How would I know if I need a new battery? (for iphone 4)

My iphone 4 won't turn on. I tried two different sync cords. Plugged it into a wall outlet, PC, and a laptop... it does no good. It charged fine up until now. Even used terminal cleaner. I dropped it in a toilet about 4 months ago. I soaked it in rice for 2 days and since then I've used it daily without a problem. I often leave it plugged in all night though. Is it the battery?

Hard to diagnose in a Forum... Take it in to Apple and have it checked.

Similar Messages

How can i get a new battery for iphone 4s

i need a new battery for my iphone 4s where would i be able to get one .

Take it to Apple. If you have a 4S with a faulty battery it will be covered by the warranty.

HT1688 I need a new battery for my AT&T Apple I 5 phone , I need to make appt for tonite at Destiny Syracuse for 6:30 and I cannot download safari on my computer to make a reservation.

I need a new battery for my AT&T Carrier, Apple I 5 phone, need to come in 6:30 tonite. Thanks. My cell phone dead. SO please write me back to confirm.
<Personal Information Edited by Host>

No, maybe you should get one but the reset of us can figure out how to use the internet and complex things like Google.
What makes you think you need a new battery anyway? It should not be bad on an iPhone 5 and besides which Apple uses batteries from the same manufacturer that other makers do.
And stop shouting at us you are acting like a spoiled child.

TS1424 I need a new Battery for my I POD. I POD will not hold a charge for more than 10 songs. Model # = M9800LL - Version = 1.4.1

I need a new Battery for my I POD Touch. I POD will not hold a charge for more than 10 songs.
Model = M9800LL
Version = 1.4.1

The battery in the iPod is not user-replaceable. Take your iPod to an Apple Store or contact Apple Support and they can arrange replacement.
http://www.apple.com/support/ipod/service/faq/
Regards.

I need a new battery for my Iphine 4S

i need a new battery for my Iphine 4S,,i looked on amazon but not apple brand

Apple only replaces parts through their stores. I reccomend making a genius bar reservation first to see if there is a hardware problem covered under warrenty. If you have applecare and your battery has failed, they will replace it for free, if not it is 79.00. In fact I just went in due to problems with my 5's battery, they replaced it immediatly for no charge. It takes about a half hour at an authorized store.

How Do I tell If I need A New Battery?

I have a 1200MAH battery in my which I bought 17 months ago, until 3 days ago the battery was working great. Then quite suddenly (over 2 days) the battery life degraded, I charged it up to 98%, left it 12 hours & now it's at 43% with no use. Does this mean I need a new battery? I'm not annoyed about this, I accept they do fail after some time but I cannot find anywhere on the forums or on the Palm literature how long a battery is expected to last (yes I know it depends on use). I rarely use the phone, camera, E_Mail, internet, etc. and mainly use the PDA functions.
Can anyone help?
Post relates to: Treo 680 (Unlocked GSM)

Hi, and welcome to the Palm Community Forums.
For the battery to have crapped out that suddenly does seem a little weird, but I suppose it's possible. Any chance you might have been playing with something that was left running in the background, like PocketTunes? If you have background play turned on, and you don't actually stop the music from playing, it'll keep on going. But then, you would probably hear it from the speaker.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How do you know if you need a new iPod touch battery

Ok so a couple of days ago I put my ipod on the charger and it was charging but itwas starting to get really hot so I just disconnected it. When i disconnectd it it was fully charged but when i went to go use it it was only 2% left so i just it die (it was already doing that) So yesterday morning i connected it to its charger and the sign with the red battery and the lighting bolt showed up and it stayed on the charger for about three hours then when i went to go check it the same sign was there so i just took it off the charger for the day so i connected it again and its does the same i tried holding the power and homw buttons together and all it does is blink off and show the same sign does this mean i need a new one? P.S about a month ago i did drop it in water and i sat it in rice for two days and it started working just fine after.

- You can get a new one. You will get a 10% recycling discount if you purchase a new one and turn the old one in.
- You can also exchange your iPod for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
- You can also make an appointment at the genius Bar of an Apple store and hear what they have to say. It is free.

HT1510 What are signs of needing a new battery for an iPod Shuffle 2nd generation?

I have an iPod Shuffle 2nd Generation that is about 4 years old. Sometimes it won't turn on, charge, and even not show up on my computer when it's plugged into it. I put it on the charging dock and sometimes the light won't even come on showing that it's charging. Could that be the battery or the iPod itself??
I hope someone can help me!! I am severely lost without my music!!!!!!
Thanks!

Did it previously work properly and reliably with this computer? If it did, and it does not now, and nothing else has changed, such as connecting new USB devices to the computer, or using the shuffle through a USB hub (instead of connecting it to a direct USB port on the computer), then it may be a problem with the battery. A 2nd gen shuffle would actually be about 5 or 6 years old at this point.
If you have connected new USB devices to the computer recently, as a test, you may want to try shutting down (powering off) the computer and disconnecting all USB devices (including any hub), except standard keyboard and mouse (if used). Then start up the computer, run iTunes, and connect the shuffle to a direct USB port on the computer. Is there any difference?
If this is a new computer, it may be something else. Please post back...

How do you know you need a new battery

how do i know if i need a new battery in my ipod touch

Typically when the battery live becomes too short for your needs. However, some time the battery will suddenly dies and the iPod will no longer work.
Also see:
Accurately determine your iPod battery life

What is the print program for adobe form MEDRUCK_PO, How would I know that?

