How use the function add_months() in a mapping??
Hi,
I have a variable in ODI with a date and i need add other variable to add "x" months...
How do I can do that?
thanks,
So are you saying you have variable1 holding a date e.g. 1/1/2015 and variable 2 holding a number of months e.g. 7?
If so in your mapping expression just use the date functions available to your (stage/target) database technology and substitute the variable into the function
i.e. for Oracle your mapping would be ADD_MONTHS(#Variable1, #Variable2)
Similar Messages
-
Hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to
hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to click on the fn + function key
Hi,
You can change this in your system bios as described in the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How to use the function module 'HR_ES_FEATURE_BACKFIELD'
Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.hey iam from functional side can u be little bit clear of that feature
thanks
sikindar -
Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help
Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.
-
how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS
little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction. -
How to use the function STRIP SILENCE on many regions at the same time?
Hi,
I am doing a projet with a lot (more thant 100) of audio regions, and I would like to use the function STRIP SILENCE on many regions at the same time (with the same parameters).
Here is what happens :
1- I select many regions (10 or so)
2- I choose the function STRIP SILENCE in the AUDIO menu
3- the window for stripping silence opens, and it tells me in it that there are 10 regions selected (if I selected 10)
4- I put my parameters, then I click OK
5- Only the first regions is done! all other regions are untouched.
So... it this a bug or a feature? What am I doing wrong? Is it really working on multiple regions at the same time? If not, how could I do that besides doing the same operations 100 times!
Could that be on the Intel bug that I see quite often ("it works on old Mac but not on Intel Mac")?
Thanks,
DanielI think the message you get saying that 10 regions have been selected is not so much a bug as an oversight ---- someone didn't check to correlate the message with the actual functionality of strip silence (i.e., will only work on one region at a time).
So the message is misleading.
I find that it's best to set up a key command to perform the strip silence function. Makes the process go faster than having to mouse around. And I rarely find that the strip silence settings for one region work well on another, so I don't mind the fact that it only works to strip one region at a time.
Sure, it would be cool if it performed the operation on multiple regions, but by using the same set of s/silence parameters for all regions there's always the chance that you might accidentally crop a region in the wrong way, meaning more time spent editing the beginning/end of those regions. -
How to use the Function Module RH_READ_INFTY_1001...
Hi,
Can any one Tell me .. How to do the same functionality .. given below (select).
Using the Function Module RH_READ_INFTY_1001...
*reads CP (Central Person) based on BP (Business Partner)
Select single objid (Object ID)
from hrp1001
into gv_sobid
where subty eq 'B207'
and sclas eq 'BP'
and sobid eq is_header-partner.
*reads P (Person) Based on determined BP (Business Partner)
select single sobid (ID related Object)
from hrp1001
into gv_sobid
where subty eq 'B209'
and otype eq 'CP'
and objid eq gv_sobid.
*determines UserID from IT0105 for determined personell ID
select single usrid
from pa0105
into gv_usrid
where pernr eq gv_sobid
and subty eq '999'.
Reply ASAP....
Answers will be Rewarded...objects-plvar = l_plvar.
objects-otype = 'S '.
objects-sobid = l_positions-objid.
APPEND objects.
CLEAR i1001_itab. REFRESH i1001_itab.
CALL FUNCTION 'RH_READ_INFTY_1001'
EXPORTING
* AUTHORITY = 'DISP'
* WITH_STRU_AUTH = 'X'
istat = '1'
* EXTEND = 'X'
subty = 'A008'
begda = l_keyda
endda = l_keyda
* CONDITION = '00000'
* SORT = 'X'
* WITH_EV = ' '
* ADATA = 'X'
TABLES
i1001 = i1001_itab
objects = objects
EXCEPTIONS
nothing_found = 1
wrong_condition = 2
OTHERS = 3.
IF sy-subrc <> 0.
CLEAR i1001_itab. REFRESH i1001_itab.
CLEAR mngr_nr.
ELSE.
READ TABLE i1001_itab WITH KEY sclas = 'P'.
IF sy-subrc = 0.
mngr_nr = i1001_itab-sobid.
ELSE.
THis is the sample code to use function module using this function module you can get upto HRP1001 selection for userid you need to use same select you write for PA0105 -
How to use the function module CONVERSION_FACTOR_GET?
Hi Experts,
I have to use convert the value of a field from units 'HL' to 'HHL'. According to me, we can use the function module CONVERSION_FACTOR_GET. However, i am not able to know how to use it?
