How will extend the Filesystem on solstice disksuite

Hi Friends,
In Solstice disk suite one of the filesystem has reached 90%, After doing house keeping finally it has reached 80%.
However we are planned to extend the Filesystem.
We have informed to management to procure 2* 18 Gb Hdd.
I am not familiar in the Solstice disk suite, could you please provide me a procedure to extend the Filesystem on Solstice disk suite,
Please find the following output below:-
/dev/md/dsk/d8 52222754 41701831 9998696 81% /data
# metastat d8
d8: Mirror
Submirror 0: d6
State: Okay
Submirror 1: d7
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 106070958 blocks
d6: Submirror of d8
State: Okay
Size: 106070958 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t8d0s0 0 No Okay
Stripe 1:
Device Start Block Dbase State Hot Spare
c1t9d0s0 3591 No Okay
Stripe 2:
Device Start Block Dbase State Hot Spare
c1t10d0s0 4712 No Okay
Stripe 3:
Device Start Block Dbase State Hot Spare
c1t11d0s0 4712 No Okay
d7: Submirror of d8
State: Okay
Size: 106070958 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c5t0d0s0 0 No Okay
Stripe 1:
Device Start Block Dbase State Hot Spare
c5t1d0s0 3591 No Okay
Stripe 2:
Device Start Block Dbase State Hot Spare
c5t2d0s0 4712 No Okay
Stripe 3:
Device Start Block Dbase State Hot Spare
c5t3d0s0 4712 No Okay
Many Thanks
Karthick

Have a look for a solution here it sounds like your issue http://discussions.apple.com/thread.jspa?threadID=1780505&tstart=0, hope it helps.

Similar Messages

How to Extend an AM and in what case you will extend the AM

Hi OAF Gurus,
Please explain How to Extend an AM and in what case you will extend the AM.
Thanks in advance
Kumar

Hi,
please go throughwith below link provied by anil...
http://oracleanil.blogspot.com/2010/11/am-extension-in-oaf.html
Regrads
Meher Irk

How to extend the validity period of Cost estimate

Hi Gurus,
The validity period of Standard Cost estimate is up to the end of fiscal year. how can we get the same Cost estimate from the begining of new fiscal year.
for example let Materila X, which has 550 as a Cost estimate.the validity period of this cost estimate is up to 31/03/2009. now i want same cost estimate for Material X, from 01/04/2009 on wards.
is it possible to get the same cost estimate from the 01/04/2009 or Do I need to run CK11N, CK24?
can anybody help me.
Thanks&Regards
Prareddy

hi,
If you want to get the same cost estimate for future use. You have to create a new cost estimate using the Dates as below
Costing date from :01/04/2009
Costing date to :Any date you desire (preferably end of 2009 financial year)
Qty structure date: As of your previous cost estimate for the material X
Valuation date :As of your previous cost estimate for the material X
Using this procedure you will have the old costs ie 550 in the cost estimate but will extend the same to as long as you desire.
Revert back for more information
Thanks

How to extend the range of my Airport Extreme network by adding an Airport Express

How to extend the range of my Airport Extreme network by adding an Airport Express?

You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
The instructions that I will provide are for using AirPort Utility 6.0, which you have.
Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
Make sure that the wireless is turned on your Mac
Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
Click on the rectangle, and then click on the AirPort Express xxxxxx listing
AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that the Express be configured to "Extend" your wireless network.
Edit the Base Station name to your liking, then click Next in the lower right hand corner
Allow a full minute or two let AirPort Utility do its work
When you see Setup Complete, click Done at the lower right of the window.
Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
You should be in business.

Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you

Hi,
Can someone help.
I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
Also I intend to extend it with Airport Extreme.
Please help.
Thank you.

Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
Is that really what you want to do?
If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
Please start another post to tell us exactly.......
What device will be the main router providing your Internet connection and wireless network
What device will extend the network
What operating system that you have on your Mac or PC

How to extend the 1k size limit of ODBC?

