How would I know which Folio ID listed in the consolidated fulfillment report corresponds to which folio in Producer?

Specifically I want to separate the iPhone 4 size downloads from the iPhone 5 size. I know if I had Adobe Analytics I could get to that easily – but that’s a few months out for me. I can see three different Folio IDs for the same issue number, I just want to confirm which folio ID goes to which device size.
Thanks
Thad

You probably had to upgrade to Designer 2013 because MS has upgraded most of Office 365 to SharePoint 2013, but 2010 sites are still running in backwards compatible mode. Either way if you go to Master Pages in SPD in your site and highlight each master
page you'll see the buttons in the actions section of the Master pages tab. The current master page will have Set as Default greyed out because it is already the master page being used. take a look at the outlined section below.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

Using the RFC adapter (sender), how do I know which RFC is being sent?

Hello everyone!
Has anyone used the RFC adapter (sender) in XI to pick up RFC messages? How would I know which RFC is triggered for example when a user creates a PO (purchase order)?
Warm Regards,
Glenn

Glenn,
When u are writinfg RFC program, u will have destination right? There u know u have to give RFC Destination(SM59) while creating RFC destination we will be giving Program ID .
Similarly in XI while creating Sender RFC u have to give the program id. So with these program id these programs are linked together and triggered from R/3 to the exact Sender adapter.
Please see Michal weblog for more details
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
I hope it clears your doubt!!!
Best regards,
raj.

How will I know which Scenario is my message using?

I have a problem figuring which scenario is my message using. We have this interface which has 2 similar scenarios. The scenarios are actually the same-everything inside it-the only difference is the scenario name. How would I know which scenario is the message using? I tried looking into the trace but I cannot find it there.

Mary,
As replied in the above posts, U can not create two sender comm channel or receiver determination for same interface from same source. As told, ur objects might have been copied to two scenrios which you have also confirmed.
Scenario name can be treated just as a container to hold the objects logically which belong to one process. It doesnt have any role in the execution of ur process.
You can try to change ur objects in any one scenario & same will be replicatd in other scenario also. So if I m nt wrong, I will conclude that scenario name is jst to combine the objects & doest have ny role in execution of process in XI.
Regards
Sushil

How can I know which link was clicked in the link list

Hi everyone
I'm using list of links in my page to display list of the files in some directory.
How can I know which link user was clicked. There are some code:
<%
String dir = "..//files//";
File fin = new File(dir);
File files[]=fin.listFiles();
for(int i=0;i<files.length;i++)
File x = files;
%>
<%=x.getName()%><br>
<%
%>
Please help

You need to pass some data on the querystring to the page you are linking to.
<a href="Main_Work.jsp?file=<%=x.getName()%>"><%=x.getName()%></a><br>
This will send a parameter called "file" with the value of the file name that the user clicked.
Now in Main_Work.jsp you can access this data as follows:
<%
String s = request.getParameter("file");
File f = new File("..//files//"+s);
%>

Why doesn't iTunes copy all my files, and how do I know which it left out?

Hello,
I had iTunes on my old PC, and when I installed it on my new one (Vista Home Premium), it very helpfully deleted everything off my iPod and copied it all back again! As it happens, the only files on the iPod were from the iTunes library, so it didn't matter, but it was annoying.
Anyway, now it has (supposedly) synched my library and iPod, if I look at the library, it shows 1164 songs. If I look at my iPod, it only shows 1157 songs.
How do I know which songs iTunes didn't copy over? More to the point, anyone any idea why it didn't just copy all of them?
Thanks for any help.

OK, thanks for all the replies.
hmacross: I have checked for duplicates, and there were some there. This was because when I installed iTunes, it insisted on scanning my entire hard disk and adding every audio file it could find, even though I didn't want it to. I only wanted it to add ones in my Music folder. I had to do a fair amount of work to clean this up! Anyway, I just checked again, and there aren't any duplicates in my iTunes library.
Chris: If I look in my iTunes library, and show all the audio files as a big list, at the bottom it gives me the total number of files, and the total play length. If I look at the iPod, I see similar numbers.
After some tidying up, the iTunes library shows 1149 songs, and the iPod shows 1147 songs, so there's still a discrepancy. I have double checked for duplicates, so that's not the issue.
Thanks again. Any further help would be appreciated.

When contacts have a number in common, how do I know which is calling?

