How would I be able to tell if root was changed for remote hack ip tunnel

I apologize for lack of terminolgy but I'm trying to determine how I would tell if my computer was hacked remotely and a backdoor or tunnel has been created? I've read some articles on hacks that disguise themselves and change root things (sorry for terminology), but I'm not sure how to determine this. It's also came to my attention how eerily easy these things are to perform. Any help would be SOOOOO GREATLY appreciated. At the time my firewall was not enabled, sharing disabled but they would've had access to my home network IP and router password. Thanks.

The Apple warranty covers manufacturing-related defects. Are the cracks in your iPhone manufacturing related? Perhaps? During the R+D of the iPhone, thousands of devices are destroyed during testing. All of the failures are noted, photographed and cataloged. Service centers have access to this data, and can tell if something is related to manufacturing, and what happens when someone drops the iPhone. In any case, yours is a cautionary tale about "living with something that's broken", and "getting something repaired". Your story reads that you lived with multiple iPhone defects, and then returned it to be repaired after you dropped it...but dropping it did not cause any problem.

Similar Messages

In action script, how would I be able to capture animation on the stage and save it to a file

using action script how would I be able to capture video that's playing on the stage and save it as a file

Are you still using iphoto?
If so you should NOT move the iphoto library to the TC and use it.
Apple says you will corrupt the library doing this.
http://support.apple.com/kb/TS5168
Although mostly about FAT32 it adds network drives.
http://support.apple.com/kb/HT1198
Now what I cannot tell you is if the same rules apply to the new photo app. Apple might have fixed the problem.
For iphoto you should offload the photos to USB drive plugged into your computer.. or any external drive.. the faster the interface the better.
Apple have explicit instructions for moving the library.
iPhoto '11: Move your iPhoto library to a new location

How would I be able to pull up all of the text messages tat were in my phone over the course of 2 years and back them up to my computer since my phone has a broken screen and can no longer read the mesages.

How would I be able to pull up all of the text messages tat were in my phone over the course of 2 years and back them up to my computer since my phone has a broken screen and can no longer read the mesages.

If the messages are stored on the device and you can power the device up you can use the application posted at https://community.verizonwireless.com/thread/770529 , the application has a screen capture option and you can use the screen as a guide to install MyBackup from Market or a number of backup apps from Market and then you can run the applications and backup data to your SD Card to restore to the replacement device.

How would I be able to bring the GHz and memory up on an Air? How can I make it badass?

How would I be able to bring the GHz and memory up on an Air? How can I make it badass?

I should clarify a point ...
Macbook Air solders memory onto the motherboard. It cannot be upgraded.
Macbook Pro has memory slots that allow SODIMMs (the memory cards) to be replaced, up to the limit of the motherboard.
My 15 in MBP can upgrade to 16 GB. But 16 GB for my machine is still $600 at cheapest. I will be staying at 8 GB for a while.

How would I be able to take my credit card off iTunes

How would I be able to take off my credit card information

Hello Joemafnas_3,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
Changing your payment information using a computer
Open iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Choose Store > View Account.
Enter your account password and click View Account.
From the Apple Account Information page, click Edit to the right of Payment Type.
Note: You can find the payment methods that the iTunes Store accepts in the Payment Type section. If you don't want a payment method on your account, select None in the Payment Type section.
Click the Done button after you've updated all of your information.
Best of luck,
Mario

How would i be able to convert music files, like wma to mp3 on my mac

how would i be able to convert music files, like wma to mp3 on my mac

If the music was just purchased on the iPod from iTunes Store, then sync with iTunes. You will be prompted to transfer purchased items to iTunes. You can also re-download prior purchases directly in iTunes: Download past purchases.
Otherwise, you will need a third-party utility for the chore such as Pod To Mac or Pod To PC.

I forgot the answers to my security question, now I can't purchase things on iTunes. How would I be able to change that?

I forgot the answers to my security question, now I can't purchase things on iTunes. How would I be able to change that?

Click here for information. If you can't reset them through the methods described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
Without a rescue email address, you can't reset them yourself. Nobody on these boards can reset them for you.
(94283)

I lost my ipod touch at school. i used find my ipod on icloud but it keeps saying offline. when i try to imessage myself i says it cant deliver. is it possible someone hacked it and reset my ipod? and how would i be able to find it if thats the case?

i lost my ipod touch at school. i used find my ipod on icloud but it keeps saying offline. when i try to imessage myself i says it cant deliver. is it possible someone hacked it and reset my ipod? and how would i be able to find it if thats the case? PLEAES HELP !!!!!!!!!!!!!!!!!!

