How we know The usage of Internet in MBP.

G'day,
I used the Software ,in Which i know how much usage of my internet uploading And Downloading.
Is there anyone know Any Software.
I used the Software in my MBP but i lost it. Any one can help me.
Thanks
Ammar
<Edited by Host>

Try SurplusMeter:
http://www.skoobysoft.com/utilities/utilities.html#surplusmeter

Similar Messages

How to know the balance and validity of internet data in iPad

How to know the balance and validity of internet data in iPad?

Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance.

[ASK] How to know the number of usage of each Atomic Service ??

I correct my question:
*How to know the number of usage of each Atomic Service by the Domain & Enterprise Services?*
I want to see the number of usage of each atomic service(AS) by other services (DS & ES)
ex:
es_A -----> ds_B   (1x)    ----->    as_B    (2x) --> so as_B is accessed by es_A twice (2x)
es_A -----> ds_C   (2x)    ----->    as_C    (2x) --> so as_C is accessed by es_A 4times (4x)
es_A -----> ds_B   (2x)    ----->    as_D    (3x) --> so as_D is accessed by es_A 6times (6x)
es_B -----> ds_B   (1x)   ----->    as_E    (1x) --> so as_E is accessed by es_B once (1x)
es_B -----> ds_C   (3x)    ----->    as_F    (2x) --> so as_F is accessed by es_B 6times (6x)
es_B -----> ds_B   (4x)    ----->    as_G    (1x) --> so as_G is accessed by es_B 4times (4x)
etc..
Is there any tool in OSB, WLS, BPEL Console or Java Developer to support it?
Thank you...

user13294928 wrote:
Ganesh wrote:
Their are two ways to do this
1. In the sbconsole, when you click on the proxy or any resource name, you will see information about number of references and referenced by as two parameters. Click on the number you will drill down into exact schemas, business service, split joins, etc it refers and who all refers this resource.--> Where can I see the information?
2. In the OEPE, eclipse you can see the same in the "Reference" view of the OSB perspective.--> I'm using Java Developer right now, does it work?Thank you1. You can see the reference in: sbconsole -> Resource View -> Click on Proxy or any resource name -> it will show Ref: <n> some number and -> Click on the number. Do you see this?
2. JDeveloper should also have a resource view, but have not tried it though

How can we know the usage log information in BW?

Hi,
How can we know the usage log for Infocubes & ODS in BW ?
What transactions/tables can we use?
Plz help.

Hi,
you have to activate the BW Statistics
Use the BW Statistics tables
RSDDSTAT
RSDDSTATAGGR
RSDDSTATAGGRDEF
RSDDSTATBCACT
RSDDSTATCOND
RSDDSTATDELE
RSDDSTATEXTRACT
RSDDSTATLOG
RSDDSTATWHM
Happy Tony

How to know the list of reports that are in usage

Hello,
How to know the list of reports that are in use from the last 3 months by the users on Bw server.How basis team will help me in this regard?
Regards,
Anand.

Hi,
Pl look at following tables if you need any further detailed information
Table Name Use of the table
RSZELTDIR
Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references .
To get a list of query elements built on that cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSRREPDIR
Directory of all reports (Query GENUNIID) .
To get all queries of a cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSZCOMPDIR Directory of reporting components.
To get query change status (version, last changed by, owner) of a cube.
RSZRANGE Selection specification for an element
RSZSELECT
Selection properties of an element
RSZCOMPIC
Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV
Global Variables in Reporting
RSZCHANGES Change history of reporting components
Thanks and regards

How to get the usage of SSRS reports in project server 2010

Hi
Can any body tell me how to get the usage of the SSRS reports in Project Server 2010.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hello,
See the links below on how to get the usage for SSRS reports:
http://sqlbadboy.wordpress.com/2013/09/12/reporting-services-reports-whos-using-them/
http://www.mssqltips.com/sqlservertip/1908/analyze-report-execution-and-usage-statistics-in-sql-server-reporting-services/
http://www.mssqltips.com/sqlservertip/1306/how-to-know-what-reporting-services-reports-are-being-used/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

With a contract number, how to know the total PO release value against it?

Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract. In other word, we would like to know the total release value of all the POs with the same contract number. To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
We will give you reward points!
Thanks!

hi Mohammad,
By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess. Could you let us know which one is the PO release value for this contract?
Contract   Type Vendor     Name                                 PGp Agmt. date
Item Material           Short text                               Mat. group
D I A Plnt SLoc                 Targ.qty. Un       Net price Curr.   per Un
4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
Agreement start06/20/2006 Agreement end 12/31/2007
Tgt. val.        1,000,000.00 USD   Open          1,000,000.00 USD   100.00 %
00001                    Inspection Svcs, Construction            R3VNI
L   U                                  0 UL            0.00 USD       1 EA
00002                    Chief Inspector                          R3VNI
L   U                                  0 DAY         390.00 USD       1 DAY

How to create the user on Internet Application Server(IAS) control console

Hi All,
My Client is asking me for How to create the user on Internet Application Server(IAS) control console 10.1.2( 10g release 2).
If anyone have the document for How to Create the User on Internet Application Server (IAS) console 10g release 2 , then please send me the document and help me out from this Concern.
Regards,
Yadav@intelli.
Edited by: 851080 on Apr 8, 2011 6:31 PM

Are you using OID? Can you provide more details about your iAS environment?

How to know the class method behind an enterprise service

Hi,
SAP has provided enterprise services for Room booking in Real Estate module. They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
Now my question is: I know the enterprise services used in this application. How to know the implementing methods behind these enterprise services ?
If possible suggest which approach will be a better option for the inhouse development.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
Please suggest the best alternative.
Best Regards,
Aleem Mohiuddin.

Hi
They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
I assume you are talking about xApps.
How to know the implementing methods behind these enterprise services ?
In sproxy transaction you can search service and then you can see class and method implemented behind that particular service.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
In my opinion not recommended to bypass ES and use method behind it.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
Not sure why you want to create proxy of ES.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
You can use either Webdynpro (ABAP or Java) or VC to model your application which consume ES in backend. Both options are good, you can chose Java or ABAP flavor of dynpro based on skill available in team. VC is very effective in rapid modelling and can be used in protyping or in development of complete application.
Regards,
Gourav

How to know the error in the goods movement

Hai gurus,
a) while doing goods issue and goods receipt , if there is any
error in the goods movement how to know the same and correct it.
Regards,
sekar chand

Hi,
If You are doing GR and GI during order confirmation then you will find a tab for Display Error(Bell Ikon).At the time of any error you will find this icon highlighted.press it you will find details error description and proposed solution.
Regards,
Dhaval

How to know the PO Created with RFQ or Not..??

Hi MM Gurus,
How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy

Hi Pradeep. Thanks for the mail.
the problem is ....with *quotation...*
How to know the purchase order created with one quotation or not.
because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation.
I created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying.
so how to knows once PO cretd with Quotation or not. .
and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy

How to know the count of record in CR XI?

Post Author: Liu ming
CA Forum: Deployment
Hi All,
I create a report by CR XI release 2. The report is viewed in ASP.Net. So, I would like show a message when the report have no record. My question is how to know the count of record?
Thanks.

I was able to do this by using
ora:countNodes('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500')

HT204088 How to know the rest of money in a credit card and the total of purchase amount?

How to know the rest of money in a credit card and the total of purchase amount?

What do you mean 'the rest of money in a credit card' ? All you can see on your purchase history is what you've bought, you can't see how things were billed nor the total amount that you've spent in the store - you will need to sum your purchases yourself to see the total.

How to know the timings of the run time of thr report

Hi,
Can you please tell me how to know the run time of the query , i mean how much time it took for the query to dispaly the results .
Also we have these queries in the workbook. How to refresh the work book . is it enough if i refresh the query.
Thanks
Sruthi

Hi
How can we check in RSRT tcode?
And how can we do i RSRTRACE?
Can I know the procedure.

How we know The usage of Internet in MBP.

Similar Messages

Maybe you are looking for