Many of my contacts work, or live at the same place, as other contacts. How do I know which one is calling? My iPhone 4S (iOS 6.1) caller ID will display "John Smith and 4 others". I thought, if I put a contact called "Smith Residence", it would display that instead of John Smith and 4 others. That didn't work.
Then I tried linking the contacts to the "Smith Residence" listing, but that didn't work.
Then I thought I'll delete the people and reenter them, leaving only "Smith Residence" . That didn't work.
It doesn't seem to be the order that the contacts were entered, which decides the contact to display. It doesn't seem to be the one that others are linked to that displays. So, what is it that decides which contact displays when I get a call from a particular phone number, if that # is common to many contacts?
How can I choose which of my contacts will display?

OK I think I get it. My contacts are sorted by first name and because (alphabetically) "John Smith" is before "Smith Residence", it will always show "John Smith". Now I have something to work with; I just need to know what alpha rules iOS uses. Anyone???
Word:
*Smith residence
1 Smith residence
John smith
Smith residence
Smith residence
-Smith residence
Excel:
Smith residence
*Smith residence
1 Smith residence
John smith
Smith residence
-Smith residence

I've just send to repair my retina display and I'm no very sure that they replace it for a LED one . How I could know which kind of display I got now??

I've just send to repair my retina display and I'm no very sure that they replace it for a LED one . How I could know which kind of display I got now??

If you head over to ifixit.com, you can check out their replacement guides for each of the items you feel needs replacing. The cost for the parts is listed there. It would be that cost + labor at an Apple store. I'm not sure if they would replace things that are cracked as that is cosmetic damage and doesn't affect how well (or poorly) the computer works. You would have to bring it to a store and ask.
~Lyssa

How do I know which ssd is compatible with my MacBook Pro..

My MacBook Pro would not boot up. Took it to the Genius Bar and found out that I need a new hard drive. I want to replace it with a Solid State drive, but how do I know which one is compatible with my particular machine?
<Personal Information Edited by Host>

On a late 2008 MBP, you want an SSD that can handle Sata 1/2/3 so it can be used in this machine, and can be migrated all the way to a 2012 SATA machine. Machines later than 2012 primarily use PCIe flash and are not considered user-replacable.
I have used a Samsung 840 Pro 256GB in a 2008 MBP. You can look at Crucial, OWC, Intel, Samsung brands.
Please see this guide - https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2008+and+Early+200 9+Hard+Drive+Replacement/841

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

Thanks, this is not an ideal answer but probably the most sensible one in my case.
I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage.

How would I know that my phone is not fake?

My iphone4 have a different regulatory logo printed at the back than the usual iPhones here in my country, how would I know that my phone is not fake? i bought it from Thailand but its regolatory logo seems to be 'South Korea'.

These days it is pretty difficult to spot fake ones. You can always compare your specs to the ones listed on Apple's official iPhone page and see if it matches up.
A few things fake iPhones can have that real ones dont: FM Radio, Expandable storage, colors other than black or white, Dual-Sim, stylus use (not compatible with a real iPhone), removable battery, lack of wi-fi or bluetooth. And of course if you can't use it in iTunes, that's a giveaway.

How can i know which index will be used when executing the query ?

1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?

Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool

How do you know which fields are mandatory while uploading PO using BAPI.

How do you know which fields are mandatory while uploading PO data using BAPI. in a structure how do you know which fields are mandatory.
and also, where how do you check that, the BAPI function module is executed.
Thanks in Advance.
Naveen.

