How webcenter maintain the session .

Hi All,
Can anybody explain me how webcenter maintain its session .
As of my understanding if we perform any action on webcenter component it goes through some service call .
Once this service call is madle idle icon keep moving that says your session is refreshed now .
Please can u let me know which function and how it is called to idle timer to refresh (revolve).
Its very important for me since i want to call this function from my template to refresh the session since i am not using standard portlet connection through wsrp .
With Regards ,
Arun.

Well, you're not wrong, but things could be clarified...
Check out + session invalidation... I presume you mean you explicitly invalidate it, yes? The session will timeout eventually anyway (unless you make it have no timeout).
Anyway, to you actual question. The container manages them, to an extent. It handles sessions automatically for you thru session cookies with the session ID. But if the user has cookies disabled, then that'll muck things up. Generally, it's good practice to always use URL rewriting on your links to make sure that's not a problem.

Similar Messages

Problem while maintaining the Session

Hi friends,
I'm building chatServer in j2me using Servlet/Jsp.So while doing so i want to maintain a session.
For that i've invoke the following method,
HttpSession session = request.getSession(true);(in server)
But from that same MIDlet when i again send some text it again create new session id.
How could i resolve this issue as i just want to use same MIDlet when sending data to server?
Do i use diffrent Servlet/Jsp( at server side) when i going to send data after my session maintain?
But how could this new Servlet/Jsp( at server side) page get the same session id ?
Is there any other to resolve this ( want use only Session Tracking API)?
Regards,
Sachin Warang.

You need to do your session stuff in your midlet to make it work with sessions. Check how servlets do the session stuff, and let your midlet work with it.

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to maintained the Text language for CKF keyfigure

Dear All,
Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
Issue in text CKF's:
There is a main CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
We can see only the text in english for total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
It would help to me if any one can answer my question.
Thanks in advance .
Regards,
MQ

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to Maintain the Pricing Condition Records in CRM

Hi
I am new to the CRM
How to maintain the pricing condition records in crm for the particular condition type?
as we do in SD(VK11)
Thanks

Hi Binu,
First of all, you could maintain pricing conditions in the following places:
1. In General Condition Maintenance (GCM)
2. At the product maintenance level
3. At the 'Price agreement' tab of Contracts
4. As manual conditions during order processing at item level
Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps.

How to get the session variable value in JSF

Hi
This is Subbus, I'm new for JSF framewrok, i was set the session scope for my LoginBean in faces-config.xml file..
<managed-bean-name>login</managed-bean-name>
<managed-bean-class>LoginBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope> like that...
So all parameter in LoginBean are set in session right ?... for example i used userId is the Parameter...
Now i need to get the the userId parameter from that session in my another JSP page.. how i get that ?..
Already i tried
session.getAtrribute("userId");
session.getValue("userId");
but it retrieve only "null" value.. could u please help me.. it's very urgent one..
By
Subbus

Where i use that..is it in jsp or backend bean...
simply i use the following code in one backend bean and try to get the value from there bean in the front of jsp page...
in LogoutBean inside
public String getUserID()
     Object sessionAttribute = null;
     FacesContext facescontext=FacesContext.getCurrentInstance();
     ExternalContext externalcontext=facescontext.getExternalContext();
     Map sessionMap=externalcontext.getSessionMap();
     if(sessionMap != null)
     sessionAttribute = sessionMap.get("userId");
     System.out.println("Session value is...."+(String)sessionAttribute);
     return (String)sessionAttribute;
     return "fail";
JSP Page
<jsp:useBean id="logs" scope="session" class="logs.LogoutBean" />
System.out.println("SS value is ...."+logs.getUserID());
but again it retrieve only null value.. could u please tell me first how to set the session variable in JSF.. i did faces-config only.. is it correct or not..
By
Subbus

Validation: How to maintain the entry in GB02C

HI FI GURUS n EXPERTS,
My requirement is that - We want to restrict Negative posting for some GL i.e. For some GL balance should not be Zero.
When I have made the search on SDN, I found it can be done with the help of Validation: OB28 & GGB0.
Currently we are not using any validation. When we use T-Code GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message ID.
I also found that this information is maintained in Table GB02C.
When I use Se16 to see the detail of the table GB02C, I found there is only one entry Bool. Class: FP1 & Message ID 7F.
But I don't know How to maintain the entry in table GB02C & What is the T-Code for it. which message ID I have to create.
Please help.
DSC

Dear Alex,
When I use: GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message Class, I select the Message Class 9 and for Message Class Press F4 and select any message class. System gives an error message: Message ID must start with 'Z' Message no. GB116.
Basically, My question is that: Which T-Code we have to use to maintain Boolean Class & Message Class.
With thanks,
DSC

How to maintain the vendor details in sap pi ?

HI All,
Here i am working with B2B scenario , can you help me how to maintain the vendor details and client details in parties,'
here i have 49 vendors.
control records are changing according to the vendor s .
Plz help me ......

