How use the contract reference in iDoc ORDERS

Hello experts,
I would like to use the iDoc ORDERS in order to create a sales order in my system, with reference to a contract.
It's working pretty well when I want to copy all the items of the contract and modify quantities. But I can't find out how to create an oder with only one item from the contract (which got more than one item).
I thought I could use the Action code in segment E1EDP01, but the code seems to have no consequence.
Then, what I want to do is :
1/ Create a contract with 3 items
2/ Create a sales order with reference to this contract but :
- delete two of the items, when they have been normally copied, because of customizing
- keep one item and modify quantity
Do you think this is possible plesae ?
Thank you in advance
Alex

Hello Alex,
Perhaps note 562710 (ORDERS: Creating orders with reference by EDI) could help you here. It explains which segments and qualifiers should be used.
I hope this helps.
Regards,
Ian Kehoe

Similar Messages

Whre to see the contract number in sales order

Hi All,
I created conrtact thruogh T.code:va41,based on this number,i create sales order.But my question is where can i see the contract number in sales order(va01).Pls suggest.
Thanks,
GTNR

Hi GTNR,
This is not possible to see in VA01 while creating the sale order,because the system taking the reference document no form buffer,so it is not possible to see in VA01.While creating the order you select create with reference there it self you will tell the system through which contract you want to create the sale order.
Once you save the order in change mode VA02 you can see that through document flow or form table also you can see
as Mr.Ravi mentioned above.
Regards
Ram

HT1386 I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the s

I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the same computer and iTunes account. The error reads: The iPhone, "Name" is synced with another iTunes library. Do you want to erase this iPhone and a sync with this iTunes library? If I click "Erase and Sync," will it delete my contacts, apps, etc?

The following may help: iOS: Device not recognized in iTunes for Windows

Hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to

hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to click on the fn + function key

Hi,
You can change this in your system bios as described in the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can i use the contract free iphone 5s directly in India?

Can i use the contract free phone bought in US directly in India? Or Do i need to unlock before using it?

Nothing to do with individual bands it is the set of bands
Do you think Apple produce different models for fun ,there is no world Wide chip to cover all 4G bands.
However if you believe you are are right ,why ask and if so do go ahead it is of no consequence to anyone here what you buy
There are tens of posts asking the same question ,go look

Sales Order contract reference for IDOC

Dear Guru's,
Good Day,
We are implementing a Sales order IDOC process for our client with Message type ORDERS (Inbound). Normally in a standard sales order process when u enter a Sold to party, Ship to party and material number system will automatically refere a OPEN CONTRACT available for the sold to party, Ship to party and material.
In my case client has used a customized DATA-T type for Contract to sales order copy control, because of which system is not refering open contract when i run the IDOC.
We can change the COPY CONTROL but client is using this process for more then 2 yrs. we dont know what will be the implecations or effect it will show on my client other SAP process.
Can any one suggest me who i can refere a contract thru IDOC. May by thru BAPI or BADI.
Your suggestions will be more appreciated.
With best regards,
M. Rajendran.

Hi Dude,
I tried checking it with E1EDK41 segment and i gave the open contract number in the field XBELNR. Still Sales order is not refering the contract.
Any other option available.
With Best Regards,
M. Rajendran.

How to use the Cross Reference fields in P4P

I have been receiving questions related to the Cross Reference section from many different customers and partners. This post represents my attempt to describe the Cross Reference Section and the Equivalent Numbers stored within.
Identity
A term that Kelly uses and I will borrow is “identity”. A given specification can have many identities. The basic identity is the specification number generated by GSM. This is useful during early stages of design. Once we get past a draft or development status in the workflow the organization quickly wants to identify the specification in other ways. Examples include:
Execution System Number: Operations and Supply Chain quickly need to formalize an item or material for forecasting, inventory and purchasing…
Custom Numbering Conventions: Sometimes an organization has very specific custom logic for identifying materials. Usually terms like smart numbering are used to describe their methods.
Data Migration Identifier: In some cases customers have extensive data clean up projects. As part of the effort systems and processes are developed and an identity is created. In my experience we loaded a “Base Stock” number to represent Packaging Materials. The label stock that was commonly used was historically not represented so we created a number as part of the migration project.
Identity Functionality:
The Fields: The four major fields that make up the Cross Reference section are as follows:
>>System Name: This field describes the system generating the identifier. Examples I like to use are Oracle EBS or SAP Material Master. Sometimes geography must also be concatenated to the system, i.e. Oracle EBS – NA. This occurs when the customer is a large multinational where multiple ERP implementations exist. Therefore the same material may be known by many different numbers, i.e. Oracle EBS – NA = 77432, Oracle EBS – EU = 88883.
>>System Code: The system code is merely the syntax used during integration. Using CSS or various APIs you may chose to identify the system using an abbreviation, EBSNA or SAPMM.
>>Equivalent: The value representing the identity within a given system.
>>Externally Managed: If you are using CSS or an API to receive Cross Reference data you can define the field as "Externally Manged". When a cross reference is marked in this manner the general user community will not be able to edit the field. Administrators associated with the role [Externally_Managed_Cross_Ref_Admin] can edit the field if needed.
Syndication: While some users enter equivalent numbers manually, others use integration tools to generate and transmit identities. If a given cross reference is marked as “Externally Managed” then users are unable to manually enter data. On initial syndication the specification will not have a given equivalent. The specification is sent to middleware, a number is generated by the appropriate system and the response is sent back to GSM to add the System Code to the specification with the appropriate identity value.
Copy verses Issue:
>>Copy: When a user copies a specification the Cross Reference data is NOT included. Since the identities refer to the originating specification it does not make sense to carry over to the copy. If we did then users would quickly need to delete the data.
>>Issue: When a user issues a specification it maintains the Cross Reference data. This is an important concept because it is expected that a system like GSM will have many issues related to a single ERP #. ERP systems are usually not interested in many of the fields stored in the Product Data Management system.
Reference: As raw materials are consumed as inputs into Formulation or Trade Specifications the organization may come to identify the materials based on equivalent numbers. Therefore GSM allows for an equivalent number to appear next to the GSM number.
Implementation Issue: Ingredients In Packaged Quantities
Some customers run into a situation where the ingredient specification does not represent a packaged quantity. From an R&D perspective the developer does not care if the material comes in a box or a tanker. In this situation the GSM ingredient may be represented in the ERP system by many items and therefore more than one cross reference value. These items represent packaging differences that are important to purchasing, manufacturing, warehousing, and other execution systems.
I hope this helps describe some of the purposes and implementation issues around the Cross Reference field.

