How use iPhoto 7.1.5 for version of osx

I download OS X AND I CAN'T OPEN MY IPHOTO

Which version of MacOS X do you have? Is your profile signature "Mac OS X (10.6.3)" correct?

Similar Messages

Unable to use iphoto-it keeps searching for mvi. #'s

every time i open iphoto, a box appears-- "mvi.(fill in a #) cannot be found. insert disk..."
then there are 3 options--"cancel", "find movie" or "ok" --all of which do not work.
when i hit "find movie", i must Force Quit iphoto cause the red/blue ball never stops twirling looking for the file. i have my external hard drive attached as well.
when i hit either "cancel" or "ok", a new box with a new movie # appears. a new box with new mvi. # will go thru approximately 25 mvi. numbers and then start over. it's always the same mvi. #s.
i don't know or care about those mvi. files. whatever they are, they are lost & i don't know why iphoto wants to find them so badly.
i would like to use iphoto again.
any suggestions are most welcome.

It keeps asking because they are recorded in the database and it can't find them. So they have been delete from outside iPhoto, and iPhoto doesn't know this.
Simple fix: put the files back where iPhoto expects them to be. Otherwise...
Try these in order - from best option on down...
1Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
2. If this doesn't work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Using iphoto to create portfolios for students

I want to use my Mac to create digital art portfolios for my students. I have 450+ students and have previously used an HP and made all the folders and renamed the photos and manually dragged and dropped the files. Wouldn't it be easier to name the files and drop into folders using the keywords or what would you suggest. I want to organize the folders by grade. Should I make a file for each grade level and then make folders for each student under the grade. Would I need to create a keyword for each student? Wouldn't that make way too many keywords? Any advice? I'm very new to MACs
thanks in advance for any help- not sure I can even make my way back to this discussion!

Jerylh
Welcome to the Apple Discussions.
You can check your OS by going to the apple logo top left and choose 'About This Mac'. Unless you upgraded the system, or bought your Mac since Friday, it's likely to be 10.4.
Do you want to use iPhoto for these portfolios? Then remember you do EVERYTHING in the iPhoto Window.
Then one way to do it is as follows:
File -> New Folder: You can create a folder for each grade.
Finle -> New Album: Make one for each student, drag the album to the grade folder.
You can also keyword the Albums and make SMart Albums.
Regards
TD

Can version 8.20 be used as a direct replacment for version 6.0.2

Hi,
My company manufactures a digital heating block which has in the past used LabView Run-Time version 6.0.2 to track the block temperature readings over time. The digital heating block interfaces with the computer via an RS232 port.
Can the new version 8.20 be used as a direct replacment for the 6.0.2 software? Does the software need to be customized for this application?
Thanks.

The most likely source of trouble would be the serial connection. In the past, LV used serial functions which had a blue wire identifying the port as an input. At some point, it started using VISA functions instead and, while I assume the legacy VIs are still there in 8.2 (they now have VISA code under the hood), they might not be or they might be removed at some future date and they probably don't help the performance. Depending on the way the app is built, it might be complicated to do some proper replacing.
Anyway, if your code used VISA back then, then you shouldn't have a problem.
Try to take over the world!

Using iPhoto to optimize photos for a website.

How do you specify 72 dpi when resizing images for a website? I have iPhoto 09 v.8.1.2 (424)

You don't.
Export using the File -> Export option. In the resulting dialogue the "Size" setting will determine the dimensions of the photo (length by breadth) and the Jpeg Quality will decide the level of compression used. For web use medium is usually just fine.
Regards
TD

How: Using the same control panel for multiple vi and propogating changes to the control panel.

