How works lync when I made a video conferences with someone in my same building?I want to understand how lyncs works, when I made video conferences with someone in my same building, if my call go to to server and then go to the person I´m calling. Or if L
I want to understand how lyncs works, when I made video conferences with someone in my same building, if my call go to to server and then go to the person I´m calling.
Or if Lync realizes that we are in the same building so it never leaves, so it don’t generate traffic. My concern is the bandwidth consumption.
Please a I need the information.
thanks
In addition, you can refer to the following link about the media connection in different scenarios:
http://www.shudnow.net/2010/12/06/lync-server-2010-port-ranges-and-audiomedia-negotiation/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support
Similar Messages
-
Hey I got my phone stolen yesterday, but it was dead for 24 hours before i checked find my phone so it says offline. I called verizon suspended my service and they said if the person tried to sell it back, or put their number on it, it will get flagged. I was just wondering if i should reinstate my service and try and wait for it to turn back on and then go get it because you need internet for it to track and with the suspended service, it can only track if connected to wifi, but they wont get past my password.
Where exactly did you buy the "new iPhone "
A country might help as well .This is a WW forum
Are Direct Mobiles an Approved Apple iPhone reseller if not it may well be a fake -
Just tried to place a call with my new iPhone. I can hear the person I'm calling but they cannot hear me. There is a line across the microphone icon, which I took to mean muted but nothing changes when I tap it. What am I doing - or not doing?
is your mute switch turned on (above the volume) ? remove case and screen protecter.
is volume turned up?
if so do this
account security
Please call apple @ 1-800-692-7753 in USA
ask for the account security team
you may want to add a credit card to your iTunes account before calling; so they will have a way to verify your identity.
Peace, Clyde
check # for your country
http://support.apple.com/kb/HE57
<Edited by Host> -
Very recently, my computer stopped opening quicktime when I click on a video clip in iphoto. I have quicktime X, and it still works to play videos if I open quicktime and then search for the video. How do I go back to quicktime automatically launching from iphoto?
Well since I do not have iPhoto 7 I can only guess what may be: As far I can remember up to iPhoto 8, iPhoto insisted on Quick Time Player 7. As I can see you have Snow Leopard (Mac OS X 10.6) and there Quick Time X is the standard playaer. Basically Quick Time 7 is not part of Snow Leopard.
Can you please check if Quick Time 7 is installed under Applications->Utilitis (in 10.6 Quick Time 7 if presenet is installed not under Applications - there Quick Time X is - but under Application/Utilities).
If not: insert your Snow Leopard installation DVD.
Once the installer opens, double-click on the Optional Installs folder
Double-click the Optional Installs.mpkg package
Click continue.
Select the option for QuickTime 7 then click Continue to start the installation.
If it is there you may try to move the iPhoto prefernce file to another folder and let iPhoto create a new one.
Please keep the old file until you are sure that iPhoto works how it should.
The iPhoto preference file can be found under your home folder then Library then Preferences and there
com.apple.iPhoto.plist
As alraedy mentioned do not delet this file, since if something goes wrong you can put it back. -
I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!
Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable. -
I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not connect to the IPod software server". I found the apple webpage that is supposed to help me, but when i went to the LAN settings in the control panel i found that 'Automatically detect settings" was already checked. I do not know what to do, Please help.
If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"
Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz -
How do I remove my caller id from my samsung convoy phone so that the person I call does not see my name?
MojaveMoon's solution will work if there is only one person you want to block your ID from; if you want to block your caller ID from everyone, you can go to your account online, go to Change Features, and scroll down till you see Caller ID block. Instructions say that once this is activated, you can dial *82 before any # you WANT to display your number to, but all others will be blocked.
If you are on a Family share plan, the account owner needs to log in and choose your line to activate this feature. -
How to fix when a song stops in the middle and then goes to the next song
How do I fix this problem
I solved a similar issue, where some songs in my itunes library would play to some random point and then skip to the next song. It started when I replaced my computer, so I copied over my library to my new computer and went through installing and importing on my new machine. When I noticed this behavior for random songs, here's what I found.
The affected files were .m4p files I'd purchased from the itunes store. This had nothing to do with activating them with my Apple account, which I did. The easiest way I found to identify the affected files was to view all your music in itunes, right click on any of the column headers, and select 'kind' so that column shows. Then order your music by the 'kind' column, and scroll down until you reach the songs where kind = 'Protected AAC audio file' (not to be confused with Purchased AAC audio file, which were unaffected in my case). Highlight just those 'Protected AAC audio file' songs, copy them, and paste them in some temporary directory. Back in itunes, now delete these hightlighted songs (I chose to keep the files rather than permanently delete them, but I think either would work).
Before adding these songs back to your library, if you want them pulled into your library directory rather than left in temp, make sure in Edit > Preferences > Advanced > check off Copy files to itunes media folder when adding to library.
Then in itunes, click File > Add file to library > browse to your temp directory > select all files > and click Open to add these files back to your library. After that, all my previously disfunctional files exhibited normal playback.
I hope you find this before you waste many hours on this like I did.
Good Luck, A. -
I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b
The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats. -
My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?
if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
like this the detector just is stuck in the opposite way
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
iphone stuck in headphone mode -
I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I want to understand how crypto works.
Hi, I want to understand how crypto works and all. where i can start with. i really dont know anything about crypto. i need to understand how DC and keys and algorithims work together and how they work. pls suggest me where and with what i can start.
Since you asked on the Java Cryptography forum, I would recommend beginning with this book:
Beginning Cryptography with Java
David Hook
ISBN: 978-0-7645-9633-9
http://www.wrox.com/WileyCDA/WroxTitle/productCd-0764596330.html -
I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.
It was the PRAM.
-
how can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it?
iPhone 5, iOS 7jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.
Maybe you are looking for
-
Can i use my TC as a NAS for both my mac and windows machines at home ??
im moving to my new place real soon and will have to set up my very own network. have set up the network before at my parents with no problems, as we were all using windows machines. with my new MBA, i am looking at 2 options: 1) get an indepedant wi
-
ORA-28545 Between ORACLE 10G and SQL SERVER 2008
Hi All, i'am doing heterogeneous connectivity as oracle 10G (Unbreakable linux4) to sql server (SQL SERVER 2008) The DSN and the connections works ok (FreeTDS and UniXODBC). I create the dblink create database link inforpyme connect to "sa"
-
How to see my mac os x version?
how can i see my mac os x lion version on mcbook pro?
-
I have a HP Touch Pad that I have not used for a couple months. While attempting to use it tonight I realized there was a pass code. I do not remember the pass code that I put on there. How can I bypass the code? Mackenzie
-
NetConnection.proxyType not works
Hi, I need a solution for this: when the port 1935 is closed, the NetConnection switch rtmpt (port 80). The NetConnection class built in function: proxyType="HTTP" not works or I use not rightly. In the FLVPlayback class works this function, but I do