How we claculate the first and last date of the month
hi,
I have a requirement, if i have the any date of a month like today date 02/13/2008. So i want the first date of this month and the last date of this month.
Is there any FM for this..or if you have nay prorgam pls send to me.
thanks.
Hi Vipin,
Try
HR_JP_MONTH_BEGIN_END_DATE FM will return both first day and last day
LAST_DAY_OF_MONTHS for getting last day of month.
Reward if helpful.
Regards,
Mandeep
Similar Messages
-
How to get first and last date of previous month
To set default values in selection screen,I want first and last date of the previous month.
Also I want the first and last dates of previous quarter.
The quarters can be only january to march, apr to june, jul to sept, oct to dec.
I want to run a program on beginning of each month by job scheduling having <b>selection screens</b> for the above monthly and quarterly dates.Hi Suhas,
Use the below code.
DATA: v_date LIKE sy-datum.
DATA: v_month_begin_date TYPE sy-datum,
v_month_end_date TYPE sy-datum,
v_month(2) TYPE n,
v_month1(2) TYPE n,
v_quarter TYPE i,
v_year(4) TYPE n,
v_quarter_begda TYPE sy-datum,
v_quarter_endda TYPE sy-datum.
v_month = sy-datum+4(2).
IF v_month = '01'.
v_month = '12'.
v_year = sy-datum+0(4) - 1.
ELSE.
v_month = v_month - 1.
v_year = sy-datum+0(4).
ENDIF.
CONCATENATE v_year v_month '01' INTO v_date.
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
EXPORTING
iv_date = v_date
IMPORTING
ev_month_begin_date = v_month_begin_date
ev_month_end_date = v_month_end_date.
v_month1 = sy-datum+4(2).
IF v_month1 = '01' OR
v_month1 = '02' OR
v_month1 = '03'.
v_quarter = 1.
ELSEIF v_month1 = '04' OR
v_month1 = '05' OR
v_month1 = '06'.
v_quarter = 2.
ELSEIF v_month1 = '07' OR
v_month1 = '08' OR
v_month1 = '09'.
v_quarter = 3.
ELSEIF v_month1 = '10' OR
v_month1 = '11' OR
v_month1 = '12'.
v_quarter = 4.
ENDIF.
IF v_quarter = 1.
v_quarter = 4.
v_year = sy-datum+0(4) - 1.
ELSE.
v_quarter = v_quarter - 1.
v_year = sy-datum+0(4).
ENDIF.
CALL FUNCTION 'HR_99S_GET_DATES_QUARTER'
EXPORTING
im_quarter = v_quarter
im_year = v_year
IMPORTING
ex_begda = v_quarter_begda
ex_endda = v_quarter_endda.
WRITE:/5 'previous month begin date : ', v_month_begin_date.
WRITE:/5 'previous month end date : ', v_month_end_date.
WRITE:/5 'previous quarter begin date : ', v_quarter_begda.
WRITE:/5 'previous quarter end date : ', v_quarter_endda.
Message was edited by:
Velangini Showry Maria Kumar Bandanadham -
How to show the First and Last name of the user instead of user name
Gurus,
We have the full email id of the user as the portal user name. Right now we are using the "Item Attributes - Current User" to show the user name. We don't want to show this anymore. We would like to show the First and Last name of the user on the Portal page. How can i do this. Please post a reply if you have some idea about it.
Thanks
Raj
---------I believe this is possible using the security APIs. See http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/PLSQL/DOC/PLDOC_9026/INDEX.HTML and look for person_info (Returns user information, given a user name)
under wwsec_api
Suggest posting any follow-up questions to the Security forum - http://forums.oracle.com/forums/forum.jsp?forum=6 -
Getting first and last dates of a month
Jello all,
I am really sorry I am posting this topic here, not actually owned by this forum but in fundamental forum i am not getting it attended.
I am generating monthly, quartelry and yearly reports, for which I need to get first and last dates of a given Month taking in to account leap year. I searched the API and docs for Calendar class. I could not find any useful methods / fields. I wonder this being a very common requirement, how SUN has not provided these essential features. I still feel, it must be some where. Please help me and reply. Also if you came across any other forum for util package, let me know.