Can anyone explain how to use the FM, i mean what should be the importing and exporting parameter.... For recap, i need to convert HL to HHL, for example 3 HL to 0.03 HHL.
Please help.
Rewards for sure!
Thanks in advance.
AkshHi
If it is Unit Conversion better use the following Fun modules
UNIT_CONVERSION_SIMPLE
MD_CONVERT_MATERIAL_UNIT
goto SE37 first and execute them by entering some value and then use it in the code after confirming it
Regards
Anji -
How to use the function SOMME.SIS for a specific month ?
Hello,
I want to use the function SOMME.SIS with a condition that would be a specific month of the year. Does anyone know how to do that ?Hi Amir,
Ahaa! SUMIFS
Here is Table 1
Date
Month
Product
Sold
2 January
January
A
20
3 January
January
A
40
3 January
January
B
50
5 February
February
A
10
6 February
February
B
5
7 February
February
A
15
8 February
February
B
2
Table 2
Month
A
B
January
60
50
February
25
7
March
0
0
April
0
0
May
0
0
June
0
0
July
0
0
Formula in B2 (and Fill down and Right)
=SUMIFS(Table 1::$D,Table 1::$B,$A2,Table 1::$C,B$1)
Regards,
Ian.
Edit: Your region may use ; instead of , in formulas. Ian. -
How to use the function module ....
hi
how to use the function module ssf_function_module_name in smartformsHi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu -
Regarding how to use the function module *control_form* in scripts
HI friends,
Can any one tell why and where do we use the function module control_form in scripts. Can you give me a small scenario how to use in scripts.hi satish,
by using this function module we can pass the control
commands to FORM THROUGH ABAP/4 PROGRAM.
see the following example:
TABLES: kna1.
DATA: BEGIN OF it_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
ort01 LIKE kna1-ort01,
land1 LIKE kna1-land1,
END OF it_kna1.
DATA:records TYPE i,
window TYPE i value 1.
select-options:s_kunnr for kna1-kunnr.
SELECT kunnr name1 ort01 land1 FROM kna1 INTO TABLE it_kna1
where kunnr in s_kunnr.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZSCRIPT4'
language = sy-langu.
LOOP AT it_kna1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ELE1'
function = 'SET'
type = 'BODY'
window = 'MAIN'.
DESCRIBE TABLE it_kna1 LINES records.
IF window lt records.
window = window + 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks,
raji -
How to use the function module /IRM/IPBB_AGREEMENT_CREATE.
Hi all,
Please help me how to use the function module /IRM/IPBB_AGREEMENT_CREATE.
It is a Vistex fuction module which is used to create Sales contract in SAP-Vistex. If anyone has use the function module and do have the sample code please share it.
Thanks.FORM create_agreement TABLES pt_agreement
CHANGING po_agreement .
CONSTANTS: c_strt_knumh TYPE knumh VALUE '0000000000'.
DATA: lc_kona TYPE /irm/s_gkona,
lc_cbasp TYPE /irm/s_ipcbasp,
lt_cbapr TYPE /irm/t_ipcbapr, "Partners
lc_cbapr TYPE /irm/s_ipcbapr,
lt_cbadt TYPE /irm/t_ipcbadt, "Dates
lc_cbadt TYPE /irm/s_ipcbadt,
lt_cbafs TYPE /irm/t_ipcbafs,
lc_cbafs TYPE /irm/s_ipcbafs,
lt_cbacn TYPE /irm/t_ipcbacn,
lc_cbacn TYPE /irm/s_ipcbacn,
lt_cbacl TYPE /irm/t_ipcbacl,
lc_cbacl TYPE /irm/s_ipcbacl,
lt_cbtpv TYPE /irm/t_ipagtpv,
lc_cbtpv TYPE /irm/s_ipagtpv,
lt_texts TYPE text_lh,
lc_texts TYPE itclh,
lt_cbasd TYPE /irm/t_ipcbasd,
lc_cbasd TYPE /irm/s_ipcbasd,
lc_agreement TYPE /irm/s_ipcbasp_doc,
lc_e_log_number TYPE balognr,
lt_messages TYPE /irm/t_gprolog.