You need to get jmf.jar in your CLASSPATH, either on the command line, in an environment variable, by putting a symlink in $JAVA_HOME/lib/ext, whatever works for you. Have you done that? Once it's in the classpath, you can run jmstudio from any directory with the command "java JMStudio".
Items in the bin directory are just shell scripts, run with "sh jmstudio" or whatever suits your shell (on Mac OS X, copy one of these guys and append ".command" to the filename to make him double-clickable in the Finder).
--invalidname

In firefox I cannot use the search engine, like to order a product or search it seems to be in the upper half of screen

in firefox. Icannot use the search engine in the screen and I cannot order anything as well. I get the cursor arrow insted of the I symbole.. I even reloaded firefox too. Can some one help?

'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Plant missing in the inbound processing of IDOC ORDERS?

Hi gurus,
We are using IDOC ORDERS to create sales order in the inbound processing of R3 4.7 system, finally we found the sales order was created succesfully in VA03, but the plant(WERKS) and storage location(LGORT) couldn't be seen even the idoc has relevant value.
Have you met this case? Any help will be appreciated. Thanks.

Hi Himanshu,
Thans for your reply. I gave the field E1EDP01-WERKS the relevant value, but in VA03 we couldn't see the plant value when the idoc status was 53. When we debug it in WE19, we found the plant value probably wasn't assigned.
Any ideas?

LIPS-HANDLE How use is it in Outbound Delivery order?

Hi, everyone.
Could you advise for me.
I want to modify the Item of Outbound delivery order using enhancement spot "ES_SAPFV50D".
If I can separate the item into several parts, I have a trouble how to set the data.
I don't know how to set the data to LIPS-HANDLE.
How is it used in Outbound Delivery Order?
it seems GUID Key..
Soma

steps by step procedure to cancel outbound delivery :
1. reversal of the checkpoint departure
2. reversal of goods issue
3.reversal of load end
4. use /n/scwm/adhu , go to advanced search , upload HU . unload the truck using the warehouse process type 3065 ( check the standard codes )
5. reverse load begin
6. delete the outbound delivery in TU screen
7. cancel picking and packing activity by using /n/scwm/cancpick and release all the HU . this makes the stock free from the outbound delivery
8.in /n/scwm/prdo screen , goto process code -> adjustment tab . and save
9.click on "outbound delivery " tab in item overview section . this updates in ECC
9 . check in the item tab ( in item overview section ) -> form view , whether the stock is zero or not
10. check the queue
11 .check the stock overview in the ecc by clicking vl03n -> goods movement - >... the status will be shown as "completed" and the quantity will be displayed as zero
i hope , i hve made the steps clear but still any issues , plz tell me .

How use the method hasPermission in weblogic server 6.1

Hello everybody !
In my application web ,i restrict access to some ressources (some jsp)
to some specified groups .
So,i create permissions in the file web.xml , as indicated in the doc
6.0 .
For example only the user : system can access to all the jsp , and the
others users no .
Now ,in my code ,I would like to use the method hasPermission in order
to modify my application according to the differents groups of users .
But my problem is that i don't know the parameter aclName !
For the parameter permission I use the syntax "new
weblogic.security.acl.PermissionImpl(".../x.jsp") .
For the parameter sep (char),i use : '.' .
But i don't find the parameter aclName .
When i was in weblogic 5.1 ,i created permission in the file
weblogicURL.policy with the syntax : " Permission
weblogic.security.acl.URLAcl "weblogic.url",".../x.jsp" " and after
i gave "weblogic.url" as parameter for aclName .
But in version 6.0, I try web.xml, web ? but nothing is good .
Is there any person which have an idea or the solution ?
All the sugestions are welcome !
Thanks by advance !
Good bye .