I have created a labview project that contains about 40 vi. Each vi has a control panel in common that is a group of ip address, or port address, and settings that are passed from high level vi to low level vi for the purposes of controlling and accessing our daq cards. As this control panel exist in all vi's and is required to be identical there is a problem when needing make a change or update the controls during development. The problem is how much time it takes to go and change every single vi's control panel. I wish to have a way of propogating a change in the control panel across all vi simultaneously.
All control in the control panel are in a bundle, so all values are passed in 1 wire.
I tried turning the control panel into a sub vi, and this way I can just "create control" and have outputs of the vi maniuplate settings, however if I update the vi, I still have to go back and create a new control for each vi as the control has changed.
I have tried using the subpanel and creating the control panel in a sub vi that is displayed in the subpanel, but this gives the unwanted consequence of not being able to view or change settings on the control panel if the program is not running, as subpanels blank out when the program is not running.
Is there another way to dispaly a subvi's front panel beside using a sub panel? Is there a better way to propogate changes in a bundle throughout a series of vi?
JW
Solved!
Go to Solution.
Attachments:
Labjack Comm Settings.vi ‏15 KB

Yes a type def would help you out and I'd take the next step to make it a strict type def if you want the appearence to be the same across all of its instances. You can also review this Nugget on Type definitions for more idea on this topic.
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

ECATT - How use external file/new variant for input data

Good day,
I want to use an eCATT created by someone else for another request. I want to be able to specify my new input data based on the new request WITHOUT generating a new Transport. Same thing as I'm doing for the CATT ... the CATT is transported but only the input data change depending on the request without generating any transport.
How I build my new input file and how to use it? I tried to download my variant but the only possible format is XML and it's very hard to build a new file based on my request.
Thanks for your help.
Simon

Hi,
Can you tell me how you are generating the xml file. My guess is you are downloading the Test Script/ Test Configuration. In that case it creates an xml file.
As mentioned by Ajay, In Test Configurator / Test Data - you can create the internal variant first, i.e assuming you have already created parameters.. On the top, you have a download button "Download Variant". This creates a .txt file. You can open the file in excell and edit it.
For the next test, you can select external variant and give the modified file path name.
Let me know if this helps.
Regards
Phanidhar

Can I use iPhoto to make videos for Web Page?

Hi,
I really don't know where to ask this question, so I'll give it a whirl here.
I now have Tiger and am thinking about getting Leopard. However,
I would like to know what I might have to do, or if it is possible, to
make a video using my iMac to record and then upload to a web page.
I may ask this elsewhere, but I also need some input on creating a
web page with an iMac. I used an old version of FrontPage to create
some websites, but now that I have an iMac not sure which way to
go.
I'll figure out where to ask my other related questions, LOL!
Thanks much,
Lee

A follow up question.
I guess I can record a video using the iSight camera and mic in my iMac?
In other words, I would use iSight with my iMovie application, correct?
So that brings up something else...
If I were to upgrade to Leopard, could I use iSight to record a video and use one of the backgrounds provided in Leopard to block out the normal background that might be seen through iSight? I guess I can do that with iChat in Leopard but I have no idea if that means I can create the video with that background.
And then, of course, I would like to create the video and post it online: that would be the ultimate goal. Or, I guess, even post it on YouTube if needed.
Thoughts or ideas?
Thanks again,
Lee

How use the pager tag library for multi pagin

hi,
in fact i be new in the Jsp World so i want to use the multi pagin in my jsp can you help me.
best regards

So, what do you mean by "multi pagin"? Could you please explain
it a little clearly?
Regards
greenidiot

Since updating to 10.9.3 I have not been able to use my wireless printer. For some reason osx cannot find it or see it. Please Apple make a fix for it ASAP!

Has anyone in the Apple community found a fix for reestablishing a connection to a wifi printer after updating to 10.9.3?

Try resetting your printer and router (power off for 15 secs, then back on).
If that doesn't help, try resetting the Printing System:
http://support.apple.com/kb/PH14141

How can I remove office 2004 for mac after OSX lion upgrade?

Can someone help me, I haven't found a viable solution to remove office 2004 for mac from my system?

Drag the apps to the trash.

Problems using iPhoto on an iBook G3

I have an iBook G3 with OSX 10.4.2. Frequently (two times!) it start erasing all the icons of my library of photographs, then, if I recharge the pictures in the library, I can see the icons again but near of it there is an "empty" icon with the same name. What happens? Maybe the G3 doesn't support the OSX or iPhoto 5? Thank you.

