How would I replace just the (imported) movie portion without having to start over the entire iDVD project from scratch?

I've just added a new ending and want to burn the new version of my iDVD project. How would I replace just the (imported FCE) movie portion without having to start over the entire iDVD project from scratch?

In an attempt to help clarify:
The FCE 3.5 project I first wrote about had 10 chapters and was a mix of stills and transcoded DSLR video clips that measured 58 min in length. After FCE converted it to a Quicktime movie, it exported from FCE to iDVD 7 flawlessly until I was asked to make a last minute change.
My older software wasn't endowed with the ability to "detect modifications". However, Deleting Assets was successful and a revised version of the original video could substituted saving me from starting iDVD over from scratch (thanks to Old Toad). Luckily, the ugly iDVD BUG did not awaken during these procedures. Thanks Bengt W.
I hope this helps the discussion.

Similar Messages

I have a free app on my iphone, i would like to get it to my ipad..how do I get it without having to start over the entire game?

I have a free app on my iphone, i would like to get it to my ipad..how do I get it without having to start over the entire game?

If you use the same Apple ID on both devices, you can share apps, but you won't share the progress I'm afraid.

HT1329 My old computer crashed and I had to get a new one. I was unable to save anything from the old computer. Is there anyway to get my music from my Ipod to my new computer without having to start over with the old cd's again

My old computer crashed and I had to get a new one. I was unable to save anything from the old computer. Is there anyway to get my music from my Ipod to my new computer without having to start over with the old cd's again

Hello cheech07,
The following article contains directions that can help get you back on track with iTunes. I'd recommend picking up at 'Part 5' of the 'External drive' section.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Cheers,
Allen

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

How do I select just the pictures I want from my itouch to my MacBook Pro, I have already picture from my touch already in the iphoto, that don't need duplicated?

Wanting to transfer pictures from my itouch to MacBook Pro, when I connect itouch to Mac, it shows all the pictures on the itouch and some have already been put on, was wondering how you select just the one's I want to import, I've tryed control C, command C, and it doesn't do it. Would you be able to help me thanks.

maxfromwarsaw,
Why do you find it acceptable to yell at this forum, "HOW LONG TILL I GET A RESPONCE?"? We are not here to do your bidding. These forums are read and responded to by users same as yourself; users helping users. Be aware Apple tech support does not reside here.
Users respond to questions at their own convenience based on their knowledge of the question asked.
My suggestion is to go to the iPod Touch forum located at:
https://discussions.apple.com/community/ipod/ipod_touch
Cordially,
RicD

How do i get just the contacts and photos from my back up without downloading anything else?

please help me.
im trying to just get CONTACTS and PHOTOS only back from my backup on itunes but it wont give me the option to do so.
how do i just get contacts and photos?

You don't.
It is all or nothing.
You should be syncing contact with your computer regularly, so they should be in whatever program you have chosen to sync.
You should be importing all pics regularly, so they should be on your computer as well.

How do I restart iOS download after internet crashes without having to start from the beginning.

My internet crashes and stops downloading the iOS restore software for my phone. When I try to restart the download, it starts from the beginning. How can I get it to cary on from where it left off? Why doesn't it do this automatically!?
Thanks.

If you've already unsuccessfully tried to resume the download then the previously partial download may no longer be present on you computer. 
What you can do in such a case is:
* Move the old .part partial download and the 0 byte final file without the .part to another location. 
* Start a new download and pause it, don't close Firefox. 
* Copy the two files (.part and 0 byte final) that you moved above back to the download location to replace the new files that were created. 
* Resume the download in Firefox.

How can i print a one page spread sheet without having it spread over several sheets of paper none of which is complete?

I have an iMac less than 1 year old with lion o/s and numbers. i have been spoiled in the printing of spread sheets on PC's. I find it impossible to print only 1 page when printing a single page spread sheet. The result is my spread sheet spread over several sheets of paper with no usable spread sheet printed. Can anyone help this 86 year old man who has been to the Apple Store twice to learn this but I still have trouble. Thanks in advance for your help. jim

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

How do I update just the day of a date value?

Example:
Table: FC_GQ_SOURCE_ANALYSIS
Sample_type = C
Effective_date = null
Sample_date = 20/13/07/14 09:00:00
What needs to happen is for any sample analysis that has a sample_type of "C" we need the effective date to be the first of the month for whatever month the sample date is and keep the time as it is…
so in the example data the effective date should be 2013/07/01 09:00:00.
How would I update just the day part of that date string?

Hi,
You don't need to convert to a string and back again to do that. Use TRUNC to get the right day, and date arithmetic to get the right time, like this:
UPDATE fc_gq_source_analysis
SET     effective_date = TRUNC (sample_date, 'MONTH')
                             + (sample_date - TRUNC (sample_date))
WHERE   sample_type = 'C'
TRUNC (sample_date, 'MONTH')        is midnight on the 1st of the month that you want.
sample_date - TRUNC (sample_date)   is the time that you want, expressed as a number of days (e.g., 9/24 of a day).

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

I had installed some applications on my iphone from my friend's pc, but now when i downloaded some apps on my pc andtry to sync it says the installed apps on my iphone would be replaced by the one from my pc. how can i retain all and copy new apps

I got some applications like games etc installed on my iphone through a friend's pc.
now when i downlaoded some apps on my pc and try to sync , it says that the existing apps on my iphone would be replaced by the one in my itune library.
what is the way that i can have the existing apps on my iphone to remain and also install new apps when i download without losing the installed ones

I got some applications like games etc installed on my iphone through a friend's pc.
Were these apps downloaded via your own iTunes AppStore account or your friends?
now when i downlaoded some apps on my pc and try to sync , it says that the existing apps on my iphone would be replaced by the one in my itune library.
That's correct. iTunes will delete any apps you have not downloaded through your own iTunes account. If you did use your own iTunes account, choose iTunes > File > Transfer purchases... to move the apps into your own iTunes Library.
what is the way that i can have the existing apps on my iphone to remain and also install new apps when i download without losing the installed ones
Re-download the apps through your own iTunes account (pay for them if necessary). Apps cannot be shared between different iTunes user accounts.