hi
hope it will help you.
Reward if help.
REPORT zpo_bapi_purchord_tej.
DATA DECLARATIONS *
TYPE-POOLS slis.
TYPES: BEGIN OF ty_table,
v_legacy(8),
vendor TYPE bapimepoheader-vendor,
purch_org TYPE bapimepoheader-purch_org,
pur_group TYPE bapimepoheader-pur_group,
material TYPE bapimepoitem-material,
quantity(13),
delivery_date TYPE bapimeposchedule-delivery_date,
net_price(23),
plant TYPE bapimepoitem-plant,
END OF ty_table.
TYPES: BEGIN OF ty_alv,
v_legs(8),
success(10),
v_legf(8),
END OF ty_alv.
TYPES: BEGIN OF ty_alv1,
v_legf1(8),
v_msg(500),
END OF ty_alv1.
*-----Work area declarations.
DATA: x_table TYPE ty_table,
x_header TYPE bapimepoheader,
x_headerx TYPE bapimepoheaderx,
x_item TYPE bapimepoitem,
x_itemx TYPE bapimepoitemx,
x_sched TYPE bapimeposchedule,
x_schedx TYPE bapimeposchedulx,
x_commatable(255),
x_alv TYPE ty_alv,
x_alv1 TYPE ty_alv1,
x_alv2 TYPE ty_alv1.
*-----Internal table declarations.
DATA: it_table TYPE TABLE OF ty_table,
it_commatable LIKE TABLE OF x_commatable,
it_item TYPE TABLE OF bapimepoitem,
it_itemx TYPE TABLE OF bapimepoitemx,
it_sched TYPE TABLE OF bapimeposchedule,
it_schedx TYPE TABLE OF bapimeposchedulx,
it_alv TYPE TABLE OF ty_alv,
it_alv1 TYPE TABLE OF ty_alv1,
it_alv2 TYPE TABLE OF ty_alv1.
DATA: po_number TYPE bapimepoheader-po_number,
x_return TYPE bapiret2,
it_return TYPE TABLE OF bapiret2,
v_file TYPE string,
v_temp(8),
v_succsount TYPE i VALUE 0,
v_failcount TYPE i VALUE 0,
v_total TYPE i.
DATA: v_temp1(5) TYPE n VALUE 0.
DATA: x_event TYPE slis_t_event,
x_fieldcat TYPE slis_t_fieldcat_alv,
x_list_header TYPE slis_t_listheader,
x_event1 LIKE LINE OF x_event,
x_layout1 TYPE slis_layout_alv,
x_variant1 TYPE disvariant,
x_repid2 LIKE sy-repid.
DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
*-----To fetch the flat file.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK v_b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF p_file IS INITIAL.
MESSAGE text-001 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-----To use F4 help to find file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
v_file = p_file.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM gui_upload.
LOOP AT it_table INTO x_table.
PERFORM header_details.
v_temp = x_table-v_legacy.
LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
PERFORM lineitem.
PERFORM schedule.
ENDLOOP.
DELETE it_table WHERE v_legacy = v_temp.
PERFORM bapicall.
MOVE po_number TO x_alv-success.
APPEND x_alv TO it_alv.
CLEAR x_alv.
*-----To clear the item details in internal table after the operation for a header.
REFRESH: it_item,
it_itemx,
it_sched,
it_schedx.
CLEAR: v_temp1.
ENDLOOP.
v_total = v_succsount + v_failcount.
PERFORM display_alv.
FORM GUI_UPLOAD *
FORM gui_upload .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
TABLES
data_tab = it_commatable
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc = 0.
*-----To fetch the comma seperated flat file into an internal table.
LOOP AT it_commatable INTO x_commatable.
IF x_commatable IS NOT INITIAL.
SPLIT x_commatable AT ',' INTO
x_table-v_legacy
x_table-vendor
x_table-purch_org
x_table-pur_group
x_table-material
x_table-quantity
x_table-delivery_date
x_table-net_price
x_table-plant.
APPEND x_table TO it_table.
ENDIF.
CLEAR x_table.
ENDLOOP.
ENDIF.
ENDFORM. " gui_upload
FORM HEADER_DETAILS *
FORM header_details .
MOVE 'NB' TO x_header-doc_type.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-vendor
IMPORTING
output = x_table-vendor
MOVE x_table-vendor TO x_header-vendor.
MOVE x_table-purch_org TO x_header-purch_org.
MOVE x_table-pur_group TO x_header-pur_group.
x_headerx-doc_type = 'X'.
x_headerx-vendor = 'X'.
x_headerx-purch_org = 'X'.
x_headerx-pur_group = 'X'.
ENDFORM. " header_details
FORM LINEITEM *
FORM lineitem .
v_temp1 = v_temp1 + 10.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_temp1
IMPORTING
output = v_temp1.
MOVE v_temp1 TO x_item-po_item.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-material
IMPORTING
output = x_table-material.
MOVE x_table-material TO x_item-material.
MOVE x_table-quantity TO x_item-quantity.
MOVE x_table-net_price TO x_item-net_price.
MOVE x_table-plant TO x_item-plant.
x_itemx-po_item = v_temp1.
x_itemx-material = 'X'.
x_itemx-quantity = 'X'.
x_itemx-net_price = 'X'.
x_itemx-plant = 'X'.
APPEND x_item TO it_item.
APPEND x_itemx TO it_itemx.
CLEAR: x_item, x_itemx.
ENDFORM. " lineitem1
FORM SCHEDULE *
FORM schedule .
MOVE x_table-delivery_date TO x_sched-delivery_date.
MOVE v_temp1 TO x_sched-po_item.
x_schedx-delivery_date = 'X'.