Can u help me how to maintain the link between the pi and ecc for identifiers
Would like to know what your scenario is. Identifier would be required to be maintained in the Party (created in SAP PI) when the scenario is Inbound.
It is actually the Partner Number for the Partner Profile created in we20 of the sAP ECC system. (you may have to store it as KU or LI) in SAP system.
Regards,
Abhishek.

How to maintain the contact person in Business Partner ?

Hi Experts,
Could you help to resolving the below Requirement.
__ +Requirement:+__
How to maintain the contact person in Business Partner ?
How to get the Contact person in Is-Media Documents?
Thanks& Regards
Venkat

Dear Venkat,
In SD Customer Master data, we can maintain Contact Person in General Data tab page.
For my knowledge, we can not find u201CContact Personu201D field in ISM Business Partner u2013 General Data. Correct me if I am wrong.
Mostly user enters the contact person details in u201CSearch Term 1/ 2 fieldu201D in Address tab page in ISM Business Partner u2013 General Data tab page. While creating ISM Billing Document for this Business Partner, system prints this contact person details in ISM Invoices.
(Or)
While creating ISM Order, user can maintain Contact Person name in Header Details(Click on u201CGo to >Header>Details>Purchase Order Data>Cont.Person)
If you maintain Contact Person name in Header Details also, system print this contact person details in ISM Invoices.
Check from your end.
Best Regards,
Chandramohan

How to maintain the contact list in the phonebook when i change my sim card

how to maintain the contact list in the phonebook when i change my sim card

The SIM has not affect on the contacts in an iPhone. Unlike other devices, the contacts are not maintained on the SIM card.

How to maintain the data in the view cluster

we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.

Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
<b>Rewards point if useful.......</b>
regards....
Abhaysingh.

How to maintain the integrity of datbase??

Hi,
I wanted to know that waht are the things which must always be considerd when you maintain the integrity of database and also how to maintain the security that balance the user requirement? I am asking in general point of view.
hope for your precious advise.

Data integrity is normally ensured by ensuring that the schema design is properly normalized (i.e. there is 1 and only 1 place where a particular piece of information belongs) and by creating referential integrity constraints. It is also a good idea to create packages that operate on the tables and expose only these packaged procedures to app developers. When there are bugs, it is a lot easier to fix a single stored procedure than to modify every application out there. Stored procedure interfaces also simplify life for developers because they don't have to be concerned about remembering to insert all the appropriate relationships, just passing in the right parameters to the function.
Your question on security, unfortunately, is incredibly broad. Generally, practice the principle of least privilege-- give users the absolute minimum of privileges they could need to do their job. Precisely what sort of security policies you need really depends on the application and the organization. Large US companies have things like Sarbanes-Oxley to worry about which drives a lot of requirements, systems with sensitive data (i.e. payroll) probably need more security than something like the product database.
Justin

How to maintain the characterstics of the values tab of limits maintain.

Hi SAP ALL,
Hi how to maintain the characterstics point of valu scales maintain activally i want the P R release authorsiation limit increase.
Thnaks

The Class Type of PR & PO Release is 032 and for Class Go to SPRO-MM-Purchasing-Purchase Order-Release Procedure-Release Strategies and Here you will find the Class.
Else Go to Release Strategies-classification using the same above path and Change the Chareceteristic Values and Save.
Regards,
Ashok

How to maintain the status of the Thread ?

How to maintain the status of the Thread ?
namanc

I want to know whether a particular thread (java
application) is completed successfully or not ...
If the thread is not completed successfully then I
want to restart the Thread.
Actually this is the Task Scheduler Application ...
If the particular task is not running successfully
then I want to start the Task again ...
namancThen it could look something like this: // loading the queue
for each task
    add task to list of incomplete tasks
    enqueue task in work queue
// dispatcher
while !done()
    task = workQueue.dequeue();
    New Thread(task).start();When a task finishes, it can call a callback method on the dispatcher. The dispatcher looks at the task's status. If it finished successfully, the task gets removed from the list of incomplete tasks. Else it goes back on the work queue.
There will be some syncing issues involved. You'll have to use wait() and notify()/notifyAll() to handle the situation where the work queue is empty, and all incomplete tasks are being worked on. And the case where the dispatcher wakes up after the notifyAll() and there's nothing to dequeue and nothing in the list of incomplete tasks.
Clearly it needs some fine tuning, but I hope you get the idea.

How to get the session name of a batch input

hi everybody
does anybody know how to get the session name of a batch input?
I have to put the name of the session at the end of my program so that the user can click on the session name to go directly to SM35 to run the batch input when the program ends

Hi sia,
1. Table is APQI
2. field name for session name is GROUPID
regards,
amit m.

How webcenter maintain the session .

Similar Messages

Maybe you are looking for