Hi everyone,
My problem is if my SQL string size is over 1k, then ODBC driver will fail. How to extend
the size?
Thanks,

OK, just for clarity, there are two limits that you may be running up against.
1) There's a limit on the total length of a SQL statement. I would tend to consider it a bug if you could SQLExecDirect a 4k statement by passing in the actual length of the string, but only a 1k statement by indicating that the string is NULL-terminated. If that's actually what you're seeing, you may want to contact Oracle support. I believe this limit was increased between Oracle7 & Oracle8, 512 -> 4096 characters IIRC.
2) There's a limit on the length of a string literal which should correspond to the maximum size of a varchar2 column. If this is the limit you're hitting, then you want to go the prepare/ bind/ execute route I explained in the previous post.
Justin

How to extend the JVue applet class using ActiveX Control

My SR recommendation was to post this here:
) How to Extend the JVue Applet class
This is the preferred solution. However, when using the ActiveX control, my derived JVue class that is specified in autovue.properties is not being instantiated.
Your ActiveX bridge looks like it's hard coding a "new JVue()" which means I have no integration hook using the ActiveX control.
To reiterate, if I extend JVue to add functionality and specify it in the autovue.properties, it is picked up when I run it standalone but if I use the ActiveX component, it is not being picked up.
I have already read all the documentation, have had web conferences with Mahmood and Jeff Chapman and the engineering staff who recommended this approach as the preferred option.

We have a need to override certain VueBean/JVue method calls to meet our document handling(documents need to handle metadata information and hence change the document loading cycle, ie markup loading/XRef resolution is dynamic). Also the invokeAction/invokeSubAction do not allow parameter passing(which we have requirements for certain actions again due to metadata) so we would like to override the invokeAction method to include custom processing(we will encode the action with parameters).
We are already using Custom VueActions for other simpler UI event handling that don't have parameter requirements.
As I said above, these use cases were relayed to the engineering team and senior staff members in early December and we were told that we could proceed with overriding the main class in the autovue.properties file. I have SR(s) opened with a long thread detailing this so I really don't want to go through this again.
A custom VueAction does not seem to work because it binds to late in the object call/event stream.

How to extend the functionality of Smtp through servlets

hi
will some one tell me how to extend the functionality of SMTP server through servelts
bye

[samreenkazi],
Here's some code that might help you get a servlet to send e-mails out by using the sun.net.smtp.SmtpClient class:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import sun.net.smtp.SmtpClient;
public class SendMailMessageServlet extends HttpServlet {
static final String to = "[email protected]";
        public void doGet(HttpServletRequest req, HttpServletResponse res)
                                        throws ServletException, IOException {
                res.setContentType("text/html");
                PrintWriter out = res.getWriter();
                //grab the values of each field
                String name = req.getParameter("name");
                String feedback = req.getParameter("feedback");
                String mailfrom = req.getParameter("mailfrom");
                //Notify the sender of his/her feedback
                out.println("<HTML>");
                out.println("<HEAD><TITLE>Mail sent successfully</TITLE></HEAD>");
                out.println("<BODY>");
                out.println("Your e-mail has been sent successfully");
                out.println("</BODY></HTML>");
                //Send an e-mail
                SmtpClient smtp = new SmtpClient(); //assume localhost
                smtp.from(mailfrom);
                smtp.to(to);
                PrintStream msg = smtp.startMessage();
                msg.println("To: " + to); // mailers will display the To: address
                msg.println("From: " + mailfrom); //mailers will display the From: address
                msg.println("Subject: Hello World !");
                msg.println();
                msg.println("Hello World");
                smtp.closeServer();
}Note that the sun.net.smtp.SmtpClient class has limited capabilities. A better alternative is to use the JavaMail API and when you download the JavaMail packages, there are some sample example code that may help you.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

How to extend the windows 2003 C drive

How to extend the windows 2003 C drive ..? one of my DC is running out of space.
Please advice
Krishna