x_schedx-po_item = v_temp1.
APPEND x_sched TO it_sched.
APPEND x_schedx TO it_schedx.
CLEAR: x_sched, x_schedx.
ENDFORM. " schedule
FORM BAPICALL *
FORM bapicall .
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = x_header
poheaderx = x_headerx
IMPORTING
exppurchaseorder = po_number
TABLES
return = it_return
poitem = it_item
poitemx = it_itemx
poschedule = it_sched
poschedulex = it_schedx.
IF po_number IS NOT INITIAL.
v_succsount = v_succsount + 1.
MOVE x_table-v_legacy TO x_alv-v_legs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
v_failcount = v_failcount + 1.
MOVE x_table-v_legacy TO x_alv-v_legf.
MOVE x_table-v_legacy TO x_alv1-v_legf1.
LOOP AT it_return INTO x_return.
IF x_alv1-v_msg IS INITIAL.
MOVE x_return-message TO x_alv1-v_msg.
ELSE.
CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
ENDIF.
ENDLOOP.
APPEND x_alv1 TO it_alv1.
CLEAR x_alv1.
ENDIF.
ENDFORM. " bapicall
FORM DISPLAY_ALV *
FORM display_alv .
PERFORM x_list_header.
PERFORM build_fieldcat CHANGING x_fieldcat.
x_repid2 = sy-repid.
x_event1-name = 'TOP_OF_PAGE'.
x_event1-form = 'TOP_OF_PAGE'.
APPEND x_event1 TO x_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = x_fieldcat
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_save = 'A'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_master_data
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm selfield
TYPE slis_selfield.
READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
CLEAR : x_alv2,it_alv2[].
LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
x_alv2 = x_alv1.
APPEND x_alv2 TO it_alv2 .
ENDLOOP.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : x3_fieldcat,it_fieldcat[].
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_LEGF1'.
x3_fieldcat-reptext_ddic = text-111.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_MSG'.
x3_fieldcat-reptext_ddic = text-112.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
x_layout1-colwidth_optimize = 'X'.
x_layout1-zebra = 'X'.
IF it_alv2[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = it_fieldcat
i_save = 'A'
i_callback_top_of_page = 'TOP'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv2
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
ENDFORM.
FORM USER_COMMAND *
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = 'Commentry'.
ENDFORM.
FORM BUILD_FIELDCAT *
FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x1_fieldcat TYPE slis_fieldcat_alv.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '1'.
x1_fieldcat-fieldname = 'V_LEGS'.
x1_fieldcat-reptext_ddic = text-108.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '2'.
x1_fieldcat-fieldname = 'SUCCESS'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-109.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '3'.
x1_fieldcat-fieldname = 'V_LEGF'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-110.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
ENDFORM. " build_fieldcat
FORM BUILD_LIST_HEADER *
FORM x_list_header.
DATA: x_list_header1 TYPE slis_listheader.
*-----List Header: type H
CLEAR x_list_header1 .
x_list_header1-typ = 'H'.
x_list_header1-info = text-105.
APPEND x_list_header1 TO x_list_header.
*-----List Key: type S
x_list_header1-typ = 'S'.
x_list_header1-key = text-106.
x_list_header1-info = v_total.
APPEND x_list_header1 TO x_list_header.
*-----List Key: Type S
CLEAR x_list_header1 .
x_list_header1-typ = 'S'.
x_list_header1-key = text-107.
x_list_header1-info = v_succsount.
APPEND x_list_header1 TO x_list_header.
ENDFORM. " build_list_header
FORM TOP_OF_PAGE *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = x_list_header.
ENDFORM. " TOP_OF_PAGE

I have a second generation I Pod touch. How do I know which games I can download from the Apple Store?

I have a second generation I Pod touch. How do I know which games I can download from the Apple Store?

Hello, Suzanne.
Thank you for visiting Apple Support Communities.
Unfortunately there isn't a list available at this time for applications that are specific for your iOS/Software version. However, once you know which iOS/Software version you have installed, you can browser various applications and look for ones that meet your system requirements. I have included a screenshot below on how to look for this information.
iPhone, iPad, iPod: How to find the software version
http://support.apple.com/kb/ht2188
Cheers,
Jason H.

How would I know which Folio ID listed in the consolidated fulfillment report corresponds to which folio in Producer?

Similar Messages

Maybe you are looking for