How will i put my one coloum text in to dat coloum only in sapscrits

i have created an sapscript for invoice.
in dat all details are coming in dat table.
but the problem is dat ,
i have 5 coloum i.e
itemno.    matnrno.      description        quantity      netprice
10            dcpp11        this is the description of   20.00
50000.00
20            dcp23        this is thesecond material    35.00
40000.00
the problem is, if description details is longer, then it goes to quantity column and if shorter, then quantity value comes to description coloum.
i have used paragraph format but not geeting it.
also used condensed (c) , but no result..

Hi,
Try to fix the length for each column using TAB's in Paragraph format.
eg:
P1          - Paragraph format name
Tabs:
1       6 CH (since item no(posnr) is of length 4, i am allocation 5(4+1) and printing material No. starts from 6 CH)
2     25 Ch (since material no(matnr) is of length 18, from 25 (1861) printing Material Des. starts)
Use ',,' while printitng the values of Item No,,Materialno.,,...
',,' - Indicates the tab position.
Hope i made u clear!!
Rgds,
Pavan

Similar Messages

How will I put a background Image in a JPanel?

Can you help me on how will I put a background image in a JPanel?
And also in a JDeskTopPane?

Hint:
Search the forum using two keywords in your subject. This question had been asked many times.

Can you put line break in text in the data box when creating a chart. i.e. if you have a bar chart

Can you put line break in text in the data box when creating a chart.
i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
Thanks

http://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html
See "Enter labels"

HT4623 How do I put a signature on text

How do I put a signature on text

Where are you wanting to have a signature?
If you mean you want some test to automatically appear at the end of your emails, go to Settings > Mail, Contact, Calendar > scroll down to Singature and type it there.

How do i put a loop round this so the user can only enter a number between

how do i put a loop round this so that the user can only enter a number between 1 and 3 if a number like 4 is enter it will just say something like retry
if (CA.trim().equals(ans1)){
Out = "incorrect";
else if(CA.trim().equals(ans2)){
Out = "incorrect";
else if(CA.trim().equals(ans3)){
Out = "correct";
else{
System.out.println("Enter 1 2 or 3 try doin test again");
System.out.println(Out);
byte b[] = Out.getBytes();
out1.write(b);

You already know the conditions so here's some pseudocode.
get input
while(input is not what I want (between one and three))
Inform user of improper input and ask for it again
get new input

My iphone has been stolen so i went to icloud and did the remote wipe/erase. but it says offline pending erase. how will i know when my pictures and all other data have been erased?

help
my iphone has been stolen i did the auto erase online but my phone is offline pending erase i cant bare to think someone has acces to my phots and pictures. how will i know when the erase has been succesful

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

How do you put rules around a text box ina pages layout template? The inspector tab seems to allow rules on top, bottom or both, but not on all four sides.

How do you two format facing pages to appear as a single page for a photo spread?

It seems you have one question in the title and another in the post.
1. Select the text box. In the Inspector palettes Graphic tab choose Stroke. You can chose Line or Frame.
2. See this discussion Double Page Spread?

How do i put an image behind text?

Can someone explain the steps in order for me to put a jpeg
image BEHIND my text. I placed a layout cell within a table, and i
typed my text in it. But now i have this watermark image i want
behind the text...
please help..thanks...
chal111

As Walt says - you need to use CSS to declare the background
for the
cell..maybe this will help:
http://www.dreamweaverresources.com/tutorials/pagebackgrounds/cellbackground.htm
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"chal7ds" <[email protected]> wrote in
message
news:er5sb9$gl8$[email protected]..
> Can someone explain the steps in order for me to put a
jpeg image BEHIND
> my
> text. I placed a layout cell within a table, and i typed
my text in it.
> But now
> i have this watermark image i want behind the text...
>
> please help..thanks...
>
> chal111
>

After install infra and mid tier, how do I put into one Farm?

