How we can display two list if not using blocked alv ,not scr painter

how we can display two list if not using blocked alv ,not scr painter

1. Once the cell number/service on the 3GS is transfered to the 5, the 3S will become basically an iPod touch until a new sim is in place, correct? We can still use wi-fi and the apps on the phone, and still be able to sync to iTunes, correct? iOS has been upgraded to 6.
1a. With a new Sim, any issue with losing any data/apps on the phone? I dont' think so.
1. Yes. without a sim it has no service, but all other features should be useable normally.
1.a Nope, Data and Apps are independent of the Sim.
2. Once the 5 is activated on the new carrier, how do I share the apps within iTunes? Is it as easy as using iCloud (which we haven't "activated" yet) and/or plugging both phones into iTunes and transferring between devices (authorizing both)? Photos? There are photos on the 3S that we will need on the 5.
2. As long as both Phones use the same Apple ID, the applications can be synced to each through iTunes. Also any downloads on one phone should appear in the other. Again as long as both phones are using the same Apple ID.
3. Reverse order for new apps purchased (understand that not all the iphone 5 apps will work on the 3GS)?
3. If they can be run on the iPhone3GS they should be synced automatically.
4. My husband also has a new iPad, any complications there with three devices? To date, he has not "shared" apps between his 3S and the iPad. He does not have iCloud set up, but plugs into his computer to backup and transfer photos.
4. If all 3 Devices share the same Apple ID all should be synced.
As a word of warning, if all 3 devices use the same Apple ID, messages recieved using iMessage will appear on all 3 devices.
And Conctacts may get overwritten if synced to iCloud (thogh you say he doesn't have one), or merged together.

Similar Messages

Any calendar app that can display two calendars per day side by side?

Is there any app that can display two calendars (data sync with iCloud Calendars) side by side? e.g. one calendar for planning and the other for actual / diary.

Calendar can have two or more calendars calendars listed at the same time.
Each can be a different color for identifidation.
The first screenshot shows that the Medical and Joint calendars are shared calendars.
Will that work for you?

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

Plug the device into the computer.
Select the content desired to sync.
Sync.

How we can select two records in alv report

how we can select two records in alv report

Hello,
You can use the method get_selected_rows.
 CALL METHOD gv_alv->get_selected_rows
 IMPORTING
 ET_INDEX_ROWS =
 et_row_no = lt_selected_rows.
READ TABLE lt_selected_rows INTO ls_selected_row INDEX 1 .
The table lt_selected_rows will contain all the selected rows.
Regards,
Beejal
**reward if this helps

How i can display default error message in alert window

how i can display default error message in alert window
i.e.,
i have a text field with datatype Alpha
if i am giving numbers.etc then it is displaying
FRM-50001: Acceptable characters are a-z,A-z and space
I want to display this message in alert window
please tell how to do this

In the on-error trigger :
Capture error_code and error_text in a variable.
Set the alert title to something meaningful.
Set the alert message equal to the captured error information.
Display the alert.
declare
v_alert varchar2(100) := 'ERROR' ; -- name of alert to use
v_title varchar2(100) := 'Error !' ; -- text to display as title
v_msg varchar2(200) := error_code || ':' || error_text; -- message to display
v_btn number ; -- button pressed
begin
set_alert_property( v_alert, TITLE, v_title );
set_alert_property( v_alert, ALERT_MESSAGE_TEXT, v_msg );
v_btn := show_alert( v_alert );
end;
----------

I would like to know how i can merge two pictures together

I would like to know how i can emerge two pictures together, i want to use one of the pictures as a background and add an element of my other picture which will be transparent

Good day!
Please check out this thread:
http://feedback.photoshop.com/photoshop_family/topics/removing_background_from_image
Regards,
Pfaffenbichler

How copy contact to another list? Not move.

How copy contact to another list? Not move.

Same way you do in most applications when using drag and drop. You hold the control key while dragging the contact or file. You will see a plus sign appear to indicate a copy instead of a move. Hold the control key until releasing the contact in the new location.

Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.

Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.

You will need to find a forum for MS Word since that is the software that you are trying to manipulate in this. If you think the processing/creation of the PDF plays a role then you should ask in the forum for the software that you are using to create the PDF.
This forum is for issue regarding downloading and installing Adobe trial products, so in any circumstance, your issue does not fit in this forum.

