How would I create a PDF with dynamic spelling notations intact?

Hi Everyone,
Is there a way to print a PDF version of everything I see on the screen when I run the Dynamic Spellcheck in InDesign? I'd like to send everyone on my staff a PDF proof that includes all of the spelling suggestions.
I would be extremely grateful for your help. Nothing I've tried seems to work, and this forum is my last hope. Thank you!
Brian

Check this site: http://www.kerntiff.co.uk/products-4-indesign/spellproof-id
Using it, and it works great. There is an option for highlighting words which can be turned off, if you just want the dynamic "squiggles".
It works with printing, but if you want a PDF you have to create the PDF as a postscript and then distill it.

Similar Messages

How do I create a PDF with a resolution of 300 or 600? Where is the control in X Pro?

How do I create a PDF with a resolution of 300 or 600? Where is the control in X Pro?

You change the PDF Maker conversion settings or PDF printer conversion settings.
PDF Maker Conversion Settings.
Open any office application, click on "Acrobat" in ribbon.
Click on "Preferences".
Click on "Advanced Settings".
Now, you can change the resolution as per your requirement.
PDF Printer Conversion Settings.
Click on File -> Print
Select "Adobe PDF Printer".
Click on "Printer Properties".
For more details, please refer to http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7f0f.w.h tml
Let me know, if you need more information.
Regards,
Deepak

How can I create a PDF with flowing columns?

I need to write a script that takes my input data and creates a PDF file that has flowing columns - that is to say, where I give it a long chunk of text and that text is automatically broken into two columns where the text flows down column 1 and when it hits the bottom of the page it starts filling up column 2. I've been playing with enscript and pstopdf and they can do that, the problem is that I also need some sections of the PDF that aren't in 2 columns.
I can probably explain this better with an example - assume my long chunk of text is the alphabet, I need my PDF to look like this:
[Page 1]
Header 1
Header 2
Header 3
A   E
B   F
C   G
D   H
[Page 2]
I    K
J   L
Header 4
Header 5
M   N
[Page 3]
O   R
P   S
Q   T
I tried generating an HTML file and converting the HTML to PDF inside Safari, but while the HTML looks good, WebKit drops the ball and forgets about the columns when converting to PDF.
Is there a way to create the document in sections and then somehow combine them into one final document?
Thanks,
Chris

I see I forgot some important points, sorry ...
This needs to be part of an automated process, the data will be different each time which makes it difficult to calculate how much will fit in a given column on a specific page.
The machine doing the processing does not have Microsoft Office on it, but I could install Open Office for sure and possibly Pages, although I don't know their scripting languages so I'm not sure whether that would take more time than I have ...
Thanks,
Chris

How can I create a PDF with embedded fonts (not a subset of the font) from Excel?

I need to create PDF's from Excel spreadsheets. The PDF needs to have embedded fonts but every time I create one it only has a subset of the embedded font. I have tried setting preferences in the Acrobat add in (unchecked the "Subset Embedded Fonts" option and also tried with the Subset Embedded Fonts checked but the percentage set to only 1% in an attempt to force full font to be embedded.)
I also tried opening the resulting PDF with Acrobat Pro XI but could not figure out how to add the font in.
A method to accomplish the results from either tool would be great.

Anna;
Unless you can add those fonts to your system via the Font book and then substitute them in iPhoto, you'll have to either user the available fonts or create your own pages, 8.5 x 11, in an image editor like Photoshop Elements and use them on pages that are one photo per page. Other's have done that with some success.
If you has PS or PSE create an 8.5 x 11" canvas at 300 dpi. Then you can add your photos, add text (if PS can use the text), and create your own layout.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How can I create a pdf with exact rgb colours

I would like to create a pdf from a word file with exact the same rgb colours. I tried a lot of pdf-settings, disabled colourmanagement etc.- but the rgb-colour is always different. Same Problem with Illustrator etc.