Anything is possible.
it could be off or not connected to wi-fi.
It could have been found and restored.
In any of these cases you will not be able to find it.

I lost my iphone and i would like to know how would i be able to back up the things that are on my phone with out me having the phone

I would like to know how would I be able to back up my phone with out me having the phone with me ?

sherrickia21 wrote:
I had my contacts and everything else back up
Then you can restore from that backup with the new iPhone.
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

How Would I Be Able To Copy This Type Of Intro ?

Hi Guys, Im Trying To Make an Intro For My Channel But Im Really New To AE. I'm Unbeatable - Pokemon Showdown Ladder Master Series #6 - YouTube This Person I Watch has An Intro And I Want To Learn How Would I Do This ? If you have any video tuts or step by step process on how it would be done ill really appreciate it.

Start here, it will take you about a half hour: Basic Workflow
Then carefully take a look at the intro. Everything that is moving is on a separate layer.
There is a background that does not move. The Background is darker at the top than the bottom so there could be a gradient just above the background layer with the blend mode set to multiply. There is a spinning starbrust that has blurred edges (Effects>Blur>Fast Blur for example) that is semi transparent and darker over the dark areas than it is over the light areas so this suggests an Overlay or Multiply blend mode here as well, then there is a logo that scales up and down (scale keyframes) and changes position slightly (position keyframes).
That is all there is to it. Very basic AE so start with the Basic tutorials I linked to, learn how to add layers and set keyframes then how to render, then build your artwork and practice setting keyframes.

I would like upgrade a 16-bit dll that was developed for 16-bit windows to a 32-bit dll

I have an 16-bit dll library that was used for talking to a DAQ through Labview version 4 for windows 3.1. I would like to upgrade it so that I can make these calls through Labview version 4.0.1(32-bit). Can anybody do it for me
Attachments:
Megadac.llb ‏361 KB
MEGADLL.DLL ‏240 KB
Driver_Files.zip ‏71 KB

"cincidude" wrote in message
news:[email protected]..
> I have an 16-bit dll library that was used for talking to a DAQ
> through Labview version 4 for windows 3.1. I would like to upgrade it
> so that I can make these calls through Labview version 4.0.1(32-bit).
> Can anybody do it for me
You are asking not much aren't you? I mean your DLL acesses directly the
speaker hardware
in the first function I looked at. Hardware access in 32 bit Windows DLLs is
a big NONO.
Then looking at the communication source I see that your device is
appearently a nice GPIB
device.
In my humble opinion reimplementing the whole piece in LabVIEW would be just
as hard as
porting it properly to Win32 as a DLL. It is certainly a lot of work
in any
case but that
requirement to develop the solution in LabVIEW 4.0 seems rather antiquated
to me.

How can a user enter data as many it was specified for??

I am writing a program that makes calculations on data entered by the user. First I ask the user how many inputs he/she wants. And my problem is how the user can enter as many input he/she asked for. How do I make the program ask for input more than once, before I do calculation on the entered data???
I am sorry if my english is hard to understand, but I hope this was understandable.

I think you should use a readInt() if you have such a method in your Keyboard class to ask for the numbers.
Then create a float array with that many elements, and use the for-loop you have shown:
for (...) {
numbers[ i-1 ] = Keyboard.readFloat(); // numbers is a float array
// if you let i go from 0 to i < tall, then you don't need to subtract 1 from i.
}

I have iphone 4 . I don't know how that happened that the normal color on all icons changed ( for example, normally green color phone icon is now purple color ) and photo pictures turned negative ( ghost-like ). Your help will be appreciated .

I have iphone 4 . I don't know how that happenned that the normal color on screen and all icons changed ( for example , normally green color phone icon became purple color ,) and photo pictures turned negative appearance ( ghost-like ) . Any idea how to fix this mishap ? Your help will be appreciated.

Hi kshieh
You can try two possible steps:-
1]Triple click the home button. You should get an accessibility menu.deselect the negative/black and white option.
2]Go to settings->General->accessibility->and deselect invert colours.
That should fix it
Rithwik

Hiya i have an ipod and it comes up with the connect itunes but my computer no longer works how would i be able to make it work plz ?

Hiya I have the 1st generation iPod and the connect to iTunes symbol come up and I no longer have a computer is there anyway I would be able to use it

You have to find a computer with iTunes and an internet connoction and
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

How would I be able to tell if root was changed for remote hack ip tunnel

Similar Messages

Maybe you are looking for