How i can deal with oracle file by using php api

how I can deal with oracle file by using php api ?

What has this to do with Reflections and Reference Objects?

How I can show 3D Repousse Tool to use in my window?

How I can show 3D Repousse Tool to use in my window, i can't find out it even when i check in box of Enable OpenGL Drawing (I was instructed from some websites).
Thank you.

You should post your question in the specific application forum.

Problem in Expand when using Blocked ALV list

Hi All,
I am using the Blocked list ALV to display two lists in a program. One among them is a hierarchial ALV. When i click on the Expand button of this ALV it terminates with the runtime error "GETWA_NOT_ASSIGNED".
I was able to use this functionality using similar code in a stand alone hierarchial ALV list in another program without any problem.
I have assigned the Expand Field name as follows in both programs:
wa_layout-expand_fieldname = 'EXPAND'
Any suggestions or help in this would be highly appreciated.
Thanks & Reagrds,
Praveen

Hai Praveen
Check the following Code
*& Report ZALV_BLOCKLIST *
REPORT ZALV_BLOCKLIST NO STANDARD PAGE HEADING
 LINE-SIZE 150
 LINE-COUNT 60(4)
 MESSAGE-ID Z00.
*..Type Definitions for ALV Report
TYPE-POOLS SLIS.
*..Includes
*for ICONs
*INCLUDE <ICON>.
Table/Structure declarations. *
TABLES: MARA,
 MARC,
 T134.
Internal Tables declaration *
*..To store Basic Report fields
DATA:BEGIN OF IT_MARA OCCURS 0,
 MATNR LIKE MARA-MATNR,
 MTART LIKE MARA-MTART,
 MATKL LIKE MARA-MATKL,
 MEINS LIKE MARA-MEINS,
 NTGEW LIKE MARA-NTGEW,
 END OF IT_MARA.
*DATA:BEGIN OF IT_MATKL OCCURS 0,
 MATKL LIKE T023-MATKL,
 WGBEZ LIKE T023-WGBEZ,
 END OF IT_MATKL.
DATA:BEGIN OF IT_MARC OCCURS 0,
 WERKS LIKE MARC-WERKS,
 LADGR LIKE MARC-LADGR,
 MTVFP LIKE MARC-MTVFP,
 DISPR LIKE MARC-DISPR,
 DISMM LIKE MARC-DISMM,
 DISPO LIKE MARC-DISPO,
 END OF IT_MARC.
ALV Type declaration *
DATA:V_NO_DATA TYPE C.
ALV Type declaration *
DATA:V_REPID TYPE SYREPID.
DATA: IT_FIELDCATALOG_MARA TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELDCATALOG_MARA TYPE SLIS_FIELDCAT_ALV,
 IT_FIELDCATALOG_MARC TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELDCATALOG_MARC TYPE SLIS_FIELDCAT_ALV,
 IT_FIELDCATALOG_MATKL TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELDCATALOG_MATKL TYPE SLIS_FIELDCAT_ALV,
 WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
 IT_EVENTS TYPE SLIS_T_EVENT,
 WA_EVENTS TYPE SLIS_ALV_EVENT,
 WA_KEYINFO TYPE SLIS_KEYINFO_ALV.
Selection Screen. *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-H01.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR ,
 S_MTART FOR MARA-MTART .
SELECTION-SCREEN END OF BLOCK B1.