If I installed the infra , then the mid tier (all on one machine) How do I include the mid tier in the a farm that includes the infra i already installed? How do I
link the mid tiers to the infra. I can link to both , which have separate ports 1810 and 1811?
thanks!
maria

You can re-download the software from Download CS5.5 products
Install and enter your serial number when prompted.
Find your serial number quickly

How Do I Put A Pause In Text-To-Speech?

What character do I need to use in a sentence to get the TTS voice to pause?
Thanks!

How about adding a colon, semi-colon or even comma, depending on the grammar?
HTH
Archie

How to insert values using pushputtons in text item & fetch data based on

Dear friends,
I want to insert values in the Text item using pushbutton e.g to insert 05CST884 into text item using pushbuttons '0' '5' 'C' 'S' 'T' '8' '8' '4' (alpha numeric buttons) in the layout editor and then fetch data based on the number entered with that of one in the table in the another text item2 in the layout editor.
Suggestions regarding how to develop and use effective triggers are welcome.

At the block level (for the control block where all your push buttons are, let's call it block1) create a WHEN-BUTTON-PRESSED trigger. Your [A-Z] and [0-9] buttons should be on a dedicated non-database datablock to reduce problems. As stated previously, this trigger should just contain the code:
:block2.text_item := :block2.text_item||get_item_property(:system.trigger_item, label);
Also on the pushbutton block, create a backspacve button with its own dedicated WHEN-BUTTON-PRESSED trigger containing:
if length(:block2.text_item) > 0 then :block2.text_item := substr(:block2.text_item, 1, length(:block2.text_item)); end if;
This will hopefully erase the last character entered.
block2 should be based on the database table (see Property Palette --> Database) you wish to query and text_item should be based on the database item which contains the code you entered. All the other database items you wish to displayshould also be added to block2.
Add another FIND push button to block1 with the code:
go_block('block2');
execute_query;
Without writing the whole thing for you, I'd suggest you get a decent Forms tutorial book to guide you through the basics (Oracle Forms Developers Handbook).

How to read a file with both text and binary data?

For text data I use a BufferedReader,
for binary data I use a DataInputStream.
Since readLine is deprecated in DataInputStream, how can I read in a proper way a file that contains some lines of text followed by some binary data.
Is there a way to do this without writing a new 'readLine' for DataInputStream (that has to take into account the different newlines for Unix en other OS's)?

sorry about that ^
NEW STRING str
WHILE there is stuff in the file DO
    getByte()
    IF reading a string THEN
        WHILE byte is not a return character DO
            convert the byte to character/string
            append char to str
        WEND
    ELSE IF reading raw data THEN
        parse raw data
        do stuff with it
    END IF
WEND

How can I create a one time cron schedule that would execute only once in C#?

I have used cron schedule in C# to create an application that should trigger a job only once. This code piece is throwing an exception, An unhandled exception of type 'Quartz.SchedulerException' occurred in Quartz.dll
Below is my code:
class Program
static void Main(string[] args)
Test();
public static void Test()
ISchedulerFactory schedulerFactory = new StdSchedulerFactory();
IScheduler scheduler = schedulerFactory.GetScheduler();
IJobDetail jobDetail = JobBuilder.Create<SatellitePaymentGenerationJob>()
.WithIdentity("TestJob")
.Build();
Console.WriteLine(DateBuilder.DateOf(16, 30, 00, 24, 2, 2015));
//ITrigger trigger = TriggerBuilder.Create()
// .ForJob(jobDetail)
// .WithCronSchedule("0 0 12 20 4 ? *")
// .WithIdentity("TestTrigger")
// .StartNow()
// .Build();
ITrigger trigger = TriggerBuilder.Create()
.WithDescription("Once")
.WithSimpleSchedule(x => x.RepeatForever().WithRepeatCount(1))
.StartAt(DateBuilder.DateOf(12, 43, 00, 26, 2, 2015))
.Build();
scheduler.ScheduleJob(jobDetail, trigger);
scheduler.Start();
internal class SatellitePaymentGenerationJob : IJob
public void Execute(IJobExecutionContext context)
Console.WriteLine("test");
I believe that the way I have done scheduling to be execute only once is causing the issue. Please advice.
mayooran99