Hi steffenoberlaender,
Could you please let me know what version of Acrobat and MS Office are you using.
Try exporting any other word file to PDF and check if this could be a document specific issue.
If possible, share both the sample word and PDF file with me via email so that I can check at my end.
I have sent you a private message with my contact ID details.
Regards,
Anubha

How can I create a PDF with cad layers visible and switchable?

I am producing CAD drawings in Vectorworks 2013 on a Mac OS X 10.6.8. I can export these as Autocad .dwg files and read them in E-Drawings viewer but do not have Autocad. I want to create a PDF of a drawing for a client to use which will display Vectorworks classes (Autocad layers) and they will be able to turn these classes (layers) on and off. I understand the client has received such files from other parties (probably using Autocad).
Derek E

Hi steffenoberlaender,
Could you please let me know what version of Acrobat and MS Office are you using.
Try exporting any other word file to PDF and check if this could be a document specific issue.
If possible, share both the sample word and PDF file with me via email so that I can check at my end.
I have sent you a private message with my contact ID details.
Regards,
Anubha

How to create fillable PDF with dynamic content dropdowns?

I'm creating a March Madness bracket for people that don't really understand how they work. What I'd like to do is have dropdowns for each of bracket lines (they would list the teams playing against each other for that game and they would select who they think would win). I would then like the dropdown for the next game to auto-populate with only the two options for the next round.
For example, team A and team B play against each other and teams C and D play against each other. There are two separate dropdowns, one with A and B as choices and the other with C and D as choices. The user thinks A and C will win their games, so the next dropdown would only have the options of selecting A and C. To illustrate:
AA and B are listed in the dropdown, and the user selects A to win.
BA or C are listed in the dropdown because the user has selected A and C to win their previous games.
CC and D are listed in the dropdown, and the user selects C to win.
D
I can make the first round dropdowns just fine, but I'm not sure how to conditionally/dynamically populate the second round dropdowns based off of user selections.

I don't understand your request but my english is not the best.
But here you can see a script. You can copy this in the first dropdown in the exit-event.
In this example you will give the first dropdwon the entries
"123"
"345"
"678"
The first case describes what happens when the user clicks "123" the second drowdown will get the entries "456" and "789".
When the user clicks "456" the second drowdown will get the entries "123" and "789".
I think you can adapt this script as you need.
Hope I could help a little bit,
Mandy
switch (xfa.event.newText)
    case "123":
        DropdownListe2.clearItems();
        DropdownListe2.addItem("Please select a value");
        DropdownListe2.addItem("456");
        DropdownListe2.addItem("789");
        DropdownListe2.selectedIndex = 0;
        break;
    case "456":
        DropdownListe2.clearItems();
        DropdownListe2.addItem("Please select a value");
        DropdownListe2.addItem("123");
        DropdownListe2.addItem("789");
        DropdownListe2.selectedIndex = 0;
        break;
    case "789":
        DropdownListe2.clearItems();
        DropdownListe2.addItem("Please select a value");
        DropdownListe2.addItem("123");
        DropdownListe2.addItem("456");
        DropdownListe2.selectedIndex = 0;
        break;
    default:
        break;

How would I create a screen with links after a person logs into their computer?

I have been asked to create a custom welcome screen that would load after a person logs into their computer . This screen is to have links to a couple of items.
but I need this to show after they log in and before they see their desktop.
How do I do this or even accomplish this?

According to your description, it really seems like a start screen in Windows 8\8.1, after user logs on to the system, he will first see a "start screen" with tiles (links to an App) on the screen, then he can manually swith to the classic desktop if he
want.
But in Windows 7, I never saw this kind of settings, for VB6 and HTA page, seems more related with development, if so, I suggest you post in this forum
Scripting Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
and VB Forumhttp://social.msdn.microsoft.com/Forums/en-US/home?forum=vbgeneral
Regarding to a trigger when a user logs on, you can refer to the following link
http://www.grouppolicy.biz/2010/01/how-to-schedule-a-delayed-start-logon-script-with-group-policy/
or
http://technet.microsoft.com/en-us/library/cc758918(v=ws.10).aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

How do I create a PDF with all my contacts from my address book*

There is an option under "File" to "Export as a PDF" but that is just for one contact -- I want all of them exported to on PDF. Please help.

