How & Where to dig back those reversed payment requests by using Key Number

I have a few payment requests via bank to bank transfer that have been reversed / deleted. Since the transaction have been reversed / deleted, they will not be displayed in the list of open payment request.
How & where I can get back those payment requests if I have the key numbers.

Hi,
In T-Code F8BT, you can enter Key No. and get the list of items that were reversed. And Select "Cleared"
Regards,
SAPFICO

Similar Messages

  • HT1414 I had a new phone and I clicked some pictures and then I restore my new phone with the old back up and I lost my new clicked photos...please help me how can I get back those photos?

    I had a new phone and I clicked some pictures and then I restore my new phone with the old back up and I lost my new clicked photos...please help me how can I get back those photos?

    You were already provided the answer. If you do not have a backup of the phone while the photos were on the phone, they are gone. When you restore your phone from an old backup, anything that has been saved to the phone since that backup is deleted. Sorry.

  • HT1414 my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .

    Hi ,
    my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .
    History is my son try to enter too many time on wrong password .

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I accidentally removed my iPhone from manage devices in my iTunes account.  How do I get back on as a device to use my account?

    I accidentally removed my iPhone from manage devices in my iTunes account.  How do I get my iPhone 5s back on as a device to use my account?

    Hi jakefrombishop,
    If you changed that old ID to your current ID using Manage your Apple ID, try the following to see if it will accept your current password:
    1.     Go to Manage your Apple ID and sign on with your current Apple ID and password. EDIT the ID and change it to the old email address. This is temporary. Do NOT verify it, do NOT change the password: Apple - My Apple ID
    2.     Now on the iPhone, where it is asking for your password to turn off Find My iPhone, type in your current password
    3.     Go back to Manage your Apple ID and sign on with the old email address and your current password. EDIT the Apple ID back to your current email address. You may need to verify it again.
    Fingers crossed!
    GB

  • Hi I lost all my contact number after update ios 6. How can i get back?, hi I lost all my contact number after update ios 6. How can i get back?

    Hi
    I lost all my contact number which save on i phone 4 after update iOS6. How can i get back?

    If the contacts were stored on icloud, then be sure the device is connected to icloud (Settings>icloud) and also that contacts are turned on (on the same screen in settings).

  • Down payment request: posting using BAPI_ACC_DOCUMENT_POST

    Hello, Gurus!
    We have a problem with posting DPR using BAPI.
    We can't carry out DPR for a Vendor.
    The following parametrs were set:
    1) BSTAT = 'S'
    2) ZUMSK = 'A'
    3) BSCHL = '39' 
    4) SHKZG = 'H' 
    5) WRBTR (negative sum is written)
    6) GLVOR (business transaction) - RFBU
    7) we also set assignment to a Funds reservation document.
    When we try to execute BAPI it returns an error RE 041 "Amount in document &1 &2 may not be exceeded".
    Perhaps, FM-PSM thinks that we try post a credit memo...
    We used F-47 before, but we need to use the BAPI.

    Hi,
    I had the same problem with posting a down payment request using BAPI. Actually, it seems SAP does not allow to post this kind of document "natively". Therefore, you have to implement a BADI (ACC_DOCUMENT) in order to make it work.
    1. Be sure you have the latest notes applied for BAPI_ACC_DOCUMENT_POST (especially note 561175)
    2. As for as DP request, call BAPI with DOCUMENTHEADER, ACCOUNTRECEIVABLE and CURRENCYAMOUNT filled with your needed lines.
    In my case, I set SP_GL_IND to 'F'.
    3. In your implementation of BADI, in method CHANGE, set ACCIT-BSTAT to 'S' (noted items) so that balance check will not take it into account. You may customize your line if needed.
    This should be enough to have your document posted. I can give you more details should you need help.

