How will the applications gets translated using Globalization

Hi,
By using the Apex user guide, I have done with the multilingual process but not able to view the translated application in the application builder list, How can I get the arabic language gets effected in my applications(Apex).
What are the steps I need to follow?
Please help.
Thanks in advance.
PNR

If you're asking about compatibility, that would be something you would need to ask of the app developers, though most apps compatible with Mountain Lion should be compatible with Mavericks. You can also consult the tables here:
http://roaringapps.com/apps
though that information comes from user reports and so should not be considered authoritative.
If you're asking whether installing Mavericks will delete your apps, no, it won't, though a good backup is always highly recommended.
Regards.

Similar Messages

HT201441 How will the device get connected to the internet if it's locked and is wifi only?

My daughter left her purse in a fitting room briefly and once she realized this, it was gone. In her purse was her iPad mini wifi only. I am curious how would the iPad get connected to the internet if it is locked? I have find my iPhone activated and since it is a iOS 7 device I put in lost mode and set it to display my phone # and a message for a reward. I am guessing it would have to be wiped clean somehow and re activated to be signed into to get hooked to the internet. Am I on the right track that once this is done and it gets connected to the internet the device will display this message? Any comments will help thank you.

Thank you for your imput Winston. But how is the IPad going to connect when you physically have to put in the wifi password for the wifi? I guess the iPad would be able to access a unsecured wifi? I also read what I believe is conflicting with your statement about iOS 7 that you can send the remote erase and still be able to track? I havent done this yet I want to be certain that if I erase it remotely I can still track. Thanks again for your time.

How will the new OSX Mavericks affect applications already installed and using Mountain Lion?

How will the new OSX Mavericks affect applications already installed and using Mountain Lion?

If you're asking about compatibility, that would be something you would need to ask of the app developers, though most apps compatible with Mountain Lion should be compatible with Mavericks. You can also consult the tables here:
http://roaringapps.com/apps
though that information comes from user reports and so should not be considered authoritative.
If you're asking whether installing Mavericks will delete your apps, no, it won't, though a good backup is always highly recommended.
Regards.

Purchased ExportPDF for one of our end using depts. It is under my account I manage for our institution. How does the dept get the application to download.

Purchased ExportPDF for one of our end using depts. It is under my account I manage for our institution. How does the dept get the application to download.

Hi Cassi,
If you are ordering subscriptions for various people in your office, it would be best to sign up under their Adobe IDs, so they can log in and use the subscription with their own credentials. As for moving the current subscription, the easiest route is to cancel the current subscription (see Cancel your membership or subscription | Acrobat, Acrobat.com online services--or I can help), and then reorder as necessary.
Best,
Sara

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me out

Hi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

How will i be able to use my micro sim card from my iPhone 4s, in the nano sim card tray in the iphone 5?

How will i be able to use my micro sim card from my iPhone 4s, in the nano sim card tray in the iphone 5?

You can't. The nano SIM is 15% thinner compared to its previous two generations, so even if it is cut in the same size, the thickness would be different, meaning the cut micro SIM cannot fit into the nano SIM slot.

I'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

i'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

you are welcome

How do the application servers connect the new database after failing over from primary DB to standby DB

How do the application servers connect the new database after failing over from primary DB to standby DB?
We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround.
Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
Oracle support provides us the answer as following:
==================================================================
Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
FAN server-side callouts can be configured on the database tier.
FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
=======================================================================================
Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
Thank very much in advance.

Hi mesbeg,
Thanks alot.
For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
        <subsystem xmlns="urn:jboss:domain:datasources:1.0">
        <datasources>
                <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
                    <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
                    <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
                    <driver>oracle</driver>
                    <pool>
                        <min-pool-size>2</min-pool-size>
                        <max-pool-size>10</max-pool-size>
                        <prefill>true</prefill>
                    </pool>
                    <security>
                        <user-name>TEST_USER</user-name>
                        <password>Password1</password>
                    </security>
                    <validation>
                        <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
                        <validate-on-match>false</validate-on-match>
                        <background-validation>false</background-validation>
                        <use-fast-fail>false</use-fast-fail>
                        <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
                        <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
                    </validation>
                </datasource>
                <drivers>
                    <driver name="oracle" module="com.oracle.jdbc">
                        <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
                    </driver>
                </drivers>
            </datasources>
        </subsystem>
If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