Thanks
VardeJello all,
I am really sorry I am posting this topic here, not
actually owned by this forum but in fundamental forum
i am not getting it attended.
Yes, and I can see you are a very patient person, waiting a whole half hour for a response before cross posting other boards.
Question answered.
http://forum.java.sun.com/thread.jsp?thread=514908&forum=31&message=2451646 -
First and Last date of any Month.
Hi Friends,
I have 2 fields in my table
FROM DATE & TO DATE
User can enter any date in these two fields, but at time of commit i want to change the FROM DATE to the first date of the Month user have entered. And for TO DATE i want to change the last date of the month.
For Example :
User Enters-
FROM DATE 12-Mar-2003
TO DATE 27-Jun-2003
I want to change these date to:
FROM DATE 01-Mar-2003
TO DATE 30-Jun-2003
How can I write a database function or procedure to control this thing.
Please help.
Best regards,
Imran BaigIt depends on your requirements, but I usually use TRUNC(date, 'D')
to get the first day(Sunday) of the week, because TRUNC(date, 'W')
returns the same day of the week as the first day of the month.
See http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a85397/function.htm#80101
for more info on this. -
To display first and last dates of a month
I have the date format in 10 Mar 10.
My requirement is when ever I select the any date in the dashboard for whole month it should display whole month results.
I got query in obiee101.blogspot.com.but if I use that sometimes it is not returning the last day results. Any body please give me the query to display results for first day and lastday?
Ex:if I select any day in the drop down of the prompt it should display whole month results
If I select either 1 mar 10,2 mar 10,30 mar 10.....
It should give the results for whole month of march.
Can you please provide me the query for last month also?
If I select march date in date print want to display whole march results in one column,previous month results in other column
Anybody help me to get this done?Yes, you are correct. In John's SQL for last day of the month, if the "last day of the previous month" ends on the 30th, than "adding one month" will result in the 30th of the following month. But if the following month has 31 days, you miss that day.
Use this for the last day of the current month.
TIMESTAMPADD(SQL_TSI_DAY, -1,TIMESTAMPADD(SQL_TSI_MONTH,1,TIMESTAMPADD(SQL_TSI_DAY,1,TIMESTAMPADD(SQL_TSI_DAY, DAYOFMONTH(CURRENT_DATE)*-1, CURRENT_DATE))))
The above SQL will ensure that you will always get the last day of the "current month" regardless of how many days are in the previous or current month. -
How to find first and last date of a fiscal week using SQL
Hello,
I want information about FISCAL Week, means a Week based on ISO standard. I know format strings ‘IW’ or ‘IYYY’ gives fiscal week and fiscal year respectively from a given date. But I want to find the first and last date of a fiscal week. Say suppose I have a fiscal week is 2, and fiscal year is 2008, how to find the start and end date of the given fiscal week.
Any kind of help would be greatly appreciable.
Thanks,
Princedavide gislon wrote:
The following query evaluate the begin of a fisical week, where &year and &week are respectively the year and week you want to calculate.
To evaluate the end of the week you have to add 6.
Note that my database is set to have monday as day number 1 of the week, and sunday as day number 7; if your database settings are different you should modify the query accordingly.
SELECT CASE TO_CHAR(TO_DATE('&year','YYYY'),'D')
WHEN '1' THEN TO_DATE('&year','YYYY')+((&week-1)*7)
WHEN '2' THEN TO_DATE('&year','YYYY')+((&week-1)*7-1)
WHEN '3' THEN TO_DATE('&year','YYYY')+((&week-1)*7-2)
WHEN '4' THEN TO_DATE('&year','YYYY')+((&week-1)*7-3)
WHEN '5' THEN TO_DATE('&year','YYYY')+((&week-1)*7+3)
WHEN '6' THEN TO_DATE('&year','YYYY')+((&week-1)*7+2)
WHEN '7' THEN TO_DATE('&year','YYYY')+((&week-1)*7+1)
END BEGIN_FISICAL_WEEK
FROM DUAL
Hope this is helpful.
