How work WCS AP Templates

Hello together
I want to make a change on a set of accesspoints which are in a specific building. I know I have the AP Templates function in my WCS 7.0. What I don't understand, let's assume I want to change the priority of the controllers (primary, secondary, tetriatary) on those APs, but no other settings.
Am I right to simply mark the 'controller' option, select the three controllers, switch to the 'Select APs' tab, select those of the specific building and then hit apply on the 'Apply/Schedule' tab?
What I am unsure of now, would that only change this single setting, or would it also change any previously manual configured setting back to it's defaults?
Thanks,
Pato

you're right, WCS changes only the items that are checked.

Similar Messages

How do you save work in a template without changing template

Using pages;How do you save work in a template without changing template?

When you open a template it is a copy of the template you get. You can write, add, delete or change what ever you like. It will not change anything in the template. When you save you have a document, not the template.

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Crop a background image (movie) - working with a template

I'm working with the template "Promo > Product Shot". The image block with the bike is what I want to replace with my own video clip.
I can't figure out how to replace it, so I took the video clip and "placed" it. That's all fine, but now I want the size of the video clip to match the size of the bike block. I can scale it down to get close but then I'd have to crop the sides to get the vertical block shape.
Can't figure out how to do this either. Is it even possible?
Thank you very much,
Eric P

Thank you for the speedy reply.
I played with that tab a little but didn't understand exactly what it was so I never followed through with it.
I did follow your steps, but nothing happened. Perhaps there is something I have to do after selecting the movie?
Thank you,
Eric

How to change PowerPoint Template across multiple site collections

I am failry new to SharePoint, and my organization has asked me to research how to change a PowerPoint template that is stored on multiple site collections. There are current PowerPoints based on the template and they wanted to be sure those wouldn't be
affected, as well. They want a "quick and easy" way to update the template that the divisions in the company use without manually going into each site collection. A co-worker said she hopes to "replace the current...template at the site
collection and it will modify the available content type when selecting new document."
Any help on how to handle this would be appreciated.

This will really depend how the template has been packaged. If it's a content type, than editing this and making sure that the "update content type" radio is selected will do the trick. Can you ask someone who's made one to show you how they generate
the template. If it's within the New --> XXX Document, than you're in luck
If they're just deployed as normal files within a library, you'll have a much harder time.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to make the templates in PAL to 1920 x 1080 ?

Hi there,
I did FILE > OPEN TEMPLATE.
When I was doing projects in Std Def, I select PAL, and there were a lot of templates available in PAL.
But now doing projects in HD, these templates in PAL are too small to superimpose onto the HD videos (in 1920 x 1080).
How to make these templates in 1920 x 1080 ?
Thank you

Ian R. Brown wrote:
I think you are making a big issue of something very simple as it took me less than a minute to test it out.
Make your template or whatever in LT and then select File>Render Movie and make sure that the "Render Background" box is ticked.
Put resulting file in FCE and stretch it as I described earlier.
That's it!
If you don't want your text stretching, you can leave it off the LT movie and add it from FCE's Text functions . . . . . or you could make just the text in LT and add it on a track above the template in FCE.
You need to do some quick experiments (tests) to see how it works for you.
Incidentally, are these third party templates?
If so, you should contact the supplier to see if they have included some HD versions somewhere.
Thanks Ian,
The reason I am asking is bcos I cannot experiment with it as I am not at home. I don't have a Mac with me.
I was hoping that FCE can import as ipr so that I do not have to render each time I make changes.
These templates are extension packs from 12 inch. Dont think they have HD version
Cheers

How to unreleased Appraisal templates which are alreay being in used

Hi Experts,
I am looking for the solution how to unreleased appraisal templates which are already released and also used by the Employees for their PDD process.
We are facing one problem in PDD templates, so we want to make some changes in already released templates.
Is there any way or solution by any Functional method/settings or by ABAP program?
Please reply as it is very critical and important for us to solve ASAP.
Thanks & Regards,
Ashish Mehta.