If you make a BartPE bootable ISO or CD, you can add a 'DiskPart' folder in your Plugins folder. Then put the following contents inside that 'DiskPart' folder. The file name should be "DiskPart.inf"
This will allow you to boot from the BartPE CD, open a command prompt, and use Diskpart like you would from within Windows normally. We extended C drives of old systems (VMs) many times this way. I'm reasonably sure our BartPE CD is based
of Server 2003 Standard SP2.
[Version]
Signature= "$Windows NT$"
[PEBuilder]
Name="Diskpart functionality in Win2k3 - SP1 only"
; Assisted with this understanding was:
; http://support.microsoft.com/?kbid=910380
; http://technet2.microsoft.com/WindowsServer/en/Library/89c3a36a-d3e2-4462-8893-7a384b118c6b1033.mspx
; http://windowssdk.msdn.microsoft.com/library/default.asp?url=/library/en-us/vds/base/vds_interfaces.asp
Enable=1
[SourceDisksFiles]
Ftdisk.sys=4
Partmgr.sys=4
Volsnap.sys=4
Swprv.dll=2
Eventcls.dll=2
Vssadmin.exe=2
Vssapi.dll=2
Vssui.dll=2
Vssvc.exe=2
Vss_ps.dll=2
Diskpart.exe=2
[Default.AddReg]
; Runs dependent DLL registration for Application usage
; 0x1= REG_SZ
; 0x2= REG_EXPAND_SZ
; 0x1, "Software\Microsoft\Windows\CurrentVersion\Run", "DiskPartSupport", "%systemroot%\system32\regsvr32.exe /s %systemroot%\system32\vss_ps.dll"
; removed because the reg key is not read unless you use explorer as a shell.
[SetupReg.AddReg.3790]
; Win2k3 SP1 Only: RpcSS needs to lanuch DComLaunch Service first.
0x7, "ControlSet001\Services\RpcSs","DependOnService","DcomLaunch"
; New DComLaunch Service in Win2k3 SP1
0x1,"ControlSet001\Services\DcomLaunch","Description","DCOM Services"
0x1,"ControlSet001\Services\DcomLaunch","DisplayName","DCOM Services"
0x4,"ControlSet001\Services\DcomLaunch","ErrorControl",0x1
0x1,"ControlSet001\Services\DcomLaunch","Group","Event Log"
0x2,"ControlSet001\Services\DcomLaunch","ImagePath","svchost -k DcomLaunch"
0x1,"ControlSet001\Services\DcomLaunch","ObjectName","LocalSystem"
0x4,"ControlSet001\Services\DcomLaunch","Start",0x2
0x4,"ControlSet001\Services\DcomLaunch","Type",0x20
0x3,"ControlSet001\Services\DcomLaunch","FailureActions",\
00,00,00,00,00,00,00,00,00,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,60,\
ea,00,00
0x1,"ControlSet001\Services\DcomLaunch\Enum","0","Root\LEGACY_DCOMLAUNCH\0000"
0x4,"ControlSet001\Services\DcomLaunch\Enum","Count",0x1
0x4,"ControlSet001\Services\DcomLaunch\Enum","NextInstance",0x1
0x2,"ControlSet001\Services\DcomLaunch\Parameters","ServiceDll","rpcss.dll"
0x3,"ControlSet001\Services\DcomLaunch\Security","Security",\
01,00,14,80,b4,00,00,00,c0,00,00,00,14,00,00,00,34,00,00,00,02,00,20,00,01,\
00,00,00,02,80,18,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,00,00,20,02,\
00,00,02,00,80,00,05,00,00,00,00,03,18,00,8d,00,02,00,01,01,00,00,00,00,00,\
01,00,00,00,00,00,00,00,00,00,03,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,\
20,00,00,00,20,02,00,00,00,03,18,00,8f,00,02,00,01,02,00,00,00,00,00,05,20,\
00,00,00,23,02,00,00,00,03,18,00,9d,00,00,00,01,01,00,00,00,00,00,05,04,00,\
00,00,23,02,00,00,00,03,18,00,9d,00,00,00,01,02,00,00,00,00,00,05,20,00,00,\
00,21,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,\
12,00,00,00
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","Service","DcomLaunch"
0x4,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","Legacy",0x1
0x4,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","ConfigFlags",0x0
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","Class","LegacyDriver"
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","ClassGUID","{8ECC055D-047F-11D1-A537-0000F8753ED1}"
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","DeviceDesc","DCOM Services."
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000\Control","ActiveService","DcomLaunch"
0x4,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH","NextInstance",0x1
[Software.AddReg]
0x1,"Classes\CLSID\{E0393303-90D4-4A97-AB71-E9B671EE2729}",,"VDS ProxyStub"
0x2,"Classes\CLSID\{E0393303-90D4-4A97-AB71-E9B671EE2729}\InprocServer32",,"%SystemRoot%\System32\vds_ps.dll"
0x1,"Classes\CLSID\{E0393303-90D4-4A97-AB71-E9B671EE2729}\InprocServer32","ThreadingModel","Both"
0x1,"Classes\CLSID\{F2C2787D-95AB-40D4-942D-298F5F757874}",,"PSFactoryBuffer"
0x2,"Classes\CLSID\{F2C2787D-95AB-40D4-942D-298F5F757874}\InprocServer32",,"%SystemRoot%\System32\vds_ps.dll"
0x1,"Classes\CLSID\{F2C2787D-95AB-40D4-942D-298F5F757874}\InprocServer32","ThreadingModel","Both"
0x1,"Classes\Interface\{88306BB2-E71F-478C-86A2-79DA200A0F11}",,"IVdsVolume"