hi,
maybe a better approach could be to use roles instead of permissons.
Your menu.jsp could look like this:
<%
if(request.isUserInRole("super-user"))
%>
... code HTML where the button "Creation" is created
<%
%>
You can map the role 'super-user' to an individual principal or a
user group in weblogic.xml. In that case only users that are in
the mapped group/principal will see the 'creation' link. So simply
add user 'system' to a group 'super-user'.
regards,
przemek
Marc Alfonsi schrieb:
Hi Kirann and everybody!
Thanks for your message .
I'm going to explain better than the first time .
I set up security-constraints in my web.xml .
For example only "system" can access to the directory Creation and
all its .jsp , and the others users no .
Now ,in my code , there is a jsp : menu.jsp which displays some
possibilities : creation of an employee , visualisation ...with HTML
code : button "Creation" which call a .jsp of the directory Creation .
Actually , if a user different of "system" try to click on the button
"Creation" there is a dialog box of login . The user writes its loggin
but the access is prohibited ( because security-constraint in web.xml
).It's normal but not very well .I would like that a user who don't
have access to the functionality "Creation" don't see the button
"Creation" !
So in menu.jsp , i would like to use the method hasPermission at the
location of the button "Creation" is created with HTML code :
<%
if weblogic.security.acl.Security.hasPermission(.....,new
weblogic.security.acl.PermissionImpl("/Creation/x.jsp"),'.')
%>
code HTML where the button "Creation" is created
<%
%>
But my problem is that i don't know the first parameter which
correspond
to aclName .
Any suggestions are welcome .
Thanks for help .

How configure the credit limit at sales order level

Hi
how can i configure the credit limit at sales order level..
ex: when i create sales order ... if exceeds the sales order value to credit limit value ...sysyem does not accept to save this sales order ...is it possible...pls help me in this issue
regards
sesidhar

Hiiiii
It is very much possible in SAP
first you have to create credit control area
then assign your company code to your credit control area
then create your customer and assign credit control area in billing tab (for that u have to activate credit control area for your transaction by OB20)
Then go to t-code VOA8
assing credit check to your sales document type
create credit control area automatic with your credit control area.
Regards
Shambhu Sarkar

How: Using the same control panel for multiple vi and propogating changes to the control panel.

I have created a labview project that contains about 40 vi. Each vi has a control panel in common that is a group of ip address, or port address, and settings that are passed from high level vi to low level vi for the purposes of controlling and accessing our daq cards. As this control panel exist in all vi's and is required to be identical there is a problem when needing make a change or update the controls during development. The problem is how much time it takes to go and change every single vi's control panel. I wish to have a way of propogating a change in the control panel across all vi simultaneously.
All control in the control panel are in a bundle, so all values are passed in 1 wire.
I tried turning the control panel into a sub vi, and this way I can just "create control" and have outputs of the vi maniuplate settings, however if I update the vi, I still have to go back and create a new control for each vi as the control has changed.
I have tried using the subpanel and creating the control panel in a sub vi that is displayed in the subpanel, but this gives the unwanted consequence of not being able to view or change settings on the control panel if the program is not running, as subpanels blank out when the program is not running.
Is there another way to dispaly a subvi's front panel beside using a sub panel? Is there a better way to propogate changes in a bundle throughout a series of vi?
JW
Solved!
Go to Solution.
Attachments:
Labjack Comm Settings.vi ‏15 KB

Yes a type def would help you out and I'd take the next step to make it a strict type def if you want the appearence to be the same across all of its instances. You can also review this Nugget on Type definitions for more idea on this topic.
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How use the same variable in read and write way?

I don't know how to use the same variable in a .vi like an indicator and a
control at the same time.
Can someone help me?
Thnks.

Thanks!!!
I'll try.
"Adam Russell" escribió en el mensaje
news:bkavdl$rd021$[email protected]..
> Create local variables from the control (or indicator) and you can make
> each local either read or write. Be careful of race conditions.
>
> "Urban" wrote in message
> news:bkam3b$c4k$[email protected]..
> > I don't know how to use the same variable in a .vi like an indicator and
a
> > control at the same time.
> > Can someone help me?
> >
> > Thnks.
> >
> >
>
>

How use the function add_months() in a mapping??

Hi,
I have a variable in ODI with a date and i need add other variable to add "x" months...
How do I can do that?
thanks,

So are you saying you have variable1 holding a date e.g. 1/1/2015 and variable 2 holding a number of months e.g. 7?
If so in your mapping expression just use the date functions available to your (stage/target) database technology and substitute the variable into the function
i.e. for Oracle your mapping would be ADD_MONTHS(#Variable1, #Variable2)

How use the contract reference in iDoc ORDERS

Similar Messages

Maybe you are looking for