Event:Initialization *
INITIALIZATION.
*Report Name
V_REPID = SY-REPID.
AT Selection Screen. *
AT SELECTION-SCREEN.
Event: Start-of-Selection *
START-OF-SELECTION.
PERFORM FETCH_DATA.
Event: End-of-Selection *
END-OF-SELECTION.
IF V_NO_DATA = ''.
 MESSAGE I010 WITH 'NO DATA TO DISPLAY ! '.
 EXIT.
ELSE.
 PERFORM FILL_FIELDCAT_MARA.
PERFORM FILL_FIELDCAT_MAKT.
 PERFORM FILL_FIELDCAT_MARC.
 PERFORM FILL_LAYOUT.
 PERFORM CALL_ALV_INIT.
 PERFORM ADD_LISTS.
 PERFORM DISPLAY_BLOCK_LIST.
ENDIF.
 FORM DEFINITIONS *
*& Form FETCH_DATA
 text
--> p1 text
<-- p2 text
FORM FETCH_DATA.
SELECT MATNR
 MTART
 MATKL
 MEINS
 NTGEW
 INTO CORRESPONDING FIELDS OF TABLE IT_MARA
 FROM MARA
 WHERE MATNR IN S_MATNR
 AND MTART IN S_MTART.
IF SY-SUBRC <> 0.
 V_NO_DATA = ''.
ELSE.
 V_NO_DATA = 'X'.
 SELECT WERKS
 LADGR
 MTVFP
 DISPR
 DISMM
 DISPO
 INTO CORRESPONDING FIELDS OF TABLE IT_MARC
 FROM MARC
 WHERE MATNR IN S_MATNR.
ENDIF.
ENDFORM. " FETCH_DATA
*& Form FILL_FIELDCAT_MARA
 text
--> p1 text
<-- p2 text
FORM FILL_FIELDCAT_MARA.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = V_REPID
 I_INTERNAL_TABNAME =
 I_STRUCTURE_NAME = 'IT_MARA'
 I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = V_REPID
 I_BYPASSING_BUFFER =
 I_BUFFER_ACTIVE =
 CHANGING
 CT_FIELDCAT = IT_FIELDCATALOG_MARA
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_FIELDCATALOG_MARA INTO WA_FIELDCATALOG_MARA.
 CASE WA_FIELDCATALOG_MARA-FIELDNAME.
 WHEN 'MATNR'.
 WA_FIELDCATALOG_MARA-COL_POS = '1'.
 WA_FIELDCATALOG_MARA-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARA-SELTEXT_L = 'Material NO'.
 WHEN 'MTART'.
 WA_FIELDCATALOG_MARA-COL_POS = '2'.
 WA_FIELDCATALOG_MARA-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARA-SELTEXT_L = 'Mat Type'.
 WHEN 'MATKL'.
 WA_FIELDCATALOG_MARA-COL_POS = '3'.
 WA_FIELDCATALOG_MARA-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARA-SELTEXT_L = 'Mat Group'.
 WHEN 'MEINS'.
 WA_FIELDCATALOG_MARA-COL_POS = '4'.
 WA_FIELDCATALOG_MARA-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARA-SELTEXT_L = 'Measure Unit'.
 WHEN 'NTGEW'.
 WA_FIELDCATALOG_MARA-COL_POS = '5'.
 WA_FIELDCATALOG_MARA-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARA-SELTEXT_L = 'Net Wt'.
 WA_FIELDCATALOG_MARA-DO_SUM = 'X'.
 ENDCASE.
 MODIFY IT_FIELDCATALOG_MARA FROM WA_FIELDCATALOG_MARA INDEX SY-TABIX.
ENDLOOP.
ENDFORM. " FILL_FIELDCAT_MARA
*& Form FILL_FIELDCAT_MARC
 text
--> p1 text
<-- p2 text
FORM FILL_FIELDCAT_MARC.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = V_REPID
 I_INTERNAL_TABNAME = 'IT_MARC'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = V_REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
 CHANGING
 CT_FIELDCAT = IT_FIELDCATALOG_MARC