Cheers,
Davide
Edited by: davide gislon on 08-Jan-2009 07:19Your query does nothing you say it does. TO_DATE('&year','YYYY') returns first day of the current month for year &year. And the only reason it returns January 1, &year is that we are currently in January:
SQL> select TO_DATE('&year','YYYY') from dual
2 /
Enter value for year: 2005
old 1: select TO_DATE('&year','YYYY') from dual
new 1: select TO_DATE('2005','YYYY') from dual
TO_DATE('
01-JAN-05
SQL> As soon as we roll into February:
SQL> alter system set fixed_date = '2009-2-1' scope=memory
2 /
System altered.
SQL> select sysdate from dual
2 /
SYSDATE
01-FEB-09
SQL> select TO_DATE('&year','YYYY') from dual
2 /
Enter value for year: 2005
old 1: select TO_DATE('&year','YYYY') from dual
new 1: select TO_DATE('2005','YYYY') from dual
TO_DATE('
01-FEB-05
SQL> alter system set fixed_date = NONE scope=both
2 /
System altered.
SQL> select sysdate from dual
2 /
SYSDATE
08-JAN-09
SQL> But even if TO_DATE('&year','YYYY') would always return January 1, &year, or you would fix it to TO_DATE('0101&year','MMDDYYYY') it still would be wrong. ISO week rules are
If January 1 falls on a Friday, Saturday, or Sunday, then the week including January 1 is the last week of the previous year, because most of the days in the week belong to the previous year.
If January 1 falls on a Monday, Tuesday, Wednesday, or Thursday, then the week is the first week of the new year, because most of the days in the week belong to the new year.Therefore, next year:
SQL> DEFINE YEAR=2010
SQL> DEFINE WEEK=1
SQL> ALTER SESSION SET NLS_TERRITORY=GERMANY -- enforce Monday as first day of the week
2 /
Session altered.
SQL> SET VERIFY OFF
SQL> SELECT CASE TO_CHAR(TO_DATE('0101&&year','MMDDYYYY'),'D')
2 WHEN '1' THEN TO_DATE('0101&&year','MMDDYYYY')+((&&week-1)*7)
3 WHEN '2' THEN TO_DATE('0101&&year','MMDDYYYY')+((&&week-1)*7-1)
4 WHEN '3' THEN TO_DATE('0101&&year','MMDDYYYY')+((&&week-1)*7-2)
5 WHEN '4' THEN TO_DATE('0101&&year','MMDDYYYY')+((&&week-1)*7-3)
6 WHEN '5' THEN TO_DATE('0101&&year','MMDDYYYY')+((&&week-1)*7+3)
7 WHEN '6' THEN TO_DATE('0101&&year','MMDDYYYY')+((&&week-1)*7+2)
8 WHEN '7' THEN TO_DATE('0101&&year','MMDDYYYY')+((&&week-1)*7+1)
9 END BEGIN_FISICAL_WEEK
10 FROM DUAL
11 /
BEGIN_FI
04.01.10
SQL> SELECT TRUNC(TO_DATE('0101&&year','MMDDYYYY'),'IW') FROM DUAL
2 /
TRUNC(TO
28.12.09
SQL> 2 user10772980:
Use:
SELECT TRUNC(TO_DATE('0101&&year','MMDDYYYY'),'IW') + (&&week-1)*7 FISCAL_YEAR_&&YEAR._WEEK_&&WEEK
FROM DUAL
FISCAL_YEAR_2010_WEEK_1
28.12.09
SQL> SY. -
First and Last Date. Is is possible in Essbase?