  • The have stolen my laptop, how can I find it? is it possible to use serial number to find it?

    they have stolen my laptop macbook pro i7, still new and got all my research, how can i find it and is it possible to use the serial number to find it? please help

    Unless you have an active MobileMe account with Find My Phone activated for the laptop and the laptop is connected to a WiFi site, then you cannot locate it. File a police report and file with your insurance company.

  • After upgrading I lost iMovie and iPhoto! how can i get back those apps that I paid for and did know load on my system?

    After purchasing my Apple macbook PRO back in 2010. I did purchase iphoto and imovies. sudenly ater the update there was no iphoto or imovie to reload after my hardrive got damage. How can I get this app back  again?

    Are the apps hidden?
    Hidden Apps -
    http://support.apple.com/kb/HT4928

  • HT1386 I was connected to my desktop to upload pictures but I tune activated and sucked up all my phone data and notes. I don't have I tune account, how can i get back those data??

    My I phone was connected to my desktop to upload pictures, magically I tune activated and synced all my phone data and notes. I don't have Itune account.

    This happened because you had not disabled automatic syncing in iTunes (so your phone synced when you connected it to your computer).  If you haven't synced again since this happened you may be able to restore your phone to the backup created at the beginning of the sync process to recover your data.  (If you have synced again the backup is already overwritten and your data is lost).  To do this do the following:
    Without connecting your phone, open iTunes on your computer and go to Preferences.  On the Devices tab check "Prevent...from syncing automatically".
    Now connect your phone and import your photos if you haven't already done so (see http://support.apple.com/kb/HT4083).
    Now open iTunes and right-click on the name of your phone on the left side and select Transfer Purchases (to transfer any recent purchases to your iTunes library prior to restore from backup).
    Right-click on the name of your phone again and select Restore from Backup, choose your most recent backup to restore from.
    When complete, you can go back to iTunes>Preferences>Devices and re-enable automatic syncing.

  • How can I go back and forward on a webbrowser using trackpad?

    Hello
    I upgraded my os with Lion.
    in the fore version, I could use three fingers to go back and forware on the webbrowser,
    but now I can't.
    I can't find any options in any pages.
    I think that was very useful..
    How can I do it again?

    Hi Hyok:
    Go to System Preferences > Trackpad > More Gestures and make sure you have "Swipe between pages" checked. You can set it for 2 or 3 fingers or 3 fingers only.
    The other thing to keep in mind is that, in Lion, the swipe direction will be reversed from Snow Leopard. In other words, to swipe back a page in Safari, you will need to swipe towards the right instead of the left. This mimics the finger movements of the iPad and is more true to what you would do if the page was a physical object and you were moving it out of the way. It could be that you already have this box checked but aren't swiping the right direction to go backwards.
    I highly recommend giving this new swiping technique a chance, as I have found it an improvement over the old way. It took me about a week to get used to it. If you try it and really don't like it, you can go to the "Scroll and Zoom" tab in Trackpad preferences and deselect "Scroll direction: Natural".
    Hope this helps.

  • How to apply an invoice to a payment on account using Internal Rec?

    As the link invoices to previous payments is now replaced by the new Internal Reconciliation Engine, you now need to perform a Business Partner internal reconciliation.
    This seems like quite a cumbersome process.
    The steps are:
    1. Open the Business Partner
    2. Select Internal Reconciliation
    3. Select the payment (which you made previously on account)
    4. Select the invoice which you would like to apply the payment towards
    5. If the payment and the invoice don't exactly match, you now need to create a journal. So where does the other side of the entry go? One side is automatically filled in for you, being the Business Partner, the other side goes where?
    If you put the other side as the Business Partner, the journal will post, but you get a mess when you look at the BP balance:
    There will be:
    RC - receipt on account  $50
    IN - invoice $80
    JE - Journal for the difference ($30)  (negative)
    JE - Journal for the difference $30
    None of these go away if you tick the 'Display Unreconciled Trans. Only' option.
    How do others get around this?