0x1,"Classes\Interface\{88306BB2-E71F-478C-86A2-79DA200A0F11}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}",,"IVdsCreatePartitionEx"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{98F17BF3-9F33-4F12-8714-8B4075092C2E}",,"IVdsHwProviderPrivate"
0x1,"Classes\Interface\{98F17BF3-9F33-4F12-8714-8B4075092C2E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{9AA58360-CE33-4F92-B658-ED24B14425B8}",,"IVdsSwProvider"
0x1,"Classes\Interface\{9AA58360-CE33-4F92-B658-ED24B14425B8}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{CB53D96E-DFFB-474A-A078-790D1E2BC082}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{D188E97D-85AA-4D33-ABC6-26299A10FFC1}",,"IVdsAdmin"
0x1,"Classes\Interface\{D188E97D-85AA-4D33-ABC6-26299A10FFC1}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{D5D23B6D-5A55-4492-9889-397A3C2D2DBC}",,"IVdsAsync"
0x1,"Classes\Interface\{D5D23B6D-5A55-4492-9889-397A3C2D2DBC}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{D99BDAAE-B13A-4178-9FDB-E27F16B4603E}",,"IVdsHwProvider"
0x1,"Classes\Interface\{D99BDAAE-B13A-4178-9FDB-E27F16B4603E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{DAEBEEF3-8523-47ED-A2B9-05CECCE2A1AE}",,"IVdsMaintenance"
0x1,"Classes\Interface\{DAEBEEF3-8523-47ED-A2B9-05CECCE2A1AE}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}",,"IVdsServiceLoader"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}",,"IVdsCreatePartitionEx"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}",,"IVdsServiceLoader"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}",,"IVdsLunPlex"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}",,"IVdsLunPlex"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0818A8EF-9BA9-40D8-A6F9-E22833CC771E}",,"IVdsService"
0x1,"Classes\Interface\{0818A8EF-9BA9-40D8-A6F9-E22833CC771E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{07E5C822-F00C-47A1-8FCE-B244DA56FD06}",,"IVdsDisk"
0x1,"Classes\Interface\{07E5C822-F00C-47A1-8FCE-B244DA56FD06}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0316560B-5DB4-4ED9-BBB5-213436DDC0D9}",,"IVdsRemovable"
0x1,"Classes\Interface\{0316560B-5DB4-4ED9-BBB5-213436DDC0D9}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{3540A9C7-E60F-4111-A840-8BBA6C2C83D8}",,"IVdsLun"
0x1,"Classes\Interface\{3540A9C7-E60F-4111-A840-8BBA6C2C83D8}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{33B87426-5C06-49F4-84BD-F486B1B4A21D}",,"IVdsMigrateDisks"
0x1,"Classes\Interface\{33B87426-5C06-49F4-84BD-F486B1B4A21D}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{11F3CD41-B7E8-48FF-9472-9DFF018AA292}",,"IVdsProviderPrivate"
0x1,"Classes\Interface\{11F3CD41-B7E8-48FF-9472-9DFF018AA292}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{118610B7-8D94-4030-B5B8-500889788E4E}",,"IEnumVdsObject"
0x1,"Classes\Interface\{118610B7-8D94-4030-B5B8-500889788E4E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{10C5E575-7984-4E81-A56B-431F5F92AE42}",,"IVdsProvider"
0x1,"Classes\Interface\{10C5E575-7984-4E81-A56B-431F5F92AE42}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{E882C452-CF37-482A-BBFF-E6EE614E8023}",,"IVdsSwProviderPrivate"
0x1,"Classes\Interface\{E882C452-CF37-482A-BBFF-E6EE614E8023}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{EE2D5DED-6236-4169-931D-B9778CE03DC6}",,"IVdsVolumeMF"
0x1,"Classes\Interface\{EE2D5DED-6236-4169-931D-B9778CE03DC6}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{FF24EFA4-AADE-4B6B-898B-EAA6A20887C7}",,"IVdsDrive"
0x1,"Classes\Interface\{FF24EFA4-AADE-4B6B-898B-EAA6A20887C7}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{3B69D7F5-9D94-4648-91CA-79939BA263BF}",,"IVdsPack"
0x1,"Classes\Interface\{3B69D7F5-9D94-4648-91CA-79939BA263BF}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{4AFC3636-DB01-4052-80C3-03BBCB8D3C69}",,"IVdsServiceInitialization"
0x1,"Classes\Interface\{4AFC3636-DB01-4052-80C3-03BBCB8D3C69}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{4DAA0135-E1D1-40F1-AAA5-3CC1E53221C3}",,"IVdsVolumePlex"
0x1,"Classes\Interface\{4DAA0135-E1D1-40F1-AAA5-3CC1E53221C3}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{54D1F9E3-7FD3-421A-AF9C-53C2D8EE5BCF}",,"IVdsOwnershipChangeQuery"
0x1,"Classes\Interface\{54D1F9E3-7FD3-421A-AF9C-53C2D8EE5BCF}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{6E6F6B40-977C-4069-BDDD-AC710059F8C0}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{6FCEE2D3-6D90-4F91-80E2-A5C7CAACA9D8}",,"IVdsSubSystem"
0x1,"Classes\Interface\{6FCEE2D3-6D90-4F91-80E2-A5C7CAACA9D8}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{8326CD1D-CF59-4936-B786-5EFC08798E25}",,"IVdsAdviseSink"
0x1,"Classes\Interface\{8326CD1D-CF59-4936-B786-5EFC08798E25}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
Brian / ChevyNovaLN

