How work Tone Measurements instrument?

Hi.
Could you say me how works Tone Measurement tool in LabView 8.5.1? I need this information for my diploma thesis. It use FFT or Fourier transformation?
Thank you!
Solved!
Go to Solution.

Although the Express vi help is vague (Its meant for beginners so it discusses functions at high level) If you convert the express vi to a sub-vi you can open its heirarchy (see picture above)
Exploring the heirarchy with Help on yields answers and more detailed explainations of the underlying functions. A FFT is used to compute the tone information.
Jeff

Similar Messages

How do I get Vienna Instruments (VI's) into a Logic Project?

so, I'm running an IMax OS X 10.6.7, with Logic Pro 9.1.4
I recently downloaded Vienna Symphonic Library Special Edition and Special Edition plus, the latest version. Everything is now downloaded and ready to go, and I have started messing around with patches, saving matrices, etc. on the standalone Vienna Software.
So my question is, how do I import the VI's into a Logic Project? I have read the Logic Manual, and it doesn't provide detailed instructions on how to do this. When I look at the Allowable VI plug ins in Logic, it shows the vienna instruments there, but I just don't know how exactly to go from having the matrices saved in my custom folder, using them with the standalone vienna player to actually using them within a Logic Project to create midi regions/tracks, and turn old midid regions/tracks that were created with Logic instruments in to tracks/regions with the Vienna Virtual Instruments.
Help?

Yes, I know how to run a software instrument. I actually figured out how to do this on my own, and am assuming that it is the best way. I just loaded any software "Logic" instrument, and then loaded the Vienna matrix into a plug in slot.
So that seems to work, but now I have more questions. Do you use Vienna?
If I already have a violin region recorded on a Logic instrument track, I have realized that i can just copy and past it onto the new track with the Vienna plug in and it will adopt those settings, but my question is this:
Vienna seems to make a big deal out of being able to play all the articulations of one instrument on just one track, with keyswitch controls, etc. But if I'm working with Midi data on a track in logic and I'm not performing all the parts "live" while recording, how do I get the articulation changes to stay in place, so that I can have a violin play staccato, legato, and pizzicato all in one track, without having to manually hit the keyswitches to change the articulations while the track is playing? obviously I can't do this while bouncing, or with multiple tracks at once, so how to you create a single track with multiple articulations in Vienna, plug it into a Logic Track, and have it playback with the changes in articulations, without having to manually change it.
Any ideas?
I have a lot of multi track orchestral projects composed using logic instruments, but I want to get all those over to Vienna Instruments as well. What would be the easiest way to do this, with consideration to my above question concerning one track for multiple articulations of an instrument?

In Logic Pro 9, how many midi controlled software instruments do you get...?

In Logic Pro 9, how many midi controlled software instruments do you get and is there possibility to download more as it says 40 on the programs info on the Mac Store, as i intend to compose on it but with only 40 instruments it's not really worth it.
So i was just wondering whether it let you download more for free.
Thanks for reading
~Matt

Yes: I too am interested in the software instruments available in Logic Pro: one has to be a bit wary of the jam packs because there don't seem to be many solo instruments included. But I looked at the Logic screen in an Apple store the other day, and it worked like GarageBand in
this respect: you created a new track choosing the software instrument option and a whole lot of instruments came
up in a column on the right: lots of solo wind instruments, plenty of keyboards and guitars of course and not very many solo strings, only one violin, in the world music subsection under Irish fiddle. Yehudi Menuhin
where are you when we need you?
What I've been trying to find out is which part of the purchase does this long list of software instruments arrive with, because it's basically the only reason
I'm interested - I get on fine with gb but it
Just hasn't got enough instruments, and as I say the jam packs don't seem
to resolve this ? Or do they? Could someone please help
me with this?

How to tell how much toner in hPlaserjet CP1525nw

how to tell how much toner in hP laserjet CP1525nw

Hello lwwpbw, and welcome to the HP Forums, I hope you enjoy your experience!
I saw from your post that you are looking to find the levels of toner within your printer. I'd love to help with that today!
I have a document I would suggest using, containing the steps to check your toner levels: HP LaserJet Printers - Checking Toner Levels.
This document may also be helpful to you: HP LaserJet Pro CP1525n and CP1525nw Color Printers - Managing Print Cartridges.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

WIth LabVIEW how do I control an instrument with a RS232 output, using a RS232 to USB converter cable.

WIth LabVIEW how do I control an instrument with a RS232 output, using a RS232 to USB converter cable since I dont have rs232 ports. I have two instruments that I want to control in this manner. One is an Imada ZPS force gage with RS232 output. The other is a Panasonic HL-G103-S-J laser micrometer sensor which is RS422. I've done considerable LabVIEW programming using GPIB but I have no experience with devices like these. Any tutorial or examples would be greatly appreciated.
Thanks.
Solved!
Go to Solution.

I understand that you want to control a device which having RS 232 port as output. If so, you can use an USB-RS232 cable from PC to device and you can control or monitor the device.
See this link http://zone.ni.com/devzone/cda/epd/p/id/2669
Also, first check the device in hyperterminal and then continue to program in labVIEW. You can find the serial VI's in Instrument I/O.

How do I set an instrument to hold volume in ES2

This seems like a ridiculously easy question, and perhaps I have lost my mind, but how do I change an instrument whose volume dissapates while I am holding the key down to one that holds its volume. I thought this was Decay, but the setting seem to have no effect on the instrument and perhaps some other setting is preventing it. I've compared settings to instruments that hold their volume with the key down and cannot find the variation in settings.