DATA: lt_vake TYPE cond_vakevb_t,
lc_vake TYPE LINE OF cond_vakevb_t,
lt_konh TYPE /irm/t_gkonh,
lc_konh TYPE LINE OF /irm/t_gkonh,
lt_konp TYPE /irm/t_gkonp,
lc_konp TYPE LINE OF /irm/t_gkonp,
lt_konw TYPE /irm/t_gkonwu,
lc_konw TYPE LINE OF /irm/t_gkonwu,
lt_konm TYPE /irm/t_gkonmu,
lc_konm TYPE LINE OF /irm/t_gkonmu,
lt_komg TYPE /irm/t_gkomg_index,
lc_komg TYPE LINE OF /irm/t_gkomg_index,
lt_user_data TYPE /irm/t_gpraxfu_index,
lc_user_data TYPE LINE OF /irm/t_gpraxfu_index.
DATA: lc_updt(1) TYPE c.
DATA: lc_knumh TYPE knumh.
DATA: BEGIN OF lc_str_knumh,
hd(2) TYPE c VALUE '$$',
inc_num(8) TYPE c,
END OF lc_str_knumh.
DATA: blank_agree_key TYPE knuma VALUE '~~~~~~~~~~'.
FIELD-SYMBOLS <konh_line> LIKE LINE OF lt_konh.
FIELD-SYMBOLS <konp_line> LIKE LINE OF lt_konp.
DATA: lc_rule TYPE type_key_rule.
READ TABLE pt_agreement INTO lc_rule INDEX 1.
SELECT SINGLE * FROM kona
WHERE vkorg = lc_rule-vkorg
AND vtweg = '10'
AND spart = '10'
AND boart = 'ZPS1'
AND botext = lc_rule-sap_agkey.
IF sy-subrc = 0.
lc_updt = 'U'.
ELSE.
lc_updt = 'I'.
ENDIF.
LOOP AT pt_agreement INTO lc_rule.
MOVE sy-tabix TO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
WHILE lc_str_knumh-inc_num+7(1) = ' '.
CONCATENATE '0' lc_str_knumh-inc_num INTO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
ENDWHILE.
CONCATENATE '$$' lc_knumh INTO lc_knumh.
MOVE lc_str_knumh TO lc_knumh.
MOVE c_strt_knumh TO lc_knumh.
CLEAR: lc_konh, lc_konp, lc_komg.
MOVE: lc_rule-vkorg TO lc_komg-komg-vkorg,
'10' TO lc_komg-komg-vtweg,
'10' TO lc_komg-komg-spart,
p_waers TO lc_komg-komg-waerk,
'1300' TO lc_komg-komg-bukrs,
lc_rule-lifnr TO lc_komg-komg-lifnr,
lc_knumh TO lc_komg-knumh,
lc_knumh TO lc_konh-knumh,
lc_knumh TO lc_konp-knumh,
lc_rule-datab TO lc_konh-datab,
lc_rule-datbi TO lc_konh-datbi.
CASE lc_rule-tablnam.
WHEN 'A701'. "Every Agreement will have a A701 rule -
"Therefore we acn setup the header using A701
MOVE: 'New ' TO lc_kona-knuma,
lc_rule-vkorg TO lc_kona-vkorg,
'10' TO lc_kona-vtweg,
'10' TO lc_kona-spart,
'ZPS1' TO lc_kona-boart,
'C' TO lc_kona-abtyp,
'V' TO lc_kona-kappl,
p_waers TO lc_kona-waers,
lc_rule-knuma_ag TO lc_kona-abrex,
'ZPS2' TO lc_kona-kobog,
lc_rule-datab TO lc_kona-datab,
lc_rule-datbi TO lc_kona-datbi,
lc_rule-sap_agkey TO lc_kona-botext,
'1300' TO lc_kona-bukrs,
'I' TO lc_kona-updkz.
MOVE: 'New ' TO lc_cbasp-knuma_ag,
'ZPS1' TO lc_cbasp-boart_ag,
p_waers TO lc_cbasp-waers,
'A' TO lc_cbasp-setl_mth,
'B' TO lc_cbasp-setl_typ,
'A2' TO lc_cbasp-ident,
'E' TO lc_cbasp-setlm,
'ZPDA' TO lc_cbasp-pargr,
'X' TO lc_cbasp-npric,
'LF' TO lc_cbasp-stprl,
lc_rule-lifnr TO lc_cbasp-stpar,
lc_rule-contract_rev TO lc_cbasp-rvnum,
'I' TO lc_cbasp-updkz.
CONCATENATE: blank_agree_key
lc_rule-lifnr INTO lc_konh-vakey.
MOVE: lc_rule-lifnr TO lc_konp-lifnr.
WHEN 'A703'.