Valerio:
Did you rename or move any files/folder within the iPhoto Library folder from the Finder?
If the library rebuilding by iPhoto doesn't help try rebuilding the library with iPhoto Library Manager. It creates a new library by copying the files and necessary data from the old library. This will create a new database file which may be damaged in you current library and causing the problem. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: It can take some time to create the new library if you have a lot of photos. One user reported that with a library of about 5,000 images it took about 12 hours so plan ahead.
Good luck. Post back if this doesn't help and we can work out a workflow to create a new library from the original files in your current one.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Good evening. When I try to rename a master file or export a master file, it only allows 9 spaces for my new name, even though Aperature 3 allows many more spaces than that for version names. This creates a lot of problems and headaches for me.

Good evening. When I try to rename a master file or export a master file, Aperature 3 only recognizes the first 9 spaces for raw .NEF files, even though it easily uses twice that many spaces for version names. I have a system in place that works really well for me, wherein by changing the file name I can recognize what's important to me just by glancing at the file name, no matter what system it is in, I do not have to open or mouse over anything to know what the file is. My files also arrange themselves in order no matter what file system they are in. Can someone please tell me if there is a setting, or something I am doing wrong, that prevents me from using a longer Master file name. I can't be the only person who would like to have his Master File names correspond to the name that appears in the Aperature library, and would like to use at least 16 spaces (numbers, letters, etc.)
Thanks,
Photo Al

Hi Frank,
As you suggested, I am attaching several screen shots. In the first one you can see how I set up my preset. I used "Custom Name" and "Counter" with a dot between the two drag ins, followed by "D90". I also have a dot to seperate the 8 digits in the Custom Name and make it easier to read.
I then click "OK" which takes us to the second screen shot. Here you can see that in the Example File Name everything looks perfect, and you can see I have clicked on "Apply to Master Files".
In the third screen shot you can see that the version in my library did in fact change correctly. With the "mouse over" pop up screen you can see, however, that the Master File name was changed to "1933.1017.NEF". It failed to carry the "12D90" and if I go to where my masters are stored that is exactly what the name was changed to.
In the fourth screen shot I attempt to export the master. You can see how my "Version Name" is set up.
And finally on the 5th screen shot you see in the File Name Example the name "1933.1017.NEF" once again, which when I export the master is exactly how the name will appear. Since I will export more than one file at a time , a (1) and a (2) etc., will appear at the end of the names because all the files are being given the same "1933.1017.NEF" name.
I hope this reply does a better job of clarifying my problem. I am anxious to see if this is something I simply misunderstood, or if I am simply doing something wrong.
Thanks,
Photo Al

Can't use safari w/this version of OSX?? OSX 10.5.1/Safari 3.04

worked fine on my powerbook g4 before installing Leopard yesterday.
now, with leopard, i get that message..."can't use the application safari w/this version of OSX" what's up??
the same versions (10.5.1/3.04) work fine on my imac g5
software update thinks all's fine and i can't find a downloadable version of Safari on the apple site except for windoze. jeeeze! come on guys, how about a little mac support??

Hi
Welcome to Apple Discussions
Are you certain you are trying to open v 3.0.4? Make sure you don't have multiple Safari versions installed on your machine. Enter Safari.app in your spotlight panel. If multiples show up, move to the trash the 2.0.4 version.
In necessary: Reinstalling Safari 3.0.4 - Insert the Leopard Installer DVD. Double Click on the "Optional Installs". Then double click on the Optional Installs.mpkg file. Once open the Installer will lead you through a few steps. After selecting your HD, the next panel is where you'll find Safari (in the Applications folder). Select it and continue.
Once Safari is installed, "repair permissions" again via Disk Utility in your Utilities folder.

Best practice for version control B2B, ESB and BPEL

Hello,
we are setting up a new system using B2B, ESB and BPEL. The development team is more experienced working with PL/SQL, Oracle Workflow and we are worried that Jdeveloper generates changes to the source files during development and that we might have problems with the version control.
Is there any best practice for setting up version control for these systems? Do we need to take anything in particular into consideration when setting up the projects?
We are using Serena Dimensions 9.1 for version control with the add-on in Jdeveloper.
Thanks in advance!

I believe JDeveloper has a plugin for Dimensions.
I havent used it but to get it, go to tools (It may be help I don't have JDeveloper on this machine to confirm) check for updates.
If you select the thrid party check box - next, you will see an entry for dimentions.
Configure the connection and develop as you would any other project.
cheers
James

How use iPhoto 7.1.5 for version of osx

Similar Messages

Maybe you are looking for