Hello All,<BR><BR>Here are the dimensions in my outline:<BR>- User<BR>- Application<BR>- Dates<BR>- Measures (Count, FirstLoginDate, LastLoginDate)<BR><BR>I am trying to create a report in Essbase that shows the first and last date that each user accessed each Essbase application. I created an ETL process that builds a relational table with one record for each unique combination of User/Application/Day where a user was logged into an application. This process gets its source data from the Essbase application log files. I am loading a count of 1 to each intersection of User/Application/Day. I also want to add the first and last day to the cube but can not figure out how.<BR><BR>1) Is there an easier way to get at the source data then the application log files?<BR>2) If the application log files are the way to go, how do I indicate in the cube what the first and last login days are for each combination of User/Application?<BR><BR>I was thinking of loading the serial dates to the FirstLoginDate and LastLoginDate measures. The trouble I am having is where to load the dates data. Do I load it to level 0 (individual dates) and then use time balance to get the dates up to the higher levels (month, year) or load it at the higher levels? If I should load it at the higher levels, do I assume correctly I will need to create another relational table with one record for each User/Application/Month and User/Application/Year that shows the first and last dates? Any other ideas?<BR><BR>Thank you in advance,<BR><BR>Bill Handelman<BR>847-989-1758<BR>[email protected]<BR><BR>
While you may have natural ordering in your date dimensions, Essbase doesn't handle first and last dates well. The one area where ther is at least some funcionality in date manipulation is inattribute dimensions, however, the easy use there allows only one date attribute using normal date processing. It gets a great deal more complex using two dates.<BR><BR>Look up the DBAG references to the date type of attribute dimensions, you might find it a partial solution to your problem.<BR><BR>If you go the serial date method, load at level 0 and want to use time balance to bring the values up, you still need a time dimension. If I were designing something, I might use the first access date as a time dimension and the last access date in an attribute dimension, but I'm rambling rather than analyzing.<BR><BR>In any case, look at the date type attribute dimension as one possible option for your cube.
-
SQL Selecting the first and last entries for each day
Hello SQL experts,
I hope you can help with this.. I have a table (could have 1M or more rows in it) see structure below. I am looking to get the first and last date/times for each employee for each day. I also need the location GUID for the first read.
EmployeeGUID (uniqueidentifier datatype)
LocationGUID (uniqueidentifier datatype)
DateTime (DateTime datatype)
12345678-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/12/2014 07:00:01
12345678-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/12/2014 10:40:05
12345678-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/12/2014 17:04:02
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 08:00:00
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 14:00:03
44422222-0000-0000-0000-000000000000
33333333-0000-0000-0000-000000000000
04/15/2014 07:49:00
44422222-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/15/2014 09:00:01
This would be the ideal output (I can do without the TotalTimeInHours):
EmployeeGUID (uniqueidentifier datatype)
LocationGUID (uniqueidentifier datatype)
FirstRead (DateTime datatype)
LastRead (DateTime datatype)
TotalTimeInHours
12345678-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/12/2014 07:00:01
04/12/2014 17:04:02
Total in hours between the first and last read.
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 08:00:00
04/14/2014 14:00:03
44422222-0000-0000-0000-000000000000
33333333-0000-0000-0000-000000000000
04/15/2014 07:49:00
04/15/2014 09:00:01
I would post what I have tried so far but I have been trying many different types of queries over the last few days. In short I need the employees first and last reads for each date. They could have many entries per date or just 1. I am certain that this
is a trivial thing for a SQL expert but not trivial for me :).
Thank you in advance!Thank you!
This is almost what I need. The LocationGUID has to be included in the output. When I include it, I have to put it in the Group By clause. When I do that the reads are based on the LocationGUID (see below).