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_FIELDCATALOG_MARC INTO WA_FIELDCATALOG_MARC.
 CASE WA_FIELDCATALOG_MARC-FIELDNAME.
 WHEN 'WERKS'.
 WA_FIELDCATALOG_MARC-COL_POS = '1'.
 WA_FIELDCATALOG_MARC-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARC-SELTEXT_L = 'PLANT NAME'.
 WHEN 'LADGR'.
 WA_FIELDCATALOG_MARC-COL_POS = '2'.
 WA_FIELDCATALOG_MARC-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARC-SELTEXT_L = 'Loading Group'.
 WHEN 'MTVFP'.
 WA_FIELDCATALOG_MARC-COL_POS = '3'.
 WA_FIELDCATALOG_MARC-OUTPUTLEN = '20'.
 WA_FIELDCATALOG_MARC-SELTEXT_L = 'Checking group'.
 WHEN 'DISPR'.
 WA_FIELDCATALOG_MARC-COL_POS = '4'.
 WA_FIELDCATALOG_MARC-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARC-SELTEXT_L = 'MRP PROFILE'.
 WHEN 'DISMM'.
 WA_FIELDCATALOG_MARC-COL_POS = '5'.
 WA_FIELDCATALOG_MARC-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARC-SELTEXT_L = 'MRP TYPE'.
 WHEN 'DISPO'.
 WA_FIELDCATALOG_MARC-COL_POS = '6'.
 WA_FIELDCATALOG_MARC-OUTPUTLEN = '15'.
 WA_FIELDCATALOG_MARC-SELTEXT_L = 'MRP CONTROLLER'.
 ENDCASE.
 MODIFY IT_FIELDCATALOG_MARC FROM WA_FIELDCATALOG_MARC INDEX SY-TABIX.
ENDLOOP.
ENDFORM. " FILL_FIELDCAT_MARC
*& Form FILL_FIELDCAT_MAKT
 text
--> p1 text
<-- p2 text
FORM FILL_FIELDCAT_MAKT.
ENDFORM. " FILL_FIELDCAT_MAKT
*& Form CALL_ALV_INIT
 text
--> p1 text
<-- p2 text
FORM CALL_ALV_INIT.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
 EXPORTING
 I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
IT_EXCLUDING =
ENDFORM. " CALL_ALV_INIT
*& Form ADD_LISTS
 text
--> p1 text
<-- p2 text
FORM ADD_LISTS.
*ADD IT_MARA TABLE TO THE OUTPUT
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
 EXPORTING
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = IT_FIELDCATALOG_MARA
 I_TABNAME = 'IT_MARA'
 IT_EVENTS = IT_EVENTS
IT_SORT =
I_TEXT = ' '
 TABLES
 T_OUTTAB = IT_MARA
 EXCEPTIONS
 PROGRAM_ERROR = 1
 MAXIMUM_OF_APPENDS_REACHED = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
**ADD IT_MARC TABLE TO THE OUTPUT
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = IT_FIELDCATALOG_MARC
 I_TABNAME = 'IT_MARC'
 IT_EVENTS = IT_EVENTS
IT_SORT =
I_TEXT = ' '
TABLES
 T_OUTTAB = IT_MARC
EXCEPTIONS
PROGRAM_ERROR = 1
MAXIMUM_OF_APPENDS_REACHED = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ADD_LISTS
*& Form FILL_LAYOUT
 text
--> p1 text
<-- p2 text
FORM FILL_LAYOUT.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-TOTALS_TEXT = 'TOTAL'.
ENDFORM. " FILL_LAYOUT
*& Form DISPLAY_BLOCK_LIST
 text
--> p1 text
<-- p2 text
FORM DISPLAY_BLOCK_LIST.
WA_KEYINFO-HEADER01 = 'MATNR'.
WA_KEYINFO-ITEM01 = 'MATNR'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_BLOCK_LIST .
Thanks & regards
Sreenivasulu P

