How Win 7 automatic updates corrupts user accounts and crashes Illustrator CS5

A resolution or prevention is needed to prevent reoccurance a of new Illustrator CS5 crash: The crash apparently prevents Illustrator from reading the AGM.dll located in the Support folder when trying to open any file with Illustrator. Profounfly, reinstallation of the entire CS5, nor of just Illustrator 5, nor of just 5.1 does not correct the problem. A new user account has to be created, whcih of course requires copying all user files to the new user account if you do not want to have to log in under a different user account just to use Illustrator. David
[ edited by forum host - email address removed ]

Thank you, I have returned to that update setting. Knowing I am unable to determine from the update details that it is going to cause an unexpected error, I should be able to narrow down which set of updates are involved.

Similar Messages

Can I filter out a corrupted user account and app as part of a migration?

I am in the process of upgrading from Tiger to Leopard. I did an erase and install because of some issues with the old system, one being a corrupted user account. I am reluctant to use Migration Assistant because I don't want to bring that corrupted account over.
I have read in some other posts that if you already have a user account with a certain name in Leopard and you try to bring over one with the same same from Tiger, it will not transfer. Is this correct? If that is so I would create a user account in Leopard with the same name as the corrupted account in Tiger and that would block it, right? The next question is what constitutes the user account name, is it the designated name, often the computer name or is it the short name, often the same as the designated name but run together if it is two words. I guess I could just duplicate both names the way they appear in Tiger. Will that do it?
On a related note, is there any substantial difference between doing a simple upgrade on the one hand as opposed to an erase and install and then using migration assistant to bring everything over that way? I have a QT issue and along with the corrupted user account, I made the decision to use the erase and install option and essentially start from scratch. This, however, creates a lot of extra and perhaps unnecessary work. Would it help if I just deleted QT in Tiger so it couldn't be migrated?

There is a Mac OS X 10.5 help topic that answers most of your questions. Unfortunately, it doesn't seem to be available online & obviously, you can't access it on your own Mac without Leopard already being installed -- a bit of a Catch-22!
Anyway, below I have copied the text of that topic from my own Help Viewer. It lacks the formatting of the original, but I hope it will be of some use to you anyway.
*Using Migration Assistant to transfer files from another Mac*
If you need to transfer your files and important settings from an older Mac to a new one, and both computers use Mac OS X, you can use Migration Assistant.
Before using Migration Assistant, make sure you have a FireWire cable to connect the two computers.
NOTICE: If you experienced problems while using some files or applications on your old computer, you may not want to transfer those files and applications to your new computer. If you do, you may transfer corrupted data or incompatible files.
To transfer files using Migration Assistant:
1 On your new computer, open Migration Assistant, located in the Utilities folder in your Applications folder. Read the Introduction screen, and then click Continue.
2 If a dialog appears, type your password, and then click OK.
3 In the Migration Method screen, select “From another Mac,” and then click Continue.
4 Connect a FireWire cable from your new Mac to your older Mac, and then click Continue.
5 Follow the instructions in Migration Assistant to restart your older Mac and select the hard disk and user accounts from which you want to transfer. Then, select whether you want to transfer applications, files and folders, or your Library folder.
NOTE: When you first open a transferred application on your new computer, you may need to reenter the application’s serial number or registration code.
6 Select whether you want to use your old network, time zone, and sharing settings, and then click Transfer.
When Migration Assistant is finished, click Quit.
You can use Migration Assistant with a MacBook Air if both computers are connected to the same Ethernet or wireless network. See “MacBook Air: How to use Migration Assistant” at the Apple support website.

Just got a mac air and started using it. after getting it set up i migrated files from my old pc. i did not realize that the files migrated to a different user account. how do i delete this user account and not lose the migrated files which i need

I just got a mac air and set it up and started using. after getting famiiar with it i migrated my files from my old pc. i did not realise that the files migrated to a new user account. how do i delete this user account but not lose the migrated files?

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

How to delete user accounts and free up space on my macbook air?

How can I delete a user account and free up space on my macbook air ridding of all their details/info/app/software?

Go into system preferences and click on users & groups click the lock icon to unlock it, then select the user click the minus sign.

User Account and Location

How do I determine the user account and location so that I can track user changes?