** I added a few more data entries and included the LocationGUID in the output.
***** SQL ***********
CREATE TABLE test( EmployeeGUID uniqueidentifier, LocationGUID uniqueidentifier, DateTimeCol DateTime )Insert into test values
('12345678-0000-0000-0000-000000000000','11111111-0000-0000-0000-000000000000','04/12/2014 07:00:01')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 10:40:05')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 17:04:02')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 19:00:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/14/2014 08:00:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/14/2014 14:04:03')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/15/2014 07:49:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/15/2014 09:00:01')
,('12345678-0000-0000-0000-000000000000','11111111-0000-0000-0000-000000000000','04/13/2014 10:40:05')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/13/2014 17:04:02')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/13/2014 19:00:00')
;with mycte as (
SELECT *, row_number() OVER(partition by EmployeeGUID, Cast(DateTimeCol as date) Order by DateTimeCol) rnASC,
row_number() OVER (partition by EmployeeGUID, Cast(DateTimeCol as date) Order by DateTimeCol DESC) rnDESC
FROM test)
Select EmployeeGUID ,Cast(DateTimeCol as date) dt,LocationGUID,
Max(Case when rnASC=1 Then DateTimeCol End) minDateTimeCol
,Max(Case when rnDESC=1 Then DateTimeCol End ) maxDateTimeCol
,Datediff(minute, Max(Case when rnASC=1 Then DateTimeCol End) ,Max(Case when rnDESC=1 Then DateTimeCol End ) )/60.0 TotalTimeInHours
from mycte
Group by EmployeeGUID, LocationGUID,Cast(DateTimeCol as date)
Order by dt,EmployeeGUID
drop TABLE test
**** OUTPUT **********
EmployeeGUID
dt
LocationGUID
minDateTimeCol
maxDateTimeCol
TotalTimeInHours
12345678-0000-0000-0000-000000000000
2014-04-12
11111111-0000-0000-0000-000000000000
2014-04-12 07:00:01.000
NULL
NULL
12345678-0000-0000-0000-000000000000
2014-04-12
22222222-0000-0000-0000-000000000000
NULL
2014-04-12 19:00:00.000
NULL
12345678-0000-0000-0000-000000000000
2014-04-13
11111111-0000-0000-0000-000000000000
2014-04-13 10:40:05.000
NULL
NULL
12345678-0000-0000-0000-000000000000
2014-04-13
22222222-0000-0000-0000-000000000000
NULL
2014-04-13 19:00:00.000
NULL
44422222-0000-0000-0000-000000000000
2014-04-14
22222222-0000-0000-0000-000000000000
2014-04-14 08:00:00.000
2014-04-14 14:04:03.000
6.066666 -
How do I easily select a group of emails in Apple Mail if I want to delete them? In other words, what do I select if I mark the first and last email to delete everything in between? Thanks.
I have this same issue. I have over 100 email addresses that I need to add to a group. The issue is not making the group, it's getting the email addresses from Mail to Contacts.
Dragging the email addresses does nothing. You can copy the addresses, but there's nowhere to put them. You can make a VCF for an email address, but then you have to find all of them to add them to the group. How do you automate this?!
I'm astounded that there's so little support for such a common issue for which people have been asking for years. -
How to get the first and last record
Hai All
I have table called T1 and there are more than 8 lakhs records and i have a column called Timestamp so i need to get the first record value and time stampvalue and last record and time stamp value so that i can conclude that For Example
form 13 june to 15 june data are here
Kind Regards
SrikkanthMSomething like this can also indicate the first and last rows as you query...
SQL> select empno, ename, hiredate
2 ,case row_number() over (order by hiredate)
3 when 1 then 'First Row'
4 when count(*) over () then 'Last Row'
5 end as flag
6 from emp;
EMPNO ENAME HIREDATE FLAG
7369 SMITH 17/12/1980 00:00:00 First Row
7499 ALLEN 20/02/1981 00:00:00
7521 WARD 22/02/1981 00:00:00
7566 JONES 02/04/1981 00:00:00
7698 BLAKE 01/05/1981 00:00:00
7782 CLARK 09/06/1981 00:00:00
7844 TURNER 08/09/1981 00:00:00
7654 MARTIN 28/09/1981 00:00:00
7839 KING 17/11/1981 00:00:00
7900 JAMES 03/12/1981 00:00:00
7902 FORD 03/12/1981 00:00:00
7934 MILLER 23/01/1982 00:00:00
7788 SCOTT 19/04/1987 00:00:00
7876 ADAMS 23/05/1987 00:00:00 Last Row
14 rows selected.
SQL> -
How can I display the first and last name using a paramater as employee ID?
Hi SAP,
I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
if table.employeeid = {? Employee ID} then
table.firstname" "table.lastname
It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
Anyone have any ideas?
ZHi Try this,
Whileprintingrecords;
if ={?EmpID} then
Also check the option "Default values for null" in the formula editor.
