How was SoundTrack Pro created?  Who?

I gather than Soundtrack Pro is a rather different program than Soundtrack, which I have never used.
If it is rather different, where did it come from? How was it created/who created it? Did it originate in the purchase of some earlier program?
If it was not purchased, but created in-house, who created it? What else have they created for Apple?
Could it be that some of the Logic people wrote SoundTrack Pro?
Will mastering SoundTrack Pro be a good starter for learning Logic Pro or will it just makes things worse?
LM

muzak,
My conclusion via STP is to get the biggest, fastest external Hard Drive which will work from my firewired PowerBook. Run cooler. Also want quiet as I can get. I guess I will get used to plugging and uplugging hard drives.
My chopper time was in piston-engined jobs, pre-Vietnam. The jet-turbine powered choppers had not yet arrived. Our biggest was the H-21, the so-called Flying Banana. I flew co-pilot in one of those. My primary helicopters were the Bell H-13, probably familiar to you with its big bubble front end and tubular fuselage, and the Hiller H-23, with a metal-covered fuselage. The first models had a slanty windshield, but later ones had a bubble, like the Bell.
I was in VietNam in 1962, as a civilian doing a market survey for North American Aviation. The Vietnamese regarded me as a CIA agent. I went with South Vietnamese Army elements as the only caucasian almost to the Cambodian border. Took a lot of pictures.
I had been home only a short time when the infamous battle of Ap Bac occurred, giving the Viet Cong their first big victory. Americans were killed, four Flying Bananas went down, plus one Huey. I was very popular on the military briefing circuit for a time after that, with my current pictures of the then almost unknown VietNam.
No Chinooks. They came later.
LM

Similar Messages

  • How was this SWF created?

    Hi. How was this video created? It displays the name "Joe
    Schmoe" throughout; this could be any text, by the way.
    http://www.cnnbcvideo.com/?nid=lRbWr4wkznBWkEcCraq91zQ5Njc2NA--&referred_by=14859716-SGF0a 4x
    What software would you need? Any examples of how one might
    create this? Thanks.
    [Please note: I'm not responsible for the political content
    of the video; I work for a non-profit who would like to create a
    video like this for fundraising. Thanks.]

    It could be one of the effects in Swish.
    "xJaNx" <[email protected]> wrote in message
    news:e5n44s$le9$[email protected]..
    >i was just curious how was this effect created are there
    online tutorials
    >
    > <a target=_blank class=ftalternatingbarlinklarge
    > href="
    http://www.olmosphoto.com/v2/index.html
    >
    > the">
    http://www.olmosphoto.com/v2/index.html
    >
    > the</a> letters are scrambled and then change so
    fast in the logo to the
    > correct stance
    >
    > how is that done ?
    >
    > can someone help
    >

  • How was SiteCatalyst Netverages created?

    Can I ask what software, plugins etc have been used to create the dynamic visuals for SiteCatalyst NetAverages??
    I really like the infogrphic presentation and usability that it delivers.
    Thanks
    Matt

    It could be one of the effects in Swish.
    "xJaNx" <[email protected]> wrote in message
    news:e5n44s$le9$[email protected]..
    >i was just curious how was this effect created are there
    online tutorials
    >
    > <a target=_blank class=ftalternatingbarlinklarge
    > href="
    http://www.olmosphoto.com/v2/index.html
    >
    > the">
    http://www.olmosphoto.com/v2/index.html
    >
    > the</a> letters are scrambled and then change so
    fast in the logo to the
    > correct stance
    >
    > how is that done ?
    >
    > can someone help
    >

  • How was this effect created?

    Hi,
    Can anyone tell me what was done to create the cool effect at this site?
    www.robbiecrawford.com
    When the links on the left are rolled-over an image appears in a small window that follows the cursor. Very cool.
    I was hoping to learn how to do that, myself, but can't figure it out. No need for a step-by-step tutorial, just a word or two to point me in the right direction.
    THANK YOU!