How will check the space taken by a single table in a tablespace ?

How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls reply

I need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How will schedule the BW report in the Background ?

Hi
Small query, i have one management report in the BI, which should be run early morning and send mail to the GM,
We can schedule the ABAP report but no the BW !!!!
How will schedule the BW report in the Background ?
How the mail send to the GM ?
Please advise us
REgards
Anwer Waseem
SAP BASIS

Reporting Agent will be only supported in the 3.X runtime in 2004s,start using Bex Broadcaster.Reporting agent is going to be obsolete or is would say.
All the new functionalities will be implemented in Broadcaster only.
Advantage -The old Reporting Agent in BW 3.x could pre-calculate the data of a template and access it through the URL . It could not broadcast queries, workbooks or web templates by email or to KM folders.
https://websmp203.sap-ag.de/~sapdownload/011000358700004219392005E/ERQA_INFOBROADCASTING.PDF
http://csc-studentweb.lrc.edu/swp/Berg/articles/Reporting_Analytics_2006_Broadcasting_v10.ppt
Note 760775 - Settings for Information Broadcasting
Hope it Helps
Chetan
@CP..

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

Hi trineram,
Welcome to the Support Communities!
The article below may be able to help you understand the parameters for adding music to an iMovie for iOS project.
iMovie for iOS (iPad): Add background music
http://support.apple.com/kb/PH3192
Cheers,
- Judy

How to extend the time line for the premiere on mac pro mavericks

how to extend the time line for the premiere on mac pro mavericks

Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x

How will extend the Filesystem on solstice disksuite

Similar Messages

Maybe you are looking for