Hi mayooran99,
From the additional information: Repeat Interval cannot be zero. The screenshot
as below.
You should specify a repeat interval in seconds.
Please try the following code
ITrigger triggers = TriggerBuilder.Create()
.WithDescription("Once")
.WithSimpleSchedule(x => x
.WithIntervalInSeconds(20)
.RepeatForever())
.StartAt(DateBuilder.DateOf(12, 43, 00, 26, 2, 2015))
.Build();
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to put the part of text behind someone a shape or a shape?

I was thinking about something since I've gotten into magazines recently and the design of them. I was wondering how do they put part of the text behind a person on a magazine cover? Or like have have the text look like it's going around a person(like with some parts behind some parts in front of person like a ring of text around a person or a letter "O" encircling someone? I know how to achieve this in photoshop (in a probably non-standard way) but I have no clue how you would achive this in Indesign. I've attached some examples of what I'm talking about.

How are your Photoshop skills? Because you’ll need to them to silhouette the model. I’d probably just add the magazine title there, too.
I guess I've always sort of wondered about this...you can do it in Photoshop, sure. But...should you?
I mean, in Photoshop you split your image into two layers, a foreground layer and a background layer (via whatever mechanisms you like. Magic Wand tool, etc., etc.). And then you add a 3rd layer for the text inbetween those layers.
But if your cover is normally layed out in InDesign, you've got the text in InDesign already. And what if the text is more complicated than just a plain old title.
Do you split your Photoshop file into two seperate files (with transparency) and place them on seperate InDesign layers with the text on an ID layer inbetween?
That seems a bit awkward. Is there a neater solution?
(I suppose what I would really want would be the ability to have ID insert a layer of ID objects inbetween the two layers of the Photoshop file, and we know that's not possible....)
I suppose another approach is to keep 2 layers in the Photoshop file and place the image twice, on top of itself, with different layer visibility options in each one. I'm not sure if this is a Clever Idea or a Stupid Trick That Hurts.
I dunno!

How do i put bold on a specific row text i a Table

Hej
I want to put a bold font on a text to show that this day is booked in my calendar. Im creating the Table in one class (MyCalendar) and then i pass that table to the GUI which shows the table.
So, how to i put bold on a text when i create the table in MyCalendar (I have marked the code where i want bold):
public DefaultTableModel calendarMonthArray(int year, int month, int daysInMonth)
        String[] columnNames = {"Man", "Tirs", "Ons", "Tors", "Fre", "Lr", "Sn"};
        Object[][] data = new Object[5][columnNames.length];
        int days = 1;
        for(int i = 0 ; i <= 4; i++)
            for(int j = 0 ; j <= 6; j++)
                if(days <= daysInMonth){
                    if(bookingList.checkDate(year, month, days))
                        data[i][j] = days; *<--- Here i want to add bold on the text because there the day is booked*
                    }else{
                        data[i][j] = days;
                    days++;
        table = new DefaultTableModel(data, columnNames);
        return table;
    }

if(days <= daysInMonth){
                    if(bookingList.checkDate(year, month, days))
                        data[i][j] = days; *<--- Here i want to add bold on the text because there the day is booked*
                    }else{
                        data[i][j] = days;
                    }instead of having the condition check here you should put it in the GUI logic where you are putting the content of this table.
Ok. you might not have access to bookingList there then second solution is declaring one more array of type boolean and set it to true where you need bold on the text. send
the same to your GUI Logic.

How will i put my one coloum text in to dat coloum only in sapscrits

Similar Messages

Maybe you are looking for