How would i setup certificate authenticated activesync on a windows phone 8 device? Without intune or sccm?

I've searched all over for this and can find no clues in the interface.
We have certificate authentication to activesync, via tmg working well for IOS devices and android, we issue the user a certificate, they use it to authenticate, boom no problems.
We're considering a move to issuing windows phone 8 devices as well, yet i see no way, or instructions on how to actually set these things up to authenticate with a certificate? I see some rumblings about airwatch and sccm with intune, but i don't want to
pay for a subscription just to use this when it works fine without on other platforms.
Can anyone shed any light?
Many thanks,
Jim

Hi - we're authenticating with internally issued certificates against a TMG listener, not sure if that is or isn't mutual certification - I have installed the root on the devices so they are trusted, works great with ios, android etc.
The main issue is there is no place in the setup where you can specify the certificate to use, i have a feeling they (like blackberry) are railroading you into using a paid for mdm solution for cert auth. Be delighted if that isn't the case tho. It is easy
enough to do this for WP8 with SCCM and InTune but i'm not keen on taking out a subscription just for WP8 devices when we can do it gratis with ios and android.
Thanks for the reply.
Jim

Similar Messages

Cannot view certificate protected PDF file on Windows Phone device

I have a certificate protected PDF file that I need to view on my Windows Phone 8.1 device. I can install the certificate on it without any problem, but when trying to open the file with the official latest version of Adobe Reader app, it says something like 'some features in this file is not supported in this version of Adobe Reader' and won't open the file at all.

you can contact the customer service..

How would I upload a photo to my motorola cell phone?

How would I upload a photo to my motorola cell phone?

I am trying to upload a profile photo to www.Logos.com. I did it before with iPhoto 9, but now that I have iPhoto 11, there doesn't seem to be any place on the Share menu item to allow me to just upload -- I have to depend on Logos to do the work.
I can access the iPhoto Library from my Home settings. This brings up all the photos, from which I choose one by highlighting it, and respond on the profile page website "Upload" All I get is a spinning ball and there is no action on my modem that anything is happening. I've never tried to access the iPhoto Library from iMovie. I have had no need to, at least I don't think I have a need.

How to use radioButton(s) and image controls on windows phone 8.1

how to use radioButton(s) and image controls on windows phone 8.1

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to insert pdf file to adobe reader in windows phone 8? which directory?

How to insert pdf file to adobe reader in windows phone 8? which directory?

An other way is to copy the pdf with Windows explorer into the path /documents of the phone. Open Office and choose Adobe Reader. The pdf will be copyed in the Sandbox of the Reader and You may read it. You may delete the PDF in the documents path. It will still be in the Readers sandbox. All without any cloud ;-)!

How do i run a Labview file through a windows phone?

Hello there
How do i run a Labview file through a windows phone or a tablet? is it possible
is there any phone specifications required? or steps?
Thanks alot

Blokk wrote:
na1992 wrote:
hahaha my baad
i mean if i have done my labview file on laptop and i want it to connect my file to a microcontroler using usb or any serial connection, i want a way that my labview file will run if i store it on a phone.
i searhced about exe format but i didnt find enough info
Sorry, but you should define more precisely what is your goal:
" i searhced about exe format but i didnt find enough info"
If you build an exe using Labview, that exe will not run on iOS, or Android, if this is what you ask...
Nor Windows Phone or Windows RT. A LabVIEW exe is compiled and linked for x86 or AMD64 architecture with Win32 API architecture and will only run on Windows for x86 or x64 systems.
Windows Phone and Windows RT are despite the similarity in the name technically completely different platforms to the normal Desktop Windows system, just as different as MacOS X or iOS.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How would you setup users to have different versions of Flash Player?

I am looking to test some setups with different versions of Flash, but wanted to know how to setup one user to have Flash Player Version 6, one with version 7, 8, etc.
How would I go about doing this?
Thanks,
Russ

Create a new folder named Internet Plug-Ins inside the Library folder of the home folder of some of your user accounts, and move the different versions of the plugin into this folder, one per user account. The copy of the Flash plugin in the main Library folder is accessed when an account doesn't have a copy in its home folder.
(13732)

How to properly setup an authentication using remote_login_passwordfile

I'm running Oracle9i for study purposes in a winXP OS
I set the value of the parameter remote_login_passwordfile to EXCLUSIVE
I tried connecting using the following credentials and it was, unexpectedly, successful:
connect scott/tiger as sysdba
how do I properly setup the authentication?
thanks

You need to look into two things
1.connecting directly from the server
2.Connecting from the remote
1.If you are connecting local with the server and if the SQLNET.ora has an entry like SQLNET_AUTHENTICATION_SERVICEs=(NTS) the your OS autntication will take precedence
But when you connect from the client machine
REMOTE_LOGIN_PASSWORD file takeover and you cannot log without a password that was gebnerated during the creation of password file.
If you strictly want passwordfiel authentcation set the SQLNET_AUTHENTICATION_SERVICE=NONE in the sqlnet.ora

How do I get certificate authentication working across multiple domains?