    It could essentially involve a movieclip that follows the mouseY property with a minor bit of tweening to a stop, possibly triggered by a MOUSE_MOVE event.  Hover over/out of the individual menu items loads/unloads a preview image in the movieclip.

  • How does soundtrack pro hold up?

    I am a broadcasting student and working a good amount with adobe audition editing audio, I am please with adobe but obviously on a mac cannot run it, i have been shopping around for other applications such as pro tools ect and would appreciate any feedback on soundtrack pro i would be using it mostly for radio promos, commercials, bits ect. thanks for the help

    jebus! I use STP every day for TV/Film sound design projects.
    it was a bit buggy at first, but since the last couple of releases it's been super stable. what version are you guys running? I use v1.0.3. it does have a few shortcomings - fade option & moving automation with clips being my main gripes, but I've been working with music apps for 15 years (ATARI days) and it's the 1st app I reach for on a audio editing/sound design project.
    I also use Logic Pro for my music composition, but bring all my mixes into STP.
    I just finished 2 short films using STP...
    one for an oscar nominated director ...
    http://www.ruairirobinson.com/main.htm
    and this one too ..
    http://www.alonelysky.com/ALSSDTRAILER.htm
    lots of TV work here ...
    http://www.echo-lab.com/echonew.html
    http://www.echo-lab.com/
    gavin little
    echolab
    dublin, ireland
    http://www.imdb.com/name/nm1962022/
    G5 Dual 2Ghz + G4 Powerbook   Mac OS X (10.4.8)   http://www.echo-lab.com

  • How Was This Icon Created?

    Hi,
    I'm fairly new to Photoshop and would like to find out how an icon was created on a website I've found.  It's the small 'heart and bandage' at the top of the page.  If anyone can help I'd be very, very grateful.  This website is something to do with Surviving Infidelity
    Thanks in advance for any help

    Make the heart with the Custom Shape tool.
    Add a Gradient Overlay (radial).
    Make two little rectangles and align them at right angles with the transform tool.
    I gave them a drop shadow to make them stand out better.

  • How was this background created?

    Hi,
    From this site:
    https://www.softwarekey.com/
    I've downloaded the attached jpg image.
    Notice the background has a nice wash or maybe soft stone effect. I'm talking about the soft diagonal lines. Not the gradient so much. Can someone give me pointers how to get this? I've tried brushes, patterns, textures. I've tried various gradients. And I don't even get close.
    TIA.

    a combination of Filter->Render->Fibers, Filter->Blur->Motion Blur and Filter->Blur->Surface Blur should get you close enough (it'll be a grayscale so you'll have to set it to the Overlay or Soft Light blend modes at reduced opacity). Can't give you exact numbers because in the short time i've been messing with it i haven't been able to get it to look exactly like that but it's close enough

  • No Video when using the "Send To Soundtrack Pro Audio File" Command

    Hello FCP Users,
    After reading and rereading the FCP and STP manuals and scouring the boards; I still can not figure out how to view my video clip while I'm editing/sweetening audio in STP. I have even used the DVD tutorial in an attempt to figure it out (all works fine and good with the tutorial example), but I'm stuck here the real world.
    I'm thinking their must be some preference setting somewhere in STP that I've missed. Any suggestions would be greatly appreciated!!!
    Best regards,
    Jeff
    From the Manual:
    Soundtrack Pro creates a new audio file project (with the file type .stap) for the clip. The clip can contain video and audio or contain only audio.
    In the Final Cut Pro Timeline, Control-click the clip, then choose “Send To >
    Soundtrack Pro Audio File Project” from the shortcut menu."
    Mac Pro, dual core, 3GHz, 8GB Ram   Mac OS X (10.4.9)  

