this event in calendar so that the monthly event recurs without falling on a weekend?

sd,
Choose "repeat" Custom..."Frequency" Monthly "On The" first weekday.

My harddrive crashed. I got a new hard drive, and attempted to port my CS3 design software onto my new hard drive. It says it cannot work and I must uninstall and reload the software. I registered the software and have the serial, but cannot find the o

I bought the design premium in 2007 and can no longer find my original software. I need to uninstall and reinstall but again can't find my software, but all applications are in my backup drive. Any help?

Julia,
Here is a download site which goes back to CS3:
http://technolux.blogspot.co.nz/2011/02/adobe-direct-download-links-less-akamai.html#more
Or you may use this one, (t is crucial to follow all the initial steps precisely):
http://prodesigntools.com/tag/ddl
There are known issues with Yosemite, if that is the OS, but according to this site, someone has made Yosemite work with almost all CS/CC versions.
http://roaringapps.com/apps?index=a
For a specific CS3/Yosemite issue, namely CS3 crashing on opening under Yosemite, this solution,
1) Open System Preferences > Java
2) Wait for the Java Control Panel to load
3) Open Adobe Illustrator (while keeping the Java Control Panel window open)
has been given by Allycs in post #10 in this thread:
https://forums.adobe.com/thread/1610653
1) Open System Preferences > Java
2) Wait for the Java Control Panel to load
3) Open Adobe Illustrator (while keeping the Java Control Panel window open)

How use different languages in the edition and have the grammatical corrector?

Similar Messages

Maybe you are looking for