Hi,
I've got LC ES2 set up for certificate authentication and when there's only one domain (with a single certificate mapping set up), it works fine.
However would like to have multiple domains (application specific), with a small set of administrator type users who manage all of the domains.
To test, I've set up two domains, with the admin users in one and the normal users in the other.
I've set up two certificate mapping rules (both for the same CA), one for each domain.
However LC will only authenticate users who are matched using the first certificate mapping rule.
Has anyone else seen/tried this? Have I missed something obvious?
For the moment I'm going to have to work with a single domain, which is a pain, but will have to do for now.
Thanks
Craig
Here's the error I get when LC fails to match (or attempt to match?) on the second cert mapping rule:
2010-05-11 11:23:41,331 WARN [com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean] Authentication failed for (Scheme - Certficate) Reason: Certificate Authentication failed since no user exists in the system that satisfies the certificate mapping . Refer to debug level logs for category com.adobe.idp.um.businesslogic.authentication for further details
2010-05-11 11:36:38,835 WARN [com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean] Authentication failed for (Scheme - Certficate) Reason: Certificate Authentication failed since no user exists in the system that satisfies the certificate mapping . Refer to debug level logs for category com.adobe.idp.um.businesslogic.authentication for further details
2010-05-11 11:36:38,885 ERROR [STDERR] 11/05/2010 11:36:38 AM com.adobe.rightsmanagement.webservices.rest.RestServlet doAction
SEVERE: Unexpected exception in Rest Call
com.adobe.idp.um.api.UMException| [com.adobe.idp.um.api.impl.AuthenticationManagerImpl] errorCode:16423 errorCodeHEX:0x4027 message:Authentication failed for (Scheme - Certficate) Reason: Certificate Authentication failed since no user exists in the system that satisfies the certificate mappingcom.adobe.idp.common.errors.exception.IDPException| [com.adobe.idp.um.businesslogic.authentication.AuthenticationManagerBean] errorCode:12805 errorCodeHEX:0x3205 message:Authentication failed for (Scheme - Certficate) Reason: Certificate Authentication failed since no user exists in the system that satisfies the certificate mapping
at com.adobe.idp.um.api.impl.ManagerImpl.handleException(ManagerImpl.java:251)
at com.adobe.idp.um.api.impl.ManagerImpl.handleException(ManagerImpl.java:194)
at com.adobe.idp.um.api.impl.AuthenticationManagerImpl.authenticate(AuthenticationManagerImp l.java:338)
at com.adobe.idp.um.api.impl.AuthenticationManagerImpl.authenticate(AuthenticationManagerImp l.java:154)
at com.adobe.idp.um.api.impl.AuthenticationManagerImpl.authenticate(AuthenticationManagerImp l.java:162)
at com.adobe.idp.um.dsc.util.dscservice.UserManagerUtilServiceImpl.authenticateWithWSHeaderE lement(UserManagerUtilServiceImpl.java:173)
at sun.reflect.GeneratedMethodAccessor1065.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
at sun.reflect.GeneratedMethodAccessor363.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 73)
at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
at $Proxy179.doRequiresNew(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:145)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:165)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.um.dsc.util.client.UserManagerUtilServiceClient.authenticate(UserManagerUti lServiceClient.java:210)
at com.adobe.edc.server.platform.UMHelper.authenticate(UMHelper.java:549)
at com.adobe.rightsmanagement.webservices.rest.RestFacade.validateClientAuthenticationHeader (RestFacade.java:161)
at com.adobe.rightsmanagement.webservices.rest.RestFacade.getBusinessHandler(RestFacade.java :206)
at com.adobe.rightsmanagement.webservices.rest.RestFacade.getAuthenticationToken(RestFacade. java:226)
at com.adobe.rightsmanagement.webservices.rest.RestDefaultRequestHandler.handleRequest(RestD efaultRequestHandler.java:29)
at com.adobe.rightsmanagement.webservices.rest.RestSecureRequestHandler.handleRequest(RestSe cureRequestHandler.java:13)
at com.adobe.rightsmanagement.webservices.rest.RestRequestRouter.routeRequest(RestRequestRou ter.java:10)
at com.adobe.rightsmanagement.webservices.rest.RestServlet.doAction(RestServlet.java:50)
at com.adobe.rightsmanagement.webservices.rest.RestServlet.doGet(RestServlet.java:37)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:179)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java: 157)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
a
2010-05-11 11:36:38,886 ERROR [STDERR] t org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:580)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Unknown Source)