    Rob,
    The audio consists of two separate audio tracks A1 is from a lav mic and A2 is from an on-camera mic.
    It was captured DV.
    If I rt click the video clip in the "video tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
    If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
    I've tried de-selecting the "linked selection" in the tl and rt click the audio clip in the "audio tl" and that allows me to "Send To Soundtrack Pro Audio File" , but no video in the utility window of STP.
    If I select the "linked selection" in the tl and rt click the audio clip in the "audio tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
    If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
    It looked all so simple in the tutorial. I'm going on five hours of trying to find an answer to this issue any other suggestions before I slit my wrists? Thanks for your input.
    Jeff
    Mac Pro, dual core, 3GHz, 8GB Ram   Mac OS X (10.4.8)  

  • While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

    While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
    Any ideas why? and how to get my tracks back?
    I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
    I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
    The 2 songs having the issue are titled Exotic Yearning and Reunion.
    I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
    Any thoughts and help would be greatly appreciated!
    Thanks!

    After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
    It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
    Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
    Very Frusterated...:(

  • Have Soundtrack Pro, how do I "install" loops to FCPx?

    As advised by Apple in 2011 I have FCP7/Studio installed on another startup disk.  I found the Soundtrack Pro audio loops and put them in /Lbrary/Audio/Apple Loops/Apple in the startup disk with FCPx.  When I open up FCPx in the Music & Sound window there are 2 Apple Loops for Soundtrack Pro folders!!  Is this a bug?  Or did I do something wrong?  Should I delete the files in the Apple Loops Index, would that fix things?  I like how finally the Apple for Soundtrack Pro folder is no longer greyed out, but I don't like the extra folder there.
    Also, why is there 2 Final Cut Pro Sound Effects folders, one of them is greyed out.

    I need to get "Soundtrack Pro" inorder to populate the "greyed-out" folders?
    Possibly yes. I bought FCP Studio back in 09. STP was one of the suite applications that came with it (it also came with Logic Pro Studio -- as well as ALL the Jam Packs -- so I effectively bought it twice.)  Since Apple put these apps on the App Store (FCPX/Logic), all the extras you *used to get* aren't there anymore. [You can still purchase Logic Studio from Apple's website store.]
    I've also dragged in 3rd party loops (from siliconbeats.com [they have quite a few free loops available], etc.)
    Also, I really don't know if you even CAN buy STP or the Jam Packs anymore. You can buy Logic Studio and you'll still get STP and all the Jam Pack loops that way... but that's rather expensive for just the loops.
    (*Aria*) -- I don't think the empty STP loops folder is a bug. I think it's there for all of the people who owned previous versions of FCP and had STP installed as part of the suite.
    PS - sorry it took this long - I got cut off due to maintenance last night...

  • How do I export a 2-channel stereo from a Soundtrack Pro master mix?

    I'm using Soundtrack Pro to create a 7-track music mix for a live event in a few weeks. The mixing and balancing of audio levels went fine. But when I exported the project to an AIFF file, the resulting file had 6 channels instead of the normal 2, and its bit rate is 4233 kbps instead of 1411.
    In SP I selected File> Export > Master Mix | AIFF File | 16-bit | 44.1 kHz
    There don't appear to be any options regarding flattening the audio. So how do I create a normal 2-channel stereo AIFF file from my mix?

    Never mind, I figured it out — the problem was that my Submix 1 was marked "1-6" instead of "Stereo 1,2" — problem solved.

  • Soundtrack Pro 2.0.1: stereo level meters in the Meters tab? How?

    I'm using Soundtrack Pro with an M-Audio Firewire 410 to do a live stereo recording. I've created a new audio file project, and I've only got two tracks in the project (left and right channels), but for some reason the Meters tab insists on displaying a 6-channel meter view, instead of stereo meters.
    Page 49 of the Soundtrack Pro 2 user's manual specifically mentions a 2-channel (stereo) meter view (and even includes a screenshot), but I can't figure out how to get this view in my project.
    What am I missing here? Or is this a bug?
    Thanks!
    Scott

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • How do I get a mixer to show up in Soundtrack Pro?