Are you asking how to audit changes to the database?
Are users logging in to Oracle with distinct Oracle accounts? Or are they connecting with a shared Oracle account?
What do you mean by "user location"? IP address? Host name?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How can I find the user that created a user account and the user who last updated the account

How can I find out who created a user account and who last updated the account. I think that this is the same information that is displayed in the description field on the General tab.
I am using ADO commands and vbscript
ug3j

I should point out that there are two attributes of all AD objects that can help you track down the correct information in the system logs. These are the whenCreated and whenChanged attributes. This will tell when the object was created and when it was last
modified, which should help when you search the logs. Also, while whenCreated is replicated to all DC's, so they will all have the exact same creation time, the whenChanged attribute is technically not replicated. The date/time on each DC reflects when
the last modification was replicated to that DC. The values will differ slightly on each DC, reflecting how long it took for the change to replicate.
Richard Mueller - MVP Directory Services

Problem with Photoshop and Corrupt User Account

This morning when I attempted to save a document I was working on in Photoshop CS3, the application suddenly crashed. Since then, I have not been able to reopen Photoshop without it quitting unexpectedly within seconds of launch. Never had this happen before. I tried rebooting, resetting the PRAM, fixing disk permissions, repairing the disk, rebuilding the directory with DiskWarrior, trashing Photoshop's preference files and reinstalling the program with no change. None of the other apps on my computer seem affected, only Photoshop.
What did make a difference was creating a new user account. While logged in to the new account, Photoshop launches fine and I can work in it with no problem. I also have a Carbon Copy Cloner backup of my boot drive (which I've failed to keep up to date - it's a few months old) and Photoshop works fine from there (if I boot from the clone).
So it seems that my primary user account has become corrupted. What I'm wondering is if (1), I can "repair" my old User Account or (2), if I should move all my user files to the new User Account (and the best way to do that) or (3), if I should try and update the clone of my hard drive without transferring any of the User Account or possible OS corruption to it and then wipe my primary drive clean (after I've tested the clone) and reclone the clone back to the primary.
Thanks for reading.

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

How to use the admin user account in reports and dashboards?

Hi Everyone,
I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
Hyperion 11.1.1.1
Thanks
Syantan

This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
Cheers
John
http://john-goodwin.blogspot.com/

HT4796 I used migration to transfer iTunes from pc to mac book. It had me set up another user account. Now i have 2 user accounts and i have the iTunes on the wrong one. How do i get the iTunes on the original account.

I used migration to transfer iTunes from pc to mac book. It had me set up another user account. Now i have 2 user accounts and i have the iTunes on the wrong one. How do i get the iTunes on the original account.

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

I have one imac. my wife and i each have our own user accounts and itunes library. How do we share selected music between user accounts?

i have one imac. my wife and i each have our own user accounts and itunes library. How do we share selected music between user accounts?

To give other users read-only access to your library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
If you want to give full read/write access to more than one user, see the support article linked below.
iTunes: How to share music between different accounts on a single computer

How to stop the removing a user account and saving the home directory to a disk image?

I tried to delete one of two administers on my iMac (10.10.1). After more than 12 hours it will not let me quit System Preferences for it "is removing a user account and saving the home directory to a disk image". How do I finish deleting the administer and quit System Preferences?

I would recommend asking them in C# forums: https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral&filter=alltypes&sort=lastpostdesc
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to automatically update products and product categories?

Hi friends
How to automatically update products and product categories.Is it possible?
regards
venkat

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
Also refer the foll thread:
Material group from R/3 to COMM_CATEGORY (SRM)
Related notes : OSS notes 872819 and 720819.
BR,
Disha.
DO reward points for helpful answers.

I downloaded xcode 4 from my brother user account, and I want to move that file to my user account ( how can I do it please help)

Hi everyone can anybody help please, I downloaded xcode 4 from my brother user account, and I want to move that file ( which is xcode 4) to my own user account, I was trying to find how to do it, but unfortunatally couln't do it, so please need world help,

You cannot. You have to make your own download by signing into the App Store using your Apple ID then downloading the file.
If you just want to install it on your computer, then copy the file to a flash drive and transfer it to your computer.

My login widow shows both user account and system administrator account . how do i not show the root account on my MBP i have upgraded to mountain lion

my log in window shows btoh my user account and the system administrator (root) acount. how do i not show the system accout on the log in window?

I think you need to disable the root user assuming you have it enabled.
Navigate thus;
/Applications/Utilities/Directory Utility
...and then.....
Edit>Disable Root User

After power down and a cold restart, I automatically restart in my Administrator Account. Running 10.8.4 with one Administrator account, one user account and one guest account. Recently downloaded and installed 3rd party software (Panorama).

After power down and a cold restart, I automatically restart in my Administrator Account. Running 10.8.4 with one Administrator account, one user account and one guest account. Recently downloaded and installed 3rd party software (Panorama). Installation required that I create a super user named Other with root privileges. I did so and successfully installed the 3rd party software. I powered down a few days late and when I restarted, I went automatically to my Administrator account with no login password required. I deleted the Other account, powered down and restarted with the same result - opened in Administrator. I then followed the steps to disable root user, powered down, cold restart - same result, opened in Administrator account.
Any suggestions? Any thoughts? Much appreciate any help you might offer.
jtsinphl

Welcome to Apple Support Communities
Disable automatic login. Open System Preferences > Users and Groups > Login Options, press the padlock at the bottom left corner, and select "Off" next to "Automatic login"

How Win 7 automatic updates corrupts user accounts and crashes Illustrator CS5

Similar Messages

Maybe you are looking for