Craig,
The certificate mapping works in the following manner,
First the User's certificate is validated.
If the certificate is valid, the related Certificate mapping information is fetched.
From the Certificate Mapping information, the domain is determined.
Following this, the user is searched in the domain and checked for it's current/deleted status.
If user exists or is a valid one, then return an AuthResult corresponding to that is returned to the client.
The error log below says, "Certificate Authentication failed since no user exists in the system that satisfies the certificate mapping"
1. Please check if the concerned user exists in the domain registered in the second cert mapping.
2. Also check if the concerned user satisfies the attribute mapping specified in the second cert mapping.
3. Could you confirm whether the admin Users and the normal users are distinct in both the domains and not duplicate in any of them??
Because if same user exists in 2 domains, then there is no way to find out which domain you are referring to. In that case the first domain which declares the user as valid will return the AuthResult.
4. You are using LC ES2, so there is a Test Certificate utlity on the same Certificate Mapping page, which can help you confirm the validity of the user's certificate and then you can proceed.

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
Regards.

HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

Hi,
Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one. Then your purchase will be billded to this new account. Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

Virtual PC and ActiveSync (for a Windows phone): anyone get it to work?

I am currently using Virtual PC 7.0, running Windows 2000, and am trying to get ActiveSync to recognize my USB-connected Windows Mobile 5.0 phone (Sprint PPC-6700).
ActiveSync installs okay, but it fails to detect the phone when it's connected via USB.
When I click on the USB icon at the bottom of the VirtualPC window, the Mobile Phone is listed as being connected. Also, when I look in My Computer (within Windows), a mobile phone device is present). However, ActiveSync cannot seem to "see" that the phone is connected.
Any thoughts?
(I am aware that both Mark/Space Missing Sync and PocketMac are working on Windows Mobile 5.0 versions of their products; however, at this time, only Windows Mobile 2.0 devices are supported).
Thanks!

Just want to add to this...it was resolved the Advanced tab is very important on mail.app.
The Advance tab authentication must match what the Exchange server/Active Directory is using.
For us NTLM is what we need to use.
Also we found that one exchange server had a bad installation while another had no problem connecting via mail.app.
Thus the installation is going to be looked at.

How do I access my iCloud email on my Windows Phone 7

I have an iCloud account but I can not access my email on my Windows Phone 7 Device that i have.
it will not conect to the servers, I even manual put in the correct settings on the phone via Apples Support
iCloud Mail Server Settings.
Any help would be appreciated
Thanks
John

iCloud mail is (a) free, (b) working on my Android phone, and any other phone/mail program that supports Imap, and that is nearly all of them.
Here are the settings for iCloud Mail.

How to disable elasticity property of list view in Windows Phone 8.1..?

Hi,
I am using the ListView control of Windows Phone 8.1. I am using data binding to populate the list items. It works fine. But I am able to pull the list down from the top( ie..When we pull down the list, fist item comes down and the background color
can be seen, and when released it goes back to normal view). As of I understand this is the default behavior of ListView.
How can I change this behavior..?
It should not be rigid but scroll should end where the list item ends, not more than that...
In shot I don't require any elasticity property for the List

Use a custom control.
Windows Phone/Windows Store

How can I capture Microsoft EventSource Events on a Windows Phone?

I use
Microsoft EventSource Library to create events to instrument our applications. For Windows Applications running on Windows 7/8/8.1 I can use xperf
to capture the events (xperf.exe" -start UserLogger -on GUID -f User.etl).
But how can I do this on a Windows Phone 8.1?
I use Win8.1 Pro (x64), VS2013 Community Edition with Update4 and try capture a trace with the custom events on my Lumia 1320 Dev Preview Update Build 8.10.14203.

Hi Andre,
First, sorry about the inconvenience Franklin brought to you.
Developer Power tools can be used to capture ETW log, but I think it will not work for custom events. Check the
thread replied by Eric.
AFAIK, the option to capture custom events only opens to Microsoft OEMs as mentioned in
this article.
And I just found the following uservoice in our
official uservoice channel.
https://wpdev.uservoice.com/forums/110705-dev-platform/suggestions/6101326-enable-collection-of-custom-etw-events-to-etl-fil
I think you can vote on that thread to push that.
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
Alan Yao
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

How would i setup certificate authenticated activesync on a windows phone 8 device? Without intune or sccm?

Similar Messages

Maybe you are looking for