    The problem is not using a mixer but I can't get one to show. I see my sound track, (can play) and did analysis and cleaned up but clicking all mixer buttons and choosing a different layout all 3 choices never give me a mixer.
    The lower pane with the mixer highlighted is blank. I also set up a new project choosing multitrack with mixers or Seperate Mixer and video which show the mixers but as soon as I put my aif file into Soundtrack the mixer disappears from the window only the wave forms are there. I have posted this several times.There must be somebody who has a clue what is going on here? (Apple?)Thank you.
                                                                                                                                          W.W.

    Since nobody could answer my cry for help (no you don't find it in the manual) I am entitled to the 10 points finding the solution. Here is how to get around not being able to get a mixer for your aif file you want to edit. When you double click Soundtrack Pro an empty window opens with an empty track 1 and track 2.
    As a seasoned Apple user you think drag and drop the .aif audio file into those tracks you want to edit and use in your movie. Well you are in for a three day search for answers how to get that mixer to open that you want to use! If somebody (or the manual) would just say you can't do that you could have saved that time to do what you need to do!
    In order to get the mixer(s) you need you must:
    1. click on "New Project" on the top left: window opens with both video and audio mixer tracks in which you can drop you audio. You can than open Layouts and choose from 3 layout choices of mixers. Happy panning and mixing.
                 W.W.

  • My Adobe Acrobat 10 Pro creates PDFs with a graph background.  How do I make the background white?

    My Adobe Acrobat 10 Pro creates PDFs with a GRAPH background.  How do I make the scanned documents have a normal white background?

    This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I will move your post to the correct forum so that it can get proper attention.
    We also have many other forums relating to other Adobe products at: http://forums.adobe.com.
    Out of curiosity, can you tell me how you found our forum page?

  • How do I automatically create bookmarks in adobe using the Scanjet pro 3000 s2?

    How do I automatically create bookmarks in adobe using the Scanjet pro 3000 s2?

    Does the file you are writing have a timestamp in it?  If so you could read the timestamp from the last time it was written and see if the day has changed, handling the name of the file appropriately.  The easiest way to record the timestamp is probably to write the timestamp as the number of seconds that have elapsed since 12:00 am on Firday January 1st 1904 in UT.  The "Get Date/Time in Seconds" function will give you this value.
    Message Edited by jmcbee on 03-05-2009 12:56 PM
    CLA, CLED, CTD,CPI, LabVIEW Champion
    Platinum Alliance Partner
    Senior Engineer
    Using LV 2013, 2012
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Maybe you are looking for

  • Help please with new airport extreme

    hello, my mother is using comcast internet and she wanted to add a wireless router. all the had before i went and got her a ae was the comcast modem with a ethernet wire coming out of it and going right into her laptop. i then installed the software

  • PDF Download in IE 5.5

    I am facing a peculiar problem, regarding Saving PDF to client machine. I am trying to save the pdf file by popping up a Save As dialogue box. This works fine with IE 6.0 and IE 5.5 (basic), but in IE 5.5 SP1,2 the browser opens a Save as Dialogue bo

  • Open Office documents from NSS exported as AFP impossible

    I have my Mac Lion 10.7.4 users accessing user spaces (NW 6.5.8 NSS exported as AFP) It is imposssible to open Office documents (doc?, ppt? etc) Anybody has an idea why that is happening? Seb

  • Problem connecting N95 8GB to pc....

    i got the n95, when u connect the n95 to pc using USB, it prompt pc suite, data transfer, image print and media player.. the pc picks up the n95 when i chose "Data Transfer", u can access the mass memory just like if it was a USB thumb drive. but whe

  • Podcast approval time

    I just submitted a podcast for the first time. What is a benchmark for how long it will take before I know if it was approved or not? Just curious what the average is.