Regards,
Vinay -
I need to build a linear list of the string positions of the
first and last character of each word in a string. For example if I
have the string myPet = “DOG CAT FISH” then myList =
[[1,3],[5,7],[9,12]]
myPet.word[x] will let me access the individual words but
I’m not sure how to get the char position of the beginning
and end of each. Please help, it’s Friday and my brain has
left for the weekend.Touche, Sean.
"Sean Wilson" <[email protected]> wrote in
message
news:fqa8ap$bga$[email protected]..
> Hi Craig,
>
> Your's fails if any word is repeated. Try it with "DOG
CAT FISH DOG"
>
> This one seems to work, although there are probably more
efficient ways to
> go about it. A regular expression and the PRegEx xtra
would certainly be
> quicker, especially as the string gets longer
>
> on mGetWordBoundaries aString
> -- basic error check
> if stringP(aString) = 0 then return []
> if length(aString) = 0 then return []
>
> lWhitespace = [SPACE, TAB, RETURN, numToChar(10)]
> tStart = 1
> tChar = aString.char[tStart]
> repeat while lWhitespace.getPos(tChar)
> tStart = tStart + 1
> tChar = aString.char[tStart]
> end repeat
>
> lPositions = []
> repeat with w = 1 to aString.word.count
> tEnd = tStart + aString.word[w].char.count - 1
> lPositions.append([tStart, tEnd])
> tStart = tEnd + 1
> tChar = aString.char[tStart]
> repeat while lWhitespace.getPos(tChar)
> tStart = tStart + 1
> tChar = aString.char[tStart]
> end repeat
> end repeat
> return lPositions
> end -
I've bought the season 1 of "The Wire" (7episodes), when I synchronize with my PC, it only charge the first and last episodes and not the 5 episodes in between ??
Hello spinozette,
I am sure you are eager to download and watch Season 1 of The Wire. I found a couple of resources that might help with downloading this purchase.
First, I recommend checking to see if the download was interrupted. You can use the steps in this article:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If the episodes do not download after following the steps in that article, I recommend trying to download the episodes from the list of past purchases. You can find the steps to do this in the section titled "Apps, Books, Music, Movies, or TV shows on a computer" in the following article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
If you are still not able to download the rest of the season, I recommend reporting this issue to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Get first and last date of month
Hi,
Is there any function module to get first and last date of month for a entered date.
Please let me know.
Regards,
SPHi,
Use the below FM to find the Last day of month and them u can easily calculate the first day.
DATA : v_startdate TYPE sy-datum.
DATA : v_enddate TYPE sy-datum.
DATA : v_temp TYPE dats.
v_temp = sy-datum.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
day_in = v_temp
IMPORTING
last_day_of_month = v_enddate
CONCATENATE v_enddate+0(6) '01' INTO v_startdate.
Hope it helps.
Regards,
Arnab.
Maybe you are looking for
-
I can not refresh my music library after update
dears i have just update my phone ie:n73 with firmware v4.0726.2.0.1 and my memory card has 2GB capacity. but when i run music player i can not refresh my music library. i should remind you that all my songs are in my memory card. your quick quide is
-
I've been having several problems with Firefox, to the point that I almost can't use it anymore. In no particular order, they include: 1. When I download something, 'Downloads' opens. When a d/l finishes I used to be able to run an install or open an
-
Error when doing a search in the Account Dim
I get this error sometimes: "The member exists in NEXT...Do you want to expand?" It only happens in the Account dimension and when the view is ID and Description. Any Ideas? Thx.
-
Edit to tape in Final Cut Studio 2 question
This entire week we've been dividing time and shoots using one camera, a Panasonic DVX100A. As a result I think the settings on our camera and computer have changed a bit between shoots. That being said I'm having a problem doing an 'Edit to Tape' fr
-
IPod Touch 1g "unable to connect to wifi"
Hi . I recently got an iPod touch 1g from my sister's friend , and everything on it works fine, except the wifi. Everytime I try to go on wifi I'll click "other >" and type in my Router name and password , and it says it ither cannot connect or its u