How we can check the output in script

hi friends,
iam raju. new to sap.plz any one reply to my question.
Thanks,
raju

Hi Sreenivasulu,
You can check the output of script in two ways.
1. Directly executing your print program u can see the output of SAP Script.
2. IF you are using any standard scripts you then need to use t-code to see the output.
Ex: if you are copied standard SAP Script (purchase order ) MEDRUCK this is the standard purchase order script.
Copy this into your Zmedruck edit it as per ur requirement then you have to assaig this script to standard print program of purchase order using NACE transaction. Replace MEDRUCK with Zmeduck which u hv edited. Then for Purchase order the T-code is ME9F give the purchase order no and check the output. There you can see the chages you have done in the script.
Hope this will help you.
reward if useful
Regards,
sunil kairam.

Similar Messages

How we can get the output in excel format for Spawned programs?

My requirement is to get the excel output for some of the programs (like -Adjustment Register, Applied Receipts Register). I am trying to achieve this by BI Publisher. But these programs has "Spawned" executable. And when I am changing the output type as"XML" I am getting below error in output-
"XML Parsing Error: syntax error"
Can anyne suggest how we can get an XML output and then excel output for Spawned programs?
Thanks in advance,

Hi,
If I get it right, you want to convert RXi (Reports Exchange) reports such as Adjustment Register & Applied Receipts Register into XML Publisher. Normally, you need to change the "Output Format" of the program called by the "Spawned" program to 'XML' -- not the "Spawned" program itself.
However, I believe RXi reports does not support XML output (atleast in 11i). It could only work on Text & Html format. Check on the metalink note below:
432719.1 - RXi-Only Reports Generate XML Format Exception With No Output Setting the Output Format to XML
Hope this helps.
regards,..
Rownald

Does anyone know how I can check the balance on my itunes gift card?

Does anyone know where I can find out the balance on my daughter's itunes gift card? I can't find it. Thanks!

redeem it

How i can check DB size

How i can check the size of DB in 9i?

I recall, you already ask it Re: Size of DB Check

How I can check this condition

Hi,
Through PLSQL code how I can check the following condition.
I have two field column TEXT1 and TEXT2. Text2 contains total five item
and text1 contain one item, how I can check Text1 against text2 its
existing or not.
:Text1 :='B1'
:Text2 := 'A1,B1,C1,D1'
I have tried the following way, but it is not working
IF :Text1 IN (:TEXT2) THEN
DISP_MSG('EXIST');
END IF;
Regards,
Jen.

Or
sql>
declare
text1 varchar2(10) := 'B1';
text2 varchar2(20) := 'A1,B1,C1,D1,E1';
begin
dbms_output.put_line(case when text2 like '%'||text1||'%' then 'Exists'
                           else 'Not exists'
                      end );
end;
Exists
PL/SQL procedure successfully completed.
jeneesh

Sap isu-cic(how to check the output)

HI to all......
In isu-cic how to check the output,i have done all the assign ments like framewrk creation etc...i defined the organizational structure with assign hoder...after that wats the next steps?
can anybody plz reply....
Cheers..
sateesh

Hello satish
Step 1:
Create Framework Id( assign hidden & visible components)
Step 2: Create CIC profile
Step 3: create Org unit and assign person
Step 4: Assign CIC profile to Org. unit (or) person
Path : Easy access screen
Logistics>Customer service>Customer Interaction center>Adminstration>CIC structure>Org.Structure(Change,T.code-PPOMW)>select Org. unit
In this screen on the top i.e menu bar find Go To
Go To>detail Object>Enchanced object description
Now u r in Maintain object page(T code-PP01)
Now in the Active tab page select CIC profile
Now in menu bar Edit>create infotype
Again u r in new page(T code-PP01)
Enter the CIC profile Id which u have created in customizing
Run T code- CIC0
I hope u r able to see the screen now
Rgds
Madhusudhan

How do I check the java script is up to date?

When I am on facebook or any site like that it takes for ever to load the pages.

"How do I check the Java script is up to date?"
You can visit these two sites and check updates for your plug-ins:
1. http://www.mozilla.com/en-US/plugincheck/
2. http://www.java.com/en/download/installed.jsp

I have my iphone 5 but a lost. The box where it came how i can check of how many gb its ?

I have my iphone 5 but a lost. The box where it came how i can check of how many gb its ?

Tap settings
General
About
this provides alist of everything you may need to know about your device

How I can check on the existence of a client ActiveX, so that if there is no download begins?

How
I can check on
the existence of a client
ActiveX, so that
if there is no download begins?
example:
I want tocheck for:
EditDocumentButton = new ActiveXObject "SharePoint.OpenDocuments.2");
if (EditDocumentButton) {
EditDocumentButton.EditDocument (strDocument);
and ifthere is nowarning andlaunch aURLto startthe
download
as is?
thanks

Hello,
This control is defined in the OWSSUPP.dll file, a dynamic-link library (DLL) that is installed in the %ProgramFiles%\Microsoft Office\Office14\ directory on the client computer during Microsoft Office Setup. (Read
full article on MSDN)
Based on my understanding this below link can help you to open file if activex is not found.
http://blog.scosby.com/post/2011/08/22/Remotely-Opening-Office-Files-From-SharePoint-2010.aspx
Now to detect the activex please look this code:
http://www.andrewshough.com/sharepoint/multiple-office-version-support-in-sharepoint-services-3-0/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to check the output of a recordset in Stored Procedure.