CONCATENATE: blank_agree_key
lc_rule-kunnr INTO lc_konh-vakey.
MOVE lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A709'.
CONCATENATE: blank_agree_key
lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_konh-vakey.
CONCATENATE: lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_komg-komg-prodh.
WHEN 'A710'.
CONCATENATE: blank_agree_key
lc_rule-matkl INTO lc_konh-vakey.
MOVE lc_rule-matkl TO lc_komg-komg-matkl.
WHEN 'A711'.
CONCATENATE: blank_agree_key
lc_rule-matnr INTO lc_konh-vakey.
MOVE lc_rule-matnr TO lc_komg-komg-matnr.
IF lc_rule-kschl = 'ZPPL'.
MOVE: 'C' TO lc_konp-krech,
'CAD' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-net_po_price * 1.
ENDIF.
WHEN 'A717'.
WHEN 'A718'.
CONCATENATE: blank_agree_key
lc_rule-zzextwg INTO lc_konh-vakey.
MOVE lc_rule-zzextwg TO lc_komg-komg-zzextwg.
WHEN 'A719'.
CONCATENATE: blank_agree_key
lc_rule-werks INTO lc_konh-vakey.
MOVE lc_rule-werks TO lc_komg-komg-werks.
WHEN 'A721'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-werks INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A722'.
CONCATENATE: blank_agree_key
lc_rule-vkbur INTO lc_konh-vakey.
MOVE lc_rule-vkbur TO lc_komg-komg-vkbur.
WHEN 'A724'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-vkbur INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr,
lc_rule-vkbur TO lc_komg-komg-vkbur.
ENDCASE.
MOVE: 'A' TO lc_konh-kvewe,
lc_rule-tablnam+1(3) TO lc_konh-kotabnr,
lc_rule-kappl TO lc_konh-kappl,
lc_rule-kschl TO lc_konh-kschl.
REPLACE ALL OCCURRENCES OF '~' IN lc_konh-vakey WITH ' '.
APPEND lc_konh TO lt_konh.
CLEAR lc_konh.
*--- Add in the KONP.Do we need to add
MOVE: lc_rule-kappl TO lc_konp-kappl,
lc_rule-kschl TO lc_konp-kschl,
'G' TO lc_konp-krech.
IF lc_rule-kschl+3(1) = '%'.
MOVE: 'A' TO lc_konp-krech,
'%' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-rebate_perc * 1.
ENDIF.
APPEND lc_konp TO lt_konp. CLEAR lc_konp.
APPEND lc_komg TO lt_komg. CLEAR lc_komg.
ENDLOOP.
IF lc_updt = 'I'.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CREATE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_CALL_FROM_WS = ' '
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacn = lt_cbacn
it_cbacl = lt_cbacl
it_cbtpv = lt_cbtpv
it_texts = lt_texts
it_cbasd = lt_cbasd
IMPORTING
es_agreement = lc_agreement
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
creation_failed = 3
new_pricing_not_maitained = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ELSE.
MOVE: lc_agreement-knuma_ag TO po_agreement,
lc_agreement-knuma_ag TO lc_kona-knuma.
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ELSE.
MOVE-CORRESPONDING kona TO lc_kona.
ENDIF.
LOOP AT lt_konh ASSIGNING <konh_line>.
MOVE lc_kona-knuma TO <konh_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
LOOP AT lt_konp ASSIGNING <konp_line>.
MOVE lc_kona-knuma TO <konp_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
lc_kona-updkz = 'U'.
lc_cbasp-updkz = 'U'.
CLEAR lt_messages.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CHANGE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_INIT_DATA = 'X'
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacl = lt_cbacl
it_cbacn = lt_cbacn
IT_FIELDS =
it_texts = lt_texts
IMPORTING
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
cs_agreement = lc_agreement
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
change_failed = 3
agreement_locked = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ENDFORM. " CREATE_AGREEMENT -
How to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'
Dear Experts,
Can anyone Explain me how to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'.My Requirement is i want to change the Partners of the Service Order.It is Very Urgent Requirement Please Help me.
Thanks & Regards,
Ashok.Hi,
For service order you can use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' as it is much easier to use.
Sample code is below. You can use that:
"fill the details of partner which is
"to be added as main partner or in place of Interaction Agent
wa_partner_new-ref_guid = w_guid_ref.
wa_partner_new-ref_handle = '0000000000'.
wa_partner_new-ref_kind = 'A'.
wa_partner_new-kind_of_entry = wa_partner-kind_of_entry.
wa_partner_new-ref_partner_handle = '0000'.
wa_partner_new-ref_partner_fct = 'Z_IA'.