How do I delete just the firefox bookmarks but not the the bookmarks toolbar icons

I deleted my firefox bookmarks so I could import my gooogle bookmarks,but this also deleted my firefox bookmarks toolbar entries...it took me along time to put these in again.
How do I delete just the firefox bookmarks but not the the bookmarks toolbar icons

What kind of problems did you get after installing the extension?
You can try to remove the history manually in the History Manager by doing a search for a colon.
How many history items do you have to remove?
If you only want to do this once or occasionally then you can consider to use this code:
*http://kb.mozillazine.org/User:Dickvl/JavaScript_Error_Console#Expire_History_By_Days
You will have to calculate the number of days that you want to keep to remove only history items from 2013 and older (365+31+28+26)
You can open the Browser Console (Firefox/Tools > Web Developer).
Paste the JavaScript code in the command line and press the Enter key to run the code.
*Toggle the devtools.chrome.enabled pref on the about:config page to true to enable the command line
*https://developer.mozilla.org/Tools/Browser_Console#Browser_Console_command_line
<pre><nowiki>
(function(){
/* expire history by days, based upon bug 660646 comment 5/7 - [email protected] */
var Cc = Components.classes, Ci = Components.interfaces;
var his = Cc["@mozilla.org/browser/nav-history-service;1"].getService(Ci.nsIBrowserHistory);
var prs = Cc["@mozilla.org/embedcomp/prompt-service;1"].getService(Ci.nsIPromptService);
var day = 0, obj = new Object, txt = "Expire History"; obj.value = "90";
if (prs.prompt(null,txt,"Days of history to keep",obj,null,{})){
day = parseInt(obj.value);
if(!isNaN(day)&&(day>0)){
his.removeVisitsByTimeframe(0,(new Date().setHours(0,0,0,0) - day * 86400000) * 1000);
}else{ prs.alert(null,txt,"Error Parsing Days: "+obj.value); }
</nowiki></pre>
If hat doesn't work then you may have a problem with the places.sqlite database file and you may have to reset places.sqlite.
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
You can move (copy/paste) history items that you want to keep to a bookmarks folder.
See also:
*Norwell History Tools: https://addons.mozilla.org/firefox/addon/norwell/

How can I get just the text to resize, rather than the entire web page?

I used to be able to re-size just text on a webpage by typing Ctrl + +. Today, the entire webpage re-sizes, and when I move to another page it reverts. (I see this mostly in Facebook.). Why did this change, and can I go back to having just the text re-size?

''How can I get just the text to resize -- zoom text only''
steps
#"Alt" if no menu bar, then
# View > Zoom > Zoom Text Only
Zoom text of web pages - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Zoom_text_of_web_pages
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

If I put an item in clippings that I reduced from a larger article, how do I print just the clippings excerpt?

If I put an item in clippings that I reduced from a larger article, how do I print just the seperate clippings excerpt?

Hi Mark,
I think one thing you may missing is an understanding of the purpose and operation of the mail merge process.
Mail merge is used to 'personalize' a preset document using information from the records of a database. Any content that will vary from copy to copy of the document must be imported from the database. Every item that is specific to the copy being sent to a specific individual must be included in the row of the table containing the record for that individual.
For invoices, unless you are sending an invoice for the same item(s) at the same price(s), you'll need to either include the items and prices in the database and merge them into the invoices, or use the merge document to create a document containing an empty invoice for each customer, containing only the customer identification information, and the company information (taken from the card marked "My Card" or "Me"), then fill in each invoice manually.
The Pages '09 template named "Invoice" might word with the second approach, depending what type of document the merge to file option produces. If it's a Pages document, the table, containing the invoice data, will likely be useable; if it's a pdf document, the table may be editable (or not), but will lose its ability to calculate the tax amounts and totals.
To produce an individual invoice from this template:
Open the template.
Drag the recipient's card from Contacts/Address Book and drop it on one of the fields in the first block of address text.
Enter the project information in the second block of text.
Check the Company block in the left margin for correctness.
Enter the Invoice items and quantities in the table.
Print (or Print to PDF) the document and mail it.
Regards,
Barry

HT5278 If I reset my iPad 1 to factory settings, how would I then update the iOS to 5.1.1

If I reset my iPad 1 to factory settings, how would I then update the iOS to 5.1.1?
As I believe the update would fail as it would be attempting to update to iOS 7 which is 'above its paygrade' or at least this is what an apple genius told me...
He said he thought I would need to find an old version of iTunes containing the correct version of iOS. But he was not very confident about what he was telling me.
Any help would be much appreciated...

Hmmm
I may be asking the wrong question here, let's back up a little.
I have an iPad 1 running iOS 5.1.1
Over the years it has become a little laggy and sluggish. I am about to replace it and wish to 'recycle' this old one onto my granddaughter.
I want to completely wipe it, and get rid of all traces of the hundreds of app it's had on and deleted, in the hopes that it will clean up any residual crud that's choking it.
Is a factory reset what I'm looking for?
What I had in mind, is what I have done with my iPhone on a couple of occasions which was to completely start over with it and I was sure that that had taken the iOS version back to what it was when I took delivery of it. But I may be wrong...

How would I replace just the (imported) movie portion without having to start over the entire iDVD project from scratch?

Similar Messages

Maybe you are looking for