    Hi John......
    There are two aspects of doing internal reconciliation.
    1. you want to reconcile part Invoice amount against Payment on Account
    2. You want to reconcile part Invoice amount against payment on account and accounting for rest amount of invoice should be gone to rate difference account and which you dont want to pay to your vendor.
    So the thing you are asking about the differnce amount should go to rate difference account.
    When you do the reconciliation just select the difference amount for Journal entry where diff. amount say $30 will go to rate difference account.........
    Hope this will help you......
    Regards,
    Rahul

  • How do we track back the ABAP queries/report painter used to custom report?

    Hi Experts,
    I only have some ideas about report painter and ABAP query. If a company has a number of different Z reports in production.
    1. How do we identify if it's report painter/writer or ABAP query??
    2. For ABAP query report, suppose that i can identify one. If i am given a Z tcode of that report and identify the program of that report behind it, How do i know what query that program belongs to?? What are the steps i go back in SQ03 to view that query??
    3. For report painter, starting from ztcode of the report, where do i check and track the original painter of that report??
    Please help clarify my doubts..
    Monica

    Hi Monica,
    For report painter/writer, you can identified it by go to
    Environment --> Technical information when you execute your Z-tcode.
    To refer back to the report painter/writer t-code you just need to double click oh the report group that you see by clicking the link above.
    Thanks,
    Victor.

  • How do I switch back to 3.6? I use Norton 360 and it doesn't work with Firefox 4. I have uninstalled 4 and try to reinstall 3.6 from my downloads but it deleted 3.6 exe when it installed 4. I WANT 3.6 BACK.

    Norton isn't supported on Firefox 4. I don't trust ANY web browser that I can't use Norton on. I had no complaints with it when I had Firefox 3.6. I want to reinstall 3.6 but can't. I have looked all over for a download but every one comes back to Firefox 4.

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • How do I go back to Lightroom 4.4 after using LR 5 for a month?

    I am in the process of downloading the LR5.2 Release Candidate to see if it will work at least a little better. Besides being very slow, my system is crashing regularly when LR5 is being used. It doesn't crash when LR5 is not running.
    But, I'm seriously considering going back to LR 4.4 for a while. It is still loaded, but it will not open a catalog made with LR 5.
    My LR4.4 last files were made a month or so ago, so if I went back to the last one, it'd be missing all the files I added since switching over to 5.
    What is the easiest way for me to be able to open the new catalog in the old version?
    Or, do I open the last working 4.4 catalog and tell it to sync itself. That'd be adding about 4000 files, but I am not sure it'd know to find any new folders I might have created. FWIW, my main catalog has around 190,000 images right now.
    Windows 7 Ultimate 64 bit, with 12 gigs of ram.
    Thanks,
    M. Jackson

    You can't read Lr5 catalogs with Lr4, so do this instead:
    Save (xmp) metadata in Lr5, then quit.
    Reload previous (Lr4) catalog in Lr4.
    Import new photos in Lr4 (those in Lr5 catalog that weren't/aren't in Lr4 catalog yet), and read (xmp) metadata for older photos edited in Lr5.
    You'll lose edits that aren't compatible, and other changes made to Lr5 catalog but not in Lr4 catalog will be lost, but that's the best you can do (short of using plugins and/or SQL to recover more stuff, I mean).
    R

  • How do I get back my second search bar (box) using firefox?

    After updating Java I lost one of my search-bars. I want to be able to search in the address bar (location bar) AND the search bar. I know that they've been combined on some of the updates. However; I want to have both and have tried multiple things to try to recover it as I've been able to keep it through firefox and other updates until my last Java update. I went back to restore before Java update and that did not bring it back. Thanks!

    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible:
    *Firefox menu button > Options
    *View > Toolbars (press F10 to display a hidden menu bar)
    Open the Customize window to set which toolbar items to display:
    *Firefox menu button > Options
    *View > Toolbars (press F10 to display the menu bar)
    *Right-click empty toolbar area
    *check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    You can check for problems with the localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

Maybe you are looking for