Hello All,
I am new to ADOBE forms and I have a requirement to develop a new Purchase Order Adobe Form . I need to confidure output types too. I am copying 'NEU' to 'ZNEU', and form name 'MEDRUCK_PO' to 'ZMEDRUCK_PO', but what would be the program name and form routine? How would I know the program name and form routine for new output type/form combination.
Any kind of help is highly appreciated and rewarded.
Thanks in advance
Abaper

I am working on exactly same thing - customizing pdf form MEDRUCK_PO.
I copied MEDRUCK_PO to Z_MEDRUCK_PO and put my changes into the form.
You will use transaction SPRO to display the current routine and form and put your changes into effect.
SPRO-> click tab SAP Reference Image->Material Management->Purchasing->Messages->Forms(Layout Sets) for Messages->Assign Form and Output program for Purchase Order.
In the Form column change the form name to yours - Z_MEDRUCK_PO for example. You can also change the routine name if you want.
Take a look at SAPFM06P, specifically at includes FM06PE03 and FM06PE04.
You will find routines adobe_entry_neu, adobe_entry_mahn and adobe_entry_aufb in FM06PE03. They call routine adobe_print_output located in FM06PE04.

CUDA-OPEN CL IS ENABLED - How would I know?

After backing up my working OS, I attempted to try latestSG updates with Mavericks.
I know, what was I thinking...?
Mac Pro Early 2009
32 Gigs Ram
CUDA Version 5.5.28
Nvidia GTX 285
Mavericks
SGworks ok with native SG - LUTs and masks dont kill playback. Lots of caching.
Is it using open CL?
THE QUESTION: HOW WOULD I KNOW IF IT IS?
How can we check if GPU is being ultilised? Unlike all AE,PP, ME and proper adobe apps, SG doesnt give me any indication of whats going on. This is rubbish.
If I grade same clip via Direct link plays back at one fame per second..
Sending a DL'ed grade back to premiere give me no image, just a 'Media Pending Link' - unless I turn off the embedded Lumetri effect.
Could anyone tell me what CUDA drivers I might roll back to to get this working?
I mean, it was tested with a specific set of 'current' drivers, right?
sidenote: After Effects CC also refuses to utilise this card, which is plenty fast for most things.

Same test with Mountain Lion
Mac Pro Early 2009
32 Gigs Ram
CUDA Version 5.5.28
Nvidia GTX 285
Using CUDA in PP, playback was leagues better than Open CL. But still crappy with any sort of mask in play.
Using Direct Link within Speedgrade with Single Primary layer is great.... but utterly unusuable if you add masks. (who does that eh?)
Even if you add empty grading/adjustment layers playback also nosedives, so the hope I had of isolating my masks on separate adjustment layers doesnt help, as it makes working in SG terrible.
You cant really crossfade multiple SG adjustment layers in PP, as the vignettes need to be the same group as the grade for the transition to act it properly (or nested, but that's not the point of this workflow).
When you talk about using Nvidia Cuda GPU accelaration not being available for Speedgrade, how does impact on it's use along the whole pipeline? You need to be clear about where Cuda/CL impacts on performace, and not waste everyone's time discovering the grizzly truth. How many posts are reporting the same problems, again and again.
What if you are outputting your graded edit in Premiere to AME (which also has CUDA/CL options? If I render SG graded edits in AME from Premiere - using Open CL adds about 50% to the rendering times.
Despite having 32gigs of available ram, SG insists on caching to disk - why?
Admit that the performace using masks is Direct Mode is not ready for production, and stop trying to pretend it is.
Update the information links on this forum, as many are out of date, or point to previous versions.

HT1476 How would I know when does the iPod touch completes charging?

Since the iPod touch doesn't display a battery percentage, how would I know when the charging is completed? In iOS 6 and earlier there would be a plugged-in icon meaning that the device is charged, but in iOS 7 there is only one icon that can mean both charging or charged.

Battery icons
The battery indicator icon in the upper-right corner of the screen shows battery charging status and about how much charge is left in the battery. When connected to a power source, a small lightning icon will appear next to the battery icon:
If the battery charge is very low, the device may display a black screen with an empty battery icon, indicating that the battery needs to charge for up to ten minutes before you can use the device. If the battery is extremely low on power, the device may display a black screen for up to two minutes before one of the low-battery images appears; continue to charge the unit for at least 30 minutes or until it is fully charged.
Yes I already saw this article before and this doesn't help ansewering my question. For iOS 6 and earlier, there would be a lightning icon in the battery when it's charging. If it's charged then there would be a plugged-in icon in the battery. However, the lightnight icon besides the battery in iOS 7 stays the same all the time as long as it's plugged into the charger. So I have no idea when does it finishes its charging, as it doesn't even show battery percentage like iPhone does.

HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How would I know that my phone is not fake?

My iphone4 have a different regulatory logo printed at the back than the usual iPhones here in my country, how would I know that my phone is not fake? i bought it from Thailand but its regolatory logo seems to be 'South Korea'.

These days it is pretty difficult to spot fake ones. You can always compare your specs to the ones listed on Apple's official iPhone page and see if it matches up.
A few things fake iPhones can have that real ones dont: FM Radio, Expandable storage, colors other than black or white, Dual-Sim, stylus use (not compatible with a real iPhone), removable battery, lack of wi-fi or bluetooth. And of course if you can't use it in iTunes, that's a giveaway.

How would I know if any one post a thread in the Forum

Hi All,
Please tell me how would I know if any body post a thread in the forum??
Regards
krishhna

Hi,
I just read the "Suggestions and comments" forum and I found out that you did create a thread called "How would I know if any one post a thread in the Forum ".... So I knew that some one had posted a thread in the forum...
Regards,
Oliivier

How would I know if I need a new battery? (for iphone 4)

Similar Messages

Maybe you are looking for