Will the Application Scope be shared across the cluster in a multi-node OC4

Hi,
I have the following requirement:
Users of the application can only have single (browser) session. When a user who already has a session connects again, he should no longer be allowed to access the older session.
My proposed implementation is:
- After successful login – possibly using a Session Listener - an entry is made in a HashMap UserSessions that lives in the application scope. Key is the username, value is the session id (HttpSession.getId()).
- For every request, using a ServletFilter, we check whether the session is still in the UserSessions HashMap for the current user. If a new session has been created for the same user, the session id for that new session is in the UserSessions map and the servletfilter will not find the session. In that case, the filter should invalidate the session and forward to the user to an error page.
However, the application will run on a multi-node OC4J cluster. I am starting to wonder:
Will the Application Scope be shared across the cluster in a multi-node OC4J environment?
I know session state can be shared. But what application state/scope?
Does anyone know? Do I have to do anything special in the cluster or the application to get this to work?
Thanks for your help.
Lucas

gday Lucas --
Application scope is not replicated across JVM boundaries with OC4J.
I'm sure this used to be described in the doc, but I can't find it now from a quick scan.
If you wanted to use this type of pattern, you could look to use a Coherence cache as distribution mechanism to share objects across multiple JVMs/nodes.
-steve-

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

I have two apple id accounts ,when i used to update application it used to prompt a default id and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .

i have two apple id accounts ,when i used to update application it used to prompt a default id (the old one) and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .
it just prompt the old id which im not signed in with im signed in using the new id and when i cancel nothing happens and when i try to update applications separately i have the same problem .
im signed in using the new id
the old one is my wife's so i can't delete it
the problem happens when i update all or each application by its own
using ios 5.0.1 on a iphone 3gs
the applications are downloaded using both the new and old id's
any help will be greatly appreciatedِ

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another.

If i update my iPhone 4S to latest version will the contacts gets erased?

If i update my iPhone 4S to latest version will the contacts gets erased? I have not taken back-up of the contacts!
I dont have an Outlook to take back-up. Is there any other means to back-up?

Hi there,
While the iOS updates aren't designed to erase your information, it is always a good idea to back up your information just in case the process doesn't go too smoothly. Take a look at the article below for information on how to back up your device to iTunes as well as some information on what gets backed up. I've also included an article that goes over how to update your device once you do have it backed up.
iOS: How to back up
http://support.apple.com/kb/ht1766
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
Hope that helps,
Griff W.

How will the system handle delta in the below scenario

How will the system handle delta in the below scenario
Day 1
DS--->DSO
PSA
Document Number| Customer | sales value
1001| RAMLAL | 10000
Your change log for DSO will read
Req1| 1001|RAMLAL|10000|N
DSO(overwrite)
1001|RAMLAL|10000|
Day 1
DSO--->Cube
Req1| 1001|RAMLAL|10000|
Day2
DS--->DSO
PSA
Document Number| Customer | sales value
1001| RAMLAL | 30000
Your change log for DSO will read
Req2 | 1001 | RAMLAL | -10000 | X
Req2 | 1001 | RAMLAL | 30000
DSO(Overwrite)
1001 | RAMLAL | 30000
Day 2
DSO--->Cube
Req1|1001|RAMLAL|10000|
Req2|1001|RAMLAL|20000|
Please explain with example
Scenario 1: Req1 & Req2 are deleted ONLY from change log on Day 3
On Day 4:
DS--->DSO
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000|C
What will happen to the Sales Value in the cube?
What will happen to the Req1&Req2 in the cube?
Thanks
Tanya

Tanya,
Please explain with example
Scenario 1: Req1 & Req2 are deleted ONLY from change log on Day 3
On Day 4:
DS--->DSO
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000|C
What will happen to the Sales Value in the cube?
What will happen to the Req1&Req2 in the cube?
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 10000 |C
--> Here 1000 is not correct value, as 1000 is change to 3000. It should be 3000. record should be as below.
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 30000 |C
--> As this data related to sales, and i hope you are using standard ABR extractors(Business Content).
ABR datasources delivers before and after images.
Before image:
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | -3000 |C
Before image:
Document Number| Customer | sales value|STOR_NO(ROCANCEL)
1001| RAMLAL | 0 |C --> value changed from 3000 to Zero.
If you are loading in additive or Overwrite into an ODS total sales for 1001 at end of day 4 will be Zero.
Hope it helps
Srini

How will you send SMS by using any java technology

how will you send SMS by using any java technology

Wikipedia has an entry on that protocol...
http://en.wikipedia.org/wiki/SMPP
Written by a 12 year old and edited by a H.S. student with a C+ average (or vice versa), so you know it's accuracy has been verified and you can trust your career on it!
OK, I don't know that is true and you probably guessed it, but I'm not a big fan of the Wikipedia concept, but that doesn't matter as long as you understand that the information contained within Wikipedia is not vetted in any traditional way. And yes, I do use Wikipedia occasionally as a resource but I do it knowing that accuracy of the information is always in question.
Probably doesn't need discussing in this forum, but if you are curious, there was on interesting discussion about Wikipedia here:
http://online.wsj.com/public/article/SB115756239753455284-zM_NmQpDWtRRSoHcPYcbQ6iq4H4_20061011.html?mod=tff_main_tff_top

How will the applications gets translated using Globalization

Similar Messages

Maybe you are looking for