Now that might work (actually it will work). But you need to be 100% sure that your changes will not infleunce the appraisal process. Because it is not that hard to cause unrepairable data inconsistencies on already existing appraisal documents!!
There is a very good reason for not being able to unrelease templates once they are in use!
One is that you can create incorrect appraisal documents from a business point of view.
Say your document end appraisal is a 1-10 scale, one being the worst. The appraisal gets a 3 as final score, meaning in this scale quite bad. Now you unrelease the template and change the used scale to a 1-4 scale. Your very bad employee turns all of a sudden in a quite good employee!
Even worse, <b>you can create database inconsistencies on document level</b>. Just remove elements or columns from the template and you will get very strange results after releasing again.
I don't recommend changing templates once documents are based on them but if you use this option then be carefull!
Regards and Groetjes,
Maurice

How to add custom Template transaction types ( for Quote ) ?

How to add custom template in transaction types?
Note : I have gone through below note. But not getting appropriate solution for this.
982142.1 (OM Sales Order Template Not Available In Layout Template LOV For Print&Preview)
444687.1 (OM Quote Template Not Available In Layout Template LOV for Print And Preview)
Thanks in advance..
Sameer

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

How to tell what template is applied to a Framemaker file?

I'm new to Framemaker...so please excuse if this is a silly question.
We are trying to figure out how to tell what template has been applied to a Framemaker file. We are using the structured view in Framemaker 7.2.
Perhaps I am thinking too much like a Microsoft Word user -- in which case I can look at what template has been applied to a document.
Does Framemaker work the same way -- or are templates associated with Framemaker files in some other way?
Thank you --
J-Ha

J-Ha,
FrameMaker works differently. Strictly speaking, there is no way to tell which template was used last. A FrameMaker template is just a FrameMaker document which you call "template". Using File > Import > Formats you can import all or selected formats from one document to another. The main benefit: Each document is completely self-contained and does not require any other document.
Many solutions I know of include a user variable named something like "template-version" into their template document or put the version information on one of the reference pages. When importing user variables or reference pages, this can tell you version imported last.
- Michael

How to migrate rtf Templates in XML Publisher ?

Hi All,
I want the script so that i can download and upload the RTF files directly from my development instance to my production instance.
For this i have come across 3 links
How to migrate rtf Templates in XML Publisher?
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120xdoig.pdf
unable to migrate physical files using XDO Loader utility
and from here i am running this command from /home/aryan directory
java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD fnd -JDBC_CONNECTION sharp.apps.com:1522:tst1 -LOB_TYPE TEMPLATE -APPS_SHORT_NAME CUSTOM -LOB_CODE ZEMP -LANGUAGE en -TERRITORY US
but it is giving me error "ksh: java: not found". could anyone can tell me how and from where i have to run the download and upload command
Thanks
Aryan

Hi Hussein,
I tried with applmgr also and still for java -version it is giving me error ksh Java not found
and for which java it is giving me error no java found in different directories path.
Thanks
Aryan

How to create matrix template help pls

hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
Rajesh

This issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks

How to get title templates library for CC?

How to get title templates library for CC? Do you have to download and install PP 6 to get them?

Try here Library, title templates, template projects missing: Premiere Pro, After Effects, Encore

How to setup a template to issue SHA1 certs if I have a SHA256 chain

Hi All
Can any one tell me how to setup a template to issue SHA1 certs if I have a SHA256 chain. I looked at the templates and I didn’t see where it is specified?
Puneet Singh

Certificate signature algorithm is CA-wide settings and independent from certificate templates. You have to configure your CA to use SHA1 signature:
certutil -setreg ca\csp\cnghashalgorithm sha1
net stop certsvc && net start certsvc
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

How do you delete templates in Pages?

How do you delete templates in Pages?

Hi Lilly,
If you mean "My Templates" they are in a hidden folder.
In Finder, open the Go menu and hold down the option key (alt) in order to see the user library folder.
Open the library folder and navigate to:
Library/Application Support/iWork/Pages/Templates/My Templates.
Select a template then drag it to the Trash (or command-delete).
Having gone to all that trouble to find that hidden folder, single click to select My Templates folder, then
Menu > File > Make Alias
An Alias folder appears. Rename it to something such as "My Templates Pages alias" then drag it out of My Templates folder to somewhere convenient (maybe the Desktop will do for now).
You can now close all those folders that you navigated through because the Alias (double click on it) is a quick way to go there again.
Repeat this process for other iWork apps such as Numbers.
Another way to manage your templates is to open one, make changes, then Save As Template with the original name of that template. The new template will replace the old one.
Regards,
Ian.

How to make a template in Photoshop CS5?

How to make a template in Photoshop CS5?

That would probably depend on what you mean exactly.
A template for what, which structure, …?

How work WCS AP Templates

Similar Messages

Maybe you are looking for