Hello,
I need to check the output of below code:
create or replace PROCEDURE GETUSERINFO (p_recordset OUT Types.cursor_type) AS
BEGIN
OPEN p_recordset FOR
SELECT userid,
username,
password,
role,
assignrole,
emailid
FROM tbl_users
WHERE userid=18;
END GETUSERINFO;
Kindly help me.

user12631197 wrote:
Hello,
I need to check the output of below code:
create or replace PROCEDURE GETUSERINFO (p_recordset OUT Types.cursor_type) AS
BEGIN
OPEN p_recordset FOR
SELECT userid,
username,
password,
role,
assignrole,
emailid
FROM tbl_users
WHERE userid=18;
END GETUSERINFO;Kindly help me.in sqlplus do this
var rc refcursor
exec getuserinfo(:rc)
print rcNote: Use {noformat}.. your code here ..{noformat} tags to preserve your code format.

How to run a program in background and how to check the output

I have to run my program as background job... it has a selection screen...... and i need to check the output after its complete.

hi,
u need to create one program for this.
tables:btcevtjob.
parameters:job(32).
data:count like btcevtjob-jobcount.
call the function modules JOB_OPEN,JOB_SUBMIT AND JOB_CLOSE
and pass the parameters in those function modules.
once u execute this program,
go with sm37->provide jobname->select the option scheduled
->execute
selct the entry->go with release option.
under releasae select immediate option
save
select the job name again
go with release
status is in finished stage
now go with spool option
give spool no
go for display
o/p displayed.
before this,go for se38->provide the name of program which u want to run in back ground->seelct variants->change->provide variant name->go for create->provide input value->go with attributes->provide description->save
this variant name u have to give in the job_submit fm.
or
se38->program->execute->in back ground
Reward points if useful,
Thanks,
Usha

How we can see the abap memory data

How we can see the abap-memory data
fine the code below
import lsind
         report_title
         table_name
         report_field
         change_display
         show_hide
         conversion_exits
         table_description
         form_program
         select_form
         update_form
         line_size
         line_count
         records[]
         fields[]
         header_fields[]
         select_fields[]
         xrep[]
         from memory id 'LZUT5U11'.
Regards
santhosh
mail-id : [email protected]

Dear Santosh,
ABAP MEMORY:
A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
The data in the main memory is only visible to the program concerned.
CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
The same occurs when the system processes a LEAVE PROGRAM statement.
LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
When a function module is called, the following steps are executed:
A check is made to establish whether your program has called a function module of the same function group previously.
If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
Within the internal session, all of the function modules that you call from the same group access the global data of that group.
If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
(1) The interface of the called program (standard selection screen, or interface of a
subroutine, function module, or dialog module)
(2) ABAP memory
(3) SAP memory
(4) Database tables
(5) Local files on your presentation server.
For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
By using a variant of the standard selection screen in the program call
By passing actual values for the input fields in the program call
If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
You can use SAP memory and ABAP memory to pass data between different programs.
The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
To release a data cluster, use the FREE MEMORY ID statement.
You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
SET PARAMETER ID '' FIELD .
The memory area with the name now has the value .
You can use the contents of a memory area to display a default value in an input field on a screen.
You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
You can:
(1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
(2) Start the transaction using CALL TRANSACTION or LEAVE TO
TRANSACTION . If you do not want to display the initial screen, use the AND
SKIP FIRST SCREEN addition.
(3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM … ON COMMIT.
Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
Function modules run in the same SAP LUW as the program that calls them.
If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
The statement CALL TRANSACTION allows you to
Shorten the user dialog when calling using CALL TRANSACTION USING .
Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
Programs that are executed with a SUBMIT AND RETURN or CALL
TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
You can use function modules as modularization units within an SAP LUW.
Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
All techniques are suitable for including programs with purely display functions.
Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
Type ‘E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
Lock entries from programs called with CALL TRANSACTION or SUBMIT
AND
RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
Regards,
Rajesh.
Please reward points if found helpful.

How to set up the output device in output determinatin with customer master

Hi,
I am doing the output determination using customer master and not conditions technique. Can anybody please let me know how to set up the output device . I have done the following:
1) assigned output determination procedure DB00001 to acct group 0001
2) added output type BA00 to customer master documents tab with print as the medium.
3) On creating a sales order and changing it its giving the message
BA00 515 No printer defined for output BA00
Please provide me with some suggestions , how to resolve this issue.
thanx
Jayant

1. tcode V/30 -> check BA00 type -> goto "print" tab -> what's set in the "print param." field?
2. IMG ->SD -> basic functions -> output control -> define print parameters -> V1 output -> for BA00 output type -> Assign a default printer. This is related with the "print param." set in step 1.
For example: if "print parame." is set to '1' in V/30, then the default printer is assigned to sales organization.
You can check F4 search help on the "print param." field (in V/30) to see what options you have.
If you want to specify printer by customer account, you may need to use userexit.
Edited by: Harry Wu on Jun 23, 2010 9:18 AM

How we can populate the form data from 2D barcode

Hi All,
Can anyone tell me how we can populate the form data from 2D barcode, will this can be done through script(javascript)?.
Thanks & Regards,
Faisal Afzal

I was hoping someone could put me in the right direction here. I am basically doing the same . I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the Decode->Extract XML process.
The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
<?xml version="1.0" encoding="UTF-8"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
<xfa:data>
<form1>
The XML structure that is expected by the PDF template is as follows
<?xml version="1.0" encoding="UTF-8"?>
<form1>
So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
Thanks

How do i check the data fram in LIN

Hi everyone,
I am using a LIN communication network to check the output data of my slave which is a dimmer module used in cars. There are 3 modes of operation in this module and each mode gives a different data byte response. I am reading out 3 bytes of data from the slave. Now i need to implement a code to check if these data frames read out are correct.
I am not sure how to compare 3 bytes of data in Labview ?
Can anyone help me with this ?

Is this on an iPad? If so go to settings general usage and see how much the app uses.

How we can check the output in script

Similar Messages

Maybe you are looking for