Hi
You need to adjust the Sustain Level of Env3 in the ES2
CCT

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

Hi
frodojon wrote:
I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
frodojon wrote:
Everything appears to be scaled from -63 to +64 if that's what you mean by scaling? What do you mean by MIDI CC7?
Mainstage works with MIDI CC's generally in a number of ways:
Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
This mapping can be done basically two ways (with MS 2.2):
a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
frodojon wrote:
something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel. I
Yes.
It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
hth
CCT

How work a buffer?

Hi,
I work on a buffer. I want to acquire an .avi in an buffer of ten seconds. For example, all images acquired by the camera come in a buffer
9[1][X][X][X][X][X][X][X][X][X] -> [2][1][X][X][X][X][X][X][X][X] etc... [1][2][3][4][5][6][7][8][9][10] and after [11][1][2][3][4][5][6][7][8][9] and when I push on capture it copy only the ten last seconds. I think that is a ring buffer.I do two .vi but I don't understand how works the buffers.
Attachments:
Essaione.vi ‏22 KB
Buffer.vi ‏52 KB

wow .. too many questions in one post
you need to learn BASIC ABAP to be precise..
1. Internal table are like array of structure...(hope u can relate it to other coding language now) and workarea is just one structure.. so a work area is used to hold single line of a internal table of same format..
2. text - integer.. integer to text... => YES.. just define a variable as type STRING. and do what ever operation you want on this.
3. use ROUND for rounding off..
4. Please NO MORE TOO MANY QUESTION on ONE thread... Thanks
-Somu.

How Work tx SARA

Hi Gurus
Somebody can explain me how work tx SARA ??
I am working with object 'FI_DOCUMNT' and i have created a variant, in this variant I have defined some attributes such as selection variable and the name, in those fields I am not using the standar SAP.
I found a program Z for define posible values in all fields in the variant, this program is used for put some information in the table TVARVC but i dont understand how can i determine which fields i am going put a possible value??
I do not understand which is the relation between tx SARA , Variable selection and the program Z for put some information in the variant of ejecution , somebody have worked with this it
Thanks
Gregory

ready

How work this Blend Mode Mathematically ?

hi,
i need to know how work this Blend Mode :
Layer, Overlay, Hard light, Add, Subtract, Difference,
Invert, Alpha & Erase . Mathematically ?
Regards
Crimson

AlMostabed wrote:
> this like help u :
>
http://dunnbypaul.net/blends
>
> one more question mid-grey in RGB is (128 , 128 , 128 ).
how i know
> if the base color less or greater than mid-grey ??
>
> i know DARKER than mid grey will be less than 128 &
LIGHTER than mid
> grey will be higher than 128 but in each channels or
what ?
>
> ok, ( 129 , 239 , 129 ) is lighter than mid grey and (
127 , 101 ,
> 123 ) is darker than med grey . right ? and ( 235 , 128
, 107 ) is
> darker or lighter then mid gray ??
You need the L component of the HSL representation of your
colour.
http://en.wikipedia.org/wiki/HSL_color_space
L=0.5*(Math.min(Math.min(r, g), b)+Math.max(Math.max(r, g),
b))
where r, g, and b are the components of the colour.
Andrew

How work the decompiler flash?

i wnat to know how work the decompiler flash..
thank nissan.

Hello & welcome Iotu!
http://www.tech-recipes.com/rx/4836/os-x-how-to-burn-a-multisession-cd-or-dvd/
http://myrightbrain.wordpress.com/2006/08/12/how-to-do-multisession-burns-with-m ac-os-x/

How work forum here?

Hi, I want ask how work forum here. When I will ask for anything, who answer me? And what is "Duke Dollars". Must I have any duke dollars for any answer???

Hi, I want ask how work forum here. When I will ask
for anything, who answer me? anyone who is around at that time, and feels he/she has something to say regarding your question.
However, before starting to fire awy questions, it is adviseable to search the forum first to see if your question hasn't been answered on a previous thread!
And what is "Duke
Dollars". Must I have any duke dollars for any
answer??? Duke Dollars are said to encourage people to answer your questions. I am not sure whether assigning Duke Dollars to your post has any effect at all, but if you assign Duke Dollars to your question, make sure you award them... (if your question is answered:-))

Sustain pedal not working with some es2 instruments

the sustain pedal works with some es2 instruments and not others. is there a filter setting where it can be turned on and off?
thank you

Some instruments never had sustain pedals, Organs, Clavinet...etc
Which ones aren't working.

How working days is treated and counted as leave day.

Q. What is working Days & How working days is treated and counted as leave day.
Case 1-suppose Absence is registered on 15.11.2010- 18.112010.but on 17.11.2010 is a public holiday.in as IT2001 it is showing as Absence hrs =24 days,Abs days = 3 days and Cal days = 4 days .Quota used= 4.
why it is not showing 32 hrs .
Thanks

The counting rule for absences takes care if the public holiday or non working days as to be counted when absence is entered or not.
If you tick on (not a public holiday) then only days which are not public holidays wll be counted in absence counting. If you dont check saturday sunday in the rule then sat sunday will be counted towards leave...Other options are also there for eg. Holiday classes. You can make appropriate settings and include or exclude the working/non working days from absence counting.

How works final cut studio with lion?

how works final cut studio with lion?

The thing to take from FCPX is that it isn't an update/upgrade from 7. It's an entirely new editor. As a professional video editor myself for 5 years, I felt just as hesitant as you when I first saw what Apple had done. However, I committed myself to biting the bullet for a little while to get comfortable with the new workflow, and I can vouch for Apple's new move toward this type of setup. It has improved my workflow enough to where I can confidently say I deliver projects, on average, in half the time, with no sacrifice to quality.
Give it another chance, if you can afford it. With a bit of training, and time into using it, you'll see it's a superior editor to FCP 7

How work Tone Measuremen​ts instrument​?

Similar Messages

Maybe you are looking for

How work Tone Measurements instrument?