How i can display i_tab data in smartform as required

hi all
 i have tried a lot but not able to make logic for displaying data frm i_tab to SF as required ,
 my requirement is , i have data in i_tab as given below
field 1, 2,3,4, are TRNTYP CHAPID MATNR MAKTX OF J_1IEXCDTL respectivly.
GRPO 8707.00 0025F AC92 CON ROD FORGING.
ARE1 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
DLFC 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 now i want to display this data on SF like as :
discription of 8700.00
export against = ARE1
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD 
 Way to Display :-
 1. Chapter id in one single line
 2. then if TRNTYP is ARE1 or ARE3 it should display in second single
 line. <not any other TRNTYP>
 3. then field no. 3 & 4 of i_tab should come based on TRNTYP
 please guide me and help me , if possible help me with dummy code example
or if not then help me to make logic by give hint,
 i have all related data in one single i_tab
Message was edited by: SACHIN
 sachin sharma

Hi
see this and do accordingly
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
Reward if useful
Anji

How I can display images as table data?

Dear project Marvel,
I would like to display images as one of table data, but I do not know how to easily store image data into tables using htmldb and whether I can display the stored images. Does anyone knows how I can store/display images using htmldb? If I cannot do this easily then displaying image (which is stored somewhere else but) just looks like one of columns also fine to me.
Thanks in advance,
Rui

you can show those images inline in your report region if you call our "p" procedure in an image tag. so the example above has you creating a table that you then join to the wwv_flow_files view with a query like...
select htf.anchor('p?n='||f.id, f.filename) name,
f.doc_size, f.mime_type, m.upload
from my_docs m, wwv_flow_files f
where m.filename = f.name
...clicking on the links in the first column would return a page that just showed the associated image. if changed that anchor tag to an image one like so...
select '<img src="p?n=' || f.id ||'>' the_image,
f.doc_size, f.mime_type, m.upload
from my_docs m, wwv_flow_files f
where m.filename = f.name
...your images would then appear inline as opposed to on a separate page.
[Edited by: rmattama on Sep 25, 2003 1:22 PM]
i'm not sure how, but i'd earlier posted an incomplete answer to rui's question. i've fixed some of the above and added this below...
just fixed the html above so it renders correctly in this forum. sorry i didn't see that earlier. also, i'm not sure where the rest of my post went, but rui had also wanted to know what the wwv_flow_files was. that's a view to the table we use to store uploaded BLOBs like images, css's, and stylesheets. since you can only identify one document table in your DAD configuration, we give you this view to allow you access to that doc table that HTML DB owns.
fyi,
raj

How to merge alphabetically two lists through a rational solution?

Have two lists of captions it two languages and need to merge alphabetically, but this solution is very poor.
(list x)
Palacio Imperial, Barcelona, 2012
Cementerio, 2009
(list y)
Imperial Palace
Cemetery
to obtain:
Palacio Imperial, Barcelona, 2012
Imperial Palace
Cementerio, 2009
Cemetery
One method very naive:
· number the lists
· convert numbering to text
· in list y add a constant to sort in order:
1. Palacio Imperial, Barcelona, 2012
2. Cementerio, 2009
1a. Imperial Palace
2a. Cemetery
and sort:
1. Palacio Imperial, Barcelona, 2012
1a. Imperial Palace
2. Cementerio, 2009
2a. Cemetery
delete the code:
Palacio Imperial, Barcelona, 2012
Imperial Palace
Cementerio, 2009
Cemetery
(italics are not required)
Thanks.

Camilo,
Another more original way with QuicKeys! [I love this little soft for a long time!] Only 1 click!
For it, you need to use a different paragraph style for each list [eg. List1_Style and List2_Style].
Eg, our list:
A1
A2
A3
A4
B1
B2
B3
B4
Search: (?<=\r)(.+\r)+
Search format: List1_Style
Search-Research Windows must be open into ID.
Shorcut in QuicKeys:
1rst research
1/ Click on the button: Search (actived - in blue)
A2
A3
A4
is selected.
2/ Cut it (shortcut: Apple+X)
3/ Down arrow (of the keyboard)
4/ Copy it
We obtain:
A1
B1
A2
A3
A4
B2
B3
B4
2nd research
1/ Click on the button: Search (actived - in blue)
A3
A4
is selected.
2/ Cut it (shortcut: Apple+X)
3/ Down arrow (of the keyboard)
4/ Copy it
We obtain:
A1
B1
A2
B2
A3
A4
B3
B4
3rd research
1/ Click on the button: Search (actived - in blue)
A4
is selected.
2/ Cut it (shortcut: Apple+X)
3/ Down arrow (of the keyboard)
4/ Copy it
We obtain:
A1
B1
A2
B2
A3
B3
A4
B4
The research stops automatically.
The last work (after this test) is to create a loop in QuicKeys to run the steps 1/-2/-3/-4/ as many times as necessary until the end of the process.

How i can display Urdu word in JSP

I want to display unicode of URDU Language using jsp.
When i display urdu word then browser display ??? ????? letter.
Best Regards
Abdul Rehman

Is this related to this question?
LabVIEW Champion . Do more with less code and in less time .

How we can display two list if not using blocked alv ,not scr painter

Similar Messages

Maybe you are looking for