Select a group or All Contacts and then export as PDF.

How to create a pdf with the correct size?

Hi there
How do I create a pdf with the correct size? I created several albums and ordered them. Now I want to backup the album and I know how to create a pdf, but when I choose A5 it's to big, when I create my own size it's not the size it should be. The original (made with iphoto) is a small size album 200x150mm. But when I create my own size (200x150) it shows some white borders.
Does anybody have some tips ore workarounds?
Yuri
Imac
Iphoto 11 (9.4.2)

Books are designed for and printed on 8.5 x 11 inch stock, US Letter size. You shouldn't have to select any size. While viewing the All Pages mode in the book Control-Click on the page and select Save Book as PDF from the contextual menu.
That will create a PDF that iPhoto uses to upload and print. Not all pages will be the same size as the dust jacket will be present in it's full size, 32.8 inches x 8.91 inches:
If you want a PDF that's designed for your own printing the type Command+P while viewing the All Pages window. In the first print window click on the PDF button. It will present you with a contextual menu where you should select Save as PDF. That will give you an 8.5 x 11 PDF file with all pages the same size.
OT

Creating context node with dynamic type

When we are creating context node thru wizard, Dictionary type must be filled. I'm trying to create Context node manually.Did any one tried created Context node class with Dynamic type.

Hi Prasad,
I have a similar requirement.
Can you please share with me how did you create context node with dynamic table data?
Thanks
Vicky

How do I create transparent text with gradient stroke?

I'm creating text that will be printed on a deep gray to black tshirt.
I created text, added an offset path to it with a gradient, and a deep gray color fill on top, achieving the gradient stroke. However, I'm not exactly sure what color the shirt itself will be, other than deep gray to black. And I didn't want the deep gray/black fill in my text to appear and look awkward on the shirt. Unless that is something I shouldn't be considered about.
To be safe, how would you create transparent text with a gradient stroke? I'm using Illustrator CS5.

aimsrandom,
Based on a guess that you wish to have the stroke fade into the basic tshirt colour, you may use transparency rather than colour.
But the transparent text in the headline raises a few questions.
No fill colour for the Type/text, or different fill and (basic) stroke colour, or?

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

How do I compress a pdf with Create PDF so that I can attach it to e-mail?

How do I compress a pdf with Create PDR so that I can attach it to e-mail?

Hi, Blue Mamba.
Your file is automatically compressed when using the CreatePDF service to convert from some other file type (e.g. Word, Excel) to PDF. For example, most PowerPoint files get compressed 50% to 90% over their original size.
If there is a particular file you're converting to PDF using the CreatePDF service, and you are not seeing the size savings that you would like, please provide more details.
Thanks.
Dave

How can i create a button with a dynamic picture?

How can i create a button with a dynamic picture using
mcLoader.loadClip
I did create one with it doesnt seem to be working. It loses
all its
functions (eg onPress onRelease)
Thanks

I solved thep roblem anyway creating a mc.. then creating
another MC withing
the first MC and i change the picture on the second MC. And i
apply the
propierities to the first MC , and works
If i have troubles with mu sistem on the future I will use
yours!
Thanks!
"the fleece" <[email protected]>
escribi� en el mensaje
news:e67i88$jlf$[email protected]..
> the image loading will remove any properties or
functions the mc had.
>
> you need to apply them in the onLoadInit function
>
> mclListener.onLoadInit = function(target_mc:MovieClip) {
> target_mc.onRollOver=blah blah
> };
> var image_mcl:MovieClipLoader = new MovieClipLoader();
> image_mcl.addListener(mclListener);
> image_mcl.loadClip(blah, blahblah);
>
>

How would I create a PDF with dynamic spelling notations intact?

Similar Messages

Maybe you are looking for