"wa_partner-partner_no : New partner no.
wa_partner_new-ref_partner_no = wa_partner-partner_no.
wa_partner_new-ref_no_type = wa_partner-ref_no_type.
wa_partner_new-ref_display_type = wa_partner-ref_display_type.
wa_partner_new-display_type = 'BP'.
wa_partner_new-no_type = 'BP'.
wa_partner_new-partner_fct = 'Z_IA'.
"w_partner_no : Old partner no. which is to be changed
wa_partner_new-partner_no = w_partner_no.
wa_partner_new-mainpartner = 'X'.
INSERT wa_partner_new INTO TABLE it_partner_new.
wa_partner_newx-display_type = 'X'.
wa_partner_newx-no_type = 'X'.
wa_partner_newx-partner_fct = 'X'.
wa_partner_newx-partner_no = 'X'.
wa_partner_newx-mainpartner = 'X'.
INSERT wa_partner_newx INTO TABLE it_partner_newx.
IF it_partner_new[] IS NOT INITIAL AND it_partner_newx[] IS NOT INITIAL.
"maintain all changes to be done
CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
TABLES
partner = it_partner_new
partnerx = it_partner_newx.
CLEAR : wa_guid1.
REFRESH : it_guid1.
wa_guid1-guid = w_guid_ref.
APPEND wa_guid1 TO it_guid1.
"save the changes
CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
TABLES
objects_to_save = it_guid1.
"commit the transaction
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Reply fro any further help.
Please reward points if helpful.
Regards,
Ashlesha -
Hi:
About HR infotype 0024,As qualification data goes to the OM Infotypes, How to use the function moudle:RHPP_Q_PROFILE_WRITE?
thank you.thank you and the 'BAPI_QUALIPROF_CHANGE' can wok.
DATA:it_profile_add TYPE bapiqualific_tab OCCURS 0 WITH HEADER LINE,
it_profile_delete TYPE bapiqualific_tab OCCURS 0 WITH HEADER LINE,
it_return TYPE bapireturn1 OCCURS 0 WITH HEADER LINE.
it_profile_add-obj_id = '20000116'. "Q ID
it_profile_add-rating = '0001'. "精通程度
APPEND it_profile_add.
CALL FUNCTION 'BAPI_QUALIPROF_CHANGE'
EXPORTING
plvar = '01'
otype = 'AP' "申请者
sobid = '00000170' "PERNR NUMBER
IMPORTING
return = it_return
TABLES
profile_add = it_profile_add
profile_delete = it_profile_delete
ERR_PROFILE =
CHANGE_PROFILE =
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE 'FAILED' TYPE 'I'.
ELSE.
MESSAGE 'SUCCESS' TYPE 'I'.
ENDIF. -
How to find Job relationship using the Function Module RH_STRUC_GET
Hi Experts,
I am getting O-S-P relation ship using for an org unit using the function module RH_STRUC_GET.
Further If I want the job relation ship, how it can be found out.
Thanks in Advance,
IrfanHello Irfan,
Have a look at the table T778A for evaluation path you require and pass this to the function module.
Regards,
Manoj.
Maybe you are looking for
-
My MacBook Pro isn't recognising my SD card
I have previosuly imported photos from the SD card in my camera although today when I try and do it it's not even recognising my card, it's not rejecting it or saying there is a fault it jsut does nothing when I put it in... Any suggetions?
-
First Play drop down menu not working
I have DVD Studio Pro 2. I created a DVD for my sister's school assignment and it worked fine then. Now I need to create a DVD for my client. The First Play selection menu goes blank when I click on it as well as the Title, Menu, and Return selection
-
when i try to video chat it works for 30 sec then the person im chating withs video freezez but audio still works great. i checked and conection says its fast. i also checked if my lap top had all requirerments and it does. I asked the other person a
-
A third party plug-in disappears after a localization patch installation
I have a third party plug-in installed for PhotoShop CS3. The third party plug-in disappears after installation of a localization patch. I tried reinstalling the plug-in, but that does not work. It appears that after the patch is installed, tw10428.d
-
How to store a Excel document using Webdynpro
Hi Folks, I need a Web application, where user will have an option of uploading an Excel file. Then the application should store this file in application server in Excel